REPAIR MAINT OF PLASTER CHAJJA FLOORING TANKS ROOF SUNKEN TREATMENT LEAKAGE SEEPAGE AND CONNECTED ITEMS IN THE AREA OF AGE BR II UNDER GE EAST LUCKNOW

Dismantling of existing roof treatment of any description and any thickness including Mud phuska/brick tiles or other treatment etc upto PCC padding complete including removal of debris away from the site complete all as directed Note:-(i)Contracter shall provide in own arrengement for removal of rubbish ,outside mud land ,quoted rate shall be deemed included in this aspect. (ii) Old serviceable brick tiles shall be reused at site as per direction of Eng-in- Chrage.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L for PCC 1:3:6 type B-1 using 20mm graded crushed stone aggregate as in roof padding, bed plates or mass concrete complete all as specified and directed

M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in roof kebs or mud stops, rounded or chamfered on edges for exposed to weather and cleaning by wire brushes etc complete all as specified and directed

M&L for roof/sunken treatment with polymeric water proofing membrane with specification as under:- (a) M&L for plastering 10mm in CM 1:4 using 100% course sand on roof including WPC @ 3% by weight of cement. (b) Applying 3mm hauck walt seal or fixed 302 super latex as per company enstruction or equivalent in fosrock/sika on plastered surface/sunken floor. (c) Applying a coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm. (d) Supply and laying APP based polymeric water proofing membrane, weight not less than 3.00 kg/sqm and and minimum 3 mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) sealed the side laps with spread temper (e) Applying a coat of hot blown bitumen grade 85/25 @ 1.20Kg/Sqm (f) Sunken floor tratment shall be provided allround sunken wall and hoor after removing of GI pipe connections and sanitary fittings safely and after treatment the same will be refixed at site

M & L for applying Two coats of aluminium painting on water proofing treatment, complete all as specified and as directed.

M&L for 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

S&F 40 mm thick brick tiles laid on 15mm thick screed bed in CM (1:6) & joint grouted flush in cement mortar (1:3).with WPC as per manufacture's instruction complete all as specified and directed .

All as per item No 08 but except brick tiles all as per specified and directed.

Supplying and applying 2 Coats of Smartcare Dampblock 2K Suprema of two components elastomeric acrylic polymer modified cementitious waterproofing coating on Walls before Plaster, SmartCare Damp Block 2K Suprema or approved equivalent, having 80 % elongation as per ASTM D412, resisting 5 bars hydrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging up to 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications.Minimum material consumption@ 1.45 /Sqm for two Coats complete all as specified and directed by Eng-in -charge

Supplying and applying 2 coats of Smartcare Hydroloc - one component, ready-to-use, penetrative-cum-film forming interior waterproofing coating on Plaster Surface, SmartCare Hydroloc or approved equivalent, The product coating should form a breathable , but water-tight film which doesn’t allow transport of water and salts to the surface, Resisting up to 4 bars of negative hydrostatic pressure (ASTM D7088), Applicable up to 70% substrate moisture, having Pore blocking additive, complete as per manufacturers specifications. Minimum material Consumption 0.350 kg/Sqmtr in two coats complete all as specified.

