Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.8 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED | |
| 2 | L2₹28.8 L+₹1.5 L (5.64%)Rejected-AOC SANTOKH VILA 81 1ST FLOOR PHASE XI MOHALI PUNJAB 160082 | 160082 | L2 | Rejected-AOC ACCEPTED | |
| 3 | L3₹30.0 L+₹2.8 L (10.2%)Rejected-AOC | L3 | Rejected-AOC ACCEPTED | |
| 4 | L4₹32.7 L+₹5.5 L (20.2%)Rejected-AOC 1542 URBAN ESTATE II HISAR 125 005 HARYANA | HISAR | HARYANA | 125005 | L4 | Rejected-AOC ACCEPTED |
Tender Value
₹38 L
EMD Value
₹76,000
Closing Date
12 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Vikram Singh
GE (Utility) Chandimandir
GE(U)/CHM-05/2022-23 CERTAIN MISC B/R AND E/M REPAIR WORKS FOR SCIC WD MED STORE GYNE OPD ENT/EYE OPD FAM OPD ETC AT GROUND FLOOR OF COMD HOSP UNDER GE (U) CHANDIMANDIR
2022_MES_524558_2
GE(U)/CHM-05/2022-23
Open Tender
Miscellaneous Works
Item Rate
180 days
GE (Utility) Chandimandir
Please refer as per tender documents
7 documents required · 7 mandatory
₹500
GE (Utility) Chandimandir
₹76,000
Yes
12 May 2023
20 Aug 2022
15 Sept 2022
20 Aug 2022
12 Sept 2022
29 Aug 2022
Amount
M&L Brick work with sub class 'B' old size burnt bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 all as specified and directed by Engineer - in - Charge .
Cutting chases, pinning in brick walls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels, etc; and cuttings chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exceeding 10 cm girth all as specified and directed by Engineer-in - Charge.
M & L Marble work of baroda green 18 to 20mm (table rubbed and polished) in steps, jambs, pillars, window cills, shelves, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over and including 15mm thick cement screed 1:4 all as specified and directed by Engineer - in - Charge .
S & F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.24 (a) ; supplied and fitted to chowkats all as specified and directed by Engineer - in - Charge .
Taking down chowkhats or frames with shutters (with out taking off shutters from the frame) not exceeding 1.50 Sqm each all as specified and directed by Engineer - in – Charge.
Taking down chowkhats or frames with shutters without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm each and all as specified and directed by Engineer - in - Charge.
Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.0 Sqm each all as specified and directed by Engineer - in - Charge .
Taking down shutters of any description exceeding 2.0 Sqm each all as specified and directed by Engineer - in - Charge .
Resecuring or easing & adjusting without taking down of shutters of any description exc 1.00 sqm but not exc 2.0 Sqm each complete all as specified and directed by Engineer - in - Charge.
S & F Solid PVC door frame factory made of size 50mmx 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube jointed , supplying and fixing in opening complete all as specified and as directed by Engineer-in-Charge.
Factory made solid panel PVC Moulded Door Shutter, 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed by Engineer-in-Charge.
S&F 17/18mm thick PVC soild board prelaminated both sides as in cub boards, shelves, drawers and the like duly fitted as per specifications and directed by Engineer-in-Charge.
S & F Aluminium anodised barrel tower bolt of extruded section 150mm long all as specified and directed by Engineer - in - Charge .
S & F in repairs aluminium anodised barrel tower bolt of extruded section 150mm long all as specified and directed by Engineer - in - Charge .
S & F aluminium alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast or extruded section and fixing bolts of extruded section or cast aluminium alloy 300mm size all as specified and directed by Engineer - in – Charge .
S & F in repairs aluminium alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast or extruded section and fixing bolts of extruded section or cast aluminium alloy 300mm size all as specified and directed by Engineer - in – Charge .
S & F MS butt hinges, medium weight cold rolled 100mm size all as specified and directed by Engineer - in - Charge .
S & F in repairs continuous (Piano) hinge 30mm width of flaps mild steel bright finished or electrogalvanised complete all as specified and as directed by Engineer-in-Charge.
S & F mild steel, 300mm, ordinary rat rail rod pattern spring including roller and roller plate complete all as specified and directed by Engineer - in - Charge.
S & F extruded aluminium alloy handles fabricated type, anodised 150mm size all as specified and directed by Engineer - in - Charge .
S & F in repairs extruded aluminium alloy handles fabricated type, anodised 150mm size all as specified and directed by Engineer - in - Charge .
S & F in repairs bright finished brass 100 mm mortice lock with four levers vertical type with necessary screws etc complete all as specified and directed by Engineer - in - Charge.
S & F in repairs hasp and staple safety type of brass with mild steel hinge pin including bolt to hinge plate and fixed with screws 150mm size all as specified and directed by Engineer - in - Charge.
S & F in repairs drapery curtain rods fancy type 20mm dia mild steel, powder coated with brackets, knobs, end stops etc all as specified and directed by Engineer - in - Charge .
S & F in repairs curtain rods 20mm dia of anodised aluminium alloy with fixing brackets, stop rollers etc. all as specified and directed by Engineer - in - Charge.
S & F in repairs brass chromium plated tubular towel rail 20mm dia “D” type 60 cm long between flanges incldg brackets complete all as specified and directed by Engineer - in - Charge .
S & F in repairs floor door stopper 150mm of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor all as specified and directed by Engineer - in - Charge.
S&F in repairs door closer hydraulically regulated, aluminium (Die cast) body, designation No. 3, universal type suitable for door shutter upto 1000mm in width and of weight 61 to 80 kg complete all as specified and as directed by Engineer-in-Charge.
S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-Charge.
S & F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engineer-in-Charge.
M & L welding in repairs exc. 2.5cm but n. exc 5.0cm in length & to not exceeding 6mm thickness of matels to be welded all as specified and directed by Engineer - in - Charge.
S&F anodized aluminium frame with Powder Coating (minimum thickness of powder coating 50 micron) for doors, windows, ventilators, partitions etc., with one or more rebates including joining cleat for fixing etc complete all as specified and as directed by Engineer-in-Charge.
S&F Anodised aluminium door shutters with Powder Coating (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each leaf, hinges 3 Nos in each leaf, anodised aluminum snap beading screws etc. completed all as specified and as directed by Engineer-in-Charge.
S&F anodised aluminium window and ventilator shutters, with Powder Coating (minimum thickness of powder coating 50 micron), side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 Nos in each leaf) suitable handles (2 Nos in each leaf) complete all as specified and as directed by Engineer-in-Charge.
S&F anodised aluminium grill diamond shape 100mmx100mm aperture of 6mm dia round bars including necessary joining cleats, clips, anodised aluminium snap beading, screws, complete all as specified and as directed by Engineer-in-Charge.
S & F anodized aluminium snap grid frame work for false ceiling size of grid 605 x 605mm all as specified and directed by Engineer - in - Charge.
S & F Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete for size of grid 605 x 605mm complete all as specified and directed by Engineer-in-Charge.
M & L perforated particle board / tiles 12mm thick for insulation and acoustic purpose 60 x 60cm size fixed with screw to aluminium frame work or staples on snap grid in ceiling complete all as specified and directed by Engineer - in - Charge.
M & L pre-laminated particle board, 9mm thick interior grade, pre-laminated both sides with decorative choice laminations, fixed with screws to timber frame work complete all as specified and directed by Engineer - in - Charge.
M & L machine cut Kota stone slab flooring 20 – 25mm thick over and including cement screed base 20mm thick in cement mortar 1:3, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer - in – Charge.
All as per Srl item No. 40 here in before but for vertical surfaces over screed 10mm thick in cement mortar 1:3 all as specified and directed by Engineer - in - Charge.
M & L granite work (of any type) 18 to 20mm thick machine cut as in steps, jambs, pillars, window cills, cooking platform bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting, rubbing and polishing laid over and including bedding layer or screed 20mm thick in cement mortar 1:4 all as specified and directed by Engineer - in - Charge.
M & L 20mm thick Granite(of any type) tiles machine cut in skirting/dado laid bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting, rubbing and polishing laid over and including screed 10mm thick in cement mortar 1:3 all as specified and directed by Engineer - in - Charge.
Extra over Granite or marble slabs as in rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as directed. all as specified and directed by Engineer - in - Charge.
M & L 25 mm thick Cement Conrete 1:2:4 type B–0 using 12.5mm graded stone aggregates flooring finished even and rough to receive topping layer all as specified and directed by Engineer - in – Charge .
M & L for glazed ceramic coloured tiles 7mm thick 300 x 450mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick cement sand plaster (1:3) complete all as specified and directed by Engineer - in - Charge.
M & L for non skid ceramic coloured tiles with matt finish, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement paste pigmented to tile shade over and including 15mm thick cement and sand screed (1:4) complete all as specified and directed by Engineer - in - Charge.
All as per Srl item No. 47 here-in-before but on vertical surface such as skirting, dado over and including 10mm thick cement sand plaster (1:3) etc complete all as specified and directed by Engineer - in - Charge.
M & L vitrified ceramic light shade coloured tiles with matt finish, 10 mm thick ( square/ rectangular ) polished, area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement paste pigmented to tile shade over and including 15mm thick cement and sand screed (1:4) complete all as specified and directed by Engineer - in - Charge.
All as per Srl item No. 49 here-in-before but on vertical surface such as skirting, dado over and including 10mm thick cement sand plaster (1:3) etc complete all as specified and directed by Engineer - in - Charge.
Dismantling floor or wall tiles including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer - in – Charge.
M & L 5mm thick rendering in Cement Mortar 1:3 on fair faces of brick work or concrete surfaces of ceiling finished even and smooth without using extra cement complete all as specified and directed by Engineer - in - Charge .
M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge .
M & L rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge .
Taking down cement plaster/ terrazo finish on brick wall including racking out joints, hacking for keys scrubbing down with water all as specified and directed by Engineer - in - Charge.
M & L one coat of white wash on old decorated plastered or unplastered surfaces of walls including preparation of surfaces complete all as specified and directed by Engineer - in - Charge .
M & L one coat of white wash on old decorated plastered or unplastered surfaces of ceiling including preparation of surfaces complete all as specified and directed by Engineer - in - Charge .
M & L three coats of white wash including preparing new plastered or unplastered surfaces of ceiling complete all as specified and directed by Engineer - in - Charge.
M & L one coat of distemper oil emulsion on old decorated plastered surfaces of walls including preparation of surfaces by washing, rubbing down and stopping of distempered surfaces complete all as specified and directed by Engineer - in - Charge .
M & L two coats of distemper oil emulsion on old decorated plastered surfaces of walls including preparation of surfaces by washing, rubbing down and stopping of distempered surfaces complete all as specified and directed by Engineer - in - Charge .
M & L two coats of distemper oil emulsion over a coat of wall putty (Asian / JK / Birla), preparatory to distempering, on newly plastered surfaces of walls including preparation of surfaces all as specified and directed by Engineer - in - Charge.
M & L two coats of distemper oil emulsion over a coat of wall putty (Asian / JK / Birla), preparatory to distempering on old surfaces after complete removal of existing treatment all as specified and directed by Engineer - in - Charge.
M&L plastic emulsion paint one coat including preparation of old decorated plastered or unplastered surfaces of walls or concrete surfaces complete all as specified and as directed by Engineer-in-Charge.
S & F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50 sqm in each pane all as specified and directed by Engineer - in - Charge .
S & F 3mm thick sheet glass frosted on one side ordinary quality and glazing with oil putty in square not exceeding 0.50 sqm in each pane all as specified and directed by Engineer - in - Charge .
S & F 5.5mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50 sqm in each pane all as specified and directed by Engineer - in - Charge .
S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square exceeding 0.50 sqm in each pane all as specified and directed by Engineer - in - Charge .
S & F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed by Engineer - in - Charge .
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by Engineer - in - Charge .
M & L for preparation of old painted wooden surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and directed by Engineer - in - Charge .
M & L providing two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces including preparation of surface of any description over 10 cm width or girth all as specified and directed by Engineer - in - Charge .
M & L providing two coats of varnishing over a coat of filler on old wooden surfaces including preparation of surface of any description over 10 cm width or girth all as specified and directed by Engineer - in - Charge .
M & L two coats of distemper oil emulsion over a coat of wall putty (Asian / JK / Birla), preparatory to distempering, on newly plastered surfaces of walls including preparation of surfaces all as specified and directed by Engineer - in - Charge.
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over plastered or unplastered or concrete surfaces including preparation of new surfaces complete all as specified and as directed by Engineer-in-Charge.
M & L providing two coats of varnishing over a coat of filler on old wooden surfaces including preparation of surface of any description over 10 cm width or girth all as specified and directed by Engineer - in - Charge .
M & L for preparation of old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and directed by Engineer - in - Charge .
S & F 15mm bore medium grade steel tubes galvanised with all fittings and fixed complete to walls & ceiling or laid in floor all as specified and directed by Engineer - in – Charge .
S & F 20mm bore medium grade steel tubes galvanised with all fittings and fixed complete to walls & ceiling or laid in floor all as specified and directed by Engineer - in – Charge .
Taking down steel tubing 15mm bore and connections including cleaning for refixing/ removal complete all as specified and directed by Engineer - in – Charge.
Taking down steel tubing 20mm bore and connections including cleaning for refixing/ removal complete all as specified and directed by Engineer - in – Charge.
S & F in repairs Concussive push button taps of cast copper alloy screwed for iron pipe and fixed 15mm bore all as specified and directed by Engineer - in - Charge .
S&F in repair bib taps 15mm bore dia, fancy type, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe all as specified and directed by Engineer – in – Charge .
S&F in repairs elbow operated bib taps for surgeons 15mm bore dia, fancy type, cast copper alloy chromium plated , screwed down, screwed for iron pipe all as specified and directed by Engineer – in – Charge .
S&F in repairs Pillar taps 15mm bore dia, fancy type, cast copper alloy with capstan heads chromium plated screwed down hidh pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed all as specified and directed by Engineer – in – Charge .
S&F in repairs 15mm bore central hole basin mixer chromium plated brass for mixing hot & cold water screwed down for iron pipe and fixed as specified and directed by Engineer – in – Charge .
S&F in repairs elbow operated 15mm bore sink mixer, fancy type chromium plated brass, screwed down for iron pipe and fixed as specified and directed by Engineer – in – Charge .
S & F in repairs 15mm bore stop valve, cast copper alloy screwed down, fancy type, chromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified and directed by Engineer - in – Charge.
S & F in repairs 15mm bore stop valve, fancy type, chromium plated cast copper alloy screwed down, high pressure, with long shank and cup (concealed type) with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified and directed by Engineer - in – Charge.
S & F in repairs push tap 15mm bore any colour high pressure of PTMT screwed for iron pipe and fixed .(Minimum weight 47gms) all as specified and directed by Engineer - in - Charge .
S & F in repair bib tap, fancy type 15mm bore standard of PTMT any colour high pressure screwed for iron pipe and fixed .(Minimum weight 90gms) all as specified and directed by Engineer - in - Charge .
S & F in repairs Stop valve 15mm bore of PTMT any colour with long shank and cup(concealed type) screwed for iron pipe and fixed (Minimum weight 110 gms) all as specified and directed by Engineer - in - Charge .
S & F grating round 125mm with waste hole of PTMT (minimum weight 40 gms) all as specified and directed by Engineer - in - Charge.
S & F in repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) all as specified an directed by Engineer - in - Charge .
S & F in repair PVC connection 15mm size with PTMT nuts of length 450mm all as specified and directed by Engineer - in – Charge.
S & F PVC pipes (SWR) single socketed with rubber ring joints 110mm dia laid in trenches or in floors complete all as specified and directed by Engineer - in - Charge .
S&F PVC ( SWR) bends any radius bore of 110 mm all as specified and directed by Engineer - in - Charge
M & L Brass chromium plated bottle trap 32mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed all as specified and directed by Engineer - in - Charge .
M & L cast iron floor trap 75mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B–1 in repairs all as specified and directed by Engineer - in - Charge .
S & F in repairs vitreous china wash down water closet pan (Pedestal Pattern), white including plastic water closet seat cover, black, closed pattern with flat bottom with mild steel chromium plated or aluminised hinging device and fixing with all joints to WC pan all as specified and directed by Engineer - in - Charge .
