providing 7.50Hp Motor Pump room for Fodder Cultivation Unit at CR Colony in Kodaganallur Panchayat in Pappakudi Panchayat Union

Amount

Earth work excavation in all soils such as red earth ,hard stiff clay soil, stiff black cotton soil, hard redearth,shales, murrams, gravel,hard rock not requiring blasting ete complete.,

Cement concrete 1:4:8 mix usin 40 mm HBGS metal inculding cost and coveyance of all materials to site including labour for mixing , laying,curing etc complete.,

Random Rubble Masonary with simultanceous pointing in cement mortar 1:5 mix using good size of rough stones and 10% of bond stones inculding cost and conveyance of all materiales curing etc ,complete.

Filling in basement with excavated earth in layers of not more than 15 cm thick well rammed watered and consolidated complying with standard specifications etc., compelte.

Supplying and filling in foundation and basement with filling sand in layers not more than 15 cm thick well rammed, watered and compacted complete, complying with standard specification

Brick work with cement mortar 1:5 mix using country bricks of size 83/4"x41/4"x23/4" for foundation and basement and superstructure inculding cost and conveyance of all materiales curing etc ,complete. For foundation and basement

Supplying and erection centering for sides and soffits inculding necessary supports and structing for plain surfaces such as RCC Slab,Lintel,Beam coloum,sunshade etc complete.,

Supplying and fabrication,placing in position of mild steel or ribbed Tor steel grils for RCC works inculding cost of steel and binding wire etc.

R.Cement concrete 1:11/2:3 mix using 20 mmHBGS metal inculding cost and coveyance of all materials to site including labour for mixing ,laying,curing etc complete.,

Granaolithic floor finish of 25 mm thick in PCC 1:2:4 using 10-12 mmHBGS Jelly inculding curing ete.complete.,

Plastering with Cement Mortar 1:3, 10mm thick including cost and conveyance of all materials to site and labour charges etc., complete.

Plastering with Cement Mortar 1:5, 12mm thick including cost and conveyance of all materials to site and labour charges etc., complete.

Painting two coats with ready mixed Plastic emulsion of first class quality paint and of approved colour over a priming coat ,inculding through scrapping, clean removal of dirt etc. complete and inculding necessary plasterof paris , putty whereever re

Painting two coats of new iron works such as steel doors, windows, ventilators bars, Balustrades etc., with best approved first quality of synthetic enamel paint of approved colour over the existing priming coat etc., complete complying with standard spec

Supply ofSteel Doors of Siz e 0.90 X 2.00M 1 Nos.

Supply ofSteel Ventilator of Siz e 0.60 X 0.45M 2 Nos.

Electrification(Sub estimate)

Wiringwith2x1.5sq.mm.(22/0.3)PVCinsulatedSCunsheathedcopperconductorof1100VgradeinsuitablePVCrigidpipeonwallandceilingwithPVCaccessoriesandwithTWswitchboxand5AFTswitchwithpainting of suitable colour for open PVC light point / fan point (for electronic regulator) (5 points per coil)

Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit.SD-125

Supply and fixing of 16 Amps DP Switch of 500 V with matal clad with fuse and neutral (Side Handle) on suitable TW Board with earth connection only.SD-142

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains SD 65

Supply and fixing of 25mm dia GI Pipe including cost and conveyance all labour charges etc complete.SD70

Pipe line (Subestimate)

Supply and Delivery of 50mm Gi pipe Pipe including all charges

Laying of PVC rigid pipes with lead of 200m lowering into trench, laying in proper grade, alignment, jointing PVC coupler with specials and tested to the required pressure including conveyance of water upto 1km lead during the testing.

Supply and fixing of 7.5Hp Motor 30x100Lpm including all coat and conveyance of all charges

Supply and fixing of 7.5Hp Panel Board including all cost and Conveyanceof all charges

J Justin Ambrose (BID ID -1216913)