PROVISION OF TOILET BLOCK WITH SEWAGE SYSTEM NEAR BLDG NO CB 364 AND DL 20 AND SEPTIC TANK BEHIND SINGLE OR LIVING CB 315 IN DEMO Bn AT INF SCHOOL UNDER GE MIS MHOW

Amount

B/R Works :-

Excavation in trenches not exceeding 1.50 m wide and not exceeding 1.5 m in depth and getting out in any type of soil for shafts, wells, manholes and for sewage lines and foundation etc not exceeding 10 Sqm on plan complete all as specified.

S&F Reinforced concrete pipes class NP-2 laid and jointed complete with collars for the following bores :-

100mm dia

150mm dia

200mm dia

M&L for concrete bed in PCC 1:4:8 type D2 using 40 mm graded stone aggregate for drain pipes bedding & haunching against the sides of the pipe,laid and jointed all as specified testing after lon completion all as specified for following pipe :-

100 mm dia

150mm dia

200mm dia

Returning filling in soil including spreading leveling watering and well ramming in layers not exceeding 25 cm thick all as specified

Removing excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding. 1.5 m above the starting point complete all as specified.

M&L for Precast Reinforced Cement Concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in cover slab of manhole and laid and jointed with cement mortar 1:4 complete all as specified. Note : Reinforcement shall be measured and paid separately under relevant item.

M&L for TMT bars 6mm to 8 mm dia cut to length bent to shape required including cranking, bending, hooking ends and binding with MS wire (annealed) not less than 0.9 mm dia complete all as specified.

Demolition of brick work built in cement mortar in any position including all quoins, arches & pillars etc. complete all as specified.

M&L for brick work with fly ash brick using modular size brick, straight or curved on plan exceeding 6m mean radius built in CM 1:6 complete as specified

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete all as specified

M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in coping for manhole including slightly rounded or chamfered angles including necessary form work finishing exposed surface complete all as specified.

M&L for rendering 15mm thick in CM 1:4 on brick or concrete surface of wall including finish the surface even and smooth without using extra cement. complete all as specified .

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for 150 mm internal dia of pipe complete all as specified.

M&L for 300 users RCC Septic tank (conventional) designed to carry sewage and sludge water with effective depth of 1.5 meter and over all depth of 3.0 meter including excavation in any type of soil, PCC 1:4:8 type D2 foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

M&L for construction of soakage well of size 3 metre dia X 3.0 metre effective depth including excavation in any type of soil ,PCC 1:3:6 type C2 foundation , walls of honey combed masonry with top ring of M25 grade concrete including intercepting chamber and screen chamber with brick masonary in cement mortar 1:6, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with and including brick bats complete all as specified and shown on drawing and as directed by Engineer-In-Charge.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft / loose soil.

M&L for plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work , vertical or to batter, rough finished surface of concrete complete all as specified

M&L for RCC M-25 grade concrete (using 20mm graded aggregate) as in foundation, footings, plinth protection and similar RCC works all as specified. Note : Reinforcement shall be measured and paid separately under relevant item.

M&L for formwork to sides of concrete flat or curves, sides of pillar, posts, struts,piers,columns and stanchions rough finished surfaces of concrete complete all as specified .

M&L for RCC M-25 grade concrete (using 20mm graded stone aggregate) as in column,pillar, piers,posts and struts all as specified .Note : Reinforcement shall be measured and paid separately under relevant item.

M&L for form work to sides and soffits of floor or roof beams haunching, lintel, column, cantilevers shelves includig supported over hangs etc with rough finished flat surfaces of concrete complete all as specified

M&L for RCC M-25 grade concrete ( using 20mm graded stone aggregate) as in beams,cantilevers.brussumers,lintels more than 1.50 span all as specified Note :Reinforced shall be measured and paid separately under relevant item.

M&L for use and waste of formwork to sides and soffits of slab such as roof slab,floor slab,landing and similar work etc not exceeding 200mm thick with rough fnished surface of concrete flat complete all as specified.

M&L for RCC M-25 grade concrete (using 20mm graded stone aggregate) as in slab supported on wall , landings, beams canopies, deck slabs and shelves etc. complete all as specified. Note: Reinforced shall be measured and paid separately under relevant item.

M&L for mild steel TMT bars10mm dia and over cut to length bent to shape as required including bending cranking and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified

All as per item No 32 above but 5 mm to 10 mm dia as in stirrups,spaces & binders complete all as specified.

M&L for moorum / Red bajri filling in floor or paving laid in layers not exceeding 15cm thick spread,levelled and rammed including watering complete all as specified.

M&L for hardcore with broken stone or boulders of gauge not exceeding 63mm, deposited spread and levelled in layers not exceeding 150mm thick, watered and rammed to true surface complete all as specified.

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in sub-base, floor and footh path including necessary formwork as required complete all as specified.

M&L for PCC 40mm thick cement concrete 1:2:4 type B0 (using 20mm graded stone aggregate) as in floor, leveling course complete all as specified.

M&L for screed bed or bedding layer 20mm thick for laying floor tiles in cement mortat 1:6 finished even and rough all as specified .

S&F Non Skid ceramic coloured tile 7 to 8mm thick (Square/Rectanguler ) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm in floors , set and jointed in neat cement slurry and pointed with coloured cement to match with colour of tiles all as specified .

S&F Glazed ceramic glossy series digital wall tile of size 300X450mmX7mm thick coloured on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile including 10mm thick rendering of CM 1:4 all as specified.

M&L for rendering 15 mm thick on unfair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement all as specified.

M&L for rendering 15 mm thick on unfair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with water proofing compound @ 200ml by weight of cement per 50 kg bag, finished even and smooth without using extra cement NOTE : WPC shall be measured and paid separately.

Supply only liquid water proofing compound

M&L for 75 mm thick, PCC 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection and paving finished the concrete surface even and smooth without using extra cement all as specified

S&F Powder coated anodised aluminium ventilator ( Louvers type) with louvers glass and glass stay,section weighing 0.55Kg/m including necessary joining cleats, glazing clips for fixing of wiremesh,rubber neoprene packing,anodised aluminium snap beading screws etc.(minimum thickness of powder coating 50micron) complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube all as per specification and directed.

S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F Aluminium anodised barrel tower bolts of extruded section of length 150mm and fixed all as specified

S&F 150 mm long Aluminium handles, cast type, anodised all as specified

S&F Butt hinges of 100mm size, medium weight, cold rolled, mild steel and fixed.

S&F Aluminium alloy,anodized sliding door bolt of length 250mm with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed all as specified

S&F PVC Pipes 110mm dia bore single socketed,in any length with rubber ring joints, laid in floors all as specified

S&F PVC (SWR) bends any radious 110mm

S&F 75mm dia PVC (SWR) multi floor trap plain with grating including jointing with solvent cement all as specified

S&F 100X100mm size Salt glazed stoneware gully trap,square or round mouthed "P" type all as specified

S&F PVC Pipes 75mm bore single socketed,in any length rubber ring joints,laid in floors all as specified

S&F PVC (SWR) 75mm bore bends all as specified

S&F GI tubes 15 mm dia medium grade with all fitting fixed complete to walls and ceiling or in floor all as specified

All as per tem No 58 but 25mm bore

S&F 25mm dia Gun metal valve globe or gate valves with iron wheel head,screwed both ends for iron pipe and fixed

S&F Rotational moulded polythene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I

S&F 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass complete all as specified.

S&F 'P' or 'S' trap for EWC all as specified

S&F vitreous china wash down water closet pan ( Pedestal pattern),white( excluding fixing bolts,flushing cistern and flush pipe) complete all as specified and directed

S&F 15mm bore chromium plated two way bib cock with flange fancy type,cast copper alloy,screwed down,high pressure,with crutch or butterfly handle,scrwed both ends for iron pipe or for unions complete all as specified.

S&F 15mm bore chromium plated health faucet including flexible pipe 1.00 m long wall mounted and brass CP nuts complete all as specified

S&F PVC valveless syphonic action type flushing cistern 10 litres capacity low level white,with inlet ball valve, float and handle including brackets all as specified

S&F vitreous china wash basin white (oval shaped under counter) of size 550mmX400mm compete all as specified

S&F 15mm dia swan neck pillar taps fancy type,cast copper alloy,with capstain heads,chromium plated screwed down high pressure,with or without lettered 'HOT' or 'COLD" with long screwed shanks and fly-nuts screwed for iron as specified

S&F waste fitting 32mm bore,brass,chromium plated for basins with long screwed shanks and fly-nuts.flange complete all as specified

S&F PVC waste pipe suitable for wash hand basin/urinals.

S&F PVC connection 15mm size with PTMT nuts of length 450mm

S&F granite (of any type) stone slab of 20mm thick machine cut,bedded and jointed with grey cement slurry and pointed with white cement mixed with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified

S&F CP Fancy type Angle cock one way, brass chromium plated, fixed to iron pipe or for unions 15mm bore complete all as specified

S&F bib taps cast copper alloy chromium plated with crutch or butterfly handle,fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified

S&F brass chromium plated tubuler towal rail,20mm dia D type 60cm long between flanges all as specified

M&L rendering 10mm thick in cement mortar 1:3 on concrete surfaces in ceiling finished even and smooth without using extra cement all as specified

M&L for preperation of new plastered surfaces of ceiling and applying three coat of white wash all as specified

M&L for applying evently a tack coat of industrial bitumen 25/85 grade at the rate of 1.20Kg per sqm including cleaning surfaces complete all as specified .

M&L for laying of APP based polymeric membrane minimum weighing 3 kg/sqm, minimum 3mm thick reinforced with polyster non woven fabric (weight not less than150gms/sqm) laid on priimed surface by forced torch application complete all as specified and directed.

M&L for applying two coats of bitumen based aluminium painting over a coat of primer on water proofing treatment including preparation of surfaces complete all as specified .

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of wall care putty complete all as specified

M&L for 1mm thick white cement based wall care putty wherever required complete all as specified.

M&L for preparation of newly plastered surface of wall, pillasters, cornices etc and applying two coats of Anti fungal weather coat acrylic emulsion paint over a coat of primer (X2) complete all as specified Make : (a) Asian (Apex ultima).berger weather coat all gaurd.ICI Dulex (Weather sheild Max), Nerolac (Excel total) Make of primer : Asin (X2) or Equivalant Note : (a) Each stages i.e Preparation, primer application, First coat and second coat of Apex shall be passed by Engineer-in-Charge (b) Written warranty for four years shall be funished by the contractor for this item.

M&L for machine pressed precast concrete interlocking paver block using rubberised moulding any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 Grade with grey cement and no pigment over sand cushioning complete all as specified and directed.

M&L for stone dust under floors or in foundation including watering and consolidation spreading and levelling in layers not exceeding 25 cm thick all as specified

M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggrgate) as in mud stops.kerbs etc rounded or chamfered edges all as specified

M&L for construction of sockage well of size 3.0 m Dia X3.0 m deep including excavation, in ordinary soil,foundation in PCC 1:3:6, walls of Honey combed build in CM 1:4 and solid in M-25 concrete,including intercepting chamber,screen chamber with brick work in CM, RCC cover slab in M-25/ filling with brick bats, complete all as specified in TD-DRG NO CEJZ/TD/sheet No 1/1 dated 05/05/2000

M&L for construction of septic tank for 100 users including excavation, in ordinary soil,foundation in PCC 1:2:4,brick work in CM 1:4 Slab covers with RCC precast manholes cover having 6mm plate embedded all around / Fibre reinforced cover with angle iron frame ,vent shaft and sludge chambers etc. complete, all as specified in TD-TRG NO CEJZ/TD/57 sheet No 1/4 to 4/4 dated 05/05/2000

M&L for on site LDPE septic tank for 30 users (conventional) designed to carry sewage and sludge water including necessary excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc., complete all as specified and directed.

S&F FRC manhole cover including rectangular frame of size 44''X26'' md-10 complete all as specified.

M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in drains and surface channels and finished even and fair complete all as specified

M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, initred/stopped ends complete all as specified and directed.

