8316/E8

Amount

Demolition of brick work , built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, in roof covering including ridges and keeping serviceable sheets in safe custody for reuse in the work complete as directed upto any height of building including necessary sacffolding and safety measure.

Taking up or down 15 mm bore steel tubing and connection including cleaning for refixing including necessary scaffolding and saftey masures upto any height of building with scaffolding and safety measure all as specified and directed.

Taking up or down 20 mm bore steel tubing and connection including cleaning for refixing including necessary scaffolding and saftey masures upto any height of building with scaffolding and safety measure all as specified and directed.

Taking up or down 25 mm bore steel tubing and connection including cleaning for refixing including necessary scaffolding and saftey masures upto any height of building with scaffolding and safety measure all as specified and directed.

Taking up or down 40 mm bore steel tubing and connection including cleaning for refixing including necessary scaffolding and saftey masures upto any height of building with scaffolding and safety measure all as specified and directed.

Taking down PVC(SWR) soil waste/ RWP including fittings such as bend, branch piece and shoe complete with necessary scaffolding upto any height of building with safety measure complete all as specified and as directed.

Dismantling 100mm dia cast iron pipe with fittings in foul places including necessary scaffolding and safety measure upto any height of building.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Materials and labour Precast cement concrete jalli 35mm thick 1:2:4, type B-0( using 12.5mm graded crushed stone aggregate ) including formwork and set in CM 1:4 complete all as specified and as directed including taking down old unserviceable Jalli..

Material and labour Chipping of unsound/weak concrete materials of 15mm to 25mm thick from cloumn/ beam/slabs/chajja with standard power driven percussion type or pneumatic chiesel of standard make including tapering all edges, making square shoulders of cavities etc upto any height of building including necessary scaffolding and safety measure complete all as specified and as directed by the Engr-in-Charge.

Material and labour Removing concrete all around reinforcement including behind of bars to give an average clearance of 25mm (but not less than 15mm clear air gap) by manual methods (hammering and using wire brushes, chieselling etc.) length of reinforcement bars cleared of concrete shall be measured for payment including upto any height of building with necessary scaffolding and safety measure complete all as specified and as directed by the Engr-in-Charge.

Material and labour Cleaning of exposed concrete surfaces of lightly sticking materials including foreign materials, loose concrete/ aggregate etc and disposal of all debris upto distance of 50 m and applying single coat of epoxy bond adhesive on prepared non metallic surfaces (existing surface) by using brush as per manufacturers instruction / specification upto any height of building with necessary scaffolding and safety measure complete all as specified and as directed by the Engr-in-Charge. Make : Fosroc/Elantas beck/Kunal conchem

Material and labour Exposing the corroded reinforcement upto and including 16mm dia of bar completely along its full circumference, cleaned to remove all loose scale and corrosion deposit, applying rust removing chemical followed by removing the rust by emery paper and cleaning the area thoroughly by water and allow it to dry as per manufacture's instruction upto any height of building with necessary scaffolding and safety measure complete all as specified and as directed by the Engr-in-Charge. Make : Fosroc/Elantas beck/Kunal conchem

Supply and application Epoxy Zinc rich primer on the prepared reinforced surface by brush, the primer shall have a minimum specific gravity 1.75, minimum wet film thickness/coat 100 microns & dry film thickness/coat 40 microns. Minimum adhesive bond strength with steel is 1.5 N/mm2 upto any height of building with necessary scaffolding and safety measure complete all as specified and as directed by the Engr-in-Charge. Make : Fosroc/Elantas beck/Kunal conchem

Materials and labour Introducing new reinforcement bars for structural connections in RCC beam, lintels, columns and slabs etc including power drilling holes of appropriate diameters in reinforced or plain cement concrete to a minimum depth of 150mm upto 200mm including power drilling, fixing the reinforcement in position using epoxy after dusting of loose dust by blowing air, sealing the same with epoxy cartridges etc as per manufacturer instruction for upto 12mm dia of bar including necessary scaffolding and safety measure complete all as specified and as directed by the Engr-in-Charge.

Supply and Application Free flow non-shrink cementitious micro concrete to the affected beam, column etc. above 25 mm but upto 60mm thickness (average) where major spalling has taken place even the core of concrete affected. The Micro concrete shall have a minimum 1 day compressive strength of 10 MPa and 28 days strength of 50 MPa, Minimum tensile strength 2 N/mm2 @ 28 days, minimum Flexural strength 5 N/mm2@ 28 days tested as per BS 4551-80, Expansion characteristics Unrestrained expansion as per ASTM C827-1987 1 to 4%. upto any height of building with necessary scaffolding and safety measure complete all as specified and as directed by the Engr-in-Charge. Make : Fosroc/Elantas beck/Kunal conchem

Supply and Application Two component structural grade polymer modified reinstatement mortar where local spalling has taken place or shuttering is not possible. The Mortar can be applied from a minimum of 5mm to 15mm thickness in smaller vertical pockets and upto 100 mm thickness in horizontal applications. The Mortar should have a minimum compressive strength 12 N/mm² in 1 day and 45N/mm² in 28 days. Minimum Flexural strength should be 8 N/mm² in 28 days. A modified styrene butadience emulsion for use as a bonding aid and gauging liquid for cementitous systems to be mixed with cement slurry before the application of microconcrete to be used @ 6 lit/bag of cement. The bonding agent should have minimum compressive strength 24 N/mm² Minimum Tensile strength 3.5 N/mm², Minimum Flexural Strength 6.5 N/mm² complete all as specified and as directed by the Engr-in-Charge upto any height of building including necessary scaffolding and safety measure. Make : Fosroc/Elantas beck/Kunal conchem

Material and labour Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc., and making good, cutting not exc 10Cm girth complete all as directed by Engr-in-Charge.

Material and labour Water proofing materials( BRUSH BOND roof guard) on the tiles/concrete/plastered surface and 3 coat of brush bond roof guard shall be applied @ 1.5 ltr/Sqm in 3 coats at 1mm thickness of each coat by using brush or roller after application of tiles/concrete/plastered surfaces complete all as specified and deirected by Engr-in-charge. (Note :- Drying time between the coats shall be maintained as per manufacturer's instruction and the above application shall be carried out through authorized applicaton of manufacturer) (Make:- FFosroc/De-Rust chemical Corporation of India/CICO/Sika/Dr Fixit

Material and labour Applying Concure LP 90 or equivalent over concrete and cement plaster as curing compound as per manufactures instructions complete all as specified and as directed by the Engr-in-Charge. Make: Fosroc/De-Rust chemical Corporation of India/CICO/Sika/Dr Fixit or equivalent as approved.

Material and Labour Brick work with fly ash bricks of designation 7.5, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directeded.

All as per item No. 24.00 here-in-before but for half brick wall, straight or curve on plan of any radius in cement mortar 1:4.

Materials and Labour Cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 ( Using 20mm graded stone aggegates) complete all as specified and as direcetd.

Supply and Fix Mild steel Framed work such as grills, gratings, gates etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating @ 150 gms/Sqm GI based corrugated steel sheets of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as in roof complete all as specified and directed by the Engr-in-Charge.

Supply and Fix Mild steel rolled sections as in main and cross beams hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates of FE-410-W(GdeE-250) complete all as specified and directed.

Supply and fixing 4mm thick E-board Designer Classic of size 595 x 595 mm fixed as in ceiling over aluminium grid suspended with GI hooks 4mm dia and clamp to hold GI pipe of the following section including taking down old unserviceable one complete all as specified and as directed including applying two coats of acrylic distemper.- a) 25 x 25 x 1.5mm(Minimum thick) aluminium angle. b) 25 x 25 x 1.5mm (Minimum thick) aluminium cross Tee. c) 25 x 35 x 1.5mm (Minimum thick) aluminium main Tee .

Material and labour Vitrified ceramic tiles 10mm thick (square/rectangular) dark shade, polished area of each tiles exc 0.18 Sqm but n.exc 0.38 Sqm (600X 600X10mm), in floors etc, set and jointed in neat cement slurry and jointed in white or coloured cement to match with the existing etc over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Material and labour Vitrified ceramic tiles 10mm thick (square/rectangular), dark shade, polished area of each tiles exc 0.18 Sqm but n.exc 0.38 Sqm (600X 600X10mm), set and jointed in neat cement slurry and jointed in white or coloured cement to matcht as on vertical surfaces such as skirtings, dados, risers etc over 10mm thick backing course in CM 1:4 complete all as specified and directed.

Materials and labour Glazed ceramic colour tiles in vertical surfaces such as skirtings, dados, risers etc of size 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement ot match the tiles over and including 10mm thick backing course in CM 1:4 for receiving tiles.

Material and labour 20mm thick rendering in two layers (Top layer shall be of 10mm thick in CM (1:4) mixed with water proofing compound shall be laid over 10mm thick plastered surface in CM (1:4) on of brick work or concrete surfaces finished the surface even and smooth without using extra cement complete all as specified and as directed by the Engr-in-Charge upto any height of building including scaffolding and safety measure. Note: WPC will be measured and paid separately under respective items of BOQ.

Material and labour Rendering 15 mm thick on brick or concrete surface in CM 1:6 and surface finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Material and labour Rendering 10 mm thick in cement mortar (1:4) on concrete surfaces as in ceilings (sunshade, chajja, soffits of slab etc) and finishing surfaces even and smooth without using extra cement complete all as specified and directed.

Supply only Liquid water proofing compound (WPC) ISI marked complete all as specified and as directed by the Engr-in-Charge. Make : SIKA/Pidilite/Dr Fixit/Fosroc.

Material and labour Preparation of newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed by Engr-in-Charge.

Material and labour Preparation of new plastered external surfaces and applying two coats of cement based paint of any colour / tint over a coat of primer upto any height of building including scaffolding and safety measure complete all as specified and directed by Engr-in-Charge.

