Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance INDEX NO B 33 NC R O KRALPORA DISTT BUDGAM SRINAGAR J K 190019 | SRINAGAR | BUDGAM | JAMMU AND KASHMIR | 190019 | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
| 5 | Admitted-Finance | Admitted-Finance |
Tender Value
₹32 L
EMD Value
₹64,000
Closing Date
20 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARISSON ENGINEER
GE 970 EWS C/o 56 APO
REPAIR TO PLINTH PROTECTION, PLASTER, MASONRY AND OTHER WKS INCLUDING CLEANING OF SEWAGE LINES SEPTIC TANKS AND MANHOLES ETC AT OAF UNDER GE 970 EWS
2023_MES_604911_1
GE 970 EWS-14/2023-24
Open Tender
Civil Works
Item Rate
270 days
OAF
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE 970 EWS
₹64,000
Yes
24 Jul 2023
22 Jun 2023
22 Jul 2023
22 Jun 2023
20 Jul 2023
6 Jul 2023
Amount
Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed.
Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each complete all as specified and directed.
Taking down shutters of any description exc 1.00 Sqm and n exc 2.00 Sqm each complete all as specified and directed.
Taking down shutters of any description n exc 1.00 Sqm complete all as specified and directed.
S&F 2nd class hardwood plain solid, straight chowkat and frames, wrought, framed rebated (one or more rebated) on the solid, rounded or chamfered put together with glue pinned at joints all as specified and directed.
S&F factory made 35 mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepare to receive gauge etc (with sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for secruing glass/gauge etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.20(a), fitted to chowkats complete all as specified and directed.
S&F factory made 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated prepared to receive glass, gauge etc. (sash bars as required) edges of framing plain, chamfered or rounded, cut or mitred beads for screwing glass etc. Sizes of members of shutters as specified in SSR Part - I, Section 8, Clause 8.20(b) complete all as specified and directed.
S&F factory made 35mm made shutters plain framed, panelled shutter with lock rail and panel of 9 mm BWP commercial ply or 12 mm to 15mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part - I) kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F factory made solid PVC door Frame of size 50 mm x 47 mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube in opening complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed.
Supply & fix 100 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.
Supply & fix 100 mm size extruded aluminium alloy butt hinges with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.
S&F 150mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed.
S&F 100mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed.
S&F Floor door stopper of aluminum alloy body and tongue anodized with hard drawn steel spring fixed in floor of length 150mm complete all as specified and directed.
Supply & fix 300 mm long aluminum anodized sliding door bolt, plate type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.
S&F Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed.
Hasp and staple safety type 100 mm size, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed .
Supply and fix in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
Supply and fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
Supply and fix 4mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane incl hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads complete all as specified and directed.
Supply and fix 4mm thick figured glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane incl hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads complete all as specified and directed.
Supply & fix door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.
Non skid ceramic tiles coloured pattern as required of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the existing, over with and including 15mm thick screed bed in CM (1:4) after dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
Non skid ceramic tiles coloured pattern as required of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the existing, over with and including 15mm thick screed bed in CM (1:4) after dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
Non skid ceramic tiles coloured pattern as required of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the existing, over with and including 15mm thick screed bed in CM (1:4) after dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
All as per item No. 26 above but on skirting over with and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.
Glazed ceramic tiles coloured, pattern as required (dark & light shade combination) 450 x 300 x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match the existing, over with and including 10mm thick backing coat in CM 1:3 after dismantling floor hearth or wall and rubbish off the premises complete all as specified and directed
Vitrified ceramic tiles coloured pattern as required 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to matche the existing, over with and including 15mm thick screed bed in CM 1:4 and dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premisescompete all as specified and directed
ditto- all as per item No.29 above but on skirting over with and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.
Material & labour in repair factory made machine pressed precast concrete interlocking paver block with grey cement and pigment any shpe and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with andincluding 25mm thick sand cushoning complete all as specified and directed.
