Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.6 LAccepted-AOC 0 GANGARAM DHARMKANTA TRUCK UNION JIROTA KALAN DAUSA DAUSA RAJASTHAN 303303 | DAUSA | RAJASTHAN | 303303 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹44.0 L+₹51,136.35 (1.18%)Rejected-Finance | L2 | Rejected-Finance Being higher bid value | |
| 3 | L3₹44.2 L+₹73,416.50 (1.69%)Rejected-Finance 51 1 FULBAGAN ROAD BAGHAJATIN KOLKATA 700086 WEST BENGAL | KOLKATA | WEST BENGAL | 700086 | L3 | Rejected-Finance Being higher bid value | |
| 4 | L4₹45.6 L+₹2.1 L (4.90%)Rejected-Finance GC ROAD ABDUL LATIF ROAD PO TITAGARH KOLKATA 700119 | 24 PARAGANAS NORTH | WEST BENGAL | 700119 | L4 | Rejected-Finance Being higher bid value | |
| 5 | L5₹45.8 L+₹2.3 L (5.21%)Rejected-Finance 10 1 GROUND FLOOR WEST GHOSH PARA JAGATDAL JAGATDAL JAGATDAL NORTH 24 PARGANAS WEST BENGAL 743125 | 24 PARAGANAS NORTH | WEST BENGAL | 743125 | L5 | Rejected-Finance Being higher bid value |
Tender Value
₹42 L
EMD Value
₹84,000
Closing Date
24 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ALIPORE KOLKATA
NO 1 NATIONAL LIBRARY AVENUE, ALIPORE, KOLKATA 700027
WELCOME MAINT INTERNAL ELECTRIFICATION INCLUDING FITTINGS FIXTURES, DBS LIGHT FITTINGS AT GRAND VIEW AND GOKHALE ROAD AND REPAIR TO AC/CGI ROOF SHEETS FLOORINGS, STAIR CASES PLASTERING AND OTHER CONNECTED B/R WORKS AT HQ ZRO, GOKHALE ROAD AND MD/OTM
2023_MES_600672_1
GE/ALP(8224B) KOLKATA 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE ALIPORE KOLKATA
Class D and Category a(i)
9 documents required · 9 mandatory
₹500
GE ALIPORE KOLKATA
₹84,000
Yes
GE ALIPORE KOLKATA
19 Sept 2023
3 Jun 2023
1 Jul 2023
3 Jun 2023
24 Jun 2023
17 Jun 2023
3 Jun 2023 - 10 Jun 2023
12 Jun 2023
Amount
Material and labour for preparation of old treated surfaces of wall by brooming down or steel wire brushing and applying one coat of white washing on wall surface etc complete all as specified and directed.
All as per item No 1 here-in-before but on ceiling.
Material and labour for preparation of old plastered surfaces and applying two coats of white wash on walls complete all as specified and as directed.
All as per item No-3 above here-in-before but on ceiling.
Material and labour for preparation of old plastered surfaces and applying one coat of acrylic washable distemper on walls complete all as specified and directed.
Material and labour for preparation of old plastered surfaces wall and applying two coats of acrylic washable distemper in wall complete all as specified and directed.
M&L for complete removal of existing treatment, preparatory to distempering, priming plastered and other surfaces with chalk whiting and applying two coats of OBD on wall all as specificed and directed.
All as per item No 7 above item but on ceiling surfaces .
S & F for 2mm thick wall care putty on wall/ceiling complete all as specified and directed .
M&L for preparation of old treated/decorative surfaces of wall by washing, rubbing down and stopping old painted surface and applying one coat of cement base paint etc all as specificed and directed.
M&L for preparation of old treated/decorative surfaces of wall by washing, rubbing down and stopping old painted surface and applying two coats of cement base paint etc all as specified and directed.
M&L for preparation of old painted surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
All as per item No12 above but two coats of synthetic enamel paint .
M&L for preparation of old painted surfaces of steel & iron of any description over 10cm width or girth and applying one coat of synthetic enamel paint etc all as specified and directed.
Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint on steel surface complete all as specified and as directed.
Material and labour for preparation of old painted surfaces on walls of any description over 10 cm width or girth and applying one coat of synthetic enamel paint on wall surface complete all as specified and directed.
M&L for french polishing on surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two coats all as specified and directed.
M&L for complete removal of existing treatment of wall surfaces and applying multi colour texture with plastic paint to match existing design and pattern as approved by GE (upto 12 storied of bldg) complete all as specified and directed.
M&L for one coat of plastic paint over old texture surface to match existing design and pattern as approved by GE (upto 12 storied of bldg) complete all as specified and directed.
Taking down cement plaster of any discription on brick/stone wall including racking out joints, hacking for key scrubbing down with water, remove dust, debries/rubbish etc removing of rubbish out side MOD land/area complete all as specified and directed.
M&L for rendering 10 mm thick in CM (1:6) on brick/concrete sufaces, plastered surface finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for 10mm thick rendering in cement mortar (1:3) on concrete surface as in ceiling and finished the surface even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick in CM (1:4) on brick/concrete sufaces,finished the surface even and smooth without using extra cement including complete all as specified and directed.
M&L for preparation of newly plaster surfaces of wall and applying two coats of acrylic washable distemper over a coat of primer complete all as specified and directed.
M&L for preparation of new plaster surface of walls and applying two coats of cement base paint etc over chalk whiting all as specified and directed.
M&L for preparation of newly plaster surfaces of ceiling surface and applying three coats white wash on walls complete all as specified and directed.
M&L for preparation of old plastered surfaces of wall and applying one coat exterior acrylic emulsion paint on external surface including nescessary scaffolding complete all as specified and directed.
M&L for preparation of old surfaces of wall and applying two coats of exterior acrylic emulsion paint on external surface including necessary scaffolding complete all as specified and directed.
Supply only integral water proofing compound
Taking down shutters of any description exc. 1 sqm but n. exc. 2 sqm and resecuring or easing & adjusting and refixing in same opening.
Taking down shutters of any description n. exc. 1 sqm each and resecuring or easing & adjusting and refixing in same opening.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4 sqm each.
All as per item No 32 above but n.exc 1.5 sqm each.
Taking down shutters of any description n. exc. 1 sqm each and removing from site.
Taking down shutters of any description exc 1 sqm but n. exc. 2 sqm each and removing from site.
S&F for second class hard wood (SAL), plain, solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,.
S&F in repair 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type both sides (ISI marked) all with 6 mm thick teak wood edging all round.
S&F in repair 35 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a), supplied and fitted to chowkats.
S&F in repair factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, and fixing in the frame at site as per specification & drawing.
S&F in repair solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening as per specification & drawing
S&F for MS butt hinges, of size 100 mm complete all as specified and directed.
S&F for 150 mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and directed.
S&F for 100 mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and directed.
S& F for 300 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.
Supply and fix for extruded aluminium alloy handles, 150mm long fabricated type., anodised
Supply and fix for extruded aluminium alloy handles, 100 mm long fabricated type., anodised
S&F for 3 mm thick figured glass, pin head type & glazing with oil putty in square n.exc 0.5 sqm in each pane
Supply & fix for galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples.
S&F for mild steel of grade Fe-290 in bands, straps, supports or stays for rain water, ventilating pipes including bolts, if required, clamps, hold fasts and similar small articles.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones
S& F for 3 mm thick sheet glass ordinary quality & glazing with oil putty in squares n. exc. 0.5 sqm in each pane.
S & F for figured glass 4 mm thick, pin head type & glazing with oil putty in squares n. exc. 0.5 sqm in each pane
Supply & fix in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples.
Supply and fix in repairs 0.56 mm thick plain, aluminium sheeting, Alloy 31000 H4 drip and straight flashing.
Supply and fix in repairs floor door stopper of aluminium body and tongue anodised with hard drawn steel spring fixed in floor over all length of cover plate 150mm.
S&F in repairs 300 mm long aluminium allow anodised sliding door bolt with hasp staple (bolt type ) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast alu allow.
S&F in repairs 150 mm long aluminium anodised barrel tower bolt of extruded section .
M & L for two coats of synthetic enamel painting to new wooden surfaces (frame & shutter) over a coat of primer including preparation of wooden surface of any description, not otherwise descri-bed, over 10cm width or girth complete all as specified and directed.
S&F for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded
All as per item No 59 above but without glazing bars
S & F for steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.