E/M Works:-

M&L for Point wiring with FRLS PVC insulated PVC unsheathed electric cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area drawn in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good and matching disturbed surface of wall with existing surface of wall (cutting except on ceiling for fan point only, on ceiling instead of PVC conduit surface casing caping will be used) & 1.5 sqmm green FR LS PVC insulated unsheathed copper conductor as earth wire connected to earth dolly by providing lugs including galvanised boxes and bakelite sheet for mounting switches, sockets, fan regulators etc for One light point/fan point controlled by one switch . Make of PVC conduit/Casing Caping:- Plaza/Finolex/Polycab/Kalinga/Jindal/Asian.

One light point controlled by one switch

One Exhaust fan point controlled by one switch

One 5Amps socket out let point controlled by one switch on same board with other switches.

One 5Amps socket out let point on independent board controlled by one switch.

All as per item No 95 here in before but using PVC insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 2.5 Sq mm green PVC insulated cable for 15 Amps socket point on independent board controlled by one switch.

S&F switch piano flush button single pole one way 6 Amp 240 volt

S&F socket outlet flush type 5 pin, 6 amps, 230 volts

S&F switch piano flush button single pole one way 15 Amp 240 volt

S&F socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts

S&F ceiling rose surface bakelite three terminal

S&F integrated LED tube light fitting 1x18/20 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square boxes complete all as specified . Make:- Havells Cat No. LHEXBLP7PN1W018 , Bajaj cat Pt No. BCLSB 18WH or other equivalent in Wipro

S&F integrated LED tube light fitting 1x9/10 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square box complete all as specified. Make:- Havells Cat No. LHEXBLP7IN1W009 Bajaj Cat Pt No. BCLSB 10 WH or equivalent in Wipro

S&F LED street light fittings 1x30 Watt, 5700K complete fitting having pressure dia cast aluminium housing with heat resistant toughened glass & IP 65 protection fixed on and including sufficient length and appropriate size GI bracket with all accessories duly connection with three core flexible copper cable complete all as specified Make:- Havells Cat No.LHEXAYP7PN6K030 Crompton Cat No. LSTO-25-CDL, Bajaj Cat No. BCLST 25W LED IV2

S&F double door SPN DBs eight way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified.

S&F MCB SPN 6 to 32 Amps 10 KA, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified.

S&F MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified.

S&F Exhaust fan 300mm sweep, AC single phase 230 Volts, metallic type, complete with louver including electric connection with suitable size copper conductor cable, clamps, nuts, bolts etc including making hole of appropriate size in the existing brick wall and making good the disturbed wall to match with the existing surface of wall complete all as specified and directed by Engineer-in-Charge. Make : Havells Model: Ventil Air-DX white or equivalent in /Bajaj/Crompton.

M&L for Earthing complete with galvanized steel earth plate electrode 60cm x 60cmx 6.3 mm thick buried directly in ground ( earth pit not less than 2.25 meter deep below ground level) with the top edge of the earth plate not less than 1.5 meter below normal ground level connected to galvanized earth lead wire 4mm dia by means of bolts, nuts, check nuts and washer of galvanized iron or of steel all as shown in electrical plate No.5 of MES SSR parts-I and including excavation & earth work in any type of soil , disposal of soil , providing alternate layers of charcoal and common salt, construction of PCC earth chamber in mix 1:3:6 type C1, 40 mm thick RCC 1:2:4 type B1 cover slab reinforced with 8mm dia MS bars both ways with lift hook made out of 8 mm dia bar, watering arrangement with funnel and wiremesh and watering pipe of 20mm dia GI light grade and 15mm dia light grade pipe for earth lead protection and testing on completion complete all as specified and directed.

Supply and laying LT cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 2 core 10 Sqmm

Supply ,laying and jointing GI pipe 'light grade' 40 mm bore in trenches/under floors or roads/ along poles/ on wall including clamps for protection of cables including fittings complete all as specified

M&L for clean and dry sand (un-washed) in trenches including spreading and levelling for cushioning of UG cable complete all specified.

supply and laying of reinforced precast concrete cable cover class LV Type I flat size ,250mmx150mmx40mm.

APconstruction

M/S Sunshine Construction

M/S UnitedConstruction

PRABHAT SINGH PARMAR