REPAIR TO PLUMBING SANITARY FITTING SWR PIPES CHAJJA FLOORING MASONARY JOINERY ELECTRICAL FITTINGS FIXTURES AND PERIODICAL SERVICE WELCOME MAINT OF MD JCOS OR QTRS AT ARMUGAM ENCLAVE PATHAK ENCLAVE AND DEFENCE CIVILIAN COLONY UNDER GE I GOS

Amount

Taking down chowkhat or frames n exc 1.50 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhat or frames exc 1.50 Sqm and n exc 4 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down shutter of any description not exceeding 1 sqm each complete all as specified and directed.

Taking down shutter of any description area exceeding 1 sqm but n exc 2 sqm each complete all as specified and directed.

Taking down shutter of any description not exceeding 1 sqm each leaf and refixing, in same opening after easing and adjusting building hard ware etc complete all as specified and directed.

Taking down shutter of any description exceeding 1 sqm but not exc 2 Sqm each leaf and refixing, in same opening after easing and adjusting building hard ware etc complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube in opening as per specification and shown on drg SSR Part-II 2010.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rails lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, as per specification and shown on drawing in SSR Part-II (2010).

M & L 2nd class hard wood plain solid straight chowkhat & frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints omplete all as specified and directed.

S & F 35 mm thick 2nd class hard wood plain framed panelled shutter (of any no of panel) with panels of timber flat on both sides (feather edged) or veneered particle board medium density, wood particle board with commercial face veneered ; supplied and fitted to chowkhats etc complete all as specified and directed.

M & L 35 mm thick 2nd class hard wood glazed and Skelton shutters open rebated and prepared to receive glass, gauge etc. but divided into squares, with plain, chamfered or rounded mitered and rebated sash bars any numbers, size of members of shutter as specified in SSR Part –I section 8, claused 8.24 (a) complete all as specified and directed.

M & L 30 mm thick 2nd class hard wood glazed and Skelton shutters open rebated and prepared to receive glass, gauge etc. but divided into squares, with plain, chamfered or rounded mitered and rebated sash bars any numbers, size of members of shutter as specified in SSR Part –I section 8, claused 8.24 (a) complete all as specified and directed.

M & L for framed work such as grills, gratings, etc with ends of bars shouldered and/or rebated, or forged into spikes, framed guard bars, barred iron doors, ladders, railing etc complete all as specified and directed.

S & F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed.

S & F 100 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 200 mm mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

S & F 150 mm long aluminium handles cast type, anodized complete all as specified and directed.

S & F 100 mm long aluminium handles cast type, anodized complete all as specified and directed.

S & F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S & F 125 mm butt hinges, mild steel medium weight cold rolled complete all as specified and directed.

S & F 100 mm butt hinges, mild steel medium weight cold rolled complete all as specified and directed.

S & F 75 mm butt hinges, mild steel medium weight cold rolled complete all as specified and directed.

S & F in repair 150 mm long aluminium anodized handles fabricated type complete all as specified and directed.

S & F in repair 100 mm long aluminium anodized handles fabricated type complete all as specified and directed.

S & F in repair 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed.

S & F in repair 100 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F in repair 100 mm butt hinges, mild steel medium weight cold rolled complete fixing complete all as specified and directed.

S & F in repair 75 mm butt hinges, mild steel medium weight cold rolled complete fixing omplete all as specified and directed.

S & F in repair 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S & F MS work as in hold fast/clamps including nut & bolts iron screw for hold fast confirming to FC 290 Gde E-165 complete all as specified and directed.

M & L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate for fixing of hold fast/benching/any type etc complete all as specified and directed.

M & L for running welding in reapir of n exe 6 mm metal complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) form wooden frames or stone, concrete or brick surrounds glazed with oil putty or fixed with beads complete all as specified and directed.

S & F 3 mm thick sheet glass/sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S & F 3 mm thick figured glass pin headed type and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S & F in perforated Stainless steel wire cloth for mosquito proofing, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified and directed.

S & F in repair perforated stainless steel wire cloth for mosquito proofing, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with staples complete all as specified and directed.

Taking down cupboard door of any description in any position complete all as specified and directed.

M & L prelaminated particle board 18-19 mm thick, interior grade prelaminate one side with decorative choice lamination fixed with screw to timber frame work complete all as specified and directed.

