Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.8 LAccepted-AOC C O KALIPADA MITRA SOUTH BHARAT NAGAR NEAR JAGDISH CHANDRA HIGH SCHOOL SILIGURI DISTT DARJEELING WB 734004 | JALPAIGURI | WEST BENGAL | 734004 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹43.4 L+₹1.1 L (2.70%)Rejected-Finance | L2 | Rejected-Finance Unsuccessful bidder | |
| 3 | L3₹44.7 L+₹2.5 L (5.82%)Rejected-Finance VIVEKANANDA PALLY NEAR MARUTI TEA FACTORY P O BAGDGORA DIST DARJEELING | DARJEELING | WEST BENGAL | 734001 | L3 | Rejected-Finance Unsuccessful bidder | |
| 4 | L4₹45.0 L+₹2.7 L (6.35%)Rejected-Finance | L4 | Rejected-Finance Unsuccessful bidder | |
| 5 | L5₹45.1 L+₹2.9 L (6.80%)Rejected-Finance 16 APC SARANI WARD NO 30 DESHBANDHUPARA PO SILIGURI TOWN DIST DARJEELING PIN 734004 WB | SILIGURI | DARJEELING | WEST BENGAL | 734004 | L5 | Rejected-Finance Unsuccessful bidder |
Tender Value
₹43.5 L
EMD Value
₹87,000
Closing Date
16 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Bagdogra
GE AF Bagdogra Bagdogra Airport PO, Dist Darjeeling, WB - 734421
IMPROVEMENT TO CERTAIN OMQS AT AF STN KURSEONG UNDER GE (AF) BAGDOGRA
2023_MES_615902_1
8522/E8
Open Tender
Civil Works
Item Rate
180 days
Kurseong AF Stn
As per NIT
8 documents required · 8 mandatory
₹500
GE AF Bagdogra
₹87,000
Yes
20 Oct 2023
26 Aug 2023
18 Sept 2023
26 Aug 2023
16 Sept 2023
9 Sept 2023
Amount
S&F water proof Wall Cabinet (including 4 units of each having 500mm depth for one cabinet and remaining 600mm depth of three cabinet and of each having a space depth to the wall 450mm depth) using High Density High Moisture Resistance (HDHMR Make: IKON Interio/ Space wood) Marine plywood boiling water proof, Gde-HDMR Marine plywood 18mm thick with lamination of 1mm each sides of shutters including an aluminium profile handle fixed to door, soft closing hinges, M10 screw type leveller with hexagonal plastic base complete all as specified and as directed.
S&F water proof Base Cabinet {including 4 units (A) 350mm height wide Cargo Bottle pull out kit with two baskets (B) 600mm wide cooking kit consists of two plain baskets of 350mm ht with 175mm ht drawer front & one plain basket of 150mm ht with 350mm ht drawer front Make: Hettich/ Hafele (C) 600mm wide Thali kit with one drawer with cutlery tray, one cup-saucer basket with 100mm ht, one Thali basket 150mm ht for Thali plates (D) 600mm utensil kit with one plain basket 150mm ht along with swing type hinged door 600mm wide unit with one compartment} using High Density High Moisture Resistance (HDHMR Make: IKON Interio/ Space wood) Marine plywood boiling water proof, Gde-HDMR Marine plywood 18mm thick with lamination of 1mm each sides of shutters including an aluminium profile handle fixed to door, soft closing hinges, M10 screw type leveller with hexagonal plastic base complete all as specified and as directed.
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.
M&L for joint free Non Skid glazed ceramic tiles (coloured) 7 to 8 mm thick (square/rectangular) area of each tiles exc 0.11 Sqm but n.exc 0.18 Sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over complete all as specified and as directed.
S&F glazed ceramic coloured tiles (300x200x7mm) thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles in vertical surfaces such as skirting dados etc including over 10mm thick cement plaster in CM 1:4 all as specified and directed.
S&F in repair vitreous china wash basin, white, flat back, size 630x450mm excluding taps, waste chain and plug and porcelain stopper but including brackets, waste coupling, waste pipe complete all as specified and directed. Make-Cera.
S&F in repair 15 mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long shanks and flynuts, screwed for iron pipe complete all as specified and directed. Make - Jaquar.
M&L for Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.
M&L for 15mm thick rendering on fair faces of brick work or concrete surface built in cement mortar 1:4 surface finished fair and even without using extra cement using WPC complete all as specified and as directed. (Note:- Water proofing compound shall be measured and paid separately as supply only).
M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90litre/10 sqm over new surfaces complete all as specified and as directed.
Supply only integral water proofing compound ISI marked complete all as specified and as directed.
M&L for preparation of old painted wooden or wooden based surfaces of any description Over 10cm width or girth and applying one coat of synthetic enamel paint all complete as specified and as directed.
M&L for preparation of old painted wooden or wooden based surfaces of any description Under 10cm width or girth and applying one coat of synthetic enamel paint all complete as specified and as directed.
