Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.0 CrAccepted-AOC | ₹1.0 Cr Quoted ₹99.6 L | L1 | Accepted-AOC SUCCESSFUL TENDERER |
| 2 | L2₹1.0 Cr+₹5.2 L (5.23%)Rejected-AOC | ₹1.0 Cr+₹5.2 L (5.23%) | L2 | Rejected-AOC SECOND LOWEST TENDERER |
Tender Value
₹1.1 Cr
EMD Value
₹63,000
Closing Date
4 Jul 2023, 2:00 pmClosed
MANAGING DIRECTOR
TNCSC HEAD OFFICE
Carryout the Renovation works in TNCSC godown campuses at Kallakurichi, Sankarapuram and Ulundurpet in Kallakurichi District
2023_TCSC_332322_1
39/CED5/F36/2023
Open Tender
Civil Works
Lump-sum
180 days
KALLAKURICHI
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹63,000
16 Nov 2023
27 Jun 2023
5 Jul 2023
27 Jun 2023
4 Jul 2023
27 Jun 2023
Amount
CIVIL WORK
Carryout the Renovation works in TNCSC Godown campus at Kallakurichi in Villupuram District. Clearing scrup jungle
Dismantling AC sheet roofing without roof timbers and clearing away and carefully stacking materials useful for reuse as directed by the departmental officers.
Reinforcement Cement Concrete 1:2:4 ( one cement, two sand, four aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed. For Foundation basement
For Ground floor
Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C. works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed..
Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corugated (grey colour) of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.
Labour charges for re alignment of existing AC Corrugated sheets including fixing of ridges, cost of U or J bolts and nuts, bitumen washers, etc. complete and as directed by the Engineer in charge complete.
Servicing the existing rolling shutter of size 1.80 x 2.60m such spring tension adjustment attending leaves repair works, locking adjustment, applying grease and kerosene wahsing for easy uplifting including cost of labour for removing and refixing the rolling shutter, cost of kerosene and grease etc., complete complying with standard specification and as directed by the departmental officers.
Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centres with casurina props of 13cm dia at 75cm centre to centre with all nails coir,wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should inclusives of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., Complete For Place surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist
Fabricating and supplying and erecting the required number of trusses with structural steel members like angle iron MS plates, vertical stanction for all truss members including cleats to receive the purlines all cutting drilling holes welding and fixing of members with necessary bolts nuts anchor bolt of approved quality hoisitn aligning and glazing the trusses inposition as per plan. The rate should include the cost painting the members with one coat of red oxide primer and zinc chromate etc., complete complying with standard specification and an directed by the departmental officers.
Supplying and laying of profiled colour galvalume sheet with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m abd long hexagonal head screws with EPDM rubber seal etc., complete complying with standard specification and as directed by the departmental officer. (Test certificate for quality should be furnished on receipt of material at site)
Supply and fixing of 40x6mm G.I flat over the Galvalume sheet roofing which is placed on the top of purlin in the longitudinal direction to avoid the lifting of roofing due to wind, the rate inclusive of necessary G.I screw, Rubber, Aluminum washer with necessary adhesive flashing tap fixed directly over the galvalume sheet, labour charges for fixing, conveyance loading, unloading and cutting, etc. complete
PLASTERING with cement mortor 1:5 (one cement and five M sand) 12 mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.
Renewing the broken AIW, Ventilator / window glass panes of 4mm thick with new glass panes of 4mm thick of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers.
Painting the existing walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.
White washing Two coat with best shell lime including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.
Painting old iron work such as steel doors, windows, ventilators, winow bars, balustrades etc. with two coats of synthetic enamel paint and approved quality and colour coat in all floors. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works).
Supplying and filling in basement with wetmix 250mm thick in layers of not exceeding 250mm thick, well watered, rammed and consolidated including machineries for hire and running charges leader 5 Cum capacity, hire charges for tipper, water sprinkler,` vibratory roller all labour charges etc., complete complying with standard specification and as directed.
Carryout the Renovation works in TNCSC Godown campus at Ullunturpet Taluk in Kallakurichi District. Clearing scrup jungle
Supplying and filling in basement with wetmix 250mm thick in layers of not exceeding 250mm thick, well watered, rammed and consolidated including machineries for hire and running charges leader 5 Cum capacity, hire charges for tipper, water sprinkler,` vibratory roller all labour charges etc., complete complying with standard specification and as directed.
Providing and laying WBM Road 75mm compacted thickness with grade II metal using 1.00 cum of 53-22.4 mm IRC size metal with 0.24 cum of gravel for blindage per 10sq.m including cost and conveyance of all materials and stacking them at the site to departmental gauge for premeasurement including including labour charges for spreading metal and gravel hand packing to chamber watering with all leads for water and compaction by 80-100 kn power roller water sprinkler and all other tools and plants employed barricading etc., complete as per clause 404 0f most specification. (Top layer)
Providing and laying WBM Road 75mm compacted thickness with grade III metal using 1.00 cum of 63-45 mm IRC size metal with 0.24 cum of gravel for blindage per 10 sq.m including cost and conveyance of all materials and stacking them at the site to departmental gauge for premeasurement including labour charges for spreading metal and gravel hand packing to chamber watering with all leads for water and compaction by 80-100 kn power roller water sprinkler and all other tools and plants employed barricading etc., complete as per clause 404 0f most specification. (Top layer)
Carryout the Renovation works in TNCSC Godown campus at Sankarapuram Taluk in Kallakurichi District. Clearing scrup jungle
Dismantling AC sheet roofing without roof timbers and clearing away and carefully stacking materials useful for reuse as directed by the departmental officers.
CEMENT CONCRETE 1:5:10(one cement , five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed.
Reinforcement Cement Concrete 1:2:4 ( one cement, two sand, four aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed. Foundation and basement
In ground floor
Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C. works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed..
Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corugated (grey colour) of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.
Labour charges for re alignment of existing AC Corrugated sheets including fixing of ridges, cost of U or J bolts and nuts, bitumen washers, etc. complete and as directed by the Engineer in charge complete.
Servicing the existing rolling shutter of size 1.80 x 2.60m such spring tension adjustment attending leaves repair works, locking adjustment, applying grease and kerosene wahsing for easy uplifting including cost of labour for removing and refixing the rolling shutter, cost of kerosene and grease etc., complete complying with standard specification and as directed by the departmental officers.
Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centres with casurina props of 13cm dia at 75cm centre to centre with all nails coir,wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should inclusives of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., Complete For Place surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist
Fabricating and supplying and erecting the required number of trusses with structural steel members like angle iron MS plates, vertical stanction for all truss members including cleats to receive the purlines all cutting drilling holes welding and fixing of members with necessary bolts nuts anchor bolt of approved quality hoisitn aligning and glazing the trusses inposition as per plan. The rate should include the cost painting the members with one coat of red oxide primer and zinc chromate etc., complete complying with standard specification and an directed by the departmental officers.
Supplying and laying of profiled colour galvalume sheet with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m abd long hexagonal head screws with EPDM rubber seal etc., complete complying with standard specification and as directed by the departmental officer. (Test certificate for quality should be furnished on receipt of material at site)
Supply and fixing of 40x6mm G.I flat over the Galvalume sheet roofing which is placed on the top of purlin in the longitutinol direction to avoid the lifting of roofing due to wind, the rate inclusive of neccesary G.I screw, Rubber, Aluminium whaser with necessary adhesive flashing tap fixed directly over the galvalume sheet, labour charges for fixing, conveyance loading, unloading and cutting, etc. complete for 42m length.
PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.
Renewing the broken AIW, Ventilator / window glass panes of 4mm thick with new glass panes of 4mm thick of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers.
Painting two coats of old plastered walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.
White washing two coats with best shell lime in all floors including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.
Painting old iron work such as steel doors, windows, ventilators, window bars, balustrades etc. with two coats of synthetic enamel paint and approved quality and colour coat in all floors. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works).
Supplying and filling in basement with wetmix 250mm thick in layers of not exceeding 250mm thick, well watered, rammed and consolidated including machineries for hire and running charges leader 5 Cum capacity, hire charges for tipper, water sprinkler,` vibratory roller all labour charges etc., complete complying with standard specification and as directed.
G SIVAKUMAR
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .