PROVN OF SEPTIC TANK FOR 360 USERS WITH ALLIED SEWAGE WORK AT TRISHUL LINES TOILET FOR ADMIN STAFF AT EAGLE COMPLEX AND ADDN/ALTN TO 30M SEWAGE PIPE LINE FOR HQ COY COOK HOUSE UNDER GE MCEME SECUNDERABAD

Amount

Demolition and breaking up 150/200 mm drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, etc complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe single socketed,in any length with rubber ring joints, laid in trenches or in floors incl taking down existing u/s pipe.

All as per item No.02 above but fixed to walls.

Excavation in trenches n.exc 1.50m wide and n.exc. 1.50 m depth and getting out in hard/dense soil.

Excavation in trenches n.exc 1.50m wide and exc. 1.50 m but n.exc. 3.0m depth and getting out in hard/dense soil.

Excavation over areas not exceeding 1.5m deep and getting out in hard/ dense soil complete all as specified and directed.

Excavation over areas exceeding 1.5m deep but not . exceeding 3.0 m depth and getting out in hard/ dense soil complete all as specified and directed.

Excavation over areas exceeding 3 m deep but not . exceeding 4.5 m depth and getting out in hard/ dense soil cutting by chisel or mechanical plant , etc complete all as specified and directed.

M&L Reinforced concrete pipes 200mm dia bore, class NP2, with collars laid in trenches and jointed in cm 1:1 incl demolition/ taking up of old pipe ll as specified and directed.

Ditto all as Item 8 above but 150 mm dia

M&L for Cement Concrete 1:3:6 type C-2 as concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 200 mm dia pipe

M&L for Cement Concrete 1:3:6 type C-2 as concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 150 mm dia pipe

Returning, filling in incl spreading, leveling, watering and well ramming in layers n. exc 25 cm all as specified.as in soft /loose soil

Removing excavated materials n'exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above the starting point in soils.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for 200/225mm dia pipe complete all as specified and as directed.

Demolition of brick work or stone masonary, built in cement mortar Note:work to be carried in Dirty/foul soil in Md accn. area.

M&L brick work with fly ash bricks built in CM 1:4 with modular bricks 'B' bricks straight or curved on plan exc 6 mtr mean radius all as specified

M&L 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces of walls finished the surface even & smooth without using extra cement

S & F PVC (SWR) vent cowl, bore of pipe in 75 mm, etc complete all as specifed and directed.

S & F PVC (SWR) vent cowl, bore of pipe in 110 mm, etc complete all as specifed and directed.

S & F PVC (SWR) bends any radius, bore of pipe in 75 mm, etc complete all as specifed and directed.

S & F PVC (SWR) bends any radius, bore of pipe in 110 mm, etc complete all as specifed and directed.

M&L salt glazed stone ware gully traps square or rounded mouthed type'P' of size 150 x 150 mm fixed in cement concrete complete in repairs

Demolition of cement concrete(un-reinforced) in floors and paving n'exc 15 cm thickness below or above ground floor all as specified.

M&L PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete.

M&L PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) set in CM 1:4 as in benching to manholes/drain surface.

Demolition of cement concrete of any description in any position (Reinforced).

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia

M&L PCC 1:2:4, type B1 (using 20 mm graded stone aggregate as in pre-cast cover slabs for manholes incl necessary form work set in CM 1:4 all as specified. (Reinforcement will be measured & paid separately)

M&L for RCC 1:1.5:3 type A1 using 20mm graded aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

M&L for Cement concrete cast-in situ 1:2:4 type B1 using 20mm graded aggregate as in lintels up to 1.5m clear span,cills steps:seimic and other similar bands,plinth courses,string scourses,lacing courses,perapets and railings upto 60 cm in height, copings, kneerlers, apex stones, bed plates, kerbs not provided water troughs and thelike including wethering,slightly rounded or chamfred angles and throating,as directed (the rate include use of form work )

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

M&L for plain cement concrete 1:3:6 type C2 using 40mm graded aggregate as in pavings 100mm thick finished even and smooth using extra cement at road cuttings/ foothpath

M&L RCC type B1 (1:2:4) using 20mm graded aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete

M&L RCC type B1 (1:2:4) using 20mm graded aggregate in Columns, pillars, piers, posts and struts

M&L RCC type B1 (1:2:4) using 20mm graded aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span