Material and labour Preparation of new plastered surfaces of walls and applying two coats of Acrylic distemper of any colour / tint over a coat of primer and 3mm thick wall care putty complete all as specified and directed by Engr-in-Charge.

Supply and fix tubes 15mm bore medium grade galvanised with all fittings and fixed to wall including necessary scaffolding and saftey masures upto any height of building complete to wall and ceiling or laid in floors.

Supply and fix tubes 20mm bore medium grade galvanised with all fittings and fixed to wall including necessary scaffolding and saftey masures upto any height of building complete to wall and ceiling or laid in floors.

Supply and fix tubes 25mm bore medium grade galvanised with all fittings and fixed to wall including necessary scaffolding and saftey masures upto any height of building complete to wall and ceiling or laid in floors.

Supply and fix tubes 40mm bore medium grade galvanised with all fittings and fixed to wall including necessary scaffolding and saftey masures upto any height of building complete to wall and ceiling or laid in floors.

Refixing old steel tubing 15mm bore and connection in new or old position (wall, ceiling, floor etc.) including necessary scaffolding and saftey masures upto any height of building complete all as specified and directed.

Refixing old steel tubing 20mm bore and connection in new or old position (wall, ceiling, floor etc.) including necessary scaffolding and saftey masures upto any height of building complete all as specified and directed.

Refixing old steel tubing 25mm bore and connection in new or old position (wall, ceiling, floor etc.) including necessary scaffolding and saftey masures upto any height of building complete all as specified and directed.

Supply and fix PVC(SWR) pipe, 110mm bore,single socketed, in any length with rubber ring joints fixed to walls upto any height of building including scaffolding and safety measure complete all as specified and as directed.

Supply and fix 110mm bore PVC(SWR) bends of any radius complete all as specified and as directed.

Supply and fix 110mm bore PVC (SWR) junction single,(Single T) equal or unequal complete all as specified and as directed.

Supply and fix 110mm bore PVC (SWR) junction (Single Y) equal or unequal complete all as specified and as directed.

Supply and fix 100mm bore cast iron soil waste and vent pipes (sand cast) in any length with or without ears with cement joint fixed to wall upto any height of building including scaffolding and safety measure complete all as specified and as directed.

Refixing old serviceable 100mm dia cast iron pipe fixed to wall complete all as specified and as directed.

Supply and fix 100 mm bore CI bends (any radius) diminishing pieces or tapers, tee, branch piece ( any radius) in foul position upto any height of building including scaffolding and safety measure complete all as specified and directed.

Materials and Labour CI nahni trap/floor trap with grating for 100 mm dia outlet pipe including making good disturbed area/surfaces with cement concrete/cement mortar 1:3 etc. incluing taking down old unserviceable nahni/floor trap complete all as specifiedc and as directed.

Supply and fix Rotational moulded HDPEe water storage tanks of capacity 1000 litres, multilayer . ISI marked, hoisted and fixed in position, cylindrical vertical with closed top with dismantling of tank including necessary scaffolding and saftey measures upto any height of building all as specified and directed. Make of Water Tank:- SINTEX/POLYCON

Supply and fix Rotational moulded HDPEe water storage tanks of capacity 2000 litres, multilayer . ISI marked, hoisted and fixed in position, cylindrical vertical with closed top with dismantling of tank including necessary scaffolding and saftey measures upto any height of building all as specified and directed. Make of Water Tank:- SINTEX/POLYCON

Supply and fix Rotational moulded HDPEe water storage tanks of capacity 500 litres, multilayer . ISI marked, hoisted and fixed in position, cylindrical vertical with closed top with dismantling of tank including necessary scaffolding and saftey measures upto any height of building all as specified and directed. Make of Water Tank:- SINTEX/POLYCON

Supply and fix in repair 15mm Bib Taps, fancy type, CP, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make : Essco Cat No. MQT -512KN or equivalent model from make:- Marc / Jaquar / Prayag.

Supply & fix in repair 15mm Pillar Taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed. Make : Essco Cat No. MQT 507KN or equivalent model from make:- Marc / Jaquar / Prayag.

Supply and fix in repair 15mm Stop valve, fancy type, CP, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make : Essco Cat No. MQT 513AKN or equivalent model from make:- Marc / Jaquar / Prayag.

Supply and fixing in repair CP Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower) complete all as specified and directed by Engr-in-Charge. Make- Essco Cat Part No SQT -517KN or Equivalent model of MARC/JAQUAR.

Supply and fix in repair Bottle Trap with Fully Casted Body ( with Internal Partition) 32mm with 190 mm and 125mm long Connecting Pipes & Wall Flange complete all as specified and directed by Engr-in-Charge. Make - Essco Cat part No. ALE-773ML190X125 or Equivalent of Jaquar / prayag.

Supply and fix as in repair CP Health Faucet With 1.2Mtrs Tube & Hook all as directed by Engineer - in - Charge . Make-Essco Cat part No.ALE-ESS-583 or equivalent model from make:- JAQUAR/ PRAYAG.

BHASKAR SUPPLY AGENCY

GHOSH ELECTRIC