Kgi Dt Kptm Block Pck No 2025 26 KPTM 23 Pipeline and Motor Work at Marichettihalli Pts Sch UGF 2025 26

Amount

Providing New 10.00 HP Motor, Cable and Pipeline to the Existing Sump at Kottavur Thenpennai River to Marichettihalli village H/o.Marichettihalli - Rs. 29.90 Lakhs

Earth work excavation for laying of various type / size of pipes in hard stiff clay, stiff block cotton soil, hard red earth shales murrams, gravel stoney earth and earth mixed with small sized boulders and hard gravelly soil and depositing on bank with an initial lead of 10M and initial lift of 2m including shoring, strutting bailingout water from the trenches wherever necessary and all other incidental charges such as barricading providing danger light etc., complete (Pipeline Trench)

Supply and delivery of the following HDPE pipes - PE 100 conforming to IS 4984/2016 and its specials as amended from time to time with ISI marking suitable for water supply main including loading freight, transit, unloading and stacking them at stock yard etc. complete

110 HDPE PE 100 PN6 Pipes

100mm GI Collar

50 mm dia AV in 110 mm Main

Lowering and Jointing of HDPE pipes and specials to trench and laying to proper grade and alignment etc. complete

110 HDPE PE 100 PN6 Pipes

Refilling the excavated earth after the pipes were laid jointed and tested etc. complete.(Pipeline Trench)

Provision for New Motors and its Specials

Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 rpm, 3 phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP , Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation. 300 LPM X 100 M HEAD ( 10 HP)

LT CABLES

a) Supply and delivery of 1.1 KV Grade 3 1/2 core16 Sq.mm.PVC insulated and steel armoured Aluminium cable as per IS 7098 to lay from supply point to panel board.

b) Laying the above cable as per IE rules between the supply point and LT panel Board

c) Jointing for all cable including the cost of jointing materials lugs, cable clamps etc, complete.

a)Supply and delivkery of 1.1 KV Grade 3 core 10 Sq.mm flat type PVC insulated copper cable conforming to IS 694/1990 to be laid in between panel board to O.W PSET at sump through starter.

b) Laying the above cable as per IE rules from the panel board to O.W PSET through starter

c) Jointing the cable including jointimg materials

Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days300 LPM X 100 M HEAD ( 10 HP)

Supply and delivey of pipes and specials including Pipes and specials for errction of Open Well type Submersible Pump Set

80 mm GI (medium) pipes

80 mm GI (medium) coupling

80 mm GI (medium) bend

80 mm GI (medium) Tee

100 mm X 80 mm GI reducer

100mm GI Flange set

80mm GI Flange set

80 mm dia CI D/F sluice valves

80 mm dia CI D/F Reflux valves

Laying and Jointing of GI pipes and specials to trench and laying to proper grade and alignment etc. complete

80 mm GI (medium) pipes Cutting

80 mm GI (medium) pipes Threading

80 mm GI (medium) pipes

80 mm GI (medium) pipes Additional Spls

Provision for obtaining power supply from TNEB

Anchorage Arrangements

Drilling of bore well of 4" to 5" dia using hand boresets including insertion of casing pipes and removal of casing pipes in sandy soil complying with standard specification at 6 mt interval etc., complete.

PCC 1:2:4 using 20mm HBG stone for filling bore well pipe up to bottom including consolidation etc., complete

Supply and delivery of 160mm PVC 4 ksc pipes

Supply fabricating and placing in position of steel rods / flats for anchorage arrangements including cost of materials , labour charges, fabrication charges etc., complete.

Supply fabricating and placing in position of following MS flat including cost of material and fabrication charges for the clamps for anchorage arrangements etc., complete. MS flat of size 32mmx3mmx700mm long

Supply and delivery of 16 mm dia x 65mm length fully threaded bolts and nuts etc., complete. (For MS flat of size 32mmx3mmx700mm long)

Name Board

PhotoCharges

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

T.THIRUPATHI (BID ID -1453732)