AUGMENTATION OF WATER SUPPLY AT KOLKATA MIL STN

Amount

Excavation in trenches n. exc 1.5 mtr wide and n. exc 1.5 mtr in depth for foundation etc or for laying of water supply pipe line/UG cable etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as directed.

Returning, Filling in including Spreading, Levelling, Watering, Well Ramming in Layers not exc. 25 Cm as in Soft/Loose Soil, complete all as specified and as directed.

Removing excvated material (Soil of any type) n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed.

Excavation in trenches n. exc 1.5 mtr wide and n. exc 1.5 mtr in depth for foundation etc or for laying of water supply pipe line/UG cable etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out in hard/dense soil complete all as directed.

Taking up 80 mm bore old unservicable CI/DI water mains (including all fittings),with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and as directed.

Aii as per item no 5.00 here-in-above but for 100 mm bore

Aii as per item no 5.00 here-in-above but for 150 mm bore

Supply and laying in trenches Ductile iron water pipeline, socket & spigot end conforming to IS: 8329-2000 including specials, class "K-9" of dia 80 mm including tyton jointing kit / materials complete all as specified and directed.

Aii as per item no 8.00 here-in-above but for 100 mm bore

Aii as per item no 8.00 here-in-above but for 150 mm bore

Supply and laying in trenches Ductile iron water pipeline, socket & spigot end conforming to IS: 8329-2000 including specials, class "K-7" of dia 100 mm including tyton jointing kit / materials complete all as specified and directed.

All as per item no 11.00 here-in-above but for 150 mm bore

M & L for Ductile Iron Pipes Fittings upto 200mm bore pipes conforming to IS: 8329-2000, such as Bends (any types, radius and angle), Tapers any type (straight bend, increasing, decreasing or double socket etc.) Tee Pieces, Single branch, Junction, Y-Junction, Double Branch, Cross (all sockets and or socket and spigot) Collars, Caps and Plugs, etc. including jointing as recommended by Manufacturer, complete all as specified and as directed.

Taking out old unserviceable sluice valve of size 80 mm bore of any description and removal from site of work complete all as specified and as directed.

Aii as per item no 14.00 here-in-above but for 100 mm bore

Aii as per item no 14.00 here-in-above but for 150 mm bore

S&F cast iron sluice valve 80 mm dia conforming to IS: 14846, both ends flanged of class PN-1.6 and drilled stainless steel spindle, CI gate with brass ring and iron wheel handle cast iron cap stuffing box etc including joints materials i.e, nuts, bolts , washers, rubber insertion sheet etc complete all as specified and as directed.

All as per item no 17.00 here-in-above but for 100 mm bore

All as per item no 17.00 here-in-above but for 150 mm bore

Taking out old unserviceable reflux/air release valve of size 150 mm bore of any description and removal from site of work complete all as specified and as directed.

Supply, jointing and testing Cast iron reflux valve with by pass arrangements suitable for 100mm bore pipes, conforming to IS, with MS nuts, bolts, washers, etc, any pattern, and testing complete, complete all as specified and as directed.

All as per item no 21.00 here-in-above but for 150 mm bore

Supply, jointing and testing of Ductile iron Air release Valve with single air outlets of size 50 mm bore confirming to IS 14845 and fixing up in cast iron water supply mains of size 100 mm dia complete all as specified and as directed.

Taking down/out old unservicable GI/steel tubing 40 mm bore including all fittings and fixture from floor/wall or trenches including cleaning and stacking for refixing/reuse and removal unuseable materials from site of work complete all as specified and as directed.

All as per item no 24.00 here-in-above but for 50 mm bore

All as per item no 24.00 here-in-above but for 80 mm bore

All as per item no 24.00 here-in-above but for 100 mm bore

Supply and laying GI pipe 40 mm bore medium grade including all new fittings (such as bends,elbow,tees,connectors,caps,plugs,unions,dewatering from trenches) including cutting ,screwing as required and fixed to wall,trench or roof or laid in plinth protection floor including fixing wall hooks,cutting through wall,floors etc and making good the disturbed surfaces with cement mortar (1:3) after fixing the tubes of any situation in old/new position complete all specified and as directed.

All as per item no 28.00 here-in-above but for 50 mm bore

All as per item no 28.00 here-in-above but for 80 mm bore

All as per item no 28.00 here-in-above but for 100 mm bore

Taking down/out old unserviceable 40 mm bore gate valve opening carefully and screwed both ends from iron pipes from floor/wall or trenches and removal from site of work complete all as specified and as directed.

All as per item no 32.00 here-in-above but for 50 mm bore

S&F gun metal,globe or gate valve of size 40 mm bore conforming to IS: 778 with iron wheel head screwed both ends for iron pipe & fixed of size complete all as specified and as directed.

All as per item no 34.00 here-in-above but for 50 mm bore

M & L for construction of brick masonry valve pit of size 120X120X120 CM, (internal dimension) one brick thick wall built in cement mortar 1:6,15 mm thick plastering in CM(1:4) (internally),150mm thick PCC 1:4:8 (using 40mm graded aggregate) in foundation, rendering 15mm thick externally upto 15cm below GL in CM(1:4) including 6.0mm thick MS valve pit cover, welded with 40X6mm flat iron frame around and provision of hinges, handle and locking arrangement, 40X40X6mm angle iron frame fixed on top by means of hold fast 150mm long embedded in PCC 1:2:4 (20mm graded aggregate) hold fast block,including coping,100 mm thick PCC flooring in (1:2:4) type B1 including applying two coats of anti-corrosive paint over a coat of red oxide zinc chrome primer to exposed steel surfaces and necessary earth work in soft/loose soil, complete all as specified and shown in zonal drawing and as directed by Engg-in-charge.

Supply, install, testing & commissioning of centrifugal pump of capacity 10 HP,2900 RPM of discharging 150 LPM at 80 mtr head ,electric motor AC 3 phase 415 volts,50 Hz including PCC basement of the pump as per site of manufacturer instructions and testing complete with all electrical connectionas as per direction of Engg-in-charge. Note : The dismantled pump shall be depostited at MES store yard as directed by Engr-in-Charge

Supply, install, testing & commissioning of centrifugal pump of capacity 7.5 HP,1440 RPM of discharging 15 LPM at 15 mtr head ,electric motor AC 3 phase 415 volts,50 Hz including PCC basement of the pump as per site of manufacturer instructions and testing complete with all electrical connectionas as per direction of Engg-in-charge. Note : The dismantled pump shall be depostited at MES store yard as directed by Engr-in-Charge

M & L Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

M & L Plain cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

M & L for construction of brick masonry valve pit of size 1050X1050X1050 MM, (internal dimension) one brick thick wall built in cement mortar 1:6,15 mm thick plastering in CM(1:4) (internally),150mm thick PCC 1:4:8 (using 40mm graded aggregate) in foundation, rendering 15mm thick externally upto 15cm below GL in CM(1:4) including 3.0mm thick MS valve pit cover, welded with 40X6mm flat iron frame around and provision of hinges, handle and locking arrangement, 50X40X6mm angle iron frame fixed on top by means of hold fast 150mm long embedded in PCC 1:2:4 (20mm graded aggregate) hold fast block,including coping,100 mm thick PCC flooring in (1:2:4) type B1 including applying two coats of anti-corrosive paint over a coat of red oxide zinc chrome primer to exposed steel surfaces and necessary earth work in soft/loose soil, complete all as specified and shown in zonal drawing & as directed by Engg-in-charge.

Supply, install, testing and commissioning horizontal centrifugal pump of capacity 30 HP(22KW) electric driven, 3 phase, 415 Volts, 50 Hz, flow 31/M³/h, 110 m head, 44% efficiency, 65 mm internal dia, 65 mmm outlet dia, installation angel of outlet (0º, 90º and 180º), 315 mm nominal dia of impeller, Booster Pump type, single stage, Y/Y2 series motor, 2900 RPM, impeller material 304/316 stainless steel, seal material (304 stainless steel, tunggsten carbide, florine rubber), inlet max pressure 1 MPa alongwith starter including PCC foundation as per site of manufacturer instrcutions and testing complete a;; as spcified and directed.

S&F DOL Starter suitable for 3 phase 7.5HP motor complete all as specified and as directed.

S&F FASD Starter,440 V,50 Hz, suitable for 3 phase 10 to 17.5HP motor complete all as specified and as directed.

Shifting, installating, testing and commisioning of IRP facility from Bhatacharya Enclave to Triangular park Hasting including RCC foundation of capacity 10000 gallon/hr as approved by GE complete all as specified and as directed.

Opening top of 10,000 GPH capacity pressure filter, vertical type, unloading the filter media from the pressure filter e.g sand gravels (different sizes), taking out carefully strainer (Push/Thread) from inside bed plate, cleaning the inside bed plate & strainer fixing holes on the bed plate, disposal of sand within 100 meter radius from the existing filter plant, segregate the different sizes of old gravels washing the serviceable gravels by 3% strength HCL, clean the gravels by clear water to remove iron scales on the old gravels cleaning the PVC old serviceable strainer by concentrated hydrochloric acid complete all as directed by Engineer-In-Charge. Note : Sand and gravels if required to be replaced shall be measured and paid as "Supply only under relevant items here-in-after.

Supply only filtering coarse sand 16/32 for filter media complete all as specified and as directed.

Suply only Gravel 1/4" to 1/10" complete all as specified and as directed.

Suply only Gravel 1/2" to 1/3" complete all as specified and as directed.

Suply only Gravel 3/4" to 1" complete all as specified and as directed.

Suply only Resin complete all as specified and as directed.

Development of Tube well with suitable capacity compressed air for a period not less than 24 Hrs till the sand free water is obtained (sand content of water shall not be more than 10 ppm) complete all as specified and as directed.

Supply, jointing and testing for outdoor end terminal joints cold shrinkable suitable for HT 11000V, XLPE insulated armoured heavy duty under ground cable including joint kits and labour complete for making joints suitable for aluminium conductor cable of cross sectional area 95sqmm, 3 core, complete all as specified and as directed.

All as per item no 53.00 here-in-above but for 120 sqmm 3core

Supply, jointing and testing Cold Shrinkable cable jointing kit for 11 KV (Earthed) grade cable for straight through cold shrinkable type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable for size 95 sqmm complete all as specified and as directed.

All as per item no 55.00 here-in-above but for 120 sqmm 3core

S&F Battery bank consisting of 12 Nos battery of 2 volts 60 AH (maintenance free) including connecting the same in series with copper strip 25x3 mm including wiring work with 4 sqmm copper wire including battery charger 24 volts to charge the battery bank complete all as specified and as directed.

S & F steel tubular swaged pole complete with mild steel base plate, finial taper plug, bolts, nuts and screws, pole cap type 410 SP – 55 ( 11 metre long ) as per IS 2713-1980 including painting with two coats of aluminium paint over a coat of red oxide primer complete all as specified and as directed. (Note :- Excavation & Earth work, PCC shall be measured and paid separately.)

Supply,laying and testing PVC insulated cable,Armoured heavy duty electric cable with aluminium stranded conductor,1100 volts grade,cross-sectional area 120 Sqmm 3.5 core complete all as specified and as directed.

All as per item no 59.00 here-in-above but for 95sqmm 3.5core

Supply installation, commissioning and testing of LT panel, indoor type, floor mounted, weather vermin proof factory made, CPRI approved, facricated out of 3 mm thick mild steel sheet mounted, on frame of mild steel angel iron 40 mm x 40 mm x 6 mm, 45 cms above the ground level duly supported with mild steel angle iron 50 mm x 50 mm x 6 mm thick in PCC foundation (1:2:4), type B-I, using 20 mm graded crushed stone aggregate, LT panel shall be totally enclosed with front double door and rear opening with IP-54 protection as per IS/8623 duly powder coated for 433 volts, 3 phase, 4 wire having TPN Aluminium bus bars suitable for 1600 Amps load duly drilled holes for connections, RYB insulated with different colour code and sleeved insulators complete prewired and cable connection with copper conducter wire upto copper bus bars including all incoming and outgoing cable connection with suitable size of copper lugs/gland complete all as specified and directed by Engr-in-Charge and also comprissing of following :- Location : PH NO-1 INCOMING : (i) 800 amps 4 pole ACB, 50 KA breaking capacity with microprocessor release - 01 Nos (ii) Aluminium bus bar 3 phase 4 strip suitable for 1600 Amps current carrying capacity complete with post insulators and heat shrinkable sleeves.

OUTCOMING : (i) 300 Amps 4 pole, MCCB, 35 KA breaking capacity with thermal and magnetic adjustable setting - 01 Nos. (ii) 250 Amps 4 pole, MCCB, 25 KA breaking capacity with thermal and magnetic adjustable setting - 01 Nos. (iii) 160 Amps 4 pole, MCCB, 16 KA breaking capacity with thermal and magnetic adjustable setting - 01 Nos. (iv) 63 Amps 4 pole, MCCB, 16 KA breaking capacity with thermal and magnetic adjustable setting - 01 Nos. (v) RYB indication lamp - 01 No. (vi) Digital multifunction meter showing voltage, Ampere, PF, Frequency etc. (vii) Spare way of the 63 Amp 4 pole MCCB.

Supply installation, commissioning and testing of LT panel, indoor type, floor mounted, weather vermin proof factory made, CPRI approved, facricated out of 3 mm thick mild steel sheet mounted, on frame of mild steel angel iron 40 mm x 40 mm x 6 mm, 45 cms above the ground level duly supported with mild steel angle iron 50 mm x 50 mm x 6 mm thick in PCC foundation (1:2:4), type B-I, using 20 mm graded crushed stone aggregate, LT panel shall be totally enclosed with front double door and rear opening with IP-54 protection as per IS/8623 duly powder coated for 433 volts, 3 phase, 4 wire having TPN Aluminium bus bars suitable for 1600 Amps load duly drilled holes for connections, RYB insulated with different colour code and sleeved insulators complete prewired and cable connection with copper conducter wire upto copper bus bars including all incoming and outgoing cable connection with suitable size of copper lugs/gland complete all as specified and directed by Engr-in-Charge and also comprissing of following :- Location : PH NO-6 INCOMING : (i) 800 amps 4 pole ACB, 50 KA breaking capacity with microprocessor release - 01 Nos (ii) Aluminium bus bar 3 phase 4 strip suitable for 1600 Amps current carrying capacity complete with post insulators and heat shrinkable sleeves. OUTCOMING : (i) 250 Amps 4 pole, MCCB, 25 KA breaking capacity with thermal and magnetic adjustable setting - 02 Nos. (ii) 200 Amps 4 pole, MCCB, 25 KA breaking capacity with thermal and magnetic adjustable setting - 01 Nos. (iii) 63 Amps 4 pole, MCCB, 16 KA breaking capacity with thermal and magnetic adjustable setting - 01 Nos. (iv) RYB indication lamp - 01 No. (v) Digital multifunction meter showing voltage, Ampere, PF, Frequency etc. (vi) Spare way of the 63 Amp 4 pole MCCB.

Supply and fixing of rubber mat of size 1 mtr X 1 mtr and thickness 3 mm with EOP foam. Make : SINTEX, PRODUCT NO : GSCQ-1010-3/ EQUIALENT OTHER MAKES

S&F Danger Notice Plate of size 20x15Cm for LT, made of 1.6 mm thick Mild Steel Sheet, Vitreous Enamelled White, Letters, Figures and Conventional Skull & Bones in Signal Red Colour and fixed with Mild Steel clamps, Bolts & Nuts of appoved size complete all as specified and as directed.

S&F Danger Notice Plate of size 25x20Cm for HT, made of 1.6 mm thick Mild Steel Sheet, Vitreous Enamelled White, Letters, Figures and Conventional Skull & Bones in Signal Red Colour and fixed with Mild Steel clamps, Bolts & Nuts of appoved size complete all as specified and as directed.

S&F Off load change over switch (Pistol type handle) in sheet enclosure, 415V, 315 Amps rating, four pole,50 Hz complete all as specified and as directed. Make : Cat Part No OT315E03CP of make ABB or equivalent model of L & T/Siemens/Legrand

Supply & fixing of flood light 120 Watts LED smart bright essential light, complete with acrylic cover suitable for pole complete with all accessories, prewired including provision of house sercice bracket, made of 40 mm bore galvanised iron pipe, 1.20 mtr long galvanised iron pipe, light grade, bent at 1200 angle with two Nos of mild steel clamp flat iron 50 x 5 mm, suitable size nuts, bolts and washers including painting with two coats of aluminium paint over one coat of red oxide-primer, including making all necessary connection with suitable capacity flexible cable, complete all as specified and directed by Engr-in-Charge. Make : Cat part No LFLN-120-WW/60-M of Crompton or equivalent to Havells/Bajaj/Philips

Supply & fixing of LED street light 150 Watts skyline IP-66 made of PDC aluminium powder coated housing, complete with acrylic cover suitable for pole complete with all accessories, prewired including provision of house sercice bracket, made of 40 mm bore galvanised iron pipe, 1.20 mtr long galvanised iron pipe, light grade, bent at 1200 angle with two Nos of mild steel clamp flat iron 50 x 5 mm, suitable size nuts, bolts and washers including painting with two coats of aluminium paint over one coat of red oxide-primer, including making all necessary connection with suitable capacity flexible cable, complete all as specified and directed by Engr-in-Charge. Make : Cat part No LSTP-150-CDL-M of Crompton or equivalent to Havells/Bajaj/Philips

Supply, installation, Testing commissioning of power factor improvement (indoor) capacitor Bank having aggregate capacity : 275 KVAR (As per requirement) in 12 stage with micro processor alongwith factory made type panel weather proof, vermin proof front double door and rear opening, fully ventilated both side opening and fabricated out of MS CRC sheet 3 mm thick & frame angle of size 50 mm x 50 mm x 6 mm having bus bar of Aluminium 400 Amps cap, three phase and one neutral fixed on insulator and bus bar insulated by coloured heatshrinkable sleeve & housed in specified compartment both side openable. Including Powder coating internally externally the entire steel surfaces all the cover shall have with suitable locking arrangements, fully internally wired with suitable size of thimbles. Incoming / outgoing internal connection with PVC insulated PVC sheathed multistranded copper wire of suitable size all as directed. The Panel should be ISO 9001 CERTIFIED & CPRI Approved manufacture and also comprising following :- (i) Main incoming MCCB 400 Amp 35 KA. 3 pole - 1 No. (ii) Power factor corrector relay 14 Stage . (iii) Capacitor Duty Contactor 50 KVAR - 2 Nos (iv) Capacitor Duty Contactor 25 KVAR. - 4 Nos (v) Capacitor Duty Contactor 15 KVAR - 2 No

(xviii) Power Capacitor 10 KVAR dry tubular type having tolerance 0% - 10% with discharge device resistor. confirmed to IS 13340. - 3 Nos (xix) Power Capacitor 5 KVAR dry tubular type having tolerance 0% - 10% with discharge device resistor. confirmed to IS 13340. - 2 Nos (xx) Digital Voltmeter 0-500 V with VSS, NEUTRONICS - 1 Set (xxi) Digital Ammeter 0-400 Amp, with ASS & C T, NEUTRONICS - 1 Set (xxii) Protection Fuse 16 Amp, With HRC, - 3 Nos (xxiii) Capacitor 5 KVAR Fixed with Bus Bar with MCB 63 Amp, protection - 1 Set

Supply and fix LED Sign board made out of 3 mm thick MS sheet of size 0.9 x 2.5 mtr fixed on angle iron fame of suitable size and PCC foundation and written (PH-1, PH-6, PH-4, PH-5, PH-3, PH-AF, PH-266) both in English and Hindi as approved by GE complete all as specified and directed by Engr-in-Charge. (Note:Drowing shall be approved by GE) and PCC will be paid under seperate items)

Material and labour for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.00 mm thick burried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI strip 32x6 mm as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel, GI strip protected by 40 mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 cm c/c bothways and single handle of 10 mm dia round bar including necesary excavation, earth work etc. in soft/loose soil and disposal of soil to a distance n.exc. 50 m and necessary testing on completion al as shown in electrical plate Nop 3 MES Schedule Part - I complete all as specified and as directed.

