SPECIAL REPAIRS TO BLDG NO. AL-118 (OR MARRIED ACCN ) OF 4 ASSAM AT DAGSHAI CANTT UNDER GE KASAULI

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm but n.exe 4.0 Sqm each complete all as specified.

Taking down shutter of any description exc 1 Sq.m but n.exc 2.0 Sqm each complete all as specified.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified.

Taking down cement plaster on brick or stone wall, ceilling etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc. complete all as specified.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar etc. Complete all as specified.

Cutting holes n.exc half brick wall thick in brick wall built in cement mortar or lime mortar for inserting hold fast & making good disturbed surface in CM (1:3) or as required complete all as specified.

Soild PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS squarw tube as specification and drawing complete all as specified.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain PVC sheets for top rail lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement, fixing in the frame at site as per specification and drawings complete all as specified.

Pressed steel frame of size 125x60mm, 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, all as specified.

Pressed steel frame of size 105x60mm, 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, all as specified.

35 mm thick second class hard wood factory made plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified .

35mm thick second class hard wood factory made glazed and skelton shutter open rebated and prepared to receive glass ,gauge etc ( without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in MES Schedule Part-I, section 8 clause 8.20(a), supplied and fitted to chowkats complete all as specified.

Mild steel cupboard shutter with frame Godrej pattern, made out of 22 gauge mild steel sheet including chromium plated MS handle with proper locking arrangement (brass mortice lock vertical type, size 65mm, 4 levers with escutcheon pushes and two keys), two coats of spray painting with synthetic enamel paint of approved tint over a coat of red oxide primer and fixing with 6 Nos 12mm dia bolt 150mm long grouted in brick wall/concrete including making good the disturbed surface to match with the adjoining surface complete all as specified.

Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm dia and fixed with tinned tacks or galvanised mild steel staples complete all as specified.

Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm dia and fixed in repair with tinned tacks or galvanised mild steel staples complete all as specified.

100 mm long cold rolled mild steel medium weight butt hinges complete all as specified.

100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised type B-21 complete all as specified.

50mm long cold rolled mild steel medium weight butt hinges complete all as specified.

Small fitting such as bracket of any type latch hinge blocks shaped door and window stops and the like including all necessary labours aticles n.ex 200 cu.cm each complete all as specified.

Mild steel work as in hold fast and similar articles conforming to Fe-290 Gde-165 complete all as specified.

PCC 1:3:6 type C-I (using 20mm graded stone aggregate) as in bed block and filling of chowkats complete all as specified.

Aluminium anodized 200 mm long barrel tower bolt of extruded section complete all as specified.

150mm long aluminium anodized handles fabricated type complete all as specified.

300 mm long mild steel sliding door bolt stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolt and nuts four on bolt plate and two on staple plate etc complete all as specified.

Mild Steel 300mm long ordinary rat tail rod patttern springs including roller & roller plate complete all as specified.

150mm long mild steel tower bolt stove enamelled black complete all as specified.

125 mm long mild steel pressed handles oval type stove enamelled black complete all as specified.

Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, with glazing bars, dovetailed or welded fixed in repair complete all as specified.

Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded fixed in repairs complete all as specified.

Steel ventilators with top hung shuttters including projecting type hinges steel peg stay fixed in repair complete all as specified.

Figured glass 3 mm thick pin headed type glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified.

Plain sheet glass 3mm thick ordinary quality & glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified..

Plain sheet glass 3mm thick ordinary quality glazing with oil putty in square n,exc 0.50 sqm in each pane including hacking out old broken glass ( any thickness, size, quality or description, not otherwise described ) from metal frame including punching or drilling out old glazing pin/spring clips complete all as specified.

Powder coated curtain rod dia 25 mm decorative pattern with bracket stops & roller fixed in repair complete all as specified.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified.

Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified

Rendering 5 mm thick in CM 1:3 on concrete surfae as in ceilling finished even and smooth complete all as specified.

Joint free non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. laid over and including 15 mm thick screed bed in cement mortar 1:6 set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified.

Non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm as in floors laid over and including screed bed or beddding layer of CM 1:6, 15 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified.

Glazed ceramic coloured tiles, (300x450)x 8 to 9mm thick as in vertical surfaces like dado or skirting over and including 10mm thick in CM 1:4 set & joined in neat cement slurry and pointed in coloured cement to match complete all as specified.

Machine cut kota stone flooring 550 x 550 mm, 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing ( mirror finish) laid over and including 20mm thick screed bed in CM ( 1:6) complete all as specified.

Machine cut kota stone slab 18-20mm thick as in skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing ( mirror finish) laid over and including 10 mm thick rendering in CM ( 1:4) complete all as specified.

16 to 18mm thick black polished granite (of any type) slab as in flooring, platform etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of granite stone including cutting, grinding and polishing (mirror polish i.e. full granite polish as per local trade practice) over & including 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified.

50 mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection finished even and smooth without usisng extra cement complete all as specified.

Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm, bowl size 410mm x 330mm x 160mm fixed in repair complete all as specified.

Stainless steel plate rack of size 24"x36"x10" with shelves,hooks and railing to keep plates vertically and horizontally,including necessary fixing arrangement.etc fixed in repair complete all as specified.

Stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for union 15mm dia and fixed in repair complete all as specified.

Stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for union 20 mm dia and fixed in repair complete all as specified.

Bib taps cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed down for iron pipe or for brass ferrule 15 mm dia fixed in repair complete all as specified.

Wash basin vitreous china white flat back of size 550x400mm including cutting for and pinning in ends of bracket including low density polythene waste pipe 32 mm fixed in repair complete all as specified.

Brass chromium plated pillar tap cast copper alloy , with capstan heads, chromium plated, screwed down high pressure , with or without lettered etc fixed in repair complete all as specified.

Chromium plated shower rose with or without swivel joints 125 mm dia including fixing to steel pipe or unions mixing valve including three joints to steel pipes or union and plugging and screwing to walls fixed in repairs complete all as specified.

Vitreous china squatting pan orissa patern size 580x440 mm white with integral foot rest fixed in repair complete all as specified.

PVC valveless syphonic action type flusing cistern 10 litres capacity low level white with inlet ball valve float and handle including bracket fixed in repair complete all as specified.

PVC connection pipe 15mm bore 450 mm long with PTMTnuts fixed in repair complete all as specified.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store 15 mm bore complete all as specified.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store 20 mm bore complete all as specified.

15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs complete all as specified.

All as per item No.60 above but fixing only

20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs compete all as specified.

All as per item No.62 above but fixing only

Brass chromium plated towel rail 600mm long fixed with chromium plated brass screws and wooden/plastic cleats fixed in repairs complete all as specified.

Rotational moulded polythene water storage tanks 500 litres capacity (cylindrical or vertical with closed top) three layered hoisted & fixed in position complete all as specifed.

Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed ( Minimum weight 20mm-210gm) 15mm bore fixed in repair complete all as specified.

PTMT grating doom 125mm dia with waste hole (Minimum weight 40gm) fixed in repair complete all as specified.

100mm dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 fixed in repair complete all as specified.

Preparing new plastered surfaces of ceiling and applying three coats of white wash complete all as specified.

Preparing old plastered surfaces of ceiling and applying one coat of white wash complete all as specified.

Preparing old plastered surfaces of wall and applying one coat of white wash complete all as specified.

Preparation of new plastered surface of walls applying two coats of cement base paint complete all as specified.

Complete removal of existing treatment of wall surfaces and applying two coats of cement base paint complete all as specified.

Preparation of newly plasterd surfaces of walls and applying two coats of oil emulsion distemper over 1 mm thick white cement based wall care putty complete all as specified.

Complete removal of existing treatment of walls and applying two coats of oil emulsion distemper over 1 mm thick white cement based wall care putty complete all as specified.

Preparation of new steel surfaces over 10 cm width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of zinc chrome primer.

Preparing new or previously untreated steel surfaces of any descrption over 10cm width or girth not otherwise described and applying two coats of synthettic enamel paint complete all as specified.

Preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

Preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified.

Preparation of old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete as specified.

Dismantling wall and ceiling board (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified.

GI metal suspended ceiling system, GI lay in plain of 600x600x0.5mm (TEGULAR) edge tiles in globel white colour to be laid on strong 24mm Tee section flanges colour white having roatary stiching on the main runner with web height of 38mm complete all as specified and directed Note- (i) To comprise main runner spaced at 1200mm centres securely fixed to the structural soffits at 1200mm maximum centre. The first/last suspension system at the end of each main runner shall not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200mmx600mm module. Cut cross tees longer than 600mm required independent support. 600mmx600mm module to be formed by fittings 600mm long flush fitting cross tees centrally between the 1200mm cross tees. Perimeter trime to be wall angles of size 3000mm x 19mm x 19mm secured to walls at 450mm maximum centres. (ii) The HCL sleeve anchor fastener of thread size 6.50mm x 25/5 with soffits cleat made of galvanised steel of size 27x37x25x1.6mm and level clip in dimensions of 85x30x0.8mm with 4mm GI wire complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified.

20mm thick second class hard wood boarding, planed one side with butt joints, fixed with nails in any situation (except flooring and skirting) complete all as specified.

Demolition of cement concrete in sunken portion of floor complete all as specified.

12 mm thick rendering in CM 1:4 on faces of sunken portion complete all as specified.

Lime concrete 1:2 (using 40 mm graded brick aggregate) as in sunken portion complete all as specified.

Supply only water proofing compound.

Demolition of PCC in ground floors & paving n.exc 15cm thickness ( below or above ground level) unreinforced complete all as specified.

PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping , bed plates kerbs finished even and smooth without using extra cement complete all as specied.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified.

Mild steel rolled as in joist, angle, channel as in purlins, rafters cleats etc conforming to Fe-410W complete all as specified.

75mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base of floor complete all as specified.

Demolition of brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified.

Brick work with sub class ‘B’ old size bricks, straight or curved on plan exc 6.0 m mean radius in cement mortar 1:6, complete all as specified.

Excavation in trenches n. exc 1.5m wide and n exc1.50 m deep and getting out in hard/dense soil complete all as specified.

Returning filling in and including spreading, leveling and well ramming in layers n.exc 25 cm thick complete all as specified.

Removing excavated soil to a distance n.exc 50 m and depositing where diretected at a level n.exc 1.5 m above the starting point complete all as specified.

Demolition and breaking up 150mm dia salt glazed stone ware/AC/RCC drain pipes jointed in cement mortar and taking out of trenches removing the debries from site complete all as specified.

PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in the drain pipe including packing under & haunching against the side of pipe after they are laid and tested for 150mm dia compelete all as specified.

150 mm bore salt glazed stone ware drain pipe laid in trenches and jointed complete all as specified.

Cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in cills, steps, seismic and other similar works plinth course,coping benching, bed plate etc complete all as specified.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified.

Precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in landing cover slab for manholes , septic tank set in cement mortor ( 1:6) including necessary form work complete all as specified. Note: Reinforcement shall be measured and paid for separately under relevant item.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including crancking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.5mm dia or securing with clips complete all as specified.

Cutting in to existing manholes for connecting drain pipes making good to pipe and rendering cutting out existing benches for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for 150 mm internal bore pipe complete all as specified.

110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors i repair complete all as specified.

110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in repair to walls complete all as specified.

75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors in repair complete all as specified.

75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in repair to walls complete all as specified.

PVC (SWR) bend 110 mm bore complete all as specified.

PVC (SWR) bend 110mm bore with access door complete all as specified.

PVC (SWR) junction single(Single T) equal or unequal 110mm bore with access door complete all as specified.

PVC (SWR) vent cowl110mm bore complete all as specified.

PVC (SWR) bend 75mm bore complete all as specified.

PVC (SWR) bend 75mm bore with access door complete all as specified.

PVC (SWR) junction single (Single T) equal or unequal 75 mm bore with access door complete all as specified.

PVC (SWR) vent cowl 75 mm bore complete all as specified.

Mild steel framed work such as grills, gratings, etc.with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 fixed in repair complete all as specified.

Welded steel wire fabric to wood or steel members not exceeding 4 Kg per sqm fixed in repair complete all as specified.

Mild steel work as in stairs (framed) including stringers, treads, landing, balusters, hand rails etc., including cleats, brackets, etc , conforming to Fe-410-W(Gde-E-250) fixed in repair complete all as specified.

Taking down carefully to existing copper/Aluminum point wiring any type/size/make including fittings & fixtures such as switches, ceiling roses, pendents, sockets, boxes, light fitting, bell, switches board, MCBs/ DBs etc and removing from site and making good disturbed surfaces of walls, floors etc complete all as specified.

Concealed point wiring using approved colour coding as per IS with unsheathed PVC insulated multi stranded copper conductor single core 1.5 Sqmm FRLSH in heavy duty non metallic rigid PVC concealed conduit and its fittings, ISI marked, with sunken box 1.5 mm steel sheet including 3mm thick plastic laminated sheet properly cut for fixing switches and sockets etc, including PVC insulated and unsheathed stranded copper conductor single core of size 1.5 sqmm FRLSH as earth continuity conducotor to common earth and connecting to earth dolly for the following complete all as specified:-

One light / Fan / Bell point controlled by one way switch 6 Amp.

One 3 pin socket outlet 5 Amps on the same board with other switches

One 3 pin 5 Amp socket out let controlled by one switch on independent board

Point wiring with PVC insulated and unsheathed multistranded FRLSH single core 4.0 Sqmm (nominal area) copper conductor cable using approved colour code as per IS drawn in and including heavy duty non metallic rigid PVC concealed conduit and its fittings, ISI marked with all accessories including sunk cast pressed steel terminal boxe of size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing 3 mm thick plastic laminated bakelite sheet top cover alongwith copper earth wire PVC insulated & unsheathed multistranded (FRLSH) copper conductor cable of size 4.0 Sqmm as continous earth wire connected to common earth and earth dolly for one 15 amps switch independent complete all as specified.

Switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified.

Switch piano flush type (ISI marked), single pole, one way 15 Amps, 240 Volts complete all as specified.

Socket outlet 2 in 1, 3 pin, 5 Amp piano flush type complete all as specified.

Socket outlet, 2 in 1, 3 pin 16/15 Amp, piano flush type complete all as specified.

Lamp holder PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified.

Ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified.

Bell push piano type one way 5/6 Amp, 240 volt complete all as specified.

Bell electric AC 240 volt, 50 HZ complete all as specified.

LED tube light fitting, 18 watt, CDL, 230 Volts, 4 feet long , including LED lamp and mounting casing box (2 Nos) complete with all accssories internally pre wired including connecting up to ceiling rose with 0.5 sqmm twin core copper flexible conductor cable complete all as specified. Make: Polycab Product code LD00103025 or its equivalent in the makes mentioned in Appendix 'B'

Surface mounted LED bulk head 10W luminaire with ABS body & polycarbonate diffuser including lamp complete all as per specified. Make: Polycab Product code PLT0101316 or its equivalent in the makes mentioned in Appendix 'B'

LED lamp 12 watt, CDL, B-22 cap, (Pin type), 230V, PF not less than 0.9 (min) complete all as specified. Make: Polycab Product code LLP0101404 or its equivalent in the makes mentioned in Appendix 'B'

Building security LED light 20 Watt energy saving LED street light with PDC aluminium body and toughened glass visor fitted in frame secondary optical lens for superior light distribution fixed in repair complete all as specified. Make: Polycab Product code PUB0506022 or its equivalent in the makes mentioned in Appendix 'B'. (Note for item No 136 to 139) : (a) Make of fitting and driver shall be same. (b) Power factor shall be 0.95 and above.

Building security light bracket made out of galvanised steel light grade pipe of 40 mm bore 1500 mm long bend to an angle of 120 degree, 02 Nos clamps made out of 50mm x 5mm flat iron, 06 sets of nuts, bolts and washers, painting two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Exhaust fan 300mm sweep metal body heavy duty 1400 RPM with air delivery 1050 CMH fixed in repair complete all as specified. Make : Polycab Cat Fresher ES Metal or its equivalent in the makes mentioned in Appendix 'B'

MCB, single pole 'B' series having braking capacity 10 KA, 6 to 32 Amp, 240 volts, complete all as specified.

MCB SPN having braking capacity 10 KA 35-60 Amp, 240 Volt 'C' Curve complete all as specified.

Sheet metal enclosure with double door for DBs conforming to IS:8623.III, IP:43 protection, shrouded neutral link & earth bar and cement spill protector, SPN 8 way, 240 Volt complete all as specified.

Vertical TPN MCB distribution board,415 Volts, 6 way with 100 Amps 25 KA MCCB as incomer, phosphatised powder coated, double door, translusent type, neutral link and earth bar, dust protected, inclusive of 100 amp tinned busbar, din rail for mounting of MCBs, loose wire enclosure, detachable gland plate and inter connection between incomer MCCB and busbar, duly prewired, IP-43 protection and suitably fixing on wall using nuts and bolts grouted in PCC and inclusive of MCB SPN 40 Amp - 05 nos & blanking plate as required complete all as specified.

Concealed submain wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH copper conductor cable of size 6.0 sqmm (Nominal area) drawn through and including non metallic rigid PVC conduit of suitable size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH copper conductor cable of size 6.0 sqmm as earth lead and connected to earth dolly and making good disturbed surfaces complete all as specified. NOTE: (a) Three runs of cable 6 sq mm cable and one run of PVC conduit shall be measured as one length.

Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit nbot less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below notmal ground level, connected to galvanised earth lead wire 4.0mm dia by means of suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including light grade GI watering pipe 20mm bore with funnel wire mesh and medium grade GI wire protection pipe 15mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point including taking out existing unsv earthing complete ass as specified and testing on completion complete all as specified. Note:- The unit rate quoted shall include the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 20 mm GI pipe (light grade) for watering 20mm GI protection pipe (light grade) funnel wire mesh PCC chamber in PCC 1:2:4 type B-1, cast iron frame and 40mm thick RCC cover for pit etc.

MCCB 100 Amp, 3 pole, 415 Volt, 16 KA suitable for vertical TPN DB as incomer complete all as specified.

Vishal Builder

RAJESH BUILDERS

Babu Ram Sud and Sons