PROVISION OF STATION STORE AT HEBBAL UNDER GE(NORTH) BANGALORE

Amount

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard dense soil all as specified & directed.

Removing excavated material (soil) to a distance exceeding 1.50 KM but not exceeding 5 KM and depositing where directed all as specified & directed.

Excavation in trenches not exc 1.5m wide and not exceeding 1.5m deep and getting out in hard/dense soil for fundation and smilar work all as specified & directed.

Excavation in trenches not exceeding 1.5m wide and exc 1.5 m deep but not exc 3.00 m deep and getting out in hard/dense soil for fundation and smilar work all as specified & directed.

Removing excavated material (soil) exc. 250m but not exc. 500 m and depositing where directed all as specified & directed.

Returning filling in including spreading, levelling, watering and well ramning in layers not exc 25 cm thick all as specified & directed.

M & L for Plain Cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified & directed.

M & L for Plain Cement concrete (1:3:6) type C-2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified & directed.

M & L for Reinforced cement concrete, design mix M-25 grade using 20mm graded crushed stone aggregate as in foundations footings, plinth beams, bases for columns, mass concrete etc., all as specified & directed.

M&L for Reinforced cement concrete, design mix M-25 grade using 20mm graded crushed stone aggregate as in Columns, pillars, piers, posts and struts etc., all as specified & directed.

M&L for Reinforced cement concrete, design mix M-25 grade using 20mm graded crushed stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span etc., all as specified & directed.

M&L for Reinforced cement concrete, design mix M-25 grade using 20mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified & directed.

M & L for Formwork to sides of concrete foundations, footings, bases of columns, and plinth beams, fair finished flat surfaces complete all as specified & directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished square, rectangular or polygonal surfaces complete all as specified & directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelvesincluding sup- ports, overhangs, etc. also splays between floors and beams, etc. rough finished flat surfaces complete all as specified & directed.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished flat surfaces complete all as specified & directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.

M&L for Mild steel TMT bars 5mm dia and over upto 10mm as in stirrups, spacers or binders, cut to length, bent to shape required, including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.

M&L for Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.

M&L for Pre-cast cement concrete (1:3:6) type C1 using 20mm graded crushed stone aggregate as in block masonary exceeding 10cm in width setting in cement mortar (1:6) complete all as specified & directed.

M&L for 15mm thick rendering over brick or concrete wall surfaces in two layers i.e., 10mm thick backing coat in cement mortar (1:6) and 5mm thick floating coat in cement mortar (1:4) mixed with water proofing compound as per manufacturer instruction all as specified and as directed. (Note : Water proofing compound will be measured & paid separately)

Supply only liquid water proofing compound, ISI marked, all as specified and as directed.

M & L for rendering 10mm thick cement mortar (1:6) on brick wall surfaces finished even& fair all as specified and as directed.

M&L for rendering 5mm thick in CM (1:3) on soffits of RCC slabs, roof projections, soffits and sides of RCC beams, waist slab, Loft Slab, RCC shelves, Chajjas, and the like finished even & smooth all as specified and as directed.

M&L for Hardcore of broken stone of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15cm thick, watered and rammed to a true surface all as specified and as directed.

M & L for Plain Cement Concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in 100mm thick sub base to floors, ramp etc. all as specified and as directed.

M & L for Plain Cement concrete (1:3:6) type C2 using 40mm graded crushed stone aggregate as in 75mm thick plinth protection finished even and smooth without using extra cement including joints filling with sealing compound Grade "A" complete all as specified and as directed.

M & L for Screed bed or bedding layer 20 mm thick in cement mortar (1:4) for laying floor finishes all as specified and directed.

M & L for machine cut kota stone slab 20-25mm thick in floors etc. over cement screed base, set and jointed in neat cement slurry mixed with pigment to match the shade of slab including rubbing & polishing all as specified and directed.

M & L for machine cut kota stone slab 20-25mm thick in riser of step, skirting etc. fixed over cement screed, set and jointed in neat cement slurry mixed with pigment to match the shade of slab including rubbing & polishing all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coat of cement base paint over self primer complete all as specified and as directed.

M & L for preperation of new plastered wall surfaces and applying two coats of Acrylic emulsion distemper over a coat of alkali resistant primer complete all as specificed and as directed

M & L for newly plastered surfaces of Ceilings, soffits of RCC slabs, roof projections, soffits and sides of RCC beams, waist slab, Loft Slab, RCC shelves, Chajjas and applying three coats of white wash complete all as specificed and as directed

M& L for providing water proofing treatment over RCC roof slab all as per following items all as specified & directed :- (i) cement plaster 15 mm thick cement mortar (1:3) mixed with and including liquid water proofing compound as per manufacturers instructions. (ii) Clean the existing surface properly and apply oil bound bitumen primer @ 0.40 litre / Sqm manufactured by the same agency as that of APP with a density o 0.87-0.89 Kg/Lit at 25º C on the prepared dry roof surface. (iii) Laying 3 mm thick APP modified membrane reinforced with non woven polyester matt with physical prosperities as under:-

(a) Membrane weight>3.8 Kg/ sqm (b) Non woven polyester weight>160 gm/Sqm (c) Softening point of membrane >150º C (d) Joint tensile strength longitudinal >650 Sqm Cm at 230º C & Transverse> 450/Sq Cm (e) Tear strength - longitudinal >300N & Tansverse >250 N Direction (f) Elongation > 30 % (g) Impermeability under water pressure > 3 Kg/Sq cm (iv) A coat of solar reflective bituminous aluminium paint @ 0.10 litre/sqm on top of APP membrane.

M & L for Second class hard wood plain, solid, straight chowkats and frames, clean sawn, frame rebeated on the solid , rounded or chamfered, put tegether with glue pinned at joints etc complete all as specified and as directed

S & F Plain framed, panelled shutter (two panel) of 35mm thick with lock rail and panel of 9mm BWP commercial ply or 12mm venereed particle board with commercial veneering on both faces. rail and style are of 2nd class hardwood & The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treateds fixed to chowkhat all as specified and as directed.

S & F Second class hard wood 35mm thick glazed and skeleton shutter Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and as directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed

S&F Steel ventilators with top hung shutter including hinges steel peg stay complete all as specified and as directed

S & F Butt hinges medium weight, cold rolled mild steel 100mm long and fixed to door frame and shutter duly welded/screwed complete all as specified and as directed

S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed

S&F Aluminium handle 150 mm long, cast type, anodised etc complete all as specified and as directed

S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed

S & F Floor door stopper of aluminium alloy powder coated, with hard down steel spring overall length of cover plate 140 mm all as specified and as directed.

S&F mild steel 300mm long ordinary rat tail rod pattern springs,including roller and roller plate complete all as specified and as directed.

Supply and fix sheet glass 4mm thick ordinary quality and glazing with rubber packing around the glass, in squares n. exc 0.5 Sqm in each pane complete all as specified and as directed.

Supply only stainless steel wire cloth 0.36mm nominal dia and average width of aperture 1.40mm and fixed with tinned tack or galvanized wire staple complete all as specified and as directed.

M & L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work as in ornamental type gate conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for Preparing new wooden surface of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed.

M & L for Preparing new steel surface of any description, not other wise described over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F in repairs stainless steel curtain rod of 20 mm dia bore with wood finishes (weight not less 200 gms per running meter) including fancy finale caps etc complete all as specified and as directed

S&F Bracket made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long incl wooden base etc suitable to curtain rod of 20 mm dia complete all as specified and as directed

M & L for Plain Cement Concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in surface channels & drains complete all as specified and as directed

M&L for Pre-cast cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in block masonry exc 10cm width and setting in cement mortar (1:4) complete all as specified and as directed

M&L for rendering 15mm thick cement mortar (1:4) on fair faces of brick work or concrete block walling surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for Plain cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping, benching of manholes and similar work including necessary formwork etc complete all as specified and as directed.

M & L for Pre-cast reinforced cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in cover slab for man holes, set in cement mortar (1:4) complete all as specified and as directed.

Excavating in post holes (or similar holes) in hard/dense soil each n exc 0.5cum and getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, all as complete all as specified and as directed.

M & L for Preparing surfaces of steel materials, steel and iron work, new or old, of any description and girth,not otherwise described, and treated with tar or coal tar black paint treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sqm but n exc 0.5 sqm each complete all as specified and as directed.

S & F Mild steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

Supply only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

S & F Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directed. (each line wire to be measured).

M & L for Preparation of new surfaces of steel not exc 10cm width or girth and applying two coats of synthetic enamal paint over a coat of red oxide primer complete all as specified and as directed over.

M & L for Point Wiring with 1.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and including non-metalic rigid PVC conduit medium grade ISI marked with accessories including GI/ MS branded sunken boxes of suitable module concealed on walls including modular frame and cover of suitable module fixed with cadmium plated iron screws for housing modular type switches, switch socket outlets, fan regulators etc., including provision of 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly for the following all as specified and as directed :-

One light point controlled by one switch

One fan/exhaust point controlled by one switch/regulator

One 3 pin socket out let 5 A on same board

One 3 pin socket out let 5 A on independent board

M & L for Point Wiring with 2.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and including non-metalic rigid PVC conduit medium grade ISI marked with accessories concealed wiring including GI/ MS branded sunken boxes of suitable module concealed on walls including modular frame and cover of suitable module fixed with cadmium plated iron screws for housing modular type switches, switch socket outlets, etc., including provision of 2.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly all as specified and as directed.

Note for Item No 66 to 67 :- (i) The earth wire for the points in the same circuit can be looped from point to point. (ii) Earth wire shall be taken inside the conduit. (iii) Cost of terminal box is deemed to be included in the item rate quoted for point wiring. (iv) Cost of a circuit of any length of cable from DB to any switch/ socket board to be included in point wiring.

S&F LED batten suitable for indoor applications 18/20 Watts, 4 feet with extruded aluminium housing & integrated LED channel rectangular white arcylic cover complete with all accessories all as specified and directed. (Make: Bajaj Cat No.BCLAB 18 WH LED P or equivalent Makes specified in List of make given in P S herein after)

S&F LED batten suitable for indoor applications 10 Watts, 2 feet with polycarbonate housing & integrated LED channel rectangular white arcylic cover complete with all accessories all as specified and directed. (Make: Bajaj, Cat No.BCLSB 10 WH or equivalent Makes specified in List of make given in P S herein after)

Supply and fix Modular switch 1 way 6 Amps,1 module 230 volts all as specified and directed.

Supply and fix Modular Socket, 6A - 2/3 pin combined 2 module, 230 volts all as specified and directed.

Supply and fix Modular switch 1 way 16Amps, 1 module 230 volts all as specified and directed.

Supply and fix modular Socket 6 /16Amps - 2/3 pin combined 2 module, 230 volts all as specified and directed.

S&F MCB TPN 415 volts 63 Amps 'C' curves complete all as specified and as directed

S&F MCB SPN 240 volts 40 Amps 'C' curves complete all as specified and as directed

S&F MCB single pole 240 volts 6 to 32 Amps 'C' curves complete all as specified and as directed

Supply and fix Modular Fan step regulator, 120Watts - 2 module, 230 volts all as specified and directed.

S&F MCB Distribution Board TPN 4 way, double door, 415 volts with 200 Amps rated busbar for housing of MCB incoming and MCBs outgoing as specified and as directed.

S&F ceiling rose, surface bakelite type 65 x 50 mm, 2 to 3 terminals, 230 volts all as specified and as directed.

M&L for earthing with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles,check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2009 and as specified or indicated and testing on completion including earth work and excavation in any type of soil, PCC (1:3:6) type C1 chamber, pre cast slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia TMT bars reinforced at 10 cm centre to centre both ways including funnel with watering G I pipes, protection pipes, wire mesh and lugs, including test point complete all as specified and as directed.

S&F LED bldg security light fitting 30Watts with pressure die cast housing along with prismatic polycarbonate difuser with IP 66 protection complete all as specified and directed. (Make:- Bajaj, Cat No.:- ENXT P 30L WH SY PC SD or equivalent Makes specified in List of make given in P S herein after)

S&F Bracket made out of GI tubing medium grade 25 mm bore, approx length 1.5 m long including MS clamps made out of MS flat iron 25 x 6 mm, nuts, bolts, washers etc and including applying two coats of aluminum paint over a coat of red oxide primer complete all as specified and directed.

S&F Ceiling fans with accessories, 230Volts, Single Pole, 1200 mm Sweep with BEE 3 Star rating and fixing the fan from ceiling rose with 3 core flexible copper wire 24/0.20 sqmm, etc all as specified and as directed.

Excavation in trenches in soft/loose soil not exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying of cables/errection of pole etc complete all as specified and as directed.

M&L for sand cushioning with a layer of river sand 23 cm thick under and above the cable all as per Para 19.75 of SSR Part-I complete all as specified and as directed

Supply & laying sub class 'B' burnt bricks for cable protection laying all as per Para 19.75 of SSR Part-I complete as specified as directed

Supply & laying XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armouned power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 16 Sqmm, 4 core laid in trenches/wall testing etc complete as specified as directed

S&F G I tubing, light grade 32 mm bore with all fitting laid in trenches / fixed on walls / Roads for cable protection complete as specified as directed.

S & F steel water tubing 20 mm bore medium grade, galvanised, with all fittings, laid in trenches ducts/culverts/road/path/wall complete all as specified and directed. (Note: Excavation and earth work shall be measured and paid for separetely).

S & F steel water tubing 25 mm bore medium grade, galvanised, with all fittings, laid in trenches ducts/culverts/road/path/wall complete all as specified and directed. (Note: Excavation and earth work shall be measured and paid for separetely).

S&F in repair Gun-metal, globe or gate valves 25mm dia bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair Gun-metal, globe or gate valves 20mm dia bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Cutting to existing CI/DI/GI pipe line of size up to 100 mm dia required for repair/replacement of pipe line and insertion of collars/tail pieces, tee etc including dewatering of pit if any complete all as specified and directed. (Note : Excavation and earth work if any shall be deemed to be included in quoted rate)

SRI GANESH ENTERPRISES (BID ID -3347632)

M/s. ARK BUILDERS (BID ID -3340466)

AMR CONSTRUCTIONS (BID ID -3351118)

B.B. Enterprise (BID ID -3342623)