REPAIR / REPLACEMENT OF FLOORING, TILING, WALL PANELLING, CEILING RELATED ITEMS BLDGS OF AREA II UNDER AGE B/R (CENTRAL) UNDER GE (WEST) COLABA, MUMBAI

Amount

Anti-termite treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors all as specified and directed.

Anti-termite treatment of voids in masonry using chemical emulsion one litre per hole, at 300 mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors all as specified and directed.

Anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm center to center and sealing the same complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles including removing debris out side MD land all as specified and directed.

M&L for Brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean raddius built in CM 1:6 all as specified and directed.

Taking down cement plaster on brick/stone or concrete surfaces including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site out side MD land all as specified and directed.

M&L for Old unserviceable loose spalled concrete, chiseled from roof ceiling with the help of scrapers, chisel & hammer, cleaning of rust from mild steel rod, applying cement slurry spray 3.00 kg per sqm by paint brush over cleaned surface and thereafter rendering 20-30mm thick ready mix plaster in multi layer for ceiling on brick wall or concrete surfaces including making groove of appropriate size and finished surfaces even & smooth without using extra cement and applying two coats of OBD / Weather coat all as specified and as directed.

M&L for 15 mm thick ready mix plaster in single layer with liquid water proofing compound on fair faces of brick wall or concrete surfaces, finished surfaces even and fair, including use of scaffolding all as specified and directed.

M&L for 12 mm thick Ready Mix Plaster in single layer on other than fair faces of concrete surfaces in wall (internal surface) and finished surfaces even and smooth all as specified and directed.

M&L for applying one coat of wall putty1 mm Average thickness on wall surface including rubbing through all as specified and directed

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of alkali resistant primer coat through authorised applicators of paint manufacturers only of approved shade all as specified and directed

M&L for complete removal of existing treatment of old surfaces of walls and applying two coats of oil emulsion distemper through authorised applicators of paint manufacturers only of approved shade all as specified and directed

M&L for preparing newly plastered surfaces of walls / ceilings and applying two coats of weather proof acrylic exterior paint (100% Acrylic) Base coat and top coat over a coat of alkali resistent primer through authorized applicator only including use of scaffoldings all as specified and directed.

M&L for complete removal of existing treatment of old plastered surfaces of walls / ceilings and applying two coats of weather proof acrylic exterior paint (100% Acrylic) Base coat and top coat over a coat of alkali resistent primer through authorized applicator only including use of scaffoldings all as specified and directed.

Tanking down old cupboard shutter or vanity shutter including all fitting all as specified and directed.

S&F 18 mm thick Both Side pre laminated HDHMR Board of any colour, matt surface finish, grade I as per IS 14587, for frame and shutter with 18 mm wide pvc strips lipping for kitchen cabinets all as specified and directed.

S&F of round stainless steel cabinet/drawers handlers dia of 27mm all as specified and directed.

S&F medium weight, cold rolled mild steel, SS finish, (Partial overlay/fully overlay of any type) diameter of cup 35mm, Hinge cup depth 11.5mm, self-closing all as specified and directed.

Taking down shutters of any description nexc 1 sqm each all as specified & directed.

Taking down shutters of any description area exc 1 sqm but nexc 2 sqm each all as specified & directed.

Refixing of shutters of any description not exc 1 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws all as specified and directed.

Refixing of shutters of any description exc 1 Sqm but not exc 2 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exc 15 cm thickness (below or above ground level) all as specified and directed.

M&L 40 mm thick PCC 1:2:4, type B1 (using 20 mm graded crushed stone aggregate) as in levlling course all as specified and directed.

M&L 75mm thick PCC 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection all as specified and directed.

Dismantling, floor hearth or wall tiling inclduing cement mortar bedding and removing rubbish off the site out side MD land all as specified and directed.

Dismantling, stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar all as specified and directed.

M&L for first and premium quality vitrified coloured marble finished digital tiles 1200 mm x 600 mm x 8 to 10 mm thick, in skirting, dados, risers to steps, etc set and jointed in neat cement slurry, and pointed in coloured cement to match the shades of the tiles laid over and including 10mm thick rendering or backing layer in cement mortar 1:4 all as specified and directed.

M&L for first and premium quality of vetrified coloured marble finished digital tiles size 600 x 1200 x 8 to 10 mm thick polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles laid over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed.

M&L machine cut kota stone slab flooring 20-25 mm thick (bull nosing with three anti skid grooved) in one piece over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish inluding Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes all as specified and directed.

M&L first and premium quality of pvc vinyl flooring 0.45 mm thick, in floors, design and colour as aprroved by GE etc. set and jointed with suitable adhesive as per manufacturer insturctions all as specified and directed.

M&L for first and premium quality of non skid, joint free ceramic “coloured” tiles of size 300 x 300 x 6-7 mm thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 all as specifed and directed.

M&L for first and premium quality of non skid, ceramic “coloured” tiles of size 300 x 300 x 6-7 mm thick, cut to size in vertical surface, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles laid over and including 10 mm thick rendering or backing layer in cement mortar 1:4 all as specified and directed

M&L for first and premium quality Glazed ceramic coloured digital tiles 600 mm x 300 mm x 8 to 9 mm thick, in skirting, dados, risers to steps, etc set and jointed in neat cement slurry, and pointed in coloured cement to match the shades of the tiles laid over and including 10mm thick rendering or backing layer in cement mortar 1:4 all as specified and directed.

M&L for Vitrified double charged tiles any shade size 600 x 600 x 8-10 mm thick (square/ rectangular) polished in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed.

M&L for Vitrified double charged tiles any shade size 600 x 600 x 8-10 mm thick cut to size (square/ rectangular) polished, on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles, laid over and including 10mm thick rendering or backing layer in cement mortar 1:4 all as specified and directed.

M&L for HD Ceramic tiles any shade size 600 x 600 x 8-10 mm thick (square/ rectangular) polished in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match shades of the tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed.

M&L for HD Ceramic tiles any shade of size 600 x 600 x 8-10 mm thick cut to size (square/ rectangular) polished, on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles laid over and including 10mm thick rendering or backing layer in cement mortar 1:4 all as specified and directed.

M&L for glazed ceramic exterior wall tiles 6 to 8 mm thick not exc 0.36 sqm, etc. set & jointed in cement slurry and pointed in coloured cement to match the shade of tile laid over and including 10mm thick rendering or backing layer in cement mortar 1:4 all as specified & directed.

M&L for heavy duty outdoor vitrified tiles dark or light shade 12-15 mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles laid over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed.

M&L in repairs 8 mm thick laminated wooden flooring, water resistant, termite resistant, polished flooring in a flating glue less click locked & sealed flooring similar to a jigsaw puzzle.In this method, the individual planks are locked on the each other by means of the clicking together but do not attach to the sub floor on which it is being installed all as specified and directed.

S&F in repairs Aluminium composite panel sheet 3mm thick PVCF wooden finished of brand name 'Euro bound'/"Alstrong"./ "Viva" fixed with necessary aluminium tube of size 25mm x 38mm x 1.5mm thick with required silicon & screw as in ceiling/columns and in vertical surface all as specified and directed.

M&L for Granite stone best quality (of any type) 18 to 20 mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed

Molding(full moulding) of granite slab edges as directed by Engr-in-charge including polishing all as specified and directed.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets all as specified and directed.

S&F for 12 mm thick plywood, grade BWP type BB fixed with brass screws and cups to timber frame work all as specified and directed.

S&F for 6 mm thick plywood, grade BWP type BB fixed with brass screws and cups to timber frame work all as specified and directed.

M&L Decorative laminate 0.9 mm thick type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions all as specified and directed by engr in charge.

S&F 1 to 2 mm thick veneered desinger natural wood grain sheet fixed with adhesive as per manufactrue instruction to plywood work all as specified and directed.

S&F Plain fillets of second class hard wood, square or rectangular in section, clean sawn, wrought, secured with nails or brads; sectional area exc 6 Sqcm but not exc 13 Sqcm all as specified and directed.

M&L for French polishing on new wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats through authorised applicators of paint manufacturers only of approved shade all as specified and directed.

M&L French polishing on old wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats through authorised applicators of paint manufacturers only of approved shade all as specified and directed

S&F in repairs 0.5 to 1 mm thickness 3D acrylic washable wall papers fixed with adhsive as per manufacture instruction as in ceiling/coloumns and in vertical surface of walls all as specified and directed.

S&F in repairs 12 mm thickness fluted WPC indoor panel fixed with necessary aluminium tube of size 25mm x 38mm x 1.5mm thick with required Silicon & screw as in ceiling/columns and in a vertical surface all as specified and directed.approved sample as kept in GE Office.

S&F in repairs 10 to 12 mm thick toughned glass as in door shutters, plateform, partition including necessary cutting to shape, drilling holes as required, jointing cleats, glazing clips, ruber neoprene packing , Stainless steel fittings such as handle 2 nos,100mm hinge 3 Nos, lock including keys 1set, Stainless steel snap beading & screws all as specified and directed

S&F frosted film / sunfilm / logo in any type or design and size all as specified and directed.

M&L for Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately)

M&L Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre all as specified and directed.

M&L for E-board tiles ceiling on GI powder coated channel/Tee/Grid of make (Armstrong or equivalent) frame work with the following specification including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B0 / Cement mortar 1:3 all as specified and directed with following:- (a) M&L for Plugging to wall around the rooms & S&F GI powder coated angle of make (Armstrong) of size 25 x 25 mm (b) S&F 1.60 mm dia GI wire suspenders with adjustable clamps including fixing to ceiling with dash free fastners (c) S&F GI powder coated Tee as in main & cross members at 595 mm centre to centre supported suspenders along with adjustable camp to maintain level. (d) S&F E-board ceiling tiles of size 595 mm x 595 mm x 4 mm thickness, confirming to relevant IS in squares of GI powder coated Tee with clips made to shape, shade and pattern of tiles shall be as approved by GE

M&L insulated PVC Wall Lining without PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick wood grain printed single side prelaminated PVC sheet duly fitted into the wall as per specifications and drawing all as specified and directed.

S&F Solid PVC wall Lining consisting of 5 mm thick single side prelaminated PVC sheet inclusive of solvent cement and fixing at site on PVC frame all as specified and directed

S&F 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame all as specified and directed.

S&F PVC ceiling wihtout insulation panels with EPS stuck to 1mm Printred PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing.

M&L Anodised aluminium snap grid frame work for false ceiling / PoP Ceiling all as specified and directed.

S&F in repairs Stainless steel sink 1.00 mm thick for kitchen, with plug ,waste pipe, washers including cantilever cast iron bracket, connecting union over all size 495 mm x 420 mm with bowl size 410 mm x 330 mm x 160 mm all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store for 15 mm bore all as specified and directed

Taking up or down steel tubing and connection including cleaning for refixing or removal to store for 20 mm bore all as specified and directed

S&F UPVC pipes outside dia 16 mm of pressure rating 10 Kgf/Sqcm, fixed to walls, ceilings or in floors all as specified and directed

S&F UPVC pipes outside dia 20 mm of pressure rating 10 Kgf/Sqcm, fixed to walls, ceilings or in floors all as specified and directed

S&F tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floor for 15 mm bore all as specified and directed

S&F tubes medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floor for 20 mm bore all as specified and directed

Refixing of old steel tubing and connection in new or old portion (walls ceiling, floors etc) for 15 mm bore all as specified and directed

Refixing of old steel tubing and connection in new or old portion (walls, ceiling, floors etc) for 20 mm bore all as specified and directed

M&L for Cutting chases, pinning in & making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm girth but not exc girth 20 cm in brick/stone wall all as specified and as directed.

S&F in repairs vitreous china white wash basin flat back of size 550 x 400mm excluding taps, waste, chain, and plug and porcelain stopper but including brackets & cutting for and pinning in end of brackets or erecting stand all as Specified and directed. Sample as approved by GE

S&F for pillar taps cast copper alloy fancy type with capstan head, chromium plated screwed down high pressure with or fly nuts screwed for 15 mm bore iron pipe and fixed all as Specified and directed.

S&F in repairs Chromium plated brass angle valve for 15mm bore pipe all as Specified and directed.

S&F in repairs two way angle valve cock chromium plated brass fancy type bore 15mm all as Specified and directed.

S&F in repairs plastic seat cover black/white of pattern W.C including fixing divice and Chromium plated nuts all as Specified and directed.

S&F in repairs vitreous china wash down water closet of Pedestal pattern white including making connection to trap and to flushing pipe and making good to floor all as Specified and directed.

S&F in repairs CP brass toilet paper holder superior quality all as specified and directed.

S&F in repairs CP brass soap dish superior quality all as specified and directed.

S&F in repairs Health foucet including PVC pipe 1.50m long with brass nuts for EWC all as specified and directed. Sample as approved by GE

S&F in repairs PVC flushing cistern 10 ltr capacity with inlet, ball valve, float and handle and 32mm bore flush pipe including bracket all as specified and directed

S&F in repairs PVC connection 15mm dia and 45cm long with 2 Nos PTMT nuts all as specified and directed

S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with CP bracket guard and railing 60 cm long all as specified and directed. Sample as approved by GE

Demolition & Cleaning the sunken floor surfaces by wire brushes, brooming, removing dust all as specified and directed

M&L 10 mm thick ready mix plaster in single layer with liquid water proofing compound on fair faces of brick wall or concrete surfaces, finished surfaces even and fair for sunken portion all as specified and directed.

Applying three coat URP waterproofing chemicals for water proofing coating mix URP- cement in the ratio 1:1.5 by volume on new plastered surfaces as per manufature instruction for sunken portion all as specified and directed.

S&F UPVC pipes out side dia 16 mm of pressure rating 10 Kgf/Sqcm, spout pipe fixed in floors all as specified and directed

M&L PCC 1:5:10, type E-2 (using 40mm graded crushed stone aggregate) in foundations, filling and mass concrete including sub base of floors all as specified and directed.

S&F in repairs vitreous china wash down water closet of "Orissa" pattern size 580 x 440 mm white with integral foot rests, including connection to trap and to flushing pipe and making good to floor all as specified and directed.

S&F in repairs bib taps long body cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore all as specified and directed.

S&F in repairs bib taps short body cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore all as specified and directed.

Demolition and breaking up drain pipes (SGSW, AC or RCC, CI ) of internal dia 75/110 mm, set in cement mortar all as specified and directed.

S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, 110mm bore all as specified and directed.

S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, 75 mm bore all as specified and directed.

S&F PVC (SWR) bends any radius, 110 mm bore all as specified and directed.

S&F PVC (SWR) bends any radius, 75 mm bore all as specified and directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal radius, 110 mm bore all as specified and directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal radius, 75 mm bore all as specified and directed.

S&F PVC (SWR) branch piece, single (single T) equal or unequal radius, 110 mm bore all as specified and directed.

S&F PVC (SWR) branch piece, single (single T) equal or unequal radius, 75 mm bore all as specified and directed.

S&F PVC (SWR) reducers, 110 mm bore all as specified and directed.

S&F PVC (SWR) reducers, 75 mm bore all as specified and directed.

ASHOK CONSTRUCTION

HINDUSTAN BUILDERS

sri construction

Unity Enterprises

Anil Industrial Corporation

Panther Facilities

SHRI SAI ENTERPRISES

Bidder Name

HINDUSTAN BUILDERS

Unity Enterprises

ASHOK CONSTRUCTION

Anil Industrial Corporation

SHRI SAI ENTERPRISES

Panther Facilities

GANGAJAL

sri construction