Bloomfield School repair works B.F. Cess Road, WARD NO 05, DARJEELING UNDER APASHGHS

ELECTRICAL

Supplying and fixing PVC casing-capping [Precision Make] on wall or ceiling, incl. necy. PVC fittings etc. and mending good damages to building works. b)25x10mm Size

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish.

(b)Average run 6 mtr

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.

Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required.

s)2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC for switch Board and other

b)3 x 22/0.3 (1.5 sqmm) for Light Point

Supplying and fixing of 2 Core 10sqmm PVC/XLPE Insulated Un-Armoured Cable A2XWY/A2XFY .(HSN/SACP:85446020/ 6090 :IS 1554/7098(PART-1)/1988

Finishing the end of following XLPE/PVC armoured cables byncrimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

iii)2 core 10 sqmm cable

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : a)For 2 core upto 10 sqmm

Supplying and fixing 2+12way double-door SPN MCB Distribution Board with IP-42/ 43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size ofcopper wire and neutral link & provision for earthing attachment.Make -Legrand

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.40A SP (Legrand)

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection.63 A DP(Legrand)

Supplying of LED ADORE 10W B22 CDL 3 STAR LAMP 6500K HSN Code: 8539.

Supplying of HIGH WATTAGE 36 W LED 6500 K (ALUMINIUM BATTENS) Decorative ultra slim aluminium LED lighting fixture with high lumen output, environmental friendly, energy efficient ready to use pack.

Fixing only single/twin fluorescent light fitting complete with all accessories directly on wall/ceiling by screws etc.

Supplying only switches ,mounting boxes and front plates.

Front plates

c) 6-8 Module

Mounting Boxes

c) 6-8 Module

a)16 Amp one way switch

Supplying of only Ceiling Rose SAP Code: AHLHXCW000 (Havells Make)

Supplying of only Batten Holder Fancy with Plate (Metal Ring) SAP Code: AHNHTLW002 (Havells Make)

Sundry(White cement,Tee,Elbows, Self Drilling Screws,Drywall Screws, Nut Bolt ,compression glands, Aluminium Lugs,GI Wire)etc.

Supplying and Delivery of 70watt LED Street Light in Existing Poles (Havells/Equivalent Make)7

Fixing outdoor type fluorescent/SV/MV light fitting on poleincluding S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 2x1/1.40 PVC insulated & sheathed wire (single core) partly in GI conduit & partly through above bracket from OH line to the fitting, without control switch, incl. making connections and painting[PWD Sch.H-5 Item No.03]

Add Labour Welfare Cess @1%

Civil

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be corrected upto three decimals). (i) Sal : Siliguri. 1st Floor

Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. (In case of non-supply of single plank, panel rate of reduction of 20% will be made). (ii) 40mm thick shutters with 19mm thick panel of size 30to 45 Cm. a) Ordinary Teak Wood.

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. iv) 5mm thick coloured / tinted / smoke glass.

Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) (b) 40mm x 6mm 200 mm length

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (viii) 100mm. X 75mm. X 3.50mm.

Anodise aluminium barred/tower/socket bolt (full covered) of approved manufactured from extruded section conforming to I.S.204/74 fitted and Fixed with cadmium plated screws: (vi) 200mm long x 10mm dia. bolt.

Anodise aluminium Aldrop/Sliding bolts of approved quality manufactured form extruded section conforming to I.S. specifictation (I.S.2681/66) fitted and fixed complete. (iv) 300mm x 19mm dia. bolt.

Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S.230/72) fitted and fixed complete: (a) With continuous plate base (hexagonal/round rod). (vii) 150 mm grip x 12 mm dia rod.

ii) Godrej Hydraulic door closer fitted and fixed complete. (b) Medium type

(ii) Door stopper (Anodised aluminium)

(b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

(A) Painting with best quality synthetic enamel paint of approved make aand brand including smoothening surface by sand papering etc. including using of approved putty etc on the surface , if necessary. (a) On timber or plastered surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white)

Labour Welfare cess @ 1%