Construction of Single Court Complex and Residential Building for High Court of Telangana at Boath, Adilabad District, Telangana.

SL No. DSR-2023 DESCRIPTION DSR AMOUNT NON DSR AMOUNT TOTAL

A CIVIL, INTERIOR AND EXTERNAL DEVELOPMENT

1 EARTH WORKS 1343473.42 0.00

2 CONCRETE WORKS 2702053.23 0.00

3 REINFORCED CEMENT CONCRETE WORK 4,20,99,105.31 0.00

5 CLADDING, MARBLE & GRANITE WORK 6,57,477.94 0.00

11 STRUCTURAL GLAZING 3,72,870.00 5,75,205.75

12 WATER PROOFING 11,86,190.00 0.00

13 COURT ROOM FURNITURE 0.00 10,38,800.00

14 EXTERNAL DEVELOPMENT 6603771.34 6,64,534.00

15 INTERNAL ELECTRICAL WORK 31,61,535.41 35,22,355.13

16 EXTERNAL ELECTRICAL WORK 629171.62 79,54,364.82

18 PLUMBING, SANTARY & EXTERNAL SERVICES 4139377.0 2022396.4

19 FIRE FIGHTING 7,00,965 1,95,188

20 ELEVATOR 2768648

GRAND TOTAL OF DSR AND NDSR 11,04,78,234.00

GRAND TOTAL OF DSR AND NDSR 11,04,78,234.00

Digitally signed by DEEPAK

PROJECT :- PROPOSED High Court & Residential Building at Adilabad

BOQ - CIVIL WORKS Quantity Amount

Sl. No. (DSR- DESCRIPTION UNIT Rate Residential Total Qty DSR Amount NDSR Amount

A 2 EARTH WORK

Earth work in Excavation by mechanical means (Hydraulic excavator) /manualmeans over

areas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting

1 2.6 out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by

Engineer-in-charge.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations

2 2.25 etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming Cum