M & L for two coats of synthetic enamel painting to new steel surfaces (frame & shutter) over a coat of red oxide primer including preparation of steel surface of any description, not otherwise descri-bed, over 10cm width or girth
Repairing and welding to steel windows including making functional (easy to opening and closing) and replacing the missing damaged parts complete all as specified and directed. (Note : Spare parts required for measured and paid separately under respective items as supply only)
Repairing and welding to steel box/projection type hinges to steel door/windows shutter, includign making functional (easy to opening and closing) and cutting existing projected hinges etc missing/damaged parts complete all as specified and directed.
Repairing and welding to steel door includign making functional (easy to opening and closing) and replacing the missing damaged parts complete all as specified and directed. (Note : Spare parts required for measured and paid separately under respective items as supply only).
Dismantling wrought iron or mild steel work of any description not otherwise provided for
M&L for framed work such as grills to window/ventilation, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165
S & F in repair 2nd class soft wood plain fillets, square, rectangular or triangular in section, wrought, secured with nails or brads, sectional area exc 13.00 Sqcm but n. exc 25.00 Sqcm.
S & F in repair 2nd class soft wood plain fillets, square, rectangular or triangular in section, wrought, secured with nails or brads, sectional area exc 3.00 Sqcm but n. exc 6.00 Sqcm.
S&F in repair 18/19 mm thick prelaminated particle board,exterior grade, fixed with screws to timber frame work but prelaminated both sides with decorative choice laminations.
Supply and fix for 18 / 19 mm thick veneered particle board, fix in cupboard shelves, interior grade, solid core, medium density general purposes type with commercial face veneers type ‘BB’
S&F for hasp and staple 100mm, allumuniun anodised, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws
S&F as in repair continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps 40mm ( when open).
S&F in repair 40 mm knobs of brass, polished fixed with nut screw and washer bright finished complete all as specified and directed.
M & L for ball catcher with 8 mm dia steel ball and brass body and skirting plate including leting in and fixed complete all as specified and directed.
S&F in repair CP curtain road 20mm dia including bracket and end knobs etc complete all as specified and directed.
Demolition of PCC in ground floor and paving n. exc 15 cm (below or above ground level) including removel of debries to out side MOD land complete all as specified and directed
M&L for 75 mm thick PCC (1:4:8), type D-2 (using 40mm graded stone aggregate) as in sub base for floors complete all as specified and directed.
M&L for 25 mm thick PCC (1:2:4), type B-0 ( using 12.5 mm graded stone aggregate) as in sub base of floor complete all as specified and directed.
Dismantling of floors health or walls tiling and stone floor including cement mortar bedding (but not backing) & removing serviceable tiles to store and rubbies of the premises
M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with over and including screed bed 15 mm thick in CM (1:6) complete all as specified and directed.
M&L for coloured glazed ceramic tiles in vertical surfaces 350 x 250x7mm /450x300x7 mm thickness as per manufacture on vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick in CM (1:3) complete all as specified and directed.
Material & labour for non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.
All as per item No 83 above here-in-before but fixed on vertical surface as on skirting over and including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and directed.
Material and labour for double charged vitrified coloured tiles (Premium Quality) of size (600x600mm) x 8-9mm thick in floor, etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles over and including 15 mm thick screed bed in CM (1 : 6 ) for laying of floor finishes complete all as specified and directed.
All as per item No 85 above here-in-before but fixed on vertical surface as on skirting over and including 10mm thick cement plaster in cement mortar (1:3) complete all as specified and directed.
M&L for plain cement concrete (1:3:6), type C1 (using 20mm graded stone aggregate) as in copings, kneelers, apex stones,bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed all as specified and directed
Material and labour in repair for granite (of any type) 18 to 20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed.
M&L in repair for green marble work 18 to 20mm thick ( table rubbed and polished ) in steps, jambs, pillers, window cills,cooking platform and like in cement mortor (1:4) including pointing with white cement (1:2) using marble dust with admixture pigment to match with marble shade complete all as specified and directed.
M&L in repair for white marble work 18 to 20mm thick ( table rubbed and polished ) in steps, jambs, pillers, window cills,cooking platform and like in cement mortor (1:4) including pointing with white cement (1:2) using marble dust with admixture pigment to match with marble shade complete all as specified and directed.
Drilling holes for bolts, pipes, etc. n. exc 25mm dia in granite or trape stone (upto 10cm depth) for gas connection pipe all as directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations
Taking down eaves gutter, rain water pipes (any size and pattern) including all fitting, bends, shoes, swan neck etc including cleaning, refixing and removing to store etc complete all as per specified and directed.
S&F in repair 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as per specified and directed
S&F in repair PVC (SWR) pipes of 110 mm dia, single socketed fixed laid in floor or tranches.
S&F in repair PVC (SWR) pipes of 75 mm dia, single socket in floor or tranches
S&F in repair PVC (SWR) pipes of 110 mm dia, single socketed fixed to walls
S&F in repair PVC (SWR) pipes of 75 mm dia, single socket fixed to walls
S&F in repair PVC (SWR) junction single tee equal or unequal 110 mm dia with access door
S&F in repair PVC (SWR) junction single tee equal or unequal 75 mm dia with access door
S&F in repair PVC (SWR) bends of 110 mm dia, any radius
S&F in repair PVC (SWR) bends of 75mm dia, any radius
S&F in repair PVC (SWR) 110 mm branch piece, single (single Y) equal or unequal
S&F for 100 mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed.
S&F for 75 mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed.
S&F for 100 mm bore CI Bends (any radius),diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
S&F for 75 mm bore CI Bends (any radius),diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
S&F for 100 mm bore CI Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.
S&F for 100 mm bore CI Cast iron cowls complete all as per specified and directed.
Supply and fix in repairs health faucet with 1.5 mtr tube and hook complete all as specified and directed.
Supply and fix in repairs 15 mm dia bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed .(Minimum weight 15mm-90gms/20mm-125gms)
Supply and fix in repairs 15 mm dia pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms)
Supply and fix in repairs 15 mm dia stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm-112gms)
Supply and fix in repairs 15mm bore piller taps of cast copper with capstan head CP screwed down high pressure with or without lettered hot and cold with long screwed shank and fly nut for iron pipe and fixed
Supply and fix in repairs 15 mm dia self-closing taps, cast copper alloy, chro-mium plated, screwed for iron pipe and fixed.
Supply and fix in repairs 15 mm bore bib taps, fancy type and chromoum plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
Supply and fix in repairs Stop valves 15mm dia , cast copper alloy, screwed down, high pressure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed
S& F in repair wall mixtur brass CP tap for mixing hot and cold water including three joints to 15 mm bore pipes or union and pluging and screwing to wall complete fixed.
Supply and fix in repairs brass chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union
S&F in repairs 32mm dia PVC waste pipe for kitchen sink , WHB , Urinal etc
Supply and fix in repairs PVC connections 15 mm size with PTMT nuts of length 450mm
S&F in repairs towel rail 600 mm long of brass C.P 'D' type fixed with and including chromium plated brass screws and wooden /plastic cheats .
Supply and fix in repairs 32 / 40 mm bore Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed
Supply and fix for high density polyethylene pipes (HDPE) 40 mm dia (bore) of pressure rating 6 kgf/cm2 laid in trenches
S&F in repair viterious china (white) wash hand basin includign 15 mm pillar cock cast copper alloy CP, 15mm cast copper stop valve, 32 mm brase CP waste fitting & 15 mm PVC connection pipe 450 mm long
S&F in repairs 10 liters capacity PVC low level flushing cistern with ISI marked body, fixed in repairs complete all as spd and directed by Engr in charge.
S&F in repairs, stainless steel kitchen plate rack of size 3'x3' etc complete all as spd and directed by Engr in charge.
S&F in repairs, vitreous china wash down water closet pan, (pedestal pattern), white, with and including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete.
S&F in repairs vitreous china squatting pan , "Orissa" pattern, size 580 mm x 440 mm, white with integral foot rests, embedded and set in PCC (1:5:10) type E-2 and making good to floor including removing rubbish .
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.
Taking up or down steel tubing & connections including cleaning for relaying of pipe 15 mm bore or removing.
Taking up or down steel tubing & connections including cleaning for relaying of pipe 20 mm bore pipes.
Taking up or down steel tubing & connections including cleaning for relaying of pipe 25 mm bore pipes.
S & F for steel water tubing 15 mm bore medium grade with all fittings & fixed complete to walls & ceilings or laid on floors complete all as specified and directed.
Refixing of old steel water tubing & connecting in new or old position (wall, ceiling & floor, etc.) of bore of pipe 15 mm.
S & F for steel water tubing 20 mm bore med grade GI with all fittings & fixed complete to walls & ceilings or laid on floors complete all as specified and directed.
Refixing of old steel water tubing & connecting in new or old position (wall, ceiling & floor, etc.) of bore of pipe 20 mm.
S &F for steel water tubing 25 mm bore medium grade GI with all fittings & fixed complete to walls & ceilings or laid on floors complete all as specified and directed.
Refixing of old steel water tubing & connecting in new or old position (wall, ceiling & floor, etc.) of bore of pipe 25 mm.
supply and fix in repairs 15 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed pipe
supply and fix in repairs 20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed pipe
S&F in repairs 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 15 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed.
S&F in repairs 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 15 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed.
Supply and fix in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia out let
S&F for PVC seat cover for EWC white/black colour complete with MS hinged cromlum plated all as specified and directed .
Supply and fix in repairs 100mm size aluminium anodised hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws
Demolition of brickwork or stone/boulder masonry, built in cement mortar all as specified and directed.
M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 all as specified and directed .
M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan built in CM (1:4) all as specified and directed.
Supply and fix in repairs aluminium (extruded section body), door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60kg and fixed
S&F for powder coated aluminium sliding windows for three track with rubber gasket, stopper powder coated aluminium standard beads/glazing clips ,locking arrangement etc and aluminium frame of size 80mmX25mmX1.55mm and shutter of section 20mm X20mm X1.55mm incl ( two shutter of 4.8mm thick glass and one shutter of wiremesh 0.36 mm dia of wire and average width of aperture 1.40 mm) including with necessary all fittings complete all as per manufacturer's instructions and all as specified and as directed.
Dismantiling of asbestos cement (Corrugated,semicorrugated, etc ) sheet in roof coverings and rubbish off the premises (out of MOD land), complete all as specified and directed.
Dismantling of timber scantling 40 sq.cm and over in section, in any postion framed work completed all as specified and directed.
Dismantling of timber scantling in fillet, rails, posts, rafters, purlins, etc under 40 sq.cm in section, in any postion framed work completed all as specified and as directed by Engineer-in-Charge.
Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) of insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.
Material and labour for 4mm thick non asbestus reinforcement gypsum (GRG) ceilling tiles of size 595 x 595 mm of approved design fixed with powder coating (powder coating on web bottom only) GI grid consisting of main Tee section of size (15mm x 30mm), cross Tee section of size (15mm x 23mm), and powder coating GI wall angle of size (20mm x 20mm) suitable for mounting ceiling tiles of 595 x595 mm with 4 mm dia GI wire suspended including fabrication complete as per manufacturers instructions fixed with steel rawl plug with nut and bolts arrengement with grid size 60 x 120 cm complete all as specified and as directed. Make : Diamond Brand TM/ Dexune or equivalent.
S&F for pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall,fixed with self tapping srews all as specified and directed.
S&F for pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall for rain water pipe ,fixed with self tapping srews all as specified and directed.
S&F for MS rolled section as in roof purlins, rafters and truss etc of MS pipe fixed with iron cleats along with nuts & bolts of required size or section or welded conforming to Fe-290 Gde E-165.
Taking down carefully copper/aluminium point wiring (light,fan,socket etc.) complete including fittings such as switch, ceiling rose, light fittings, regulators etc. and making good to the disturbed surface of walls, floors etc. complete all as specified and directed.
M&L as in repair / replacement for point wiring for one light/ bell/ fan controlled by one number one way switch complete with 1100 V grade FRLSH PVC insulated multistranded copper conductor cable conforming to IS : 694 of size 1.5 Sqmm two runs single core for phase and neutral drawn through and including PVC concealed conduit pipe of suitable size minimum 20mm dia medium grade (ISI Marked ) complete with one run of 1100 V grade FRLSH PVC insulated multistranded copper conductor cable 1.5 Sq mm single core green colour for earth continuity conductor and connecting to common earth dolly including provn of MS sheet pressed sunken box not less than 1.12 mm thick concealed on wall, with 3 mm thick laminated sheet top cover (ISI marked )(Make: Hylum/Anchor/Orient) for fixing of switches/socket/regulator with screws complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing surrounding surface complete all as specified and directed. Note : Proper colour code of wiring to be maintained.
All as per item No 163 above but for 5 Amps socket on same board complete all as specified and directed.
All as per item No 163 above but for 05 A socket on independent board complete all as specified and directed.
All as per item No.163 above but for 15 A independent socket with 2.5 sqmm copper conductor complete all as specified and directed.
All as per item No. 163 above but for one light/fan/bell in PVC casing caping complete all as specified and directed.
All as per item No.163 above but for 5 Amps socket on same board in PVC casing caping complete all as specified and directed.
All as per item No. 163 above but for 5 Amps socket on independent board in PVC casing caping complete all as specified and directed.
All as per item No.163 above but for 15 A independent socket with 2.5 sqmm copper conductor in PVC casing caping complete all as specified and directed.
M&L for point wiring for one light/ bell/ fan controlled by one number one way switch for 5Amps SSC complete with 1100V grade FRLSH PVC insulated unsheathed multistranded copper conductor cable conforming to IS : 694 of size 1.5 sqmm two runs single core for phase and neutral drawn through in and including PVC concealed conduit of suitable size (minimum 20mm dia medium grade ISI Marked) complete with one run of 1100V grade FRLSH PVC insulated multistranded copper conductor cable 1.5 sq mm single core green colour for earth continuity conductor and connecting to common earth dolly including provn of modular type galvanized MS sheet pressed sunken box not less than 1.00 mm thick concealed on wall including fixing of modular cover plate of suitable modules with fixing screws, for fixing of modular type switches / socke t/ fan regulator etc. complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing surrounding surface complete all as specified and directed. Note : Proper colour code of wiring to be maintained.
All as per item No.171 above but for 5 Amps Socket on same board complete all as specified and directed.
All as per item No. 171 above but for 5 Amps socket point on independent board complete all as specified and directed.
All as per item No. 171 above but for 15 Amps socket point independent with 2.5 sqmm 1100V grade FRLSH PVC insulated copper conductor complete all as specified and directed.
All as per item No. 171 above but for one light/fan/bell in existing steel / PVC concealed conduit complete all as specified and directed.
All as per item No. 171 above but for 5 Amps Socket on same board but drawn in existing steel / PVC concealed conduit complete all as specified and directed.
All as per item No. 171 above but for 5 Amps Socket on independent board but drawn in existing steel / PVC concealed conduit complete all as specified and directed.
All as per item No. 171 above but for 15 Amps socket point with 2.5 sqmm PVC insulated copper conductor in existing steel / PVC concealed conduit complete all as specified and directed.
M&L for replacement of point wiring for one light controlled by two number two way switch complete with 1100 V grade FRLSH PVC insulated unsheathed multistranded single core copper conductor cable conforming to IS : 694 of size 1.5 Sqmm with two runs of for phase and neutral drawn through and including PVC concealed conduit pipe of suitable size minimum 20mm dia medium grade (ISI Marked ) complete with one run of 1100 V grade FRLSH PVC insulated multistranded copper conductor cable 1.5 sq mm single core green colour for earth continuity conductor and connecting to common earth dolly including provn of MS sheet pressed sunken box not less than 1.12 mm thick concealed on wall, with 3 mm thick laminated sheet top cover (ISI marked) (Make: Hylam/Anchor/Orient) for fixing of switches/socket/regulator with screws complete including making good of disturbed surfaces of wall/ceiling/floor in same specification as per existing surrounding surface complete all as specified and directed. Note : Proper colour code of wiring to be maintained.
M&L for replacement of point wiring for one light controlled by two number two way switch complete with 1100 V grade PVC insulated unsheathed multistranded single core copper conductor cable conforming to IS : 694 of size 1.5 Sqmm with two runs for phase and neutral drawn through in and including PVC casing caping of suitable size minimum 20 mm dia medium grade (ISI Marked) complete with one run of 1100 v grade PVC insulated copper conductor cable 1.5 Sq mm single core green colour for earth continuity conductor and connecting to common earth dolly including colour coding of cable shall be for phase, neutral and earth wire as specified in MES SSR Part I 1991 with provn of sunken MS sheet pressed terminal boxes made of 1.12mm thick M.S. Sheet, prepainted concealed on wall, with 3 mm thick laminated sheet top cover (ISI marked) (Make: Hylam/Anchor/Oreint) for fixing of switches/socket/regulator with screws complete all as specified and directed.