S & F continuous (piano) hinges of width of flaps (when open) 30 mm, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S & F 2 nd class wood beading fixed in position with nail area exc 3 Sqcm and not exceeding 6 sqcm complete all as specified and directed.

S & F magnetic catcher with nut and screw of mild steel bright finish all as specified and directed

S & F 40 mm dia cupboard knob fixed with nuts screw and washer of mild steel bright finish complete all as specified and directed.

S & F hasp and stapple safety type aluminium anodised 100 mm long with mild steel hinge pin including bolt to hinge plate fixed with screw complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off premises complete all as specified and directed.

S & F non skid coloured ceramic tiles 300 X 300 X 7 to 8 mm thick (coloured or printed) in floors etc set and jointed neat cement slurry and pointed in white or colour cement to match the shed of tiles including screed bed or bedding layer 15 mm thick in cement mortar 1:6 complete all as specified and directed.

S & F non skid coloured ceramic tiles 400 X 400 X 7 to 8 mm thick (coloured or printed) in floors etc set and jointed neat cement slurry and pointed in white or colour cement to match the shed of tiles including screed bed or bedding layer 15 mm thick in cement mortar 1:6 complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surfaces 350X250X7/450X350X7 MM thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including rendering fair faces of brick work 10 mm thick in CM 1:4 complete all as specified and directed.

M & L for 25mm thick PCC 1:2:4 using 12.5 mm graded stone aggregate as in levelling course complete all as specified and directed.

M & L in repair Granite (of any type) tiles 18 - 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl grinding and polishing complete incl 15 mm thick screed bed or bedding layer with CM (1:6) etc complete all as specified and directed.

Denolition of brickwork built in cement or cement lime morter including all quoins, arches pillar ect complete all as specified and directed.

M&L brick work with flyash bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1.6 complete all as specified and directed

Taking down cement or cement lime plaster, of any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished fair and even complete all as specified and directed.

M & L for Rendering 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished fair and even complete all as specified and directed.

M & L for preparation of new plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M & L for preparation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and directed.

S & F in repair floor door stopper of aluminium alloy body and tongue, anodised, over all length of cover plate 140 mm with hard drawn steel spring fixed in door etc complete all as specified and directed.

S & F in repair sheet Glass Shelf assembly consisting of 5.5 mm glass sheet shelf 12 cm wide with cromium plated bracket guard and railing 60 cm long complete all as specified and directed..

Taking up or down steel tubing and & connections including and making good the disturbed surfaces 15 mm bore complete all as specified and directed.

Taking up or down steel tubing and & connections including and making good the disturbed surfaces 20mm bore complete all as specified and directed.

S & F galvanised steel water tuning, medium grade, with all fittings and fixed complete to walls and ceiling or laid in floor 15 mm bore complete all as specified and directed.

S & F galvanised steel water tuning, medium grade, with all fittings and fixed complete to walls and ceiling or laid in floor 20mm bore complete all as specified and directed.

Refixing 15/20 mm bore old steel tubing with new connections in new or old position (walls, ceiling floors etc) complete all as specified and directed.

S & F in repair Chromoium plated bib taps, cast copper alloy with crutch or butterfly handle screwed down,fancy type screwed for iron pipe or brass ferrule, 15 mm bore complete all as specified and directed.

Taking down bib tap / wash basin tap/pillar tap/stop cock/mixture tape and refixing the same after reapir and replacement of washer 15 mm bore size complete all as specified and directed.Note: spindle where required will be measured and paid separately

Supply only brass spindle of 15 mm bore complete all as specified and directed.

S & F in repair Brass chromium plated wall mixer hot and cold arrangement long shank suitable for 15 mm bore of pipe of approved quality complete all as specified and directed.

S & F in repair Brass chromium plated Basin mixer hot and cold arrangement long shank suitable for 15 mm bore of pipe of approved quality completd all as specified and directed.

S & F in repair Chromoium plated angle cock, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule, 15 mm bore complete all as specified and directed.

S & F in repair, 15 mm bore stop cock, cast copper alloy with long shank and cup (concealed type) fancy type chromium platedscrewed down high pressure with crutch & butterfly handle screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F in repair 15 mm bore stop cock, cast copper alloy screwed down high pressure with crutch & butterfly handle fancy type chromium plated screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F in repair pillar tap cast copper alloy with capstan head chromium plated screwed down high pressure with or without lettered hot or cold with long screwed sharks and ply nuts 15 mm dia complete all as specified and directed.