Material & labour for 18-20mm thick machine cut kota stone slab 550mmx550mm/600mmx600mm laid in floors, slabs and steps etc jointed with grey cement slurry mixed with pigments to match the shade of the slab including cutting, rubbuing and polishing over and including screed bed 15mm thick in cement mortar (1:6) and demolition of old stone slab complete all as specified and directed. Note - Kota stone for step shall be in single piece.
All as per item No.32 above but in riser of steps, skirting, dado and pillarwith and including 10mm thick backing coat in CM 1:4 -ditto-
Material & labour for granite (of any type) work, 18 to 20mm thick machine cut (table rubbed and polished) in steps jambs, pillars, window cills, cooking platforms, shelves in cupboard, handwash places and like including necessary cutting and grooving to walls and making good including 15mm thick in cement mortar (1:4) screed bed or bedding layer and pointing with cement mortar (1:2) with admixture of pigment to match with shade of granite 6) and demolition of old stone slab complete all as specified and directed.
Material & labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.
Demolition of unreinforced cement concrete in ground floors and paving n. exc 15cm thickness (below or above ground level) complete all as specified and directed.
Material & labour for PCC (1:7:12) type F-2 (using 40mm graded stone aggregate) as in filling of sunken floors, mass concrete etc complete all as specified and directed.
Material & labour treatnent for sunken portion with and including 10mm thick cement plaster in CM (1:3) mixed with liquid WPC @200ml per bag of cement over brushing neat cement slurry when concrete surfaces is green, over after dry of plaster surface two coats of industrial bitumen 85/25 laid @1.2kg/sqm incl cleaning of surface over 150 micron PVC film laid when bitumen is hot complete all as specified and directed. Note : Rate of WPC, bitumen and PVC films are included in the item
Material & labour for 25mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate), as in sub base for floors complete all as specified & directed.
Material & labour for brick work with sub class 'B' bricks, old size, straight or curved on plan to any radius in half thick brick wall built in cement mortar (1:4) incl demolition of old work complete all as specified and directed.
M&L for 15mm thick rendering on fair faces of brick/stone work or concrete sufaces in CM 1:6 including finishing even and smooth without using extra cement including preparing of new plaster surfaces on walls and applying three coats of white wash complete all as specified and directed.
M&L for 15mm thick rendering on fair faces of brick/stone work or concrete sufaces in CM 1:6 including finishing even and smooth without using extra cement incl taking down cement plaster or brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water including preparing of new plaster surfaces on walls and applying two coats of oil emultion distemper of surface upto true finish over a coat of water base primer complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern in roof coverings complete all as specified and directed.
Supply & fix 0.63 mm thick galvanised corrugated mild steel sheeting with two corrugations side lap bent to curve/shape, fixed with coach screws and washers or with L/J type hooks in roofs, wall or gate/door covering etc. with grade of zinc coating 275 complete all as specified.
S&F 1.00 mm thick plain galvanised,mild steel sheeting, with grade of zinc coating 275 as in ridges, hips vally gutters drip and straight flashing (length and grith as fixed) complete all as specified and directed.
M&L preparing new steel surfaces of any description over 10 cms width or girth and applying two coats of synthetic enamel paint in approved colour & pattern over one coat of red oxide zinc chrome primer, complete all as specified and directed.
S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed.
S&F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws as in ridge,eaves boards, hips, velly gutter drip and straight flushing of reuired machine moulded shape and size complete all as specified and directed.
Dismantling structural steel work including doors, gates etc complete all as specified and directed.
S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.
Supply & fix in repairs bib taps, cast copper alloy, chromium plated with crutch or butterfly handles, screwed down for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.
Supply & fix in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including necessary cutting chasing etc. complete all as specified and directed.
Supply & fix in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including necessary cutting chasing etc. complete all as specified and directed.
Supply & fix in repairs PVC (SWR) 110mm junction single (Single 'T') equal or unequal complete all as specified and directed.
Supply & fix in repairs PVC (SWR) 75mm junction single (Single 'T') equal or unequal complete all as specified and directed.
