Re Construction of North Block of Secretariat Building (G plus 2) at Kavaratti

Amount

Surface dressing of the ground including removing vegitation and in equalities not exceeding 15cm deep and disposal of rubbish lead up to 50 metres and lift up to 1.5 metres

Earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 Sq.m on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc layers not exceeding 20cm plinth, sides of foundations etc layers not exceeding 20cm and watering lead up to 50 mtr and lift up to 1.5 metres

Filling with Quarry waste/debris ( Dismantled materials issued by department) in trenches, plinth, sides of foundations etc layers not exeeding 20cm plinth, side od foundations etc layers not exceeding 20cm and watering lead up to 50 mtr and lift up to 1.50mtr including loading , transportation and unloading at site.

Providing and laying cement concrete 1: 4:8 ( 1 cement: 4 M sand: 8 granite chips ) foundation and plinth.

Providing and laying cement concrete 1: 5:10 ( 1 cement: 3 M sand:6 granite chips ) foundation and plinth.

Providing and laying DPC 40 mm in cement concrete 1: 2 :4 ( 1 cement: 2 M.Sand: 4 granite chips 20mm nominal size)

Centring and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases of columns, etc. for mass concrete.

Centring and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform.

Centring and shuttering including strutting, propping etc. and remova of form for: Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Centring and shuttering including strutting, propping etc. and removal of form for: Columns, Pillars, Piers, Abutments, Posts and Struts.

Centring and shuttering including strutting, propping etc and removal or form for: Stairs, (excluding landings) except spiral-staircases.

Reinforced cement concrete 1:1:2 ( 1 cement: 1 M sand: 2 granite chips 20mm nominal size) excluding cost of centring and shuttering and reinforcement All work up to plinth level. (a) Foundation fooltings bases of column etc, and mass concrete.

Reinforced cement concrete work in (wall any thickness ) including attached ilasters,buttresses,plinth and string course,fillets,columns,pillars,piers,abutments,post and struts etc.. up to floor five level excluding cost of centering and shuttering finishing and reinforcement. 1:1.5:3 ( 1 cement :1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

Reinforced cement concrete work in beams, Suspended floors ,roofs,having slope up to 15 degree landings, shelves chajjas, lintels ,bands,plain window sills,staircase and spiral stair case up to floor five level excluding cost of centering and shuttering finishing and reinforcement.with 1:1.5:3 ( 1 cemet :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size )

Cold twisted steel reinforcemnt for R.C.C. work including bending, binding and placing in position complete

Brick work with modular bricks of class designation in foundation and plinth in C.M.1:6 (1Cement: 6 Metal sand)

Brick work in super structure above plinth level upto floor five level

6mm cement plaster to ceiling 1:3 (1 cement: 3 plastering sand)

15mm cement plaster 1:6 (1 Cement: 6 plastering sand) on the rough side or inside

12mm cement plaster 1:6 (1cement: 6 Plastering sand) on the out side

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/ Neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer- in-charge. (Glazing and panelling to be paid for separately): For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required EPDM rubber/ Neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer- in-charge. (Glazing and panelling to be paid for separately): (a) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought, framed and fixed in position-I class Karimaruthu/Ayini/Irul hold fast lugs or dasg fastener shall be paid for separately )

Providing and fixing 30 mm thick panelled, glazed or panelled and glazed shutters for doors windows and clerestory windows including anodised aluminium butt hinges with necessary screws. First class Karimaruthu /Ayini/Irul ( Double leef shettre)

Providing 40 x5 mm Iron hold fast 40 cm long including fixing to frames with 10 mm dia bolts nuts , wooden plugs and embedding in cement concrete block of size 30 x10 x15 cm of mix 1:3:6 ( 1 cement : 3 river sand : 6 graded stone agrigate of 20 mm nominal size )

Providing and fixing Karimaruthu /Ayini/Irul wood 25 mm squre wooden bars at required spacing in wooden frames of windows and clerestory windows

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 8 mm thickness

Providing and fixing 8mm thick (PVC) prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade 1 Type II in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side.

Providing and fixing to existing door frames. 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire-retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels confirming to TADS 6: 1993 and / or IS: 14856 - 2000 including fixing to frames. (For WC and bathroom door shutter).

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30mm thickness. The laminate shall be molded with fire resistantgrade unsaturated polyester resin and choppedmat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibreglass from all sides. MS stay shall be provided at the bottom to steady the frame.

Providing and laying vitrified floor tiles (premium quality) Anti-skid tiles in diffrent sizes (thickness to be specified by the manufacture) with water absorbtion less than 0.08 % and confirming to IS: 15622 of approved make in all colours and shades, laid 20mm thick cement mortar 1:4 (1 cement: 4 Plastering sand) including grouting the joints with white cement and matching pigments etc.. complete. Size 800x800 (flooring), Khajariya/Jonson/Bell

Providing and laying vitrified (premium quality) Anti-skid tiles in diffrent sizes (thickness to be specified by the manufacture) with water absorbtion less than 0.08 % and confirming to IS: 15622 of approved make in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 M sand ) including grouting the joints with white cement and matching pigments etc.. complete. (Skirting), 800x800, Khajariya/Jonson/Bell

Providing and fixing ceramic glazed floor tiles of Anti- Skid size 600x600mm (thickness to be specified by the manufacture) of first quality confirming to IS:15622 of approved make,in colours such as White, ivory, Grey, Fume red brown, laid on 20 mm thick cement mortar 1:4 (1cement, 4 Plastering sand) and joining with white cement and matching pigment etc... complete. (Mat finish) Khajariya/ Johnson/ Bell.

Providing and fixing 1st quality ceramic glazed wall tiles confirming to IS:15622 ( thickness to be specified by the manufacture ) of approved make,in all colours,shades except burgundy ,bottle green,black of any size as approved by engineer-in-charge in skirting,risers of steps and dado over 12mm thick cement mortar 1:3 ( 1cement, 3 Plastering sand ) and joining with grey cement slurry @3.3 kg per sqm,including pointing in white cement mixed with pigment of matching shade complete. Khajariya/ Jonson/ Bell

Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters ,window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 metal sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shade

Extra for providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work.

Providing edge moulding to 18mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Tile work

Extra for plastering done on moulding , cornices or architraves including neat finish to line and level

Stone tile (polished) work for wall lining over 12mm thick bed of cement mortar1:3(1 Cement:3 Coarse sand) and cement slurry @3.3Kg/Sqm including pointing in white cemnt complete. 8mm thick

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. (Birla White/JK wall care/VV Paint wall putty ).

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. Water thinnable cement primer (Nerolac / Berger/Asian Paint )

Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufactures specifications two or more coats applied with Teflon coated Royal coated) on walls @1.25ltr/10 sqm) over including priming coat of special primer applied @ 0.75 ltr/10 sqm. (Nerolac / Berger/Asian Paint )

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coat (Nerolac / Berger/Asian Paint )

Painting Wood work with Deluxe Multi surface paintto give an even shade.Two or more coats applied on @0.90ltr/10 sqm) over under coat of primer applied @ 0.75 ltr/10 sqm of approved and manufacture (Berger/Nerolac /Asian Paint )

Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc. complete as per direction of Engineer-in-Charge.

Providing and fixing Bright finished brass door stoper with rubber cusion & necessary screws .

Providing fixing bright finished brass hydraulic door closer with necessary screws and fittings

Providing and fixing anodised Aluminium sliding door bolt anodised transparent or dyed to required color and shade with bolts , nuts and screws etc complete. (a) D (300x16 mm)

Providing and fixing anodised Aluminium tower bolt (barral type) anodised transparent or dyed to required color and shade with bolts , nuts and screws etc complete. (a) (225x10 mm)

Providing and fixing anodised Aluminium handle anodised transparent or dyed to required color and shade with bolts , nuts and screws etc complete. (a) 125 mm

Providing and fixing anodised Aluminium hooks and eyes anodised transparent or dyed to required color and shade with bolts , nuts and screws etc complete.a) 200 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This inclues joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. For External Work (a) 15 mm nominal Bore

32 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This inclues joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work, including cutting chases and making good the walls etc.) 20 mm nominal bore

Providing and fixing CP brass bibcock of approved quality and manufacture complete. Conforming IS 8931, 15mm nominal bore

Providing and fixing CP brass stopcock of approved quality and manufacture complete. Conforming IS standard weighing not less than 810 gms ,15mm nominal bore

Providing and fixing health faucet of approved quality and manufacture complete.

Providing and fixing ball valve Brass of approved quality, High or low pressure, with plasic floats complete. 25 mm nominal bore

Providing and fixing nominal guage PVC Pipe of approved quality compleate with special flang compression type fittings including trenching and re filling etc. 110 mm nominal bore (6 kg/Sqcms)

25 mm noiminal bore (6 kg/Sqcms)

32 mm nominal bore (6 kg/Sqcms)

50 mm nominal bore (6 kg/Sqcms)

63 mm nominal bore

Providing Stair case Hand rail with first quality teak wood with Forming groove and fixed in position with all shape including French spirit polishing all complete as per the direction of Engineer-in-charge.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction and of approved size and design/ shape laid in required colour and pattern over and including 50mm thick compacted bed of Fine sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Providing and placing on terrace (at floor level) polythene water storage tank ISI:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipe but without fittings and the base support for tank. 2000 litre capacity. 1 No.

Providing and fixing white vitrous China water closet Pedestal pan (European) type WC pans with white plastic seat and lid and rubber buffers, 15 white vitrous China low level flushing system of approved make with fittings and brackets 40mm flush bend, 20mm over flow pipe with complete including cutting and making good the walls and floors where required. (Jaquar model No SLS-WHT-0311/SLS-WHT-0318/Hindware/Parrywar White EWC pan with plastic seat and lid

Providing and fixing white vitrous China wash basin with RS or CI brackets painted white, 15mm C.P bras pillar tap and C.P brass chain and rubber plug 32mm C,P. brass waste of standrad pattern 32mm diametre and waste pipe complete including cutting and making good the walls and floors where required White vitrous china wash basin 550x605x475mm with half pedastal (Jaquar modal FNS WHT - 1503/ Hindware/Parrywar

Providing and fixing mirror of superior glass (approved quality) complete with 6mm thick asbestose sheet ground fixed to wooden cleats with necessary screws and washers. ( Cera model No 5561 size 700x500mm )

Providing and Fixing PTMT towel rail with brackets fixed to wooden cleats with CP Brass screws with concealed fitting arrangement of approved quality and colour. 600 mm long towel rail brackets with total length of 645 mm,width 78mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms. (Viking/ Hindware/Parryware)

Providing and Fixing Stainless steel toilet paper holder in the cavity of wall with screws and washers superior quality of approved brand and manufacture

Providing and fixing PTMT grating of approved quality and colour.Rectangular type with openable circular lid.150 mm nominal size square 100 mm diameter of the inner hinged round grating.

Providing and fixing on wall face PVC. soil waste and vent pipe 75mm dia pipes

Team Constructions

SHERIN ABDULLAH P

SAMEER RIYAS