SPL REPAIRS TO BLDG NO P-1 OF COCKEREL OFFICER MESS AND CERTAIN MINOR WORK UNDER GE DIPATOLI

Amount

Demolition of brick work built in cement mortar or lime mortar complete of any description, complete all as specified and directed.

M/L Brick work with subclass ‘B’ bricks modular type, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster including racking out joints, hacking for key, scrubing down with water etc, complete all as specified and directed.

M & L for rendering 15 mm thick in cement Mortar (1:4) on the surfaces fair faces of brick work/concrete and finished the surface even and smooth using water proofing compound (wpc) complete as specified and directed. (wpc be measured and paid seperately)

M & L for rendering 5 mm thick in cement Mortar (1:3) on the surfaces of ceilings and finished the surface even and smooth (without using extra cement) using water proofing compound (wpc) complete all as specified and directed. (wpc be measured and paid seperately)

M & L for rendering 15 mm thick in cement Mortar (1:6) on the surfaces of f brick work/concrete/ and finished the surface fair and even complete as specified and directed

M/L preparation of newly / old plastered surfaces of wall and ceiling applying a coat of wall care putty 1 mm thick to make the surfaces truly smooth complete all as specified.

M &L preparing surfaces & applying two coats of distemper oil emulsion over a on already prepared wall (or necessary preparation if required ) complete all as specified and directed.

M &L preparing surfaces & applying two coats of distemper oil emulsion over a on already prepared ceiling (or necessary preparation if required ) complete all as specified and directed.

M/L complete removal of existing treatment on wall surfaces , complete all as specified and directed.

M & L for priming plastered and other surfaces with alkali resistant priming paint over wall complete all as specified directed.

M & L for applying two coats of exterior Emulsion weather proof coat white or tinted on walls complete all as specified directed.

Demolition of cement concrete (unreinforced) of any description and in any position, complete all as specified and directed.

Taking down chowkhat or frame with shutters ( without taking off shutters from the frames) n exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkhat or frame with shutters ( without taking off shutters from the frames) Exc 1.50 Sqm but n exc 4 Sqm Sqm each complete all as specified and directed.

M/L Pressed steel frames for doors (105X60MM) with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

M/L cement concrete type C-0,1:3:6 (12.50 mm graded crushed stone aggregate) as in coping, bed block , water trought and similar works including rounding, chamfered and throting complete all as specified and directed.

S&F flush shutter (40mm thick), solid core construction, with block board core and plywood face panels, commercial type on both sides and fitted to chowkats complete all as specified and directed. complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube S&F in opening all as shown on drawing and complete all as specified and directed..

S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed to gather with solvent cement supplying and fixing in the frame at site as per specification and drawing complete all as specified and directed.

S&F Aluminimum anolised barrel tower bolt of extroded section 150mm long , complete all as specified and directed .

S&F Aluminimum anolised barrel tower bolt of extroded section 100mm long , complete all as specified and directed .

S&F Aluminum handle cast type anodized size 150 mm long, complete all as specified and directed.

S&F Aluminum handle cast type anodized size 100 mm long, complete all as specified and directed.

S&F for MS Butt hinges medium weight, cold rolled Mild Steel for 100 mm size , complete all as specified and directed.

S/F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed (Length of bolt in 300mm), complete all as specified and directed.

S&F framed work such as grills, grating doors or gates etc. of angle iron, flat iron with ends of bars shouldered and or rivetted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings for terrace, framework of water tanks and similar work confirming to Fe 290, complete all as specified and directed.

M&L for preparation of new wood and wood based surfaces and applying two coats of synthetic enamel paints over a primary coat of pink primer over 10cm width or girth , complete all as specified and directed.

M&L for preparetion of new steel surfaces and applying two coats of synthetic enamel paints over a coat of primar with red oxide on new steel surfaces over 10cm width or girth , complete all as specified and directed.

S & F powder coated anodised aluminium window shutter sliding type with frame of powder coated anodised aluminium channel section suitable for sliding aluminium shutters weighing 0.55 Kg/m including necessary joining cleats glazing clips rubber packing powder coated aluminium shop beading screws with two shutter including 5mm thick coloured glass and one shutter with stainless steel wire gauge including aluminium grill of 5.5mm thickness and 55mm opening mesh size weighing 2 Kg/sqm fixed to frame with fastener etc with necessary locking arrangement and handle etc, complete all as specified and directed.

S & F Powder coated anodised aluminium frame of doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, (minimum thickness of powder coating 50 micron), complete all as specified and directed.

S & F powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc, complete all as specified and directed.

Dismantalling of existing water tanks and removinging to store and S&F 500 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed. complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar beding layer all as specified and directed.

M/L double charged vitrified tiles 600x600mm, glossy finish (light shade 8-10 mm thick (square / rectangular) polish as in floor etc set and jointed, joint free and pointed in white or coloured cement to match incl 20 mm thick screed bed in CM 1:6 on concrete surface rough finish to receive tiles of approved shade & colour complete all as specified and directed.

