REPAIR/ MAINT AND REPLACEMENT OF SUMMER AND WINTER APPLIANCES INCL CONNECTED WORKS UNDER GE (WEST) LUCKNOW

Amount

Comprehensive repair/maintenance of solar water heater system of capacity 100/200/300 LPD, vertical or horizontal type comprising of the following: (a) Opening or dismantling the solar tank, taking down, de-scaling, brushing and thoroughly cleaning. (b) checking of all stop cock, pressure release valves, fusible plugs for its serviceability etc. in situ to ensure proper functioning of parts including supply and replacing of washers/ gasket nut etc. (c) Checking and rectify earth continuity of the Electrical circuits of Solar water heater power point. (d) Checking and re-fixing thermostat and re-adjust. (e) Re-assembling the solar water heater assy and re-install at same position and testing complete all as specified and directed. NOTE: Unserviceable Parts/ components of solar water heater shall be replaced by the contractor. (ii) Supply of new parts/components shall be measured and paid separately under respective item of schedule.

Supply only heating elements of capacity 3 KW AC 240 volts suitable for storage type solar water heater as per requirement (press type/ screw type/ triangular/ circular base or ceramic cartige type), ISI marked complete all as specified and directed.

Supply and fixing heating elements of capacity 2 KW AC 240 volts suitable for storage type water heater (geyser) as per requirement (press type/ screw type/ triangular/ circular base or ceramic cartige type), siutable for 25/50 ltr geyser ISI marked complete all as specified and directed.

S&F in repair bib taps 25mm bore, half/quarter turn, fancy type, long body, cast copper alloy, chromium plated, screwed for iron pipe or for brass ferrule including all accessories complete all as specified and directed.

S&F in repair 20mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floors complete all as specified and directed.

S&F in repair 15mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floors complete all as specified and directed.

S&F in repair 250 litres capacity rotational molded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position complete all as specified in SSR Part-I and directed.

M&L in replacement thermal solar module panel with heat resistant toughend glass including copper lead used for solar water heater based on indirect transfer of heat of capacity 100 LPD by disconnecting old unserviceable solar panel complete all as specified and directed.

M&L in replacement thermal solar module panel with heat resistant toughend glass including copper lead used for solar water heater based on indirect transfer of heat of capacity 200 LPD by disconnecting old unserviceable solar panel complete all as specified and directed.

M&L in replacement thermal solar module panel with heat resistant toughend glass including copper lead used for solar water heater based on indirect transfer of heat of capacity 300 LPD by disconnecting old unserviceable solar panel complete all as specified and directed.

M&L in replacement hot water tank suitable for solar water heater based on indirect transfer of heat of capacity 100 LPD complete all as specified and directed.

M&L in replacement hot water tank suitable for solar water heater based on indirect transfer of heat of capacity 200 LPD complete all as specified and directed.

M&L in replacement hot water tank suitable for solar water heater based on indirect transfer of heat of capacity 300 LPD complete all as specified and directed.

S&F in repair MCB, single pole & neutral 32 Amp, 240 volts, 10 KA breaking capacity, 'C' curve complete all as specified and directed.

S&F 1100V grade heavy duty XLPE armoured cable, PVC insulated copper conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection of size 6sqmm, 3 core cable complete all as specified and as directed

Supply only thermostat of Type EST 11/20A, 240 Volt of ISI marked approved make complete all as specified and directed.

Supply only thermostat of Type EST 7/15A, 240 Volt of ISI marked approved make complete all as specified and directed.

M & L for brass ball float valve of size 25 mm for tank complete all as specified and as directed.

M & L in repair of mild steel channel or angle sections of any size and shape including clamps, back plate with bolts, nuts, washers drilled for insulator bolt, welding, bending cold or hot in any shape or size suitable for mounting of water tanks/solar tanks/solar panels as directed and painted with two coats of aluminium paint over a coat of red oxide primer complete incl taking down old and unsv cross arms all as specified and directed.

M & L in repair for PCC 1:2:4, type B-1, (using 20mm graded stone aggregate) as in coping including necessary use & waste of form work complete all as specified and directed.

M & L in repair for Hot water pipe duly insulated with glass wool and aluminium cladding 15 mm bore complete all as secified and as directed

M & L for cutting, opening Square/circular in shape, through brick wall of 230 mm thick built in CM required for fixing of 250 mm dia exhaust fans including making good the surrounding of opening Jambs, cills etc in PCC 1:2:4 type B-0 (using 12.5 mm grade stone agg ) complete all as specified and directed

S&F in repair BLDC ceiling fan 1200mm sweep with powder coated aluminium blades dust free min air delivery 220m3/min , poser consmption 26-28 watt, star rating (BEE) 5 star, 350 RPM with down rod as per site requirement alongwith connected accessories incl provn of connection with three core flexible copper wire cable of size 1.50sqmm from ceiling rose to fan, min 2 years procuct warranty and 05 years motor warranty complete all as specified and directed.

Supply & Fixing in repair of stationery storage type electric BEE 5 star rated Hot Water Geyser of capacity 50 Ltr to operate on 230 volt AC supply,vertical type, white in colour, working pressure min 08 Mpa with glass lined coated tank, magnesium anode, adjustable thermostat, enamel coated incology heating element 2 KW, ABS plastic body,incl 15 Amp plug top, 230 volds, 50 Hz, Product warrancy-2 years, Heating element warranty -4 years, Inner Tank warranty -7 years, including 2/4 Nos full threaded fastnar of size 100 x 10mm with nuts and 2 Nos washer complete all as specified and directed.

Supply & Fixing in repair of stationery storage type electric BEE five star rated Hot Water Geyser of capacity 25 Ltr to operate on 230 volt AC supply,vertical type, white in colour, working pressure min 08 Mpa with glass lined coated tank, magnesium anode, adjustable thermostat, enamel coated incology heating element 2 KW, ABS plastic body,incl 15 Amp plug top, 230 volds, 50 Hz, Product warrancy-2 years, Heating element warranty -4 years, Inner Tank warranty -7 years, including 2/4 Nos full threaded fastnar of size 100 x 10mm with nuts and 2 Nos washer complete all as specified and directed.

S & F in repair 600 mm long steel connection pipe hot series with both side nut with rubber washer suitable for 25 Ltr geysers all as specified and directed.

S&F in repair of exhaust fan super enamelled copper winding, single phase, 230/240 Volt heavy duty of size 230 mm sweep 1400 RPM, including suitable louvers and making connection with twisted copper flexible wire 23/0.076mm all as specified and directed. Note:- Old ceiling fan shall be deposited in AGE E/M yard for BER action.

S&F in repair of exhaust fan super enamelled copper winding, single phase, 230/240 Volt heavy duty of size 300 mm sweep 1400 RPM, including suitable louvers and making connection with twisted copper flexible wire 23/0.076mm all as specified and directed. Note:- Old ceiling fan shall be deposited in AGE E/M yard for BER action.

S&F in repair of exhaust fan super enamelled copper winding, single phase, 230/240 Volt heavy duty of size 450 mm sweep 1400 RPM, including suitable louvers and making connection with twisted copper flexible wire 23/0.076mm all as specified and directed. Note:- Old ceiling fan shall be deposited in AGE E/M yard for BER action.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

Supply and fixing switch piano, flush type 5/6 amp, single pole, one way 240 volt complete all as specified and directed.

Supply and fixing ceiling rose surface bakelite, 65X50 mm three terminals complete all as specified and directed.

Supply and fixing in repair modular type heating elements of capacity 2 KW AC 240 volts suitable for storage type water heater (geyser) as per requirement (press type/ screw type/ triangular/ circular base or ceramic cartige type), siutable for 25/50 ltr geyser ISI marked complete all as specified and directed.

Supplyand fixing in repair modular type thermostat of Type EST 11/20A, 240 Volt of ISI marked suitable for 25/50 Ltr geyser approved make as per requirement (press type/ screw type/ triangular/ circular base or ceramic cartige type),complete all as specified and directed.

S&F in replacement of plastic body exhaust fan of size 200/225mm sweep, copper winding complete all as specified and directed.

S&F in replacment of cabin fan of size 300mm sweep, opal white, 230 Volt, copper winding, isolating complete all as specified and directed.

S&F in replacment of cabin fan of size 400mm sweep, opal white, 230 Volt , copper winding, isolating complete all as specified and directed.

M/S Husna Electrical Works (BID ID -3162521)

M/s PS Associates (BID ID -3162192)

Shree Kanth Technologies (BID ID -3164460)

M/S Reliance Construction (BID ID -3170291)