S & F in repair bottle trap chromium plated for WHB as per approved quality complete all as per specified and directed.

S & F PVC Waste pipe size 32 mm flexible with coupling for WHB/Sink/Urinal etc complete all as specified and directed.

S & F in repairs 32 mm bore waste coupling of (min weight 32 mm-45 gm of PTMT) (half or full threaded) etc complete all as specified and directed.

S & F grating PVC 125 mm dia with waste hole of PTMT etc (minimum weight 40 gm) complete all as specified and directed.

S & F in repair CP Jet spray/Health faucet for 15 mm bore complete all as specified and directed.

S & F in repairs vitreous china wash basin white, flat back type of size 550 X 400 mm including cutting for and pinning in ends of brackets including 32 mm dia chromium plated waste coupling, PVC waste pipe, brackets complete all as specified and directed

S & F in repairs wash down water closet vitreous china white pedestal pattern with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding flushing cistern and flush pipe complete all as specified and directed.

S & F in repairs water closet vitreous china squatting pan, orissa pattern 580x440mm white with integral foot rests excluding flushing cistern and flush pipe including provision of concrete bedding complete all as specified and directed.

S & F in repair Kitchen sink made of stainless steel 1 mm thick with plug washer and waste pipe incl bedding fixing cantilever brackets and connetction union to pipe overall size 915 X 460mm bowl size 405X355mm complete all as specified and directed.

S & F in repair 1 mm thick stainless steel plate rack of size 900X600X200 incl fixing with rawal plug and screws complete all as specified and directed.

S & F in repair ball float valve high pressure of PTMT with epoxy coated aluminium rod & high density plastec ball screw for 20 mm bore iron pipe and fixed complete all as specified and directed.

S & F in repair 125 mm dia chromium plated shower rose of with or without swivel joint incl fixing to steel pipe complete all as specified and directed.

S & F in repair PVC connection 15 mm bore, 450 mm long complete with both ends unions complete all as specified and directed.

S & F in repairs, PVC valveless syphonic action type low level flushing cistern, 10 ltrs capacity with inlet, ball valve, float and handle including bracket complete all as specified and directed.

S & F in repair internal fitting for low level flushing cistern complete all as specified and directed.

S & F in repair PVC Tank cover for 500 Ltr capacity fixed in position with nuts and bolt complete all as specified and directed.

S & F in repair PVC Tank cover for 1000 Ltr capacity fixed in position with nuts and bolt complete all as specified and directed.

S & F in repair EWC sheet cover complete all as specified and directed.

S & F in repairs CP anodised tubular tower rail, 20 mm dia, D type, 60 cm long between flanges etc. complete all as specified and directed.

S & F in repair 75 mm PVC(SWR) floor trap with grating incl jointing with solvent cement complete all as specified and directed.

S & F in repair gun metal gate valve 20 mm dia with iron wheel head ,screwed both and for iron pipe complete all as specified and directed.

Demolition of existing sunken water proofing treatment/cement plaster/cement concrete any descripltion and removing the debris from site n exc 150 m from site complete all as specified and directed.

Supply only cement concrete type B1 1:2:4 (20 mm graded agg) as in padding concrete/coving for in Jn of sunken floor and vertical wall or to maintain proper slope on roof chamfored on edge complete all as specified and directed.

M & L for filling polymer modified non shrinking slurry for sunken floors for toilets by drilling holes 60mm by 20mm dia at 1 mtr interval and applying slurry all as per manufacturer's technical specification

M & L for epoxy treatment to sunken floors and testing the same after 48 hours with complete filling with in the sunken floor complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M & L 100 mm thick PCC 1:2:4 Type B2 using 40 mm graded aggregate as in wearing course of floor complete all as specified and directed.

M & L for 30mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate mixed with WPC at 3% by weight of cement complete all as specified and directed.

M & L for rendering 10 mm thick CM 1:3 surface as in roof with 3% integral water proofing compound by the weight of cement complete all as specified and directed.

M & L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S & F Powder coated three track Aluminium sliding window with frame not less than 1.8 mm thick incl aluminium grill and 4 mm thick tinted glass incl beading and necessary rubber packing ,locking arrangement opening arrangement in all fitting and fixture complete all as specified and directed.

S & F in repair cabinet mirror in bathroom complete all as specified and directed.

S & F in repair Soap dish any type fixed to plug with chromoium plated brass screw complete all as specified and directed.

S & F in repair mild steel Drawer handle projection drop 50 mm to 65 mm on screw plate complete all as specified and directed.

S & F Magic Eyes for doors complete all as specified and directed.

M & L preparation of old painted surfaces and applying one coat of white wash on walls complete all as specified and directed.

M & L preparation of old painted surfaces and applying one coat of white wash but on ceiling complete all as specified and directed.

M & L preparation of old painted surfaces and applying one coat of oil bound distemper on walls complete all as specified and directed.

M & L preparation of old painted surfaces and applying one coat of cement based on walls complete all as specified and directed.

M & L preparation of old decorated wooden painted surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L preparation of old decorated Steel painted surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for writing letters or figures (Block, Roman, Italic or Indian) n.exc 30 cm high etc complete all as specified and directed.

Taking down carefully aluminium point wiring with PVC conduit surface or wooden battens (light, fan, socket, bell or power) including sunken cast iron/pressed steel terminal boxes (except fitting such as switches, ceiling roses, lamp holders Sockets, regulators, call bell, light fittings any sketch etc) and making good disturbed surface of walls, floor etc complete all as specified and directed.

M & L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 volts grade drawn into and including cocealed rigid non metallic PVC conduit medium grade not less than 20 mm (ISI marked ) with all conduit fitting and fixing accessories including sunk in cast iron /pressed steel terminal boxes (duly painted with two coats of anti –corrosive paint outside and two coats of aluminium paint inside) with 2.8 mm thick hylam brand laminated white bakelite sheet cover for mounting switches, sockets, fan regulators etc and 1.5 sq mm multi strand copper conductor cable as continuous earth wire complete for the One light point controlled by one switch. (Make : Anchor/ Standard/ Finolex/Havells/HPL)

All as per item No. 119 above but for One fan point controlled by one, one way switch complete all as specified and directed.

All as per item No. 119 above but for One exhaust fan point controlled by one, one way switch complete all as specified and directed.

All as per item No. 119 above but for One 5 Amp socket point controlled by one switch on independent board complete all as specified and directed.

All as per item No. 119 above but for One 5 Amp socket point controlled by one switch on same board complete all as specified and directed.

All as per item No. 119 above but for One light point controlled by one, two way switch complete all as specified and directed.

All as per item No. 119 above but with cable PVC insulated 4.0 Sq mm (FR) in and including PVC Conduit incl continuous earthing with cable PVC insulated 2.5 Sq mm copper conductor for power socket 15Amps (Make : Anchor/ Standard/ Finolex/Havells/HPL)

S & F switch socket combination 2-in-1, 5 pin 5 Amp complete all as specified and directed. (Make : Anchor/ Standard/ C&S/Havells/HPL).

S & F switch socket outlet 5 pin 5 Amp complete all as specified and directed. (Make : Anchor/ Standard/ C&S/Havells/HPL).

S & F switch socket combination 2-in-1, 5 pin 5 and 15 Amp complete all as specified and directed. (Make : Anchor/ Standard/ C&S/Havells/HPL).

S & F switch piano (Flush type) 5 amps, 240 Volts, single pole one way complete all as specified and directed.

S & F switch piano (Flush type) 5 amps, 240 Volts, single pole two way complete all as specified and directed.

S&F ceiling rose, bakelite three terminal type complete all as specified and directed. (Make : Anchor / Standard/ Havells)

S & F bell ding dong electric single phase 240 Volt complete all as specified and directed. Make : .(Cable make Anchor/Havells / Finolex/RR Kabel)

S & F ceiling fan regulator electronic step type socket mounting type complete all as specified and directed. (Make : Anchor/ Standard/ C&S/Havells/HPL)

S & F LED light fitting 18/ 20 Watt T5 batten type,PVC extruded batten with decorative end caps complete with polycarbonate /glass tube 4Ft White , internally pre-wired and including connecting up with suitable twisted flexible copper conductor cable with suitable size complete all as specified and directed.

S & F of light fittings (2Ft) with wall mounted LED pattern with polycarbonate housing & integrated electronic driver of 9W cap T5(max lenght upto 600mm) complete all as specified and directed. Make :- (Make C&S /WIPRO/ CG / Phillips / Havells) (Note : Contractor shall submit warratny for 03 yrs)

S & F lamp holder PVC insulated body suitable for batten fitting straight/angle modular type with LED reterofit bulb 9 watts cap complete all as specified and as directed Make-Anchor/leader/SSK and bulbs C&S, Havells, Crompton

S & F in replacement of bldg security light fitting LED type of 20 watt New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 luminaire with high power LEDs as light source and electronic driver. mounting bracket suitable to house the light fittinhg , with its Galvanised Flat Iron clamps conntected nuts bolts etc complete all as specified & directed (Make C&S /WIPRO/ CG / Phillips / Havells) (Note : must for warrenty of 3 yrs to 5 yrs)

M & L for replacement of 2 Runs of cable PVC insulated but unsheathed 4.0 Sq mm, stranded copper conductor in and including PVC conduit with continuous earthing cable PVC insulated 2.5 Sq mm, stranded copper conductor all as specified and directed.(Cable make Anchor/ Havells /Finolex) Note :-2 runs of cable, one run of earth wire (copper cable) & one run of PVC conduit shall be measured as one running metre.

M & L of 2 Runs of cable PVC insulated but unsheathed 6.0 Sq mm, stranded copper conductor in and including PVC conduit with conceiled wiring continuous earthing cable PVC insulated 4.0 Sq mm, stranded copper conductor all as specified and directed.(Cable make Anchor/Havells/Finolex) Note :-2 runs of cable, one run of earth wire (copper cable) & one run of PVC conduit shall be measured as one running metre.

S & F in replacement sheet metal enclosure MCB, DB, SPN 8 way, (Make : Anchor/ Standard/ C&S/Havells/HPL)

S & F MCCB 100 Amps 4 Pole 25 KA 415Volts complete all as specified and directed. (Make : Anchor/ Standard/ C&S/Havells/HPL)

S & F MCCB 63 Amps 4 Pole 16 KA 415Volts complete all as specified and directed. (Make : Anchor/ Standard/ C&S/Havells/HPL)

S & F MCB TPN 40 Amps 16 KA 415Volts complete all as specified and directed. (Make : Anchor/ Standard/ C&S/Havells/HPL)

S & F MCB SPN 16 TO 32 Amp 10 KA 240 Volts complete all as specified and directed. (Make : Anchor/ Standard/ C&S/Havells/HPL)

S & F MCB, SP 6 to 30 Amp 10 KA 240 Volts complete all as specified and directed. (Make : Anchor/ Standard/ C&S/Havells/HPL)

S & F exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified and directed.

S & F in minor repairs to FTL fittings with tube rod by replacing bi-pin holders, connections , tube rods of any type and capacity etc. complete all as specified and directed.

S & F PVC conduit pipe 20mm dia complete alongwith necessary fixing arrangement complete all as specified and directed.

S & F PVC casing capping 25mm complete alongwith necessary fixing arrangement complete all as specified & directed

S & F in replacement of Electronic Ballast suitable for 36/40 watts FTL conventional light fittings complete all as specified and directed. (Make Anchor, havells, Bajaj, CG, C&S)

S & F in replacement of Electronic Ballast suitable for 28 watts FTL conventional light fittings complete all as specified and directed. (Make Anchor, havells, Bajaj, CG, C&S)

M & L for earthing with galvanized steel earth plate electrode 600 x 600 x 6mm thick, buried directly in ground(earth pit not less than 2.25 mtrs deep below ground level)with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers protected with & including 15 mm dia light grade GI pipe necessary excavation and earth works, charcoal and common salt filling, watering arrangement with 20 mm GI pipe light grade including PCC pit with Pre cast RCC (1:2:4) cover, GI funnel with mesh test point, testing & commissioning all as specified and directed.

M/S. KISHAN ENGINEERING

M/S JAGANNATH SASMAL

M/s MAA BHAIRABI ENTERPRISES

M/S SIWALIK AND CO

DHABALESWAR ENGINEERING WORKS

DEBASHIS AGENCY

M/s Ats Electricals