Supply & fix PVC (SWR) 110mm bore bends with access door any radius complete all as specified and directed.
Supply & fix PVC (SWR) 75mm bore bends with access door any radius complete all as specified and directed.
Supply & fix in repairs PVC (SWR) 110mm bore vent cowl complete all as specified and directed.
S&F 15 mm dia steel water GI tube medium grade with all fittings and concealed in walls, ceilings or laid in floors incl cutting chases and taking up or down 15mm dia bore old steel tubing and connections complete all as specified and directed.
S&F 12mm thick Gypsum board fixed in false ceiling grid made with anodized GI powder coated frame work with 605mm x 605mm size snap gird fixed with screws / staples and hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete including dismantling ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.
S&F in repair 8mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish complete all as specified and directed.
S&F in repair for 2nd class hard wood plain fillets, sectional area exceeding 6 sqcm but not exceeding 13 sqcm, square, rectangular or triangular in section, clean sawn, secured with nails all as specified and as directed.
S&F in repair 18/19mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as in shelves, partition, wall and lineing complete all as specified and directed.
S&F 0.9mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.
M &L 2nd Class hard wood Scantling, clean swan, timber framed work and fixed incl dismantling timber scantling 40 sqcm and over in section and any position in framed work all as specified and as directed.
S&F in repair 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face; fixed with screws to timber frame work complete all as specified and directed.
M&L in repairs for 25 mm thick 2nd softwood planed one side & edges tongued and grooved or rebated, and fixed with nails and including dismantling of baording any description, fixed in any position with nails including fillets complete all as specified and as directed.
Supply & fix in repairs vitreous china wash down water closet pan (pedestal pattern) white including 10 ltr capacity flushing cistern, PVC connection 450mm long and 15mm dia ,PTMT nuts of length 450mm, plastic water closet sheet cover white, closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device and including mild steel chromium plated jet fixed to water closet with 360mm wide x 390mm high and 415 to 445mm long flexible pipe complete all as specified and directed.
Supply & fix in repairs squatting pan WC Orissa pattern size 630mm x 450mm white with integral foot rest including 10 ltr capacity flushing cistern with flush pipe , PVC connection 450mm long with P or S trap including provision of lime concrete bedding including breaking up existing damaged WC seat and connecting flush pipe etc making good to match with existing surfaces complete all as specified and directed.
Supply & fix in repairs angle valve fancy type chromium plated (concealed) type with long shank & cup 15mm bore, cast copper alloy, screwed down with high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and directed.
Supply & fix in repairs wash hand basin vitreous china coloured, flat back, size 550 x 400 mm with a set of CI brackets, brass chromium plated waste fittings and PVC waste pipe 32 mm bore, PVC connection 450mm complete all as specified.
Supply & fixing in repair viterous china wash hand basin, white of size 835 x 560 x 440mm, padestal type with padestal excluding taps, waste, chain and plug and porcelain stopper but including bracket, cutting for and pinning the ends of brackets including PTMT waste coupling & waste pipe as suitable complete all as specified and directed .
Supply & fixing in repair sinks with drainage board made of stainless steel 1mm thick (kitchen or laboratory) with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm including PTMT waste coupling & waste pipe as suitable complete all as specified and directed .
Supply & fixing in repair PTMT grating dome 100 mm dia (minimum weight 25 gms) complete all as specified and directed .
Supply & fix in repairs 15mm bore brass central hole, sink CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.
Supply & fix in repairs 15mm bore brass central hole, basin CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.
Supply & fix in repairs 15mm bore brass wall mixer CP for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.
Supply & fix in repairs CP shower rose brass chromium plated square type of size 125mm with or without swivel joints including fixing to steel pipe or union of 15mm bore complete all as specified and directed.
Supply & fix in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, bracket PVC short bend etc. complete all as specified and directed.
Supply & fix in repairs PVC connection 15mm bore size with PTMT nuts of length 600mm complete all as specified and directed.
Supply & fix in repairs PVC connection 15mm bore size with PTMT nuts of length 450mm complete all as specified and directed.
M&L for cleaning of SGSW /RCC/PVC sewage line of 250mm dia by rodding/auger rods & drain pipe machine as required for one manhole to another manhole including including gully traps and getting out the sludge from any size of manholes and gully traps, before & after cleaning process of SGSW /RCC/PVC sewage line and well flushing using clean water through water bowser of pipe of any capacity (arranged by the contractor) and removing the sludge etc to a distance n.exc 250m and burying the same underground by digging pit of suitable size from habitant area and returning filling with excavated materials up to ground level including removal of surplus soil to a distance n.exc 250m with and including taking off manholes/gully trap covers and re-fixing the same after cleaning process complete all as specified and directed.
M&L for dewatering of contaminated waste effluent from septic tank soakage well of any capacity by sewer jetting cum suction machine vehicle/ honey sucker machine vehicle from any location with and including taking off & re-fixing manholes covers etc. complete all as specified and directed.
M&L for Cleaning of septic tank of any capacity and depth incl inlet chamber, outlet chamber after mixing of contaminated waste effluent and sludge etc of septic tank by mixing machine to change the state of solid/semi solid sludge to liquid state by using extra water provided by the contractor if required and getting out through sewer jetting cum suction machine vehicle from any location and disposal to suitable place i.e. authorised civil location with and including taking off & re-fixing manholes covers etc. complete all as specified and directed.
M&L for cleaning/taking off of sludge (solid/semi solid) of any state from manhole of any size including gully trap having depth upto having depth upto 3.00m by using machinery or manually as required and removing the same to a distance n.exc 250m and burying the same underground by digging pit of suatible size in low laying area from habbatient area and returning filling with excavated materials up to ground level including removal of surplus soil to a distance n.exc 250m with and including taking off manholes/gully trap covers and re-fixing the same after cleaning process complete all as specified and directed..
M&L for opening/cleaning of blocked WC of any type, traps and CI/PVC drain pipe including fitting (i.e. access door bends/tee etc.) of any size at any floor & position with and including taking down of CI/CP/PVC grating and refixing the same at position with appropriate materials/fitting i.e. white cement, solvent, nuts & bolts etc. and well flushing, pressure pumping, taking out all residue materials etc.and removing the same to a distance n.exc 250m and burying the same underground by digging pit of suitable size from habitant area and covering same with the earth level including removal of surplus soil to a distance 250m complete all as specified and directed.. Note for item no. 1 to 5:- (i) The contractor/site superivisor will attend the complaint cell of AGE B/R-I to receive the complaint slips daily at 09:00 hrs to carry out the complaints within 48 hrs from reciept of complaint slip and completion report will be submitted to concerned JE/AGE.
Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed.
Returning filling in layers including leveling watering and well ramming in layers not exc. 25cm thick complete all as specified and directed.
Removing surplus spoil to a distance exc. 250m but not exc. 500m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and directed.
S&F for asbestos cement pipes 100mm bore laid in trenches and jointed on concrete bed including packing of collars of pipe in cement mortar 1:3 with and including demolition and breaking up drain pipes, 100 mm dia drain pipe of any type set in cement mortar complete all as specified and directed.
All as per item no. 90 above but dia 150mm bore.
M&L for Salt glazed stoneware drain pipes of internal daimeter 150 mm grade 'A' laid in trenches and jointed incl demolition and breaking up drain pipes (salt glazed stoneware, AC or Reinforced concrete) set in cement mortar any internal dia of pipe complete all as specified and directed.
M&L for Salt glazed stoneware drain pipes of internal daimeter 200 mm grade 'A' laid in trenches and jointed incl demolition and breaking up drain pipes (salt glazed stoneware, AC or Reinforced concrete) set in cement mortar any internal dia of pipe complete all as specified and directed.
M&L for concrete bed to drain pipes 100mm bore laid bed including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 complete all as specified and directed.