S & F in repairs vitreous china squatting pan Orrisa pattern size 580mm x 440mm white with integral foot rest with CI ‘P’ or ‘S’ trap and fixing in lime concrete (1 lime: 2 sand : 5 aggregate), 150mm thick all round and finished just below level of rim of pan to receive the floor finishing including connection to flushing cistern and flush pipe to WC pan all as specified and directed by Engineer - in - Charge .
S & F in repairs PVC 10 ltrs syphonic action type flushing cistern, low level with inlet, ball valve and float including brackets, flush pipe of PVC 32mm bore and connection to WC pan complete all as specified and directed by Engineer - in - Charge .
S & F in repairs vitreous china wash basin, white, flat back, size 550x400mm including waste fitting brass chromium plated and fixing with new brackets including cutting and pinning in ends of brackets complete all as specified and directed by Engineer - in – Charge .
S & F in repairs brass chromium plated shower rose 125mm size with or without swivel joint any size including fixing to steel pipe or union all as specified and directed by Engineer - in - Charge.
S & F in repairs stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen with plug, washers, waste fittings, waste pipe, cast iron cantilever brackets, over all size 915mm x 460mm with bowl size 410mm x 330mm x 160mm with waste pipe PVC 40mm dia all as specified and directed by Engineer-in-Charge.
S & F toilet paper holder, brass chromium plated fixed to wall with chromium plated brass screws complete all as specified and as directed by Engineer-in-Charge.
S & F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device all as specified and as directed by Engineer-in-Charge.
S & F soap dish brass chromium plated, fixed to plugs with brass chromium plated screws complete all as specified and directed by Engineer - in - Charge.
S & F health faucet with tube & wall hook chromium plated brass fixed to 15mm size pipe. Make : Jaquar Cat No. ALD-BLK-583 or equivalent make as specified.
Demolition of brick work built in cement mortar all as specified and directed by Engineer - in - Charge.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc.all as specified and directed by Engineer - in - Charge .
Dismantling boarding, any description, fixed in any position with screws all as specified and directed by Engineer - in - Charge.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets all as specified and directed by Engineer - in - Charge.
Taking down PVC soil waste and vent pipes, any type, and taking out 100/75mm bore all as specified and directed by Engineer - in - Charge .
Taking down aluminium / Copper point wiring (light, fan, socket or power, bell complete fittings such as sockets, ceiling roses, pendants, battens/ conduits (as required), holders, regulators and making good the disturbed surfaces of walls, floors, ceiling etc all as specified and directed by Engineer - in - Charge.
M & L point wiring complete with 1.5 Sqmm single core multi stranded copper conductor of 1100 volts grade PVC FRLS insulated and sheathed cable drawn through in and including PVC casing and capping double locked box type with accessories fixed on surface of walls / ceiling by means of PVC sleeves/dash thru fasteners with cadmium plated screws all as per IS including sunk type MS pressed steel terminal box for mounting fittings like switches, sockets, fan regulators etc with 3mm thick plastic laminated sheet top cover etc including 1.5 Sqmm single core stranded / solid copper conductor 1100 volts grade PVC insulated and sheathed cable as earth continuity conductor to common earth and connecting to earth dolly for One light/bell point/fan point controlled by one, one way switch all as specified and directed at site by Engineer – in – charge.
All as per Srl item No. 116 here-in-before but with 2.5 Sqmm single core multi stranded copper conductor of 1100 volts grade PVC FRLS insulated and sheathed cable for one multipurpose switch socket outlet 6 pin 5/6 Amps and 6/16 Amps on independent board including 2.5 Sqmm single core stranded / solid copper conductor 1100volts grade PVC insulated and sheathed cable as earth continuity conductor to common earth and connecting to earth dolly.
M & L point wiring complete with 1.5 Sqmm single core multi stranded copper conductor of 1100 volts grade PVC FRLS insulated and sheathed cable drawn through in existing conduit including 1.5 Sqmm single core stranded / solid copper conductor 1100 volts grade PVC insulated and sheathed cable as earth continuity conductor to common earth and connecting to earth dolly with copper lugs inserted in existing MS boxes for One light/bell point/fan point controlled by one, one way switch all as specified and directed at site by Engineer – in – charge.
All as per item No. 118 here in before but for socket out let 3 pin 5 amp on same board all as specified and directed by Engineer - in - Charge
All as per item No. 118 here in before but for socket out let 3 pin 5 amp on independent board all as specified and directed by Engineer - in - Charge.
All as per item No. 118 here in before but for One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size all as specified and directed by Engineer - in - Charge
All as per Srl item No. 118 here-in-before but with 2.5 Sqmm single core multi stranded copper conductor of 1100 volts grade PVC FRLS insulated and sheathed cable for one multipurpose switch socket outlet 6 pin 5/6 Amps and 6/16 Amps on independent board including 2.5 Sqmm single core solid copper conductor 1100volts grade PVC insulated and sheathed cable as earth continuity conductor to common earth and connecting to earth dolly.
All as per Srl item No. 118 here-in-before but with 4 Sqmm single core multi stranded copper conductor of 1100 volts grade PVC FRLS insulated and sheathed cable for one multipurpose switch socket outlet 6 pin 5/6 Amps and 6/16 Amps on independent board including 4 Sqmm single core stranded / solid copper conductor 1100volts grade PVC insulated and sheathed cable as earth continuity conductor to common earth and connecting to earth dolly.
S & F Modular switch 1 way 6A, 1 module, one way all as specified and directed by Engineer - in – Charge.
S & F Modular switch 1 way 16A, 1 module, one way all as specified and directed by Engineer - in – Charge.
S & F Modular Bell push 6A, 1 module, single pole one way, all as specified and directed by Engineer - in – Charge .
S&F electric call bell/ buzzer, AC, 230 volts, single pole, complete all as specified and as directed by Engineer-in-Charge.
S&F modular socket, 6A - 2/3 pin combined 2 module all as specified and directed by Engineer-in –Charge.
S&F modular socket 6A/16A - 2/3 pin combined 2 module all as specified and directed by Engineer-in –Charge.
S&F modular fan step regulator, 120W - 2 module all as specified and directed by Engineer-in –Charge.
S&F modular White cover plate with frame, 1 module all as specified and directed by Engineer-in –Charge.
S&F modular White cover plate with frame, 2 module all as specified and directed by Engineer-in –Charge.
S&F modular White cover plate with frame, 3 module all as specified and directed by Engineer-in –Charge.
S&F modular White cover plate with frame, 4 module all as specified and directed by Engineer-in –Charge.
S&F modular White cover plate with frame, 6 module all as specified and directed by Engineer-in –Charge.
S&F modular White cover plate with frame, 8 module all as specified and directed by Engineer-in –Charge.
S & F MCB distribution board of sheet metal single pole and neutral 12 way, double door, with 200 Amp rated bus bar 240 volt all as specified and directed by Engineer-in- Charge.
S & F MCB distribution board of sheet metal single pole and neutral 8 way, double door, with 200 Amp rated bus bar 240 volt all as specified and directed by Engineer-in- Charge.
S & F MCB distribution board of sheet metal single pole and neutral 4 way, double door, with 200 Amp rated bus bar 240 volt all as specified and directed by Engineer-in- Charge.
S & F MCB, Single pole & neutral, 240 Volt, 63 Amps, braking capacity 10 KA all as specified and directed by Engineer - in - Charge.
S & F MCB single pole & neutral 40 Amp 240 volt with rupturing capacity not less than 10 KA all as specified and directed by Engineer – in – Charge.
S & F MCB single pole & neutral 6 to 32 Amp 240 volt with rupturing capacity not less than 10 KA all as specified and directed by Engineer – in – Charge .
S & F MCB triple pole & neutral 63 Amp 440 volt, 16KA , IP-43 all as specified and directed by Engineer – in – Charge .
Supply and fixing single pole and neutral enclosures with two pin and earth plug and socket complete with one single pole MCB 240 V 20 Amps all as specified and directed by Engineer - in - Charge.
S&F MCCB, (AC 415 V), adjustable thermal (70%-100%) & fixed magnetic setting, three pole, 63 Amps, breaking capacity 36 KA complete all as specified and as directed by Engineer-in-Charge.
S&F MCCB, (AC 415 V), adjustable thermal (70%-100%) & fixed magnetic setting, three pole, 100 Amps, breaking capacity 36 KA complete all as specified and as directed by Engineer-in-Charge.
S&F MCCB, (AC 415 V), adjustable thermal (70%-100%) & fixed magnetic setting, three pole, 125 Amps, breaking capacity 36 KA complete all as specified and as directed by Engineer-in-Charge.
S&F MCCB, (AC 415 V), adjustable thermal (70%-100%) & fixed magnetic setting, three pole, 160 Amps, breaking capacity 16 KA complete all as specified and as directed by Engineer-in-Charge.
S&F MCCB, (AC 415 V), adjustable thermal (70%-100%) & fixed agnetic setting, three pole, 200 Amps, breaking capacity 25 KA complete all as specified and as directed by Engineer-in-Charge.
S&F MCCB, (AC 415 V), adjustable thermal (70%-100%) & fixed agnetic setting, three pole, 250 Amps, breaking capacity 25 KA complete all as specified and as directed by Engineer-in-Charge.
S & F PVC blanking plate for filling empty space in terminal boxes/ DBs complete all as specified and as directed by Engineer-in-Charge.
S & F ceiling rose 65 x 50mm three terminals PVC/ polycorbonate, isolated body all as specified and directed by Engineer - in - Charge .
S & F in repairs submain wiring with two single core cables PVC FRLS insulated unsheathed 4 Sqmm stranded copper conductor drawn in and including PVC conduit with and including PVC insulated 4 Sqmm stranded copper conductor cable as earth continuity conductor and connecting complete all as specified and directed by Engineer - in - Charge. Note : PVC cables two single core and one single core of sizes as mentioned will considered as one unit.
S & F in repairs submain wiring with two single core cables PVC FRLS insulated unsheathed 6 Sqmm stranded copper conductor drawn in and including PVC conduit with and including PVC insulated 6.0 Sqmm stranded copper conductor cable as earth continuity conductor and connecting complete all as specified and directed by Engineer - in - Charge. Note : PVC cables two single core and one single core of sizes as mentioned will considered as one unit.
S & F in repairs submain wiring with two single core cables PVC FRLS insulated unsheathed 10 Sqmm stranded copper conductor drawn in and including PVC conduit with and including PVC insulated 10 Sqmm stranded copper conductor cable as earth continuity conductor and connecting complete all as specified and directed by Engineer - in - Charge. Note : PVC cables two single core and one single core of sizes as mentioned will considered as one unit.
S & F in repairs submain wiring with four single core cables PVC FRLS insulated unsheathed 10 Sqmm stranded copper conductor drawn in and including PVC conduit with and including PVC FRLS insulated one single core cables 10 Sqmm stranded copper conductor cable as earth continuity conductor and connecting complete all as specified and directed by Engineer - in - Charge. Note : PVC cables four single core and one single core of sizes as mentioned will considered as one unit.
S & F in repairs submain wiring with four single core cables PVC FRLS insulated unsheathed 16 Sqmm stranded copper conductor drawn in and including PVC conduit with and including PVC FRLS insulated one single core cables 16 Sqmm stranded copper conductor cable as earth continuity conductor and connecting complete all as specified and directed by Engineer - in - Charge. Note : PVC cables four single core and one single core of sizes as mentioned will considered as one unit.
M&L self ballasted retrofit LED tubes with PC cover/ PC body 20W with high lumens 6500K (4') complete and connecting complete all as specified and directed by Engineer-in-Charge.
M&L heavy duty batten pre coated CRCA body, suitable for retrofit LED 1X18/20W LED tube and connecting complete all as specified and directed by Engineer-in-Charge.
Supply and fixing LED luminaire 600 mm x 600mm, 35/36 watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.
All as per the description of serial item No 160 but 40 watt
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and s directed.
S & F in repairs electronic driver of 36 watt,2.5 KV search protection as per existing in site suitable for LED Ceilling light 2X2, 1X 4 ft, input supply 140V -270V and output 12 Volt DC.
S&F single twin tube bulb 36 watt, 230 volts (suitable for 3x36 watt CFL light fitting) as per sample complete all as specified and as directed by Engineer-in-Charge.
chahalbuilders
M/s Krishan Aggarwal
m/s krishna engineers1
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .