REPAIR TO HARDSTANDING FOOT PATH DRAIN AND CERTAIN MISC WORK AT MD AND OTM ACCN PXE UNDER AGE B AND R I CHANDIPUR

Amount

Demolition of brick work or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar complete all as specified & directed.

M&L for Brick work with flyash bricks old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 etc complete all as specified & directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings, etc. n exc 15cm thickness (below or above ground level) as in surface channel, coping etc. and removing debris and rubbish out of the premises complete all as specified & directed.

M&L for plain cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in bed concrete for drain, Surface channel and finishing the cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

Extra for forming fair finished of drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped

M&L plain cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in coping kneelers, apex stones, bed plates, kerbs, etc. complete all as specified and as directed.

M&L for 75mm thick plain cement concrete1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection including providing 10mm thick joints filled with bituminous & sand mixture (1:7) at not exc 3.00 mt intervals & at corners and finished even and smooth without using extra cement including demolition of existing concrete complete all as specified and as directed.

M&L for 100mm thick plain cement concrete(1:3:6) type C-2 (using 40 mm graded stone aggregate) as in Path / PCC floor and hard standing, finished even and fair including demolition of existing concrete complete all as specified and as directed.

M&L for 25 mm thick precast Cement Concete louvres and jalli 1:3:6 (Nominal Mix) type B-0 using 12.5mm graded stone aggregate, set in Cement Mortar (1:4), including all moulding but excluding frame including demolition of old jalli complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces of wall finished even & smooth complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for Precast Reinforced Cement Concete 1:2:4 (Nominal Mix) Type B-1 using 20 mm graded stone aggregate as in cover slabs set in Cement Mortar (1:4) including necessary form, mould work, etc. complete all as specified and as directed.

M & L Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and as directed.

M&L for 15 mm thick screed bed or bedding layer for laying floor finishes in cement mortar 1:6 complete all as specified and as directed.

M&L for 25 mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded aggregate as in sub base complete all as specified and as directed.

M&L granite slab (of any type) 20 (+/-2)mm thick machine cut bedded and jointed with greay cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including cutting and polishing incl 15 mm thick screed bed or bedding layer for laying floor finishes in cement mortar 1:4 complete as in pillar,steps etc complete all as specified and as directed.

M&L Paving vitrified parking tiles 300 mm x 300 mm x 12 mm thick (heavy duty), set, jointed and pointed in neat cement slurry as in foot path with white cement and pigments complete all as specified and as directed.

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm /40cmx40cmx25mm thick, pre-polished set, jointed and pointed in neat cement slurry with grey/colour cement and pigment in floors complete all as specified and as directed.

Taking down and Refixing of MS/SS steel gate including necessary repairs / replacement/Welding of parts if required , repairing hold fast and greasing in joints of hinges etc including making good the disturbed surface of brick / RCC wall in existing complete all as specified and directed.

Dismantling Fencing wire mesh, any type complete all as specified and as directed.

Supply Only PVC coated MS galvanised chain link fencing of 2.00 mm dia GI wire and outer dia 3 mm mesh size 75 x 75 mm (including thickness of PVC coating) approved quality complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out emebedded portion of concrete, brick work, masonry and making good disturbed ground complete all as specified and as directed.

Excavating in post holes not exc. 0.5 cum in each and getting out in soft / loose soild and removing surplus soil to a distance not exc. 50 mtr and making good the surface complete all as specified and as directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filing and mass concrete complete all as specified & directed.

M&L for Providing reinforced cement concrete (nominal mix) type B-I, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 100 sq. cm but n. exc 250 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred topes and including reinforcement complete all as specified & directed.

S&F for flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, including Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both end each screwed end to be fitted with washers and one hexagonal or square nut and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F for mild steel bars round bar 10mm dia and over, cut to length, bent to shape required for securing chain link fencing of grade Fe-410-W(Gde E-250) quality A complete all as specified and as directed.

M&L for one coat of synthetic enamel paint to steel surfaces of any description not otherwise described not exc 10 cm width or girth including preparation of new surfaces of steel complete all as specified and directed.

Complete removal of trees/plants/vines/climbers on vertical face of chain link fencing/compound wall and removing the plant waste to a distance n.exc 50m complete all as directed .

M&L for two coats of Premium Acrylic Smooth exterior paint with Silicone additives of required shade over and including priming coat of exterior primer including preparation of new plaster surface of wall complete all as specified and directed.

Complete removal of existing treatment and Washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of Premium Acrylic Smooth exterior paint with Silicone additives of required shade@ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed.

M&L for two coat of synthetic enamel paint to steel surfaces of any description not otherwise described over 10 cm width or girth including Ppreparation of old painted surfaces of steel complete all as specified and directed.

S&F in repairs to joints of chequered cement concrete tiles and parking tiles using white/colour cement including racking out old cemet joints complete all as specified and directed.

M&L for one coat of synthetic enamel paint to steel surfaces of any description not otherwise described not exc 10 cm width or girth and preparation of old painted surfaces of steel complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

Supply and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc, of required size, on the top of the floor or the side of waist slab, grill work with suitable arrangement as per approval of GE.

M&L for removal of all contaminants such as dirt, grease, oil, dust etc with soap powder solutionusing a scrubbing brush or by scrapping, sand papering on foot path and preparing the surface smooth including necessary repairs to scratches with pointing, etc and applying one coats of apex floor guard paint (applied @ 3.10 ltr/10 sqm) as per the direction/instruction of manufacturer with necessary tools complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 grade with grey cement & pigment complete all as specified and as directed.

M&L for 25 mm thick sand filling under precast concrete inter locking paver floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for 100 thick plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and as directed.

DANWAR AND ASSOCIATES (BID ID -3229323)

M/S T.N.CONSTRUCTION (BID ID -3234988)