M&L for preparation of old painted steel or iron surfaces as of any description of any description over 10cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for 32mm dia waste fittings, brass, chromium plated for glazed wash sinks, basins etc with long screwed shanks and fly nuts, flange, end bedded in lead cement complete all as specified and as directed.
M&L for 40mm dia waste fittings, brass, chromium plated for sinks, basins etc with long screwed shanks and fly nuts, flange, end bedded in lead cement complete all as specified and as directed.
S&F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed.
M&L for 16 to 18mm thick granite (of any type) in kitchen platform machine cut and mirror polish, bedded over cement mortar screed 15mm thick 1:4 and jointed in grey cement slurry and pointed in white cement with admixture of pigment to match the shade of granite stone including grinding etc complete all as specified and directed.
M&L for Taking down chowkats but with shutters (without taking of shutters from the frames) area exc 1.5 sqm and not exc 4 sqm each and removing from the site complete all as specified and as directed.
S&F factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
S&F factory made uPVC white colour Two track two panels sliding glazed window upto 1.50m height made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wire mesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
S&F sheet glass, 5.5mm thick, ordinary quality and glazing with rubber beading, cleats in necessary to aluminium door/windows etc area exc 0.5 Sqm in each pane complete all as specified and as directed.
M&L for veneered particle board interior grade solid core, general purpose type with face veneers of type BB" fixed with screw to timber frame work and faced with decorative veneer on both faces complete all as specified and as directed.
Excavation in post holes n.exc 0.5m getting out, returning, filling in and rammed earth or broken rubble mixed with earth around, in layers not exc 25 cm and removing surplus soil n.exc 50m and making good surfaces in Hard/Dense soil complete all as specified and as directed.
M&L for plain cement concrete (1:3:6), type C-1 (using 20mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.
S&F FE-410W (Gde-E-250) quality 'B' rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails fixed with angle cleats or other connecting plates all as specified and as directed.
S&F Pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.
M&L for two coats of synthetic enamel paint on steel surfaces over 10cm in width or grith including one coat of primer, preparation of new surfaces complete all as specified and as directed.
M&L for framed work such as grills or grating etc with ends of bars shouldered as framed guard bars conforming to Fe-410-0 or 310-0 all as specified and directed.
Dismantling wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets complete all as specified and as directed.
S&F 4mm thick non asbestos fibre cement boards fixed as in ceiling with & including GI snap grid frame work, comprising of main aluminium section of size (23.5x36.5x1.8mm) and secondary type of size 23.5x23.8x1.28mm alongwith span with the help of aluminium angle of size 23.5x36.5x1.6mm fixed to wall for false ceiling including necessary supporting hanger with 6.0mm dia G wire with 'J' bolt washers nuts for securing frame work to ceiling suspended @ 1.2m both way of grid shall be 610x610mm etc applying two coats of oil bound distempering over a coat of chalk whitening including preparation of new surface on ceiling complete as directed.
M&L for taking down carefully copper/ aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc complete all as specified and as directed.
M&L for taking down carefully unserviceable main switch and DB's including MCBs of of any size make, type and capacity and depositing at site complete all as specified and as directed.
M&L for concealed point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC insulated and unsheathed FRLS cable 1100 volts grade drawn through and including non metallic rigid PVC Concealed conduit, medium grade minimum 20 mm dia ISI marked and conduit accessories fixed on recesses of wall/ceiling/roof etc with sunken type pressed steel/welded MS terminal boxes made out of 1.2 mm MS sheet, 3mm thick Modular top cover for mounting of modular fittings, switches, sockets outlets, regulators etc complete including provisioning of 1.5 sqmm PVC insulated unsheathed FRLS cable 1100 volt grade with multi stranded copper conductor to common earth and connected to earth dolly for One light point/Fan/call bell point controlled by one 1 way switch complete all as specified and as directed. Note: Cutting chases and making good shall be measured and paid separately.
All as per item No 34 above, but for One 3 pin 5 Amps socket outlet on same board with other switch complete all as specified and as directed.
All as per item No 34 above, but for One 3 pin 5 Amps socket outlet on independent board with cable of 1.5 sqmm size complete all as specified and as directed.
All as per item No 34 above, but wiring with 4 sqmm multistranded copper conductor unsheathed and 4 sqmm copper conductor unsheathed cable as earth continuity conductor for one 3 pin 15 Amps socket outlet point on independent board complete all as specified and as directed.
M&L for concealed sub main wiring using two single core 6 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade (FRLSH) ISI marked drawing in and including 20mm dia rigid non metallic PVC conduit/casing capping & accessories like bends, tee, etc fixed on recess of wall and ceiling and connecting to earth dolly and including 6 Sqmm earth wire, PVC insulated & unsheathed complete including taking down old submain complete all as specified and as directed. Note: (i) 2 runs of main wire, 1 run of earth wire, 1 run of conduit with accessories shall be measured as one length. (ii) Cutting chases and making good shall be measured and paid separately.
M&L for concealed sub main wiring using two single core 4 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade (FRLSH) ISI marked drawing in and including 20mm dia rigid non metallic PVC conduit & accessories like bends, tee, etc fixed on recess of wall and ceiling and connecting to earth dolly and including 4 Sqmm earth wire, PVC insulated & unsheathed complete. Note: (i) 2 runs of main wire, 1 run of earth wire, 1 run of conduit with accessories shall be measured as one length. (ii) Cutting chases and making good shall be measured and paid separately.
S&F in repair 12W LED wall light made up of unbreakable poly carbonate suitable for mounting on wall/surface, including necessary connection all as specified and directed.
S&F LED Tube light lights fitting 1x 22W, 220V, AC decorative box type with CRCA body pre-cotaed white & pre wired for driver, holder connecting up with LED down rod three core flexible copper conductor cable of suitable size from ceiling rose including 1 X 22W LED tube Rod complete all as specified and directed.
S&F LED tube light fitting mirror type with high out put diffuser 2 feet, 10 Watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S&F 10W LED Bulkhead light, pressure die cast housing LED bulkhead with IP 65 Protection and IK 09 Impact resistance suitable for surface/ wall mounted, complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.
S&F Modular switch, one way 5/6 Amp, 1 module, 240 Volts complete all as specified and directed.
S&F Modular socket, 2/3 pin, 6 Amps, 2 module, 240 Volts complete all as specified and directed.
S&F Modular Switch, 16A, 1 way, 1 module, 240 volts complete all as specified and directed.
S&F modular socket, 6/16A, 3 pin, 2 module, 240 volts complete all as specified and directed.
S&F Modular Bell push, 6A, 1 module, 240 volts complete all as specified and directed.
S&F Modular Buzzer, Ding Dong, AC. 230 volts, single pole complete all as specified and directed.
S&F ceiling rose surface bakelite, two to three terminal 65x50mm, three terminal 250/230 volts, ISI marked complete all as specified and directed.
M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth complete all as specified and directed.
S&F in repair Factory made DB in sheet steel enclosure vertical double door with 200 Amps rated bus bar, TPN, 4 ways, 240 Volts suitable for housing MCBs as incomer and SP MCBs as outgoing complete all as specified and as directed.
S&F in repair Factory made board distribution in sheet steel enclosure double door glazed with 200 Amps rated bus bar, SPN, 8 ways, 415 Volts suitable for housing MCBs complete all as specified and as directed.
S&F MCB, TPN, 415 volts, C Curve, 63 Amps, 10 KA, 4P complete all as specified and as directed.
S&F in repair MCB, SPN, 240 volts, C Curve, 32 Amps, 10 KA complete all as specified and as directed.
S&F in repair MCB, SP, 240 volts, 6 to 32 Amps, 10 KA complete all as specified and as directed.
M&L, in repair, earthing complete with galvanized steel earth plate electrode of 60cm x 60cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth wire of 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I all as specified and testing on completion including provision of earth lead protected by 15 mm dia light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work, PCC pit with RCC cover, char coal, salt, funnel etc complete. Note:- Rate quoted by tenderers shall be deemed to include for following provisions:- [i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 m. [ii].PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 20mm bore medium grade & copper lugs, charcoal & salt as reqd.[v]. GI protection pipe of size 15 mm bore light grade 7.5m.
S&F in repair test point terminal block made of gun metal or phosphorus bronze of size 75x75x25mm drilled and screwed including 3 Nos, 8mm dia, 25mm long hexagonal headed screws complete all as specified and directed.
S&F 35W LED Bldg security light with System output not less than 110 lumens/watt. Luminaire should have pressure die cast Aluminium LM6 housing, Min IP protection should be IP66, maintenance, PF>0.95 & Input voltage range 120-277VAC.
M&L for replacement of 32 mm bore light grade GI pipe fixed as bracket, on wall any type, not less than 1.5 m long and bent to shape as required complete with suitable clamp, made out of 25x4mm Flat iron, duly fixed 12mm dia nuts, bolts, washers etc. suitable for steel tubular/ PCC pole complete all as specified and directed by Engineer-in-Charge.
S&F in repair power unit with 20A MCB & Plug 240 volts complete for Geyser all as specified and directed.
S&F in repair Motor Starter, 25A 240 volts complete for Geyser all as specified and directed.
S&F wall mounted Modular electronic chimney in kitchen with Maximum Suction 1000 m³/hr, Stainless Steel Baffle Filter, Push Control, Energy efficient LED lamps, 220-240V, 50HZ. Dimension of chimney 600x500x690mm. Make: Hindware, Model-JUPITER NEO BLK 60 DECORATIVE CHIMNEY or equivalent model in Faber, Elica, Glen.
S&F exhaust fan, made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as specified and directed.
NOTES :- 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum.
M/s Chakraborty Enterprise
M/s Prakash Traders
RABI BANIK
SUNIL DAS AND CO
M/S MOHAN GHOSH
SREE SWAPAN KUMAR GHOSH
RAMKRISHNA NARAYAN ROY & CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .