WBPWD/AE/BMCESD/NIeT-10/25-26 (2nd Call)

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. i) 6 Way (D11/14)

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection,on angle iron frame on wall& mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Make- Schneider/Legrand/Siemens/L&T) (D9/13)

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. (Make-Schneider/Legrand/Seimens/L&T) (D-5/ 6)

I ) 63 A FP Isolator

ii) 40 A DP Isolator.

Supplying and fixing 240/415 V SP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. (Make-Schneider/ Legrand/ABB/Cabtree). (D6/7)

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Make- Havells / Polycab / RR Kabel / Gloster / KEI) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. (E14/1a)

i) 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

ii) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

iii) 2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC

iv) 3 x 84/0.3 (10 sqmm) + 2 x 56/0.3 (6 sqmm) ECC

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. (F5/9)

i) 2.5 sq mm

ii) 4 sq mm

iii) 6 sq mm

iv ) 10 sqmm

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Make- Havells / Polycab / RR Kabel / Gloster / KEI) in20mmsizePVCrigidconduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated &unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MSCRC sheet metal (16SWG) switch board cum JBon wall complete with 2no.suitable size“Ph&N”copper bar incl. bakelite/Perspex (wall matching color) topcover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish. (E15/2c)

i) Average run 8 mtr.

ii) On board

Supply & delivery TMC 502 P 2xT-LED 22W P3242, 250 volt. 4 ft. long Double Tube Light fittings complete with all accessories. (Make: Philips/Crompton/Wipro/Bajaj)

Supply & delivery TMC 502 P 1xT-LED 22W P3242, 250 volt. 4 ft. long Single Tube Light fittings complete with all accessories. (Make: Philips/Crompton/Wipro/Bajaj)

S&D LED type tube light 20 Watt Polycarbonate Body with inbuilt driver and Metal Heat Sink having length 1200mm, T8, Iumen Output - Min. 2100 Lumen (Make: Philips / Crompton /Orient / Bajaj/ Wipro). [03(Three) years on-site Warranty Certificate is to be provided from the Manufacturer].

Supply & Delivery of 48" (1200 mm) ceiling Fan as per IS 374:1979 complete with all accessories including P2 type capacitor and with safety wires for secondary suspension of fans complete with blades,canopy,fork,rubber bush etc.(Make:Usha Striker / Orient / Crompton Greaves).

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. (C2/17)

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. (C3/21a)

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/ perspex top cover by screw incl. making necy. connections etc (E-6/18b)

S&D 30 cm (12") 1420 rpm sweep A.C single phase heavy duty exhaust fan complete set ready to use.(Make : E.P.C)

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mmdia x 62 mm long). (D14/32b)

A. For GI

i) 30 cm Exhaust fan (12")

Fixing only exhaust fan on iron structure wall by welding. S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length (C4/28)

i) for 30 cm Exhaust fan(12").

Supply & Fixing 240 V, 2 nos. 6A, plug socket with separate 2 nos. 6 A Piano key type switch, indicator & 16A switch type SP MCB (Make: Anchor) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Make: Anchor) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required (E7/26)

ADD 18% G.S.T

ADD 1% L.W.C

Please Enable Macros to View BoQ information