M&L RCC type B1 (1:2:4) using 20mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like

M&L RCC type B1 (1:2:4) using 20mm graded aggregate in Chajjas

Formwork to sides of concrete foundations, footings, bases of columns, raft & raft beams, sides & soffits of foundation & plinth beams; and similar work; verticle or to batter Rough finished surfaces of concrete flat

Formwork to sides of pillars, posts, struts, piers,columns, and stanchions Rough finished surfaces of concrete Square, rectangular or polygonal

Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat

Formwork to chullah hoods, chajjas, troughs & similar items including edges Rough finished surfaces of concrete flat

M&L mild steel TMT bars 8mm dia and over cut to length bent to shape required including cranking, bending spirally including mild steel wire not less than 0.9mm dia or securing with clips for stirrups

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6)

M&L Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4)

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6)

M&L Rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling

M&L for hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface with broken stone or boulders

M&L for 75mm thick PCC 1:4:8 typeB1 using 20mm graded stone aggregate as in sub base etc.

M&L for 100mm thick PCC 1:2:4 type D2 using 40mm graded stone aggregate as in hard standing finished even and smooth with out using extra cement

M&L 25mm average thick cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in floors, etc finished even and smooth with using extra cement

S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6)

M&L for glazed ceramic coloured tiles 450x300x7mm thick on vertical surfaces such as dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick backing coat in CM 1:4 complete all as specified

M&L for PCC (1:3:6) type C1 using 20mm graded aggregate as in plinth protection of average 75mm thick finishing cement concrete surface even and smooth without using extra cement

M&L for 2 coats of cement base paint over a coat of primer including preparation of newly plastered surface on walls

Applying two coats of Distemper oil emulsion, white or tinted on new wall surface including preparation of surface.

Applying two coats of Distemper oil emulsion, white or tinted on new ceiling surface including preparation of surface.

S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), etc complete all as specifed and directed.

S&F vitreous China wash hand basin of size 550 x 400mm white flat back including chromium plated pillar tap, waste coupling, including brackets, PVC waste pipe, including cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed by Engineer-in-Charge.

S&F PVC low level flushing cistern, white, 10 ltr. Capacity, complete with all internal accessories flush pipe & fixed to wall & making good to wall surfaces complete all as specified

S&F PVC connection pipe 15mm bore 450mm long complete all as specified

S&F 15mm dia bib taps, chromium plated fancy type, cast copper alloy with fancy type handle , screwed down , screwed for iron pipe or for brass ferrule with wall flange.

S&F CP 15mm, stop valves/ angle cock, cast copper alloy with crutch or butterfly handle, screwed down, high pressure, screwed both ends for iron pipe complete all as specified

S&F brass chromium plated tubular towel rail, 20mm dia, D-type, 60cm long between flanges

M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement

S&F PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified

M&L rotational moulded polyethylene water storage tanks (cylindrical verical with closed top) hoisted and fixed in position all as specified in 500 ltrs capacity with15 mm HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule complete all as specifed and directed.

S&F Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe

S&F Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule

S&F GI Tubes, 'medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors of 15mm bore

S&F GI Tubes, 'medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors of 20mm bore

M&L Solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per manufacturers instruction all as specified

S&F 125x60mm pressed steel frames for doors with one or more rebats including necessary fixing lugs, hinges, lock strike plate etc.

M&L for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercials type on both sides complete all a specified and directed.

S&F 2nd class hardwood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads of securing glass, gauze etc and fitted to chowkats complete all as specified and as directed by Engineer -in-Charge.

M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.

S&F factory made solid PVC moulded Door shutters, 28 to 30mm thick (Styles) with 1, 4, or 6 nos raised panels design with particle board core, with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face and 2mm prelam PVC sheet on back fae complete all as specified

S&F 100mm long butt hinges medium weight extruded brass with brass/bronze hinge pin in lieu of mild steel pin type B-11 complete all as specified

S&F 150mm long powder coated Aluminium barrel tower bolt of extruded section and fixed complete all as specified

S & F for Extruded aluminium alloy handles, fabricated type,anodised, Size of handle in 150 mm,etc complete all as spd and directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

S & F for MS, 300mm, ordinary rat tail rod pattern springs including roller and roller plate, etc complete all as spd and directed.

S&F powder coating anodised aluminium window and ventilators shutters, side hung or sliding type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packings anodised aluminium snap beading, screws, anodised

S&F figured glass 3.0mm thick, pin head type & glazing with glazing clips in squares n exc 0.5 sq.m in each pane.

S&F in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc.complete all as specified and as directed by Engineer-in-charge.

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors

M&L salt glazed stoneware drain pipes laid in trenches & jointed as specified of 150mm dia.

M&L PCC in surface channels and drain type B1 (1:2:4) using 20mm graded stone aggregate.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard/ dense soil

M&L for machine pressed precast concrete interlocking paver block of any size confirming to IS 15658-2006 of 80mm thickness M-40 Grade all as directed.

M&L for 50mm thick sand cushion / sand filling under floors or in foundations including watering and consolidation complete all as specified.

M & L for Point wiring on concealed conduit with 1.5 Sq mm copper conductor single core PVC insulated unsheathed 1100 V grade multistranded drawn through conduit and including rigid PVC conduit and conduit accessories of suitable dia medium grade and steel terminal boxes including fixing/grouting sunken as per site requirement and covered with suitable PVC modular covers and plates including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets etc all as specified for:

(a) One light point/one ceiling fan point/One exhaust fan point controlled by one controlled by one, one way switch 5 A, SP

(b) One 3pin 5amps switch socket outlet piont controlled by one switch on independent board

(c) One 3pin 5amps switch socket outlet piont controlled by one switch on same board

Description all as per item No 1 here-in-before but using 2.5 Sq mm single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for 6/16 Amps switch socket combination point including running of 2.5 Sq mm copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

S & F Switch Modular type one module one way 6 Amps capacity 230 volts.

S & F Switch Modular type one module one way 16 Amps capacity 230 volts.

S & F Modular socket 6 amps -2/3 pin 2 module of capacity 230 volts

Supply and fix socket Modular type multipurpose 2/3 pin combined 16 Amps, 230 Volts complete all as specified.

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified.

S and F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 Volts double door with locking system complete all as specified.

Supply & Fix MCB SPN 240 volts C' series suitable for fixing on MCB DB's of capacity 32 Amps,C series 10 KA breaking capacity complete all as specified.

Supply & Fix MCB SP 240 volts suitable for fixing on MCB DB's of capacity 6 to 32 Amps 10 KA breaking capacitycomplete all as specified.

S & F building security light of capacity 45 watt including suitable GI bracket along with clmps,nuts and bolts etc all as specified and directed.

Supply & Fixing LED batten of capacity 18 watts,indoor decorative Polycarbonate housing extruded and integrated type complete with all accessories , prewired fixed to wall/ceiling with 2 Nos PVC round blocks with necessary hanging/fixing arrangements & connecting to the point wiring with necessary flexible copper conductor of multisranded three core of suitable length from fitting to the ceiling rose complete all as specified.

Supply & Fixing supply and fix lamp holder PVC/Poly carbonate body with back plate all accessories including lamp 9/11 W all as specified and directed.

S & F exhaust fan with metal body of 300 mm sweep, single phase 50 Hz, AC with louver and connecting up with and including provision of PVC insulated copper flexible cord of size 23/0.019, 3 core from ceiling rose to connection of exhaust fan complete all as specified.

S & F Ceiling fan 1200 mm sweep 2 star rated, single phase 50 Hz, AC and connecting up with and including provision of PVC insulated copper flexible cord of size 23/0.019, 3 core from ceiling rose to connection of ceiling fan complete all as specified.

M & L Submain wiring with 2 runs of single core 10 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not less than 25 mm dia including one run of single core 10 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board all as specified and as directed.Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured as one unit length.

Earthing complete with galvanised steel earth plate electrode 60cm x60cm x6mm thick buried directly in ground earth pit not less than 2.25 mtr deep below normal ground level ) with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth lead 4mm dia, by means of nuts, bolts, check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe light grade 15mm bore from earth elelctrode to DBs/main switch incl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 40mm thick cover of RCC (1:2:4) reinforced with GI pipe light grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, all as per electrical plate No 3 of SSR Part-I and connection to earth test point all as specified incl testing on completion. Note :- Item of Earthing includes cost of 7.5m long galvanised iron earth lead 4mm size and protection pipe of 15mm bore GI light grade.

M/S M.N.Reddy