REPAIR REPLACEMENT OF JOINERY STEEL WINDOW VENTILATOR WIREGAUGE IRON PIPE PLASTERING AND OTHER CONNECTED ITEMS IN AGV AT AFS CHAKERI KANPUR

Amount

S and F 30 mm thick fiber glass reinforced plastic (FRP) door frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame, complete all as specified and directed.

S and F 30 mm thick fiberglass reinforced plastic (FRP) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminated all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of FRP laminated conforming to table 3 of IS: 14856 complete all as specified and directed.

S & F 100 mm size butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.

S & F aluminium, anodised barrel tower bolt of extruded section of 150mm long complete all as specified and directed.

S & F aluminium handles extruded type ,anodised of 125 mm size complete all as specified and directed.

Taking down cement plaster or cement lime plaster of any description on bricks or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed .

M&L for 10 mm thick plaster in CM (1:6) finished even & smooth without using extra cement and applying two coats of OBD over and including 1.0 mm thick (average) wall care putty complete all as specified and directed.

Easing of door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed.

Easing of window shutters, kitchen cupboard shutters, show case shutter drawers including fixing of screws adjusting handles, knobs tightening piano hinges including misc small adjustments complete all as specified and directed

S & F in repair 75mm long double legged door stopper of aluminium alloy with rubber gasket complete all as specified and directed .

S & F in repair aluminium anodized hasp & staple safety type with mild steel hinge pin including bolt to hinge plate fixed with screws of 100mm length complete all as specified and directed

S & F in repair galvanised mild steel wire cloth of size 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as speficied & directed.

S & F stainless steel wire cloth of size 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with stainless steel wire staples complete all as speficied and directed.

Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed complete all as specified and directed

S & F 3.5 mm thick sheet glass ordinary quality and galzing with oil putty or wooden beads in squares of any size complete all as specified and directed

S & F in repair 25 mm thick drapary curtain rods with bracket and fancy type knob at both end of curtain rod cut to length as required complete all as specified and directed

Dismantling mild steel Work of any description fixed in any position not otherwise provided for complete all as specified and directed.

M & L for framed MS work as in steel doors or gates of angle or other section incl gusset plates ,rails, bracket,ms plate, sheet etc complete drilled for fixing of steel sheeting or other covering etc and simillars works conforming to Fe 250 complete all as specified and directed.

Taking down chowket or frame not exceeding 1.50 sqm with shutters (wihtout taking of shutter from frame ) etc complete all as specified and directed.

Ditto all as per item No. 20 above but exceeding 1.50 Sqm but not exceeding 4.00 Sqm

Taking down shutter exceeding 1.0 Sqm and not exceeding 2.0 Sqm complete all as specified & directed.

M & L for Second class hardwood plain solid straight chowkats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

M & L for 35 mm thick factory made second class hardwood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc with sash bar any number fitted with cut and mitered beads for securing glass gauze etc , sizes of members of shutters as specified in SSR Part I section 8, Section 8.24(a) and fitted to chowkats complete all as specified and directed.

S & F 30 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete, all as specified and directed.

Ditto all as per item No.25 above but for 20 mm thick.

S&F 100 mm size but hinges medium weight cold rolled mild steel complete all as spd & directed.

S & F in repair 100 mm size but hinges medium weight cold rolled mild steel complete all as spd & directed.

S & F in mild steel helical door spring of size 150 mm ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed.

S & F in repair mild steel helical door spring of size 150 mm ordinary rat tail type including roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed.

S & F 250mm long, mild steel sliding door bolt stove enameled black with bright bolt not less than 12 mm dia with and including a minimum 6 bolts and nuts, (four on bolt plate and two on staple plate) complete all as specified and directed.

S & F in repair mild steel sliding door bolts plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts (four on bolt plate and two on staple plate) length of bolt 250mm complete all as specified and directed

S & F 150 mm long mild steel barel tower bolt stove enamelled black with bright bolt complete all as specified and directed.

S & F in repair 150 mm long mild steel barel tower bolt stove enamelled black with bright bolt complete all as specified and directed.

S & F 125 mm MS pressed handle oval type stove enamelled black complete all as specified and directed.

S & F in repair 125 mm MS pressed handle oval type stove enamelled black complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of newly wooden surfaces of any description exceeding 10cm width or girth complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description exc. 10cm width or girth complete all as specified and directed.

Taking down steel chowkhat or frame with shutters (wihtout taking of shutter from frame ) of any description etc complete all as specified and directed.

S & F Steel window with side hung shutters incls box type hinges with steel handle and steel peg stay complete with or without glazing bars dovetailed or welded including one shop coat with zinc chrome primer complete all as specified and directed.

S & F steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and directed.

M & L for MS work such as grills, grating etc with end of bars shouldered and/ or reveted or forged in to spikes framed guard bars barred iron doors ; ladders; framed balusters, walk ways railing, framework of water tanks and simillars works conforming to Fe- 410 Gde-310 complete all as specified and directed.

M & L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in bed block for fixing of angle iron post, hold fast and the similer work complete all as specified and directed

Taking down easing and adjusting wooden shutters of any description not exceeding 1 sqm each and refixing in same opening complete all as specified and directed.

Ditto all as per items 44 above but exceeding 1.0 sqm and not exceeding 2.0 sqm each and refixing in the same opening.

S & F rubber beading 75mm wide fixed with nail/screw, complete all as specified and directed.

S & F in repair 100 mm size butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified & directed.

S & F in repair aluminium, anodised barrel tower bolt of extruded section of 150 mm long complete all as specified

S & F in repair aluminium handles extruded type ,anodised of 125 mm size complete all as specified and directed.

BVV ENTERPRISES