M/L double charged vitrified tiles light shade 10 mm thick (square / rectangular ) polish, area of each tiles not exceeding 0.36 Sqm in size as in dado / skirting etc set and jointed, joint free and pointed in white or coloured cement to match incl 10mm thick rendering in cement mortar 1:4 finished rough to recive tiles complete all as specified and directed.

M & L Rimless single piece EWC floor mounted with soft close seat cover, hinges, fixing accessories and accessories set, cistern fittings, size:- 380x670x765mm, S trap 300mm (or similar size) including necessary fittings etc, complete all as specified and directed.

S&F in repair CP towel rack 600mmx 250mm without lower hangers but three hooks, complete all as specified and directed

S&F in repair CP towel ring square (size:- 21x16x6cm) complete all as specified and directed

S&F chromium plated health faucet with 1 m long pipe complete all as specified and directed.

S & F in repairs vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F in repair CP round soap dish/(minimum weight 100 gm) fancy type, complete all as specified and directed

S&F glass shelf 600mm long in polished chrome finish, complete all as specified and directed

S&F in repair CP robe hook fancy type, complete all as specified and directed.

S&F in repair wall mount frosted glass brush holder in chrome finish, complete all as specified and directed

S&F in repair CP soap dispenser with glass bottle fancy type of size 20.3x13x8.4cm, complete all as specified and directed

S&F in repair CP double arm wall mounted reversible plain/ magnifying (x3) pivotal mirror size 25x278mm, complete all as specified and directed

S&F in repair CP toilet paper holder with flap, complete all as specified and directed

S&F in repair decorative bathroom mirror (finish:- edge polished) size 600x600mm, complete all as specified and directed

S&F in repair 15mm basin mixure fancy type, complete all as specified and directed

S&F corner glass shelf 300mm long in polished chrome finish, complete all as specified and directed

S & F in repairs counter type oval shape wash hand basin, white of size 550x400mm incl. CP waste coupling & PVC waste pipe complete all as specified and directed

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs CP grating 100 dia or above complete all as specified and directed.

S&F in repair Angle valve / stop valve , cast copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore. complete all as specified and directed.

S & F in repair angle stop valve 15mm of CP (2 in 1) of any colour high pressure screwed for iron pipe and fixed, complete all as specified and directed

S&F in repairs Bib taps fancy type cast copper alloy chormium plated 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

M/L Granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, window cills and including 20mm thick screed bed of cm (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

Taking up or down steel tubing and connection of 15 dia bore. complete all as specified and directed.

Taking up or down steel tubing and connection of 20 dia bore. complete all as specified and directed.

M&L 15mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings complete to walls and ceiling or laid in floor complete all as specified and directed.

M&L 20mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings complete to walls and ceiling or laid in floor complete all as specified and directed.

S&F in repairs s/s fancy type curtain rod 25mm bore (including knob and bracket) complete all as specified and directed.

M&L for roof treatment in repair by complete removel of existing old treatment and treated with following specifications :- (a) Brushing neat cement slurry @ 3Kg per Sqm on roof slab. (b) 15 mm thick cement plaster fair finished using cement mortar (1:4) with WPC on roof slab. (c) Applying oil based bitumen primer @ 0.30 ltr/Sqm on plastered surface. (d) Applying modified APP polymeric membrane 3mm thick and minimum weight 3.00 Kg / Sqm for water proofing of roof , sealing as directed at site with 100 mm over laps as per manufacture's instruction. (e) Applying two coat of aluminium paint over bituminous surface of membrane. Note : Supply only WPC shall be measured and paid separately under relevant item.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified & directed.

M&L for 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls excluding clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed.

S & F in repair stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays of 75mm borer of pipe Including bolts and nuts and securing ends of stays to wall or roof, complete all as specified & directed.

S & F in repair stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays of 100mm borer of pipe Including bolts and nuts and securing ends of stays to wall or roof, complete all as specified & directed.

M&L for 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints,laid in trenches or in floors or wall complete all as specified & directed.

M&L PVC (SWR) bend /reducer any radius 110mm dia complete all as specified & directed.

M&L PVC (SWR) bend / reducer any radius 75mm dia complete all as specified & directed.

M&L PVC(SWR) Tee any radius 110mm dia complete all as specified & directed.

M&L PVC(SWR) Tee any radius 75mm dia complete all as specified & directed.

M&L PVC(SWR) Vent cowl 110mm dia complete all as specified and directed.

S&F 75mm dia bore branch piece, single (equal or unequal) , ordinary or inverted, spigot or socket type or with parallel branches complete all as specified and directed.

S&F 100mm dia bore branch piece, single (equal or unequal) , ordinary or inverted, spigot or socket type or with parallel branches complete all as specified and directed.

Supply only integral water proofing compound, complete all as specified and directed.

M&L for 100 mm thick PCC (1:4:8), type D2 (using 40mm graded stone aggregate) as in sub base to floor, complete all as specified and directed.

M&L pre-polished chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments over 15mm thick screed bed in CM (1:6), complete all as specified and directed.

M&L Providing cement concrete type B-1,1:2:4 (using 20 mm graded agg) as in benching concrete,coping etc, complete all as specified and directed.

Excavating in post holes each not exc 0.5 Cum getting out any type of soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exc 50m and making good surface, complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed.

M & L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in foundation filling mass concrete and packing of post etc , complete all as specified and directed.

M&L RCC 1:1.5:3 Nominal mix using 20 mm graded aggregate for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed.

Formwork rough finished flat surfaces of concrete to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specified and directed.

M&L RCC 1:1.5:3 Nominal mix using 20 mm graded aggregate for Columns, pillars, piers, posts and struts, complete all as specified and directed.

Formwork Square/Rectangular to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:4) with using WPC (WPC shall be measured seperetly)on wall finishing the surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint over a coat of primer complete all as specified and as directed.

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm thick each layer as in soil complete all as specified and as directed.

Removing excavated material/soil to a distance not exceeding 50 M and depositing wheredirected at a level not exceeding 1.5M above the starting point complete all as speecified and as directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and directed.

M & L for mild steel angle, flat work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or rivetting etc conforming to Fe-290 Gde E-165, complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exc 5cm but n.exc 10 cm long dia of neck in mm 11 mm to 15 mm, complete all as specified and directed.

M&L Mild steel Round bars 10mm dia and over for chainlink fencing, cut to length, bent to shape required, including cranking, bending ,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and gaides) and hanging, also fastening and fixing complet of FE - 410W , complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, complete all as specified and directed.

S&F in repair MS galvanised chain link fencing with exc 3mm dia wire of 75 x 75 mesh size any type standard fixed with angle iron post and MS flat , complete all as specified and directed.

S&F in repair galvanised 2 strand, steel barbed wire 2.2 mm dia barbed wire with 2 mm dia barbs at 75 mm spacing and straining and fixing , complete all as specified and directed.

M&L for preparing new or previously untreated surfaces, of steel and iron work of any description not otherwise described not exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

M & L Preparation of new steel surfaces over 10cm width or girth and priming with red oxide primer and painting with synthetic enamel painting two coats, complete all as specified and directed.

M & L , PCC (1:2:4), type B-1 using 20mm graded stone aggregate as in coping etc incl weathering, slightly rounded or chamfered and throating with necessary form works complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed.

Excavating in post holes each not exc 0.5 Cum getting out any type of soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exc 50m and making good surface, complete all as specified and directed.

M & L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in foundation filling mass concrete and packing of post etc , complete all as specified and directed.

M&L RCC 1:1.5:3 Nominal mix using 20 mm graded aggregate for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed.

Formwork rough finished flat surfaces of concrete to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specified and directed.

M&L RCC 1:1.5:3 Nominal mix using 20 mm graded aggregate for Columns, pillars, piers, posts and struts, complete all as specified and directed.

Formwork Square/Rectangular to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and directed.

M&L RCC 1:1.5:3 Nominal mix using 20 mm graded aggregate for Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed.

Formwork flat to sides and soffits of floor or roof beams, beam haunch?ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc, complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm thick each layer as in soil complete all as specified and as directed.

Removing excavated material/soil to a distance not exceeding 50 M and depositing wheredirected at a level not exceeding 1.5M above the starting point complete all as speecified and as directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and gaides) and hanging, also fastening and fixing complet of FE - 410W complete all as spd.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

S&F for Rolled mild steel work FE-410-W (Gde E-250) Quality-A in main and cross beams, hip and jack rafters, purlin where commected to common rafter and similar work all as specified and directed.

S&F for Steel work in tubular trussesFE-410-W (Gde E-250) Quality-A including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 all as specified and directed.

S&F for Plates (plain or chequered) FE-410-W (Gde E-250) Quality-A channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachmen, complete all as specified and directed.

S&F Mild steel screw bolts (machine made) 5 to 10mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,exc 5cm but 10cm long, complete all as specified and directed.

S & F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

S & F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M & L Preparation of new steel surfaces over 10cm width or girth and priming with red oxide primer and painting with synthetic enamel painting two coats, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for pressed precast concrete interlocking paver block any shape and size confirming toIS 15658-2006 of 60mm thick M-35 grade with gray cement and pigment complete all as specified and directed, complete all as specified and directed.

M&L Sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed.

M & L , PCC (1:2:4), type B-1 using 20mm graded stone aggregate as in coping etc incl weathering, slightly rounded or chamfered and throating with necessary form works complete all as specified and directed.

M/s Kundu Enterprises (BID ID -3144883)

M/s Mukesh and company (BID ID -3146991)

universal enterprises (BID ID -3138664)

M/s Animesh Kumar & Co. (BID ID -3146057)