Supplying and applying High performance elastomeric waterproofing coating cold applied spray / brush applied, SmartCare Damp Proof Ultra liquid membrane (Polyurethane in Acrylic Medium) with an elongation of min. 250%, solid content of min. 50%. The system includes application of SmartCare Damp Proof Ultra in three coats at 1.25 litre per Sq.M. with Fibre mesh sandwiched between the second and the third coat complete as per manufacturer specifications. (The product should have 10 years waterproofing warranty subject to discussion after examining surface conditions), 1st coat should be done @ 250 ml with 30% dilution per Sq.M and left to be dried for 4-6 hours at ambient temperature, 2nd coat should be done @500ml with 0% dilution per Sq.M and Fibre mesh of 60 GSM should be immediately pressed on to the coating while still wet. It should be left to be dry for 4-6 hours. 3rd coat should be done @500ml with 0% dilution per Sq.M. Should be left to be dry for 48 hours with no traffic. Coating should be terminated on the outer side of the parapet walls or if not possible, should be terminated into a 1.5 inch groove cut into the walls. The WP system should be ponded and tested after 48 hours for 24 hours and any visible dampness should be immediately investigated and treated for. “NOTE for ITEM No. 10 to 14 – (a) Authorised applicator as approved by GE shall be executed the treatment. Painting and satisfactory test certificates shall be provided for each centre. The warranty guarantee of 8 years shall be provided to Eng-in-charge alongwith gurantee of 8 Years. (b) Mou in between applicator and contracter shall be provided to Eng-in -charge for approval site

M&L Providing and applying single component SmartCare PU Magnum solvent base Pure polyurethane liquid membrane for the concrete roof surfaces in two coats @1.85kg/ sqm and mixing ratio of hardener and base is 95:05 and consisting of a coat of two component epoxy primer in ratio of 1:1(one part of resin and one parts of hardner) at a consumption of 0.200kg/sqm . the vital physical and chemical parameters shall be as under : Min Elongation at break of 500% as per ASTM D2370 and tensile strength of 3.0 N/mm2 as per ASTM D2370, Crack Bridging ability greater than 3mm as per C1305 ,Water Impermeability on coated concrete @7 bar as per DIN1048,Water vapor permeability 0.72 perms as EN ISO 7783-2 . The material shall be applied with brush and it should be tested according to EN 1504-2 as a coating for surface protection for concrete,complete in all respect as per the direction of Engineer-in-charge

M&L for sealing of pipe penetration of toilets core cutting in the stages as-Supply and apply solvent Sikaguard -694 F(I) free ,moisture insensitive epoxy resin based patch repair putty on pipe penetration surfaces.The moisture insensitive putty with yield 0.6 ltr/kg suitable for submerged condition;compressive strength of 40N/Sqmm(1 day) according to IS 9162-1979.The putty shall be applied to groove thickness of minimum 20 mm on pipe ,penetration joint to concrete as per direction of the Engr-in Charge.

S&F 32mm dia GI tubes light grade galvanised with all fiting and fixed complete to wall inside of sunken floor.complete all as specified and directed .

Supply only liquid water proofing compound complete all as specified and directed .

M&L for PCC 1:5:10 type E-2 (using 40 mm graded crushed stone aggregate) as in mass concrete of floor etc complete all as specified and directed.

M&L for 20 mm thick cement plaster (on roof projection, chajja's, ceiling etc.) in CM(1:3) mixing an integral waterproofing compound, Sika Cim @ 100 gms per bag of cement over 1st coat of Sika® Topseal 107, aacrylic polymer modified cementations waterproofing coating, incl 2nd coat of Sika®Topseal 107, acrylic polymer modified cementations waterproofing coating, finished the surface even and smooth without using extra cement including necessary scaffoldings complete upto G+2 Floor Buildings all as specified and directed by Engineer - in - Charge.

Demolition of reinforcement cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

M & L for RCC 1:1.5 :3 type A1 (using 20 mm graded crushed stone aggregate) as in Chajjas/Shelves etc all as specified and directed.

M&L for TMT bars 6 to 8 mm dia and over for reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, and binding with and incl MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-415 or Fe-500 complete all as specified and directed.

M&L for formwork to sides and soffits of concrete of roof beams, lintel beams, cantilevers, shelves, Chajjas etc complete all as specified and directed

Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:6 and to be finished even and smooth with out using extra cement complete all as specified and directed

M&L 15 mm thick rendering in CM 1:4 on external surfaces of brick walls at any height with liquid water proofing compound as per manufacturer's instn surface finished even and smooth without using extra cement.(WPC shall be measured and paid seperat)complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on RCC ceiling surface complete all as specified and directed .

M & L for Preparing and applying two coats of cement base paint on new Plasterd surface of wall complete all as specified and directed .

M & L preparation and applying three coats of white wash on new plastered surface of wall.complete all as specified and directed .

M&L for applying two coats of oil bound distemper over a coat of primer on walls including preparation of new plastered surface complete all as specified and directed.

M & L preparation and applying three coats of white wash on new plastered surface of ceiling.complete all as specified and directed .

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

M & L glazed ceramic joint free coloured tiles in vertical surfaces 450x300x7-8mm/600x300x7-8mm thick, set and joiunted in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M & L coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) are of each tile exc 0.09 Sqm but n. Exc. 0.18 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer with CM 1:6 complete all as specified.

M&L for digital vitrified ceramic tiles 9-10mm thick (square/rectangular), joint free, polished, coloured (dark shade as approved), area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:4 complete all as specified and directed.

Demolition of reinforcement cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L for TMT bars 8 mm dia and over for reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, and binding with and incl MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-415 or Fe-500 complete all as specified and directed.

M&L for RCC 1:2:4 using 20 mm graded crushed stone aggregate in slabs supported on walls, beams and columns in floors roofs, landing, balconies canopies, deck slabs and in shelves and the like complete.

M&L for form work to soffits of suspended slabs, such as shelves and similar work; not exc. 200 mm thick for flat rough finish surfaces.

M&L for Black Granite for WHB plateform (of any type) 20mm thick machine cut laid over 20 mm thick screed bed in CM 1:6 , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L fly ash Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Ditto all as per item No 41 above but except bricks

M&L fly ash Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 in half brick thick wall complete all as specified and directed.

S&F 15mm dia tubes (medium grade) galvanised, with all fitting and fixed complete to walls/ ceilings/ concealed or laid in floors including taking up or down existing steel tubing and connections all as specified and directed

S&F 20 mm Tubes (medium grade) galvanised with all fitting and fixed complete to walls/ ceiling / concealed or laid in floors including taking up or down existing steel tubing and connections complete all as specified and directed

S&F, 500 Ltr capacity Rotational moulded polyethylene water storage tanks double layered ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing one all as specified and directed

S&F 1000 Ltr capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing one complete all as specified and directed

Disconnecting existing tanks, setting aside (or lowering if required) and hoisting if required, reconnecting and re-fixing in position after Cleaning and removing all scale and dirt, etc from water tanks and from mouths of circulating pipes , etc. using bleaching powder or ant other suitable cleaning agent, capacity of water tank exc. 250 ltrs but n exc 500 ltrs complete all as specified and as directed.

Disconnecting existing tanks, setting aside (or lowering if required) and hoisting if required, reconnecting and re-fixing in position after Cleaning and removing all scale and dirt, etc from water tanks and from mouths of circulating pipes , etc. using bleaching powder or ant other suitable cleaning agent, capacity of water tank exc. 500 ltrs but n exc 1000 ltrs complete all as specified and as directed.

S & F in repair 20 mm PTMT float valve, high pressure with Polythene floot and flynut complete, screwed for Iron pipe etc all as specified.

S & F, in repair 25 mm dia float valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe with fly nuts complete all as specified and directed.

S & F in repair gun metal gate valves, 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S & F in repair Bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle sc-rewed down screwed for iron pipe or for brass ferrule and fixed (15mm bore dia of pipe ) weight not less than 75 gram each complete all as specified and directed .

S&F in repair 15mm dia concealed stop valves concealed type CP with fancy type,chromium plated with long shank and cup, fixed in repair complete.

S&F in repair 15mm dia C P stop valve/angle cock chromium plated with curtch or butterfly handle screwed down, screwed for iron pipe of brass ferrule and fixed in repair (cp stop cock/valve shall be ISI marked of top complete.

S&F in repair brass chromium plated shower rose with swivel joints 125mm dia incl fixing to steel pipe or union.

S & F in repair chromium plated brass single hole basin mixer with hot and cold arrangement with long shank and cup suitable for 15mm bore pipe complete, all as specified and directed.

S&F in repair 15 mm bore chromium plated brass wall mixer with hot and cold arrangement with long shank, cup and 'L' bend complete, all as specified and directed.

S&F in repair 15 mm bore chromium plated brass sink mixer with hot and cold arrangement with long shank, cup and movable spout complete, all as specified and directed.

S&F in repair CP brass health faucet(hand shower) 15 mm dia, min 1.00 m long flexible metal tube and wall hook/holder in polished crome complete all as specified and directed by engineer in charge.

S & F in repair 15 mm bore dia of pipe pillar taps fancy type cast copper alloy with chromium plated screwed down hidh pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed

S & F in repair snow white vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) fixed in repair complete.

S&F vitreous snow white china wash down water closet pan pedestal pattern, including P/S trap and connection to drain (or outgoing pipe) excluding soft/pvc seat cover, flushing cistern and flush pipe complete all as specified and directed

S &F in repair snow white plastic water closet seat cover soft, closed pattern with flat bottom and cover and mild steel C.P. or Aluminum hinging device complete all as specified and directed

S&F in snow white repair 10 ltrs capacity symphonic action type low level flushing cistern including flush pipe, PVC connection, cantilever brackets incluiding taking down existing cistern etc complete fixed in repairs complete .

S&F in repair vitreous China wash hand basinsnow white size 550 x 400mm including GI brackets fixed to wall with pcc & white cement putty complete all as specified and directed.

S&F in repair Vitreous China wash hand basin snow white under counter type oval shape of size 550x400mm including brackets, waste coupling,pipe fittings complete all as specified and directed.

S&F, in repair Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed 32mm bore, all as specified and directed.

S&F, in repair 32 mm bore Low density PVC flexible pipe for Wash hand basin/sink etc complete all as specified and directed.

S & F, in repair PVC connections 15 mm size with PTMT nuts of length 450 mm all as specified and directed.

S & F in repair cp grating with or witout waste hole size 100 mm fixed with white cement in tiles flooring.

M&L in repair soap dish with glass tray fixed to wall with plug and chromonium plated brass screw embedded in the wall complete all as specified and directed

S&F in repair PVC bath cabinet with 4mm thick looking mirror of overall size 560x410mm of approved make: parryware or Hindware or L&R or Jaquar complete, all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory ISI marks with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete, all as specified and directed. Note:- Height of SS stainless steel sink with drainge board shall be got tested and conform to IS.

S&F in repair stainless steel kitchen plate rack made of 0.80mm thick sheet of size 750x600x250mm and fixed to wall, complete, all as specified and directed. Note:- (Weight of plate rack shall be less than 8 kg each)

S&F in repairs PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls (110 mm Bore) complete all as specified and as directed.

S&F in repairs PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls (75mm Bore) complete all as specified and as directed.

PVC (SWR) bends, 110 mm bore, any radius fixed to walls including distance pieces and stack clamps complete all as specified.

All as per above no 78 item but 75 mm bore, etc.

S&F in repair PVC (SWR) floor trap, plain with grating including joint-ing with solvent cement ( Diameter of outlet 75mm)

S&F, in repair sheet glass shelf assemble consisting of 5.5 thick toughened glass shelf 12cm wide with CP bracket guard & railing 60cm long all as specified and directed.

S&F, glass corner self assembly, fancy type, made of 6 to 7mm thick toughened glass of size 250x250mm, fixed with CP brackets, all as specified and directed.

S&F in repairs false ceiling with 4 mm thick E-board "Make-Everest" white prelaminated set embossed reinforced designer ceiling board of approved texure fixed with GI imposed grid frame work of size not more than 600 x 600 mm having 24 mm wide T- section, runner made of 0.33 mm GI sheet and angle made of 0.45 mm GI sheet, suspended with 2 mm dia GI wire complete all as specified and directed

Taking down chowkat or frame with shutter (without taking of shutters from the frames including iron mongrie) area not exceeding 1.5 Sq mtr each including iron mongrie complete all as specified.

Taking down chowkats or frames exc. 1.5 sqm but n.exc 4.0 sqm each with shutters (W/o taking off shutters from the frame) and removal to store complete all as specified and directed

Taking down shutters of any description exc. 1 Sqm and nexc. 2 Sqm each upto taking of iron mongrie and removal to store yard

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges,lock strike plate, etc Including cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as for filling in door frames etc complete as specified and as directed.

S&F pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges,lock strike plate, etc Including cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as for filling in door frames etc complete, all as specified and as directed.

S&F hold fasts; supports or stays for rainwater, knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed

S&F 30mm thick flush shutters solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed

S&F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixing with stainless steel wire staples including taking down mild steel frame and refixing mild steel frame with new wire mesh with tinned tack/by welding in steel window and ventilators and making good the disturbed portion during execution of work, complete all as specified and directed.

S&F 250 mm long Aluminum alloy, anodised sliding door bolts, plate type, ,and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminum alloy complete all as specified and directed.

S&F in repair including taking down by welding or unscrewing of 300mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate complete all as specified & directed (Fixed with screw or welding as required)

S&F including taking down by welding or unscrewing of 300mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate complete all as specified & directed (Fixed with screw or welding as required)

S & F factory made PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube suitable for opening as per site condition complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M. S. tubes for top & bottom rails. M. S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S & F, 100 mm size butt hinges, stainless steel, and fixed all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section 200mm long complete.

S&F Aluminium handles cast type anodised of 150mm complete.

M&L for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete, all as specified & directed.

S&F aluminum ventilator (louvers) with 3.8 mm thick plain / tinted glass consisting of frame of size 63.5 x 44 and sections weighing not less than 0.55 kg/m with locking arrangement as approved fixed including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings including 3.8mm thick glass and stainless steel wiremesh of 0.36mm including necessary fixing arrangement complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating 50 micron) aluminum Window sliding type three track with glazed and gauzed shutter (including stainless steel wire cloth 0.36 mm nominal dia and 1.40 mm apreture and 3.8 mm thick plain glass) on wheel consisting frame of size 100mm x 44mm (1.5mm thick) (sliding shutter consist of suitable size of section as specified and directed) with locking arrangement as approved fixed with rubber gasket and aluminum beading etc including necessary cutting hole in wall, including powder coated aluminum grills of aperture 75 mm and fixed in frame of window, complete all as specified and directed. (Note-glazed shutters glass thickness not less than 3.8 mm and wiremess shutter with SS wiremesh as approved by GE is also included. No payment will be made separately)

Hacking out old broken glass(any thickness, size, quality or description) from wooden/steel /aluminium frames, glazed with putty or fixed with beads.

S&F 3mm thick frosted/pin headed glass, ordinary quality and glazing with oil putty in a square n exc 0.5 Sq m in each pane complete all as specified.

S&F 3mm thick plain sheet glass, ordinary quality and glazing with oil putty in a square n exc 0.5 Sq m in each pane complete all as specified.

S&F 3mm thick plain sheet glass in repair ordinary quality and glazing with oil putty in a square exc 0.5 Sqm in each pane complete all as specified.

S&F 5mm thick plain sheet glass, ordinary quality and glazing with oil putty/rubber beading in wooden/steel/aluminium windows in a square n.exc 0.5 Sqm in each pane complete all as specified.

Taking down shutters of any description exc 2 Sqm each and refixing in the same opening after repair and replacement of iron mongrie complete all as specified and directed. Note:- (Iron mongries will be measured and paid separtely respective items)