Chemical Earthing ASEEL-39-ZC & AC(76.3 mm dia with back fill compound 2 bag BFC comnplete with zinc and alloy coated safe earthing elctrode with baron BFC burried directly in ground. (earth pit not less than 3 mtr deep below normal ground level) with top edge of plate not less than 2.5 mtr below ground level conneting to Aluminium earth strip of size 32x6 mm by means of bolts, check nuts and washers of stainless steel and protected of GI pipe light grade, 50 mm bore including provn of concretye pit in PCC (1:2:4) type B-1 using 20 mm graded crushed stone aggregates with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 KG/sqm) and frame of angle iron 25 x 25 x 3 mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI medium grade 20 mm bore pipe for watering perforated at bottom 2.5 mtr long placed on top edge plate, filling of earth pit with charcoal. salt, magnisium sulphate in alternate layers of 30 cm each and 15 cm round the earth plate upto 3 mtr depth of pit from bottom, remaining space of the pit to be filed with fresh soil, test point made out of phosphorous bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 mr, all as per electric plate No 3 of SSR 2009 Part - I and connection all as specified and testing on completion.

Earth Continuity conductor or main Earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other situation for loop earthing etc of size 25 mm x 4 mm galvanised earth strip all as specified and directed.

Earth Continuity conductor or main Earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other situation for loop earthing etc of size 32 mm x 6 mm galvanised earth strip all as specified and directed.

Supply and fix GI pipe 150 mm light grade galvanised with all fitting laid in trenches for protection of cable complete all as specified and as directed.

Boring of holes under road, pavement hard standing by trenchless technology using ultrasound technique and necessary machine including HDPE pipe (PE-180, SDR- 7.40 (20 Kgf/CM²)) of 200 mm dia complete all as specified and directed.

M&L Sand Cushioning (dry) in Trenches/Ducts for protection of UG Cables (below, above and around the UG Cable laid) of 23 Cm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after laying the Cable) and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. NOTE : For the purpose of Payment, Punned thickness of Sand Cushioning only will be Measured.

M & L for brick sub class 'B' 250mm x 125mm x 75mm and laid in trenches as in protection of UG cable complete all as specified and as directed.

Laying only old serviceable bricks obtained from taking out old unserviceable XLPE Cable complete all as specified and as directed.

Materials and Labour Cutting existing road / path etc for taking out cable and proction pipe and making good the disturbed surfaces with cement concrete type C2 (1:3:6, using 40 mm graded crushed stone aggregates) of suitable depth complete alas directed by the Engr-in-Charge. (Note : PCC will be paid under seperate items)

M&L Cement Concrete 1:2:4 type B1 (using 20mm graded stone aggregate) in Copping of Electric Poles, etc. including weathering slightly rounded or chamfered angle and throating, finishing all exposed faces of Concrete with necessary Formwork, complete all as specified and as directed.

Supply only Eelctric rubber hand gloves suitable for 11 KV complete all as specified and as directed.

Material & labour for GI pipe 80 mm bore "light grade" laid in trenches floors/on , pole/road for cable protection with all fittings complete all as specified and as directed.

Supply, laying, jointing and testing in trenches or passing through pipe, 11000 Volts grade XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured HT electric power under ground cable conforming to IS:7098 (Pt-I)-1988, heavy duty with aluminium conductor of cross sectional area 95 Sqmm 3 core with necessary fixing arrangements such as lungs, glands and terminal etc. complete all as specifieda as directed.

All as per item no 84.00 here-in-above but for 120sqmm 3 core

All as per item no 84.00 here-in-above but for 150sqmm 3 core

Supply, jointing and testing cable jointing kit heat shrinkable type for 11 KV XLPE insulated armoured heavy duty under ground cable for indoor termination suitable for aluminium conductor cable suitable for 3 Core, 150 Sqmm complete all as specified and as directed.

Supply and fix lightening arrestor suitable for HT 11 KV 10 KA station class complete all as specified and as directed.

TOTCO

RADHA ENTERPRISE