Dismantling and taking down carefully sub-main wiring any size including wooden batten etc and making good the disturbed surfaces of wall/ floor to match the existing wall/ floor etc complete all as specified & directed.
Material and labour for circuit/sub-main wiring (surface type) with two runs of 1100 V grade PVC insulated & unsheathed 2.5 Sqmm single core multi stranded copper conductor cable alongwith one run of 2.5 Sqmm 1100 V grade FRLSH PVC insulated & unsheathed single core multi stranded copper conductor cable for earth continuity conductor connected to common earth dolly, drawn through PVC casing caping complete all as specified and as directed by the Engr-in-Charge. Note : (i) Three runs of 2.5 Sqmm cable and on run PVC casin capin shall measured as one length.
Material and labour for circuit/sub-main wiring (surface type) with two runs of 1100 V grade PVC insulated & unsheathed 4.0 Sqmm single core multi stranded copper conductor cable alongwith one run of 4.0 Sqmm 1100 V grade FRLSH PVC insulated & unsheathed single core multi stranded copper conductor cable for earth continuity conductor connected to common earth dolly, drawn through PVC casing caping complete all as specified and as directed by the Engr-in-Charge. Note : (i) Three runs of 4.0 Sqmm cable and on run PVC casin capin shall measured as one length.
Material and labour for of sub-main wiring with two runs of 1100 V grade FRLSH PVC insulated & unsheathed 6.0 Sqmm single core multi stranded copper conductor cable alongwith one run of 6.0 sqmm 1100 V grade PVC insulated & unsheathed single core multi stranded copper conductor cable for earth continuity conductor connected to common earth dolly, drawn through existing concealed steel conduit or PVC conduit complete all as specified and directed. Note : (i) Three runs of 6.0 Sqmm cable shall be measured as one length.
Supply and fixing for MS box made of 1.12 mm thick MS sheet painted with synthetic enamel paint on all sides after dismantling old one including making good the disturbed surfaces complete all as specified and as directed of the following sizes :-
(a) Size 25cm x 20 cm x 6 cm
(b) Size 15cm x 10cm x 6 cm
(c) Size 10cm x 10cm x 4 cm
(d) Size 20cm x 15cm x 4 cm
S & F for ceiling rose, 3 terminal, PVC/ polycarbonate isolated body, 230 V.
S & F for piano switch flush type single pole one way 5 Amps, 230 V.
S & F for piano switch flush type single pole two way 5 Amps, 230 V.
S & F for socket flush type, 2 in 1 multipurpose, 6 Pin, 5 Amps and 15 Amps
S & F for socket flush type 2 in 1, 5 Pin, 5 Amp. .
S & F for switch piano flush type, single pole one way 15 Amps, 230 V.
S & F for call bell musical door chrome AC 230 volts single pole (Ding dong Type)
S & F for batten holder PVC / Poly carbonate with back plate suitable for 230V AC
S & F for electronic ceiling fan regulator (2 Module stepped type) flush type suitable for 230 V AC.
S & F for modular type switch, one way 6 Amps , 1 module complete Make:-Legrand/Anchor(Roma)/Crabtree
S & F for modular type socket 5 pin, 6 Amps 2 module complete .Make:-Legrand/Anchor(Roma)/Crabtree
S & F for modular type socket 5 pin, 16 Amps 2 module complete Make:-Legrand/Anchor(Roma)/Crabtree
S & F for modular type switch, one way 16 Amps, 1 module completeMake:-Legrand/Anchor(Roma)/Crabtree
S & F for modular type fan regulator step type(2 module)120 Watt.Make:-Legrand/Anchor(Roma)/Crabtree
S & F for modular type 5 Aamp bell push switch.Legrand/Havells/Crabtree/Anchor
M&L for modular cloured/white cover plate with frame 2 module including taking down of old one complete all as specified and directed.Make:-Legrand/Anchor(Roma)/Crabtree
M&L for modular cloured/white cover plate with frame 3 module including taking down of old one complete all as specified and directed.Make:-Legrand/Anchor(Roma)/Crabtree
M&L for modular cloured/white cover plate with frame 4 module including taking down of old one complete all as specified and directed.Make:-Legrand/Anchor(Roma)/Crabtree
M&L for modular coloured/white cover plate with frame 6 module including taking down of old one complete all as specified and directed.Make:-Legrand/Anchor(Roma)/Crabtree
M&L for modular white coloured/cover plate with frame 8 module including taking down of old one complete all as specified and directed.Make:-Legrand/Anchor(Roma)/Crabtree
M&L for modular white coloured/cover plate with frame 12 module including taking down of old one complete all as specified and directed.Make:-Legrand/Anchor(Roma)/Crabtree
M&L for modular white coloured/cover plate with frame 16module including taking down of old one complete all as specified and directed.Make:-Legrand/Anchor(Roma)/Crabtree
M&L for modular metal flush box 1 / 2 module including taking down of old one complete all as specified and directd. Make:-Legrand/Anchor(Roma)/Crabtree
M&L for modular metal flush box 3 module including taking down of old one complete all as specified and directd. Make:-Legrand/Anchor(Roma)/Crabtree
M&L for modular metal flush box 4 module including taking down of old one complete all as specified and directd. Make:-Legrand/Anchor(Roma)/Crabtree
M&L for modular metal flush box 6 module including taking down of old one complete all as specified and directed. Make:-Legrand/Havells/Crabtree/Anchor
S & F for modular metal flush box 8 module complete all as specified and as directed. Make:-Legrand/Anchor(Roma)/Crabtree
S & F for modular metal flush box 12 module complete all as specified and as directed. Make:-Legrand/Anchor(Roma)/Crabtree
S & F for modular metal flush box 16 module complete all as specified and as directed . Make:-Legrand/Anchor(Roma)/Crabtree
Supply and fix for 3mm thick industrial plastic laminated sheet duly cut for fixing piano type switch,socket, regulator of the following size complete all as specified and directed. (Make : Hylam/Anchor/Orient)
Supply and fixing for MCB 06 Amps to 32 Amps, single pole, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and directed . Make : ABB /Legrand/ Havells/L&T/Schineider.
Supply and fixing for MCB 40 Amps to 63 Amps, single pole, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and directed. Make : ABB /Legrand/ Havells/L&T/Schineider.
Supply and fixing for MCB 06 Amps to 32 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and directed . Make : C&S /Legrand/ Havells/L&T.
Supply and fixing for MCB 40 Amps to 63 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and directed. Make : ABB /Legrand/ Havells/L&T/Schineider.
Supply and fix as in repair SPN MCB DB 8 way with Amps rated copper bus bar, neutral link, suitable for mounting MCB's 240 volts double door type including taking down old one and making good the disturbed surface complete all as specified and directed. Make : ABB /Legrand/ Havells/L&T/Schineider.
Supply and fixing for AC power supply unit 6 module consisting in built modular motor starter, plug top, 20 Amp socket and box duly fixed/grouted on wall complete all as specified and directed . Make : North West/Havells/Crabtree/Anchor
S & F for modular type 32 A motor starters (for AC) white clour complete all as specified and directed Make crabtree/Havells/Legrand/North west/Anchor(ROMA)
S&F for LED tube light fitting 4 ft 20 watt, 230 volt energy efficient comprises of extruded PVC housing, with inbuilt driver and PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make: Magik (CAT No- BWUA020C1293)/Crompton
All as per item No 231 above but LED tube light of 2 ft and 1 x 10 Watt LED lamp complete all as specified and directed. Make : Crompton/ Havells/ Philips/ Bajaj.
S & F for LED mirror light fitting with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with inbuilt driver and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed . Make- Magik (Cat No- BWMP010C)/ Crompton (Cat No- CCS-103-10-65-SL-DP-NWH)/Havells(Cat No- LUMILINE BS10WLED865SPCWH)
PUTUL CONSTRUCTION CO.
NUPUR CONSTRUCTION
KWALITY CONSTRUCTION
RADHA ENTERPRISE
GOODWILL AND CO.
TOTCO
ARATI TRADING CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .