REPAIR / CLEANING OF SEWAGE LINES, MANHOLES, SEPTIC TANKS, PATHWAY, DRAIN AND CERTAIN MISC B/R WORKS AT TRG BN-I, CIW, SPORTS COY AND HRDC IN BEG AND CENTRE UNDER AGE B/R-II IN GE (CENTRAL) KHADKI.

Amount

NOTE FOR PLUMBING AND SANITARY ITEMS:- (i) Contractor shall deposit entire quantity of plumbing and sanitary wares materials required / covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis. (iii) make specified in BOQ will supersede to all.

Demolition and breaking up drain pipes (salt glazed ware / AC / RCC) drain pipes of 150mm dia set in cement mortar complete all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed ware / AC / RCC) drain pipes of 200mm dia set in cement mortar complete all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed ware / AC / RCC) drain pipes of 300mm dia set in cement mortar complete all as specified and as directed.

Cleaning of existing septic tank of 500 users capacity by using Mechanical Pumping Machine to removing water, sludge, stones, solid particles etc complete from the septic tank at any location and at distance from road and removing the same from the campus and buried complete all as specified and as directed as below: (i) The sludge/burried soil etc taken out shall be stacked alongwith the septic tank, sump well etc. After 48 hours of the sludge taken out, measurement shall be taken as of the solid contents for the purpose of payment. The tenderer are advised to keep this aspect in mind while quotating the rates. After taking the measurements, the solid contents shall be disposed off outside the MD land/area. (ii) Necessary precautions as well as safety measures shall be taken by the contractor without any extra cost, for working in the foul conditions. (iii) The contractor shall be entirely responsible for the lapse, mishappening to any of the manpower deployed and/or to other equipment/machinary/material at the site of work during the execution. (iv) For cleaning the sewere line/manholes also refer relevant clauses of particular specifications here-in-after.

Description all as specified in item No 04 above but septic tank for 1000 users.

Description all as specified in item No 04 above but filter bed for 500 users.

Description all as specified in item No 04 above but Septic tank for 100 users.

Excavating in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth for foundation etc or for manholes, laying pipes etc and getting out in hard / dense soil complete all as specified and as directed.

Returning, filling in hard / dense soil spreading, levelling, watering and well ramming in layers n. exc. 25 cm. complete all as specified and as directed.

Removing excavated soil n. exc. 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and as directed.

Material and labour for cement concrete 1:4:8 type D-2 using 40 mm graded coarse aggregate in bed to drain pipes of 150 mm bore including forming cradles complete all as specified and as directed.

Material and labour for cement concrete 1:4:8 type D-2 using 40 mm graded coarse aggregate in bed to drain pipes of 200 mm bore including forming cradles complete all as specified and as directed.

Material and labour for cement concrete 1:4:8 type D-2 using 40 mm graded coarse aggregate in bed to drain pipes of 300 mm bore including forming cradles complete all as specified and as directed.

Material and labour for reinforced concrete pipes, 150 mm bore, Class NP-2, laid and jointed with collars complete all as specified and as directed.

Material and labour for reinforced concrete pipes, 200 mm bore, Class NP-2, laid and jointed with collars complete all as specified and as directed.

Material and labour for reinforced concrete pipes, 300 mm bore, Class NP-2, laid and jointed with collars complete all as specified and as directed.

Demolition of precast concrete block walling built in cement mortar as in manhole including PCC coping complete all as specified and as directed.

Material and labour for precast cement concrete block massonry with solid block exceeding 10cm in width and setting in CM (1:6) precast cement concrete (1:3:6) type C1 using 20mm graded stone aggregate complete all as specified and as directed.

Description all as per Item No 18 above except blocks complete all as specified and as directed.

Material and labour cement concrete (1:4:8) type D - 2 using 40 mm graded coarse aggregate in foundations filling & mass concrete complete all as specified and as directed.

Material and labour for PCC 1:2:4 Type B-1 using 20 mm graded coarse aggregate as in surface channels as in drains etc complete all as specified and as directed.

Material and labour for PCC 1:2:4 Type B-1 using 20 mm graded coarse aggregate in coping including necessary formwork and benching in bottom of manholes drain etc complete all as specified and directed.

Material and labour for rendering 15 mm thick in cement mortar (1:4) on concrete block masonry surfaces mixed with water proofing compound as per manufacturer's instructions, finished even and smooth without using extra cement complete all as specified and as directed. NOTE :- Waterproofing compound will be measured and paid separately.

Supply only integral water proofing compound.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

Description all as per item No 25 above but for 57 cms inner girth of drain/ channel complete all as specified and directed.

Demolition of reinforced cement concrete manhole covers n. exc. 15cm thickness below or above ground level complete all as specified and directed.

Material and labour for precast cement concrete 1:2:4 type B-1 (using 20 mm graded coarse aggregate) in cover slab set in CM 1:6 complete all as specified and directed.

Material and labour for mild steel TMT bars 6 mm to 8 mm dia, cut to length, bend to shape required, including cranking, bending and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

Material and labour for day to day cleaning of chocked up sewage lines and manholes, gully traps, floor traps, WCs or waste pipes by rodding or by any means. Also taking out sludges, mud, sand, ashes, fibre, silt, grease, roots, vegetation etc or any foreign materials appeared in manhole & sewage line of any dia due to daily uses and causing closing or chocking. Day-to-day complaints of chocked up manholes, sewage lines etc. Pertaining to TB-I,CIW,HRDC, OTM Accn and MD Accn, Sports Company pertaining TB I area are to be received daily from the complaint cell situated in the premises of office of the AGE B/R-II (C) Kirkee and entire complaints are to be attended for cleaning on the same day. Minimum number of labours with specialised experience will not be less than 02 Nos safaiwala from 0830 hrs to 1700 hrs, even on Sunday and holidays to attend emergency complaints. No extra payment shall be admitted for working on Sundays/holidays. NOTE :- (i) The payment towards the subject items shall only be made as per the total number of days, contractor had cleaned and cleared the blockages of sewage line excluding Sundays and holidays. (ii) In case urgent nature of complaints, contractor has to attend the complaints even on Sundays and holidays but payment towards this item shall be excluding Sundays and holidays. (iii) Contractor shall maintain a register including details of day of cleaning of sewage line, duly signed by contractor and Engineer-in-Charge. (iv) If the contractor will not able to provide the man power, the recovery of Rs. 711/- per person per day will be deducted.

Demolition or dismantling of precast interlocking tiles/ paver blocks/ Chequered tiles of any description thickness and size complete all as specified

Material and labour for sand filling under floors or foundations including watering and consolidation complete all as specified and as directed.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed (below or above GL) complete all as specified and as directed.

Material and labour for 75 mm thick PCC 1:4:8 type D2 in sub base complete all as specified and as directed.

Material and labour for providing 60 mm thick machine pressed precast concrete interlocking paver blocks of any shape and size conforming to IS-15658-2006,with grey cement and pigment, rubber moulded tiles M-35 Grade as in floors paving path etc. complete laid over sand cushioning complete all as specified and as directed.

Material and labour Chequered cement concrete tiles rubber moulded 30cm X30cm X 25mm thick set, jointed and pointed in near cement slurry in floors, with grey cement and pigments over and including 15 mm thick screed bedding in CM 1:6 complete all as specified and directed.

Material and labour 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate laid in panels surface finish even and smooth without using extra cement as in plinth protection including providing necessary joints complete all as specified and as directed.

Supply and fix for providing precast cement concrete louvers and jallies, 35 mm thick (measured solid), including all mouldings using cement concrete type B0 1:2:4 (12.50 mm graded aggregate) set in cement mortar 1:4 complete all as specified including demolition of existing precast louvers complete all as specified and as directed.

Material and labour for preparation of old plastered or unplastered surfaces of wall and applying one coat of cement base paint complete all as specified and as directed.

Supply and fix in repairs, Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings & straining and fixing to any type of post including screwing or tying at crossings with and provision of galvanised mild steel wire, staples as directed including taking out existing damaged barbed wire complete all as specified and as directed.

Excavating in post holes each n.exc 0.5 cum getting out removing soil to a distance n.exc 50 m and making good surface complete.

Material and labour for cement concrete 1:3:6 type C-2 (40 mm graded aggregate) as in post/strut foundation complete all as specified and as directed.

Supply and fix for MS work conforming to Fe-410-0 of Fe-310-0 Grade for 65X65X5 mm fencing posts and struts in fencing including cutting bending top to shape as directed drilling holes matching for barbed wire, including fillet on back side of fencing post and all necessary drilling work complete all as specified and as directed.

Supply and fix flat iron of size as directed as in fixing clamps or support to chain link fencing, stiffners etc fixed with nut and bolts including making necessry holes complete all as specified and as directed.

Dismantling mild steel work of any description and in any position complete all as directed by Engr-in-Charge.

Material and labour for Granite Work 18 to 20 mm thick (table rubbed and polished ) as in steps, jambs, pillars, window- cills and like over and including 15mm thick cement screed base in CM (1:4) including pointing with white cement (1:2) using marble dust with admixture pigment to match with shade of slab rubbing, polishing and rounding to edges including demolition of existing cill/cooking platform, pillar jambs and similar work complete all as specified and directed.

Material and labour for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe-410-W(Gde- E-250) quality-A complete all as specified and as directed.

Material and labour for plain, black mild steel sheeting in gates, 1.25mm thick sheet welded or shouldered to angle iron frame and complete all as specified and directed.

Material and labour for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, walk ways, railings conforming to Fe.290 Gde-E-165 complete all as specified and directed.

Dismantling chain link fencing of any gauge & size not exceeding 4 Kg/Sqm complete all as directed by Engr-in-Charge.

Supply only Chain link fencing GI wire 75x75 mm mesh including line wires, any mesh, size & type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed by Engr-in-charge.

Fixing only chain link fencing including line wires, any mesh, size & type to any type of standards, rails, straining blots, etc. including provision of binding wire complete all as specified and directed.

Supply and fix 10mm dia and over round bars cut to length bent to shape for stiffner etc and similar work complete all as specified and directed.

Material and labour Mild steel screw bolts (machine made) 5 ot 10mm dia of shank with hexagonal or square heads at one end and screwed the other, each screw end to be fitted with washers and one hexagonal or square nut exc 5cm but n exc 10cm long complete all as specified and directed.

Material and labour for preparation of new steel and iron surfaces of any description over 10cms width or girth and applying 2 coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material and labour for 25 mm thick PCC 1:2:4 type B-1 using 20mm crushed stone aggregate as in leveling course complete all as specified and directed.

Material and labour for coloured non skid ceramic tiles 300 mm x 300 mm x 6 to 7mm thick,in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed. MAKE :- SOMANY(REVEL LIGHT, VISTOSO SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK CERAMICS

Material and labour for glazed coloured ceramic tiles of size 300x200/450x300, 6 to 8 mm thick as in vertical surface such as in skirting/dado etc over and including 10 mm thick cement plaster in CM (1:4) all as specified and as directed. MAKE :- SOMANY (ELOGIO LIGHT, GLOSTRA SERIES) OR TECHNO COMMERCIALLY EQUIVALENT IN JOHNSON / KAJARIA (POLISHED SERIES) / RAK

Material and labour for vitreous china wash down water closet pan (EWC), white (excluding fixing bolts, flushing cistern and flush pipe) all as per Prayag cat Part No.4018 or 4019 or techno commercially equivalent makes specified in PS fixed as in repair, complete all as specified.

Supply and fix in repair two way angle cock with flange cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as per Prayag Cat Part No 7211 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Supply and fix in repair 2 in 1 Health Faucet (1.00 metre braided tube) with hook all as per Prayag Cat Part No.BEA-100-S or techno commercially equivalent makes specified in PS, with 1 meter SS Braided connection pipe complete all as specified and as directed.

Supply and fix in repair for Stainless Steel Jet spray(Butterfly) with 1.00 metre braided tube all as per Prayag Cat Part No.BEA-17 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Supply and Fix in repairs Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm (23" approx) white, with integral foot rests including PVC(SWR) 'P' or 'S' trap connecting to flush pipe and to anti syphonage pipe, all as per Prayag Cat Part No 4055 or techno commercially equivalent makes specified in PS. complete including making good to floor fixed in repair complete all as specified and as directed.

Supply and Fix in repairs PVC valveless, syphonic action type, Smart flushing cistern, 10ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, all as per Prayag cat Part No.501 or techno commercially equivalent makes specified in PS fixed as in repair, complete all as specified.

Supply and fix in repair for Vitreous China bowl urinal flate back size 330x250x445 mm wall mounted (minimum), with Waste coupling of CP, (excluding flushing cistern, flush pipe and waste pipe) including fitting of push cock with exting GI Tubing all as per Prayag Cat No 4999 or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.

Supply and fix in repairs 15mm bore chromium plated Concussive push button taps of cast copper alloy, screwed for iron pipe and fixed complete all as specified and as directed.(Make: Jaquar/Prayag/Kohler/Plumber)

Supply and fix in repair vitreous china wash basin white flat back size 450 x 300 mm excluding taps waste chain and plug and porcelain stopper but incl necessary brackets CP wastes and other fittings complete all as specified and as directed. MAKE :- Prayag Cat Part No 4646 or technocommercially equivalent

Supply and fix in repair Pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered Hot Or Cold With long screwed shanks and fly nuts screwed for iron pipes 15mm bore dia pipe complete all as per Prayag Cat Part No 8304 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Supply and fix in repair 32 mm bore and 800mm long PVC waste pipe suitable for WHB, Urinals etc all as per Prayag Cat No 3271 or technocommercially equivalent make complete all as specified and directed.

Supply and fix in repairs PVC connections 15mm dia with brass nut on both ends and washers 450mm long all as per Prayag Cat No 323-ZK or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.

Supply and fix in repairs bib taps standard of PTMT, any colour screwed for iron pipe suitable for 15mm dia all as per Prayag Cat No 121-E Grand series or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.

Supply and fix in repairs Bib taps 15mm dia, cast copper alloy chromium plated, long body, with CP flange all as per Prayag Cat No 8306 or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.

Supply and fix Angle cock, 15mm dia, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle screw down, screwed both ends for iron pipe or for brass ferrule all as per Prayag Cat No 8310 or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.

Supply and fix in repairs Stop cock (Concealed) cast copper alloy chromium plated fancy type with crutch or butterfly handle screwed down, screwed both end for iron pipe or brass ferrule with long shank and cup for 15 mm bore of pipe complete all as per Prayag Cat Part No 8318 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Supply and fix in repairs CP shower rose 125mm square with arm and flange including fixing to steel pipe complete all as per Prayag Cat Part No BS-66 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Supply and fix in repairs towel rail of brass CP 500mm long fixed with and including chromium plated brass screws and wooden / plastics cleats (min wt 170 gms) all as per Prayag Cat No BA-01 or technocommercially equivalent make complete all as specified and directed.

Supply and fix in repair PVC floor trap square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified and as directed.

Taking up or down existing steel tubing 15mm bore dia and connections including cleaning for refixing or removal to stores complete all as specified.

Taking up or down existing steel tubing 20mm bore dia and connections including cleaning for refixing or removal to stores complete all as specified and directed.

Supply and fix for tubes medium grade 15 mm bore galvanised with all fitting fixed complete to wall and celiligs or laid in trenches complete all as specified and directed.

Supply and fix for tubes medium grade 20 mm bore galvanised with all fitting fixed complete to wall and celiligs or laid in trenches complete all as specified and directed.

Refixing 15mm or 20 mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) complete all as specified and as directed.

Taking down shutters of any description exc 1.00 sqm but n.exc 2 Sqm each resecuring, easing , adjusting and re-fixing in same opening after minor repairs including all necessary fittings complete all as specified and as directed by engr-in-charge.

Supply and fix 110 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches, floor and wall including taking down old unserviceable pipe any description and any type complete all as specified and as directed.

Supply and fix PVC (SWR) Pipes single socketed in any length with rubber ring joints laid in trenches or in floors and wall 75mm bore including taking down old unserviceable pipe any description and any type complete all as specified and as directed.

Supply and fix in repair 110mm dia (bore of pipe) PVC bends (any radius), diminishing pieces or tapers (larger bore measured) with cement joints, complete all as specified and as directed.

Supply and fix in reapir PVC (SWR) bends 75mm dia bore any radius with access door complete all as specified and as directed.

Supply and fix in repair 110mm dia (bore of pipe) PVC bends (any radius), diminishing pieces or tapers (larger bore measured) with cement joints, complete all as specified and as directed.

Supply and fix in reapir PVC (SWR) branch piece, single (single Y) 75mm dia equal or unequal complete all as specified and as directed.

Supply and fix in repairs 75mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and as directed.

Supply and fix in reapir 110mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and as directed.

Supply and fix in repair 110mm bore PVC (SWR) vent cowl complete all as specified and as directed.

Supply and fix in repair 75mm bore PVC (SWR) vent cowl complete all as specified and as directed.

SAMBHAJI D JARANDE

S M MISHRA

MAHESH DADAJI BACHHAV

MANIYA CONSTRUCTION CO

J D Contruction

SUNIL VEER CONSTRUCTION