Tender for Balance Electrical works of Proposed Integrated Infrastructure Complex at CDA Sector - 10, Cuttack, Odisha (2nd Call).

Tender for Balance Electrical works of Proposed Integrated Infrastructure Complex at CDA Sector - 10, Cuttack, Odisha (2nd Call)

Tender for Balance Electrical works of Proposed Integrated Infrastructure Complex at CDA Sector - 10, Cuttack, Odisha (2nd Call)

NIT No: PCO/BBSR/909/232 Date-02.01.2026

TOTAL

One Crore Fifty Five Lakh Twenty Six Thousand Six Hundred & Sixty Eight Only

Junior Engineer Assistant Executive Engineer

Jajpur (R&B) Section-II (R&B) Sub-Division,

Jajpur

Chief Construction Engineer

Cuttack (R&B) Circle

Tender for Balance Electrical works of Proposed Integrated Infrastructure Complex at CDA Sector - 10, Cuttack, Odisha (2nd Call)

NIT No: PCO/BBSR/909/232 Date-02.01.2026

Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door horizontal type powder coated wall mounted 1.6mm 7 segment TPN Distribution Boards suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom detachable plate for interconnections etc as below

Supply, fixing, erecting, connecting and commissioning of indoor type dust and vermin proof, sheet steel clad ready made, double door Vertical type powder coated wall mounted 1.6mm VTPN Distribution Boards (SMDB) complied to IEC 61439 suitable for 440 V, three phase, 4 wire 50 Hz AC Supply complete with bottom/side detachable plate for interconnections etc as below.

In commer- 500A 4P Change over Switch ,500A 4P MCCB 50KA -1 No as incomer

Busbar- 04 numbers of 630Amps Electrolytic copper busbar duly sleeved by color coded PVC sleeve & supported by suitable size DMC insulator.

Out going- (i) 250A 4P MCCB 36KA- 6Nos

(ii) 63A TPN MCB- 4Nos

(iv) 32 A 4P MCB 10KA - 2Nos

Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.

NB- This panel should have proper earth by suitable rated copper flat.

In commer- 630A 4P MCCB 50KA - 2 Nos. (1 spare & 1 as incomer)

Busbar- 04 numbers of 800Amps Electrolytic copper busbar duly sleeved by color coded PVC sleeve & supported by suitable size DMC insulator.

Out going- (i) 500A 50kA 4P MCCB - 2 nos. (1 spare & 1 outgoing)

(ii) 63A TPN MCB-2Nos as outgoing for area illumination

Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse.

NB- This panel should have proper earth by suitable rated copper flat.

Supply, installation, testing and commissioning of Recess mounted LED 2'x2' , luminaire having Lumen Output not less than 3300 Lumen and system efficacy not less than 110 lm /W, Housing made up of CRCA with IP20 Protection. The operating CCT shall be ≥5700K with CRI of ≥80 with input voltage range of 150 to 270V THD <10% & PF not less than 0.9, Having not less than 40,000 Hrs LED Life as per L70 Standard. Luminaire shall have minimum surge protection upto 4 KV.

Supply, installation, testing and commissioning of Surface mounted LED 2'x2' , luminaire having Lumen Output not less tha 3300 Lumes and system efficacy not less than 110 lm /W, Housing made up of CRCA with IP20 Protection. The operating CCT shall be ≥5700K with CRI ≥80 with input voltage range of 150 to 270V THD <10% & PF not less than 0.9, having not less than 40,000 Hrs LED Life as per L70 Standard. Luminaire shall have minimum surge protection upto 4 KV.

Supply, installation, testing and commissioning of LED indoor 12/11W recessed downlighter having efficacy not less than 100 Lm/W suitable for general lighting. Luminaire should have pressure die-cast Al housing suitable to operate at single phase 240Vac supply i/c all accessories as required.

Supply, installation, testing and commissioning of LED indoor 12/11W Surface downlighter having efficacy not less than 100 Lm/W suitable for general lighting. Luminaire should have pressure die-cast Al housing suitable to operate at single phase 240Vac supply i/c all accessories as required.

Supply, installation, testing and commissioning of 4 ft 20WLED tubelight (housing made of CRCA sheet steel) complete with all accessories, system lumens output not less than 2000 Lumens for LED Tubelight, having efficacy not less than 100Lm/W working on 230V 50Hz A.C Supply, suitable for installed directly on ceiling/wall, with all accessories complete as required.

Supply, installation, testing and commissioning of 5W (1ft) LED batten (for mirror light) suitable to operate on single phase 230V ac supply having housing made of polycarbonate i/c all accessories as required.

Supply, installation, testing and commissioning of 9 W LED bulb with angle holder suitable for 240V , 50 HZ single phase supply.

Supply, installation, testing and commissioning 10 W LED Bulk Head fitting with Die cast aluminium housing having efficcacy not less than 100 Lumen/ Watt , IP 65, Operating Voltage 140-270V, ac 50 Hz i/c all accessories as required.

Supply installation testing and commissioning of 1200mm sweep (100% Copper Winding with Alluminium Blades, 28W & 4 years Warranty), BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6, Air delivery minimum 210 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10% and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Supply, installation, testing and commissioning of 300 mm sweep 1400/1350 rpm exhaust fan (100% Copper Winding & 4 years Warranty) with louvers/ shutters complete with frame , metalic body including all accessories , etc. complete as required.

Supply, installation, testing and commissioning of 250 mm sweep exhaust fan (100% Copper Winding & 4 years Warranty) with louvers/ shutters complete with frame , PVC body including all accessories , etc. complete as required.

Total - {Sum of A to G}

Please Enable Macros to View BoQ information