All as per item no. 94 above but for dia 150/200mm bore.
Cutting into existing manhole removing existing drain making good to wall and rendering cutting out branch channel and making good benching for 100mm dia pipe in cement concrete 1:2:4 complete all as specified and directed.
All as per item no. 96 above but dia 150mm bore.
All as per item no. 96 above but dia 200mm bore.
M&L brick work with sub class 'B' bricks straight or curved in plan exc 6 mtr mean radius built in CM (1:6) using old size bricks with and including demolition of old brickwork built in cement mortar complete all as specified and directed.
M&L rendering 15 mm thick in CM 1:4 with and including mixing of liquid WPC of approved make @ 200ml per bag of cement on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and fair complete complete all as specified and directed.
M&L rendering 15 mm thick in CM 1:4 with and including mixing of liquid WPC of approved make @ 200ml per bag of cement on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and fair complete with and including taking down cement or lime plaster or racking of pointing and scrubbing out existing finishes on wall of any for three storey bldg incl all necessary arrangement like scaffolding and masonry complete all as specified and directed.
Demolition of reinforced cement concrete of any descritption and in any position not otherwise speccificallt provided for as directed.
M&L for RCC 1:2:4 Type-B1 (using 20mm graded crushed stone aggregate) as in manhole cover slab and similar article with plain faces, set in cement 1:4 complete all as specified and directed.
S&F TMT Mild Steel bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, less than 0.9mm dia or securing with clips complete all as specified and directed.
Material & labour for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling, mass concrete etc complete all as specified and directed.
Material & labour for cement concrete 1:2:4 type B-1 (using 12.5mm graded stone aggregate) as in coping including necessary form work complete all as specified and directed.
Only fixing in repair cast iron pipe 75mm bore fixed with walls complete all as specified and directed.
Only fixing in repair cast iron pipe 100mm bore fixed with walls complete all as specified and directed.
Supply and fixing in repair cast iron pipe 100mm bore fixed with walls complete all as specified and directed.
Supply and fixing in repair cast iron pipe 75mm bore fixed with walls complete all as specified and directed.
Supply & fix in repair cast iron 100mm bore bends any radius complete all as specified and directed.
Supply & fix in repair cast iron 75mm bore bends any radius complete all as specified and directed.
Supply & fix in repair cast iron 100mm Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.
Supply & fix in repair cast iron 100mm bore vent cowl complete all as specified and directed.
Supply & fix in repair cast iron 75mm bore vent cowl complete all as specified and directed.
S&F Aluminium door shutter type consisting of frame and shutter as per specifications given below with Alum beading and rubber gasket of suitable size including fixing of 02 Nos Alum Handle 230mm size, 01 No. Hydraulic floor spring and 2 Nos Alum tower bolt of size 200mm one brass lock with two keys fixed with rawl plug complete incl necessary joining cleats, glazing clips, rubber packaging, snap beading and other builders hardware as required all as specified and directed by Engineer- in - charge:-
S & F Anodised aluminium window powder coated of frame size (100x44x1.5mm) & window shutter size ( 44x44/1.5mm) with 5.5mm thick tinted glass/wire gauge shutter with steel wire mess of 1.10mm dia & aperature 1.40mm with T/bolt 8 No., & butt hinges 8 No., including rubber gasket/aluminium beading on window shutters, complete all as specified and directed
Preparation of old painted wooden or wood based surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed .
Preparation of old painted steel and iron surfaces of any description, over 10 cm width or girth , and applying one coat of synthetic enamel paint complete all as specified and directed .
Material & labour for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
30mm thick flush shutters, solid core construction, with block board core and plywood face one face is covered with decorative face veneer with lippling/frame to match including cupboard partitions/shelves etc complete all as specified and directed.
G N Constructions
M/S RAFIQ AHMAD SOFI AND SONS
M/s Nasir Rasool Dar
M/S M.Y Enterprises
M/S B S CONSTRUCTIONS
M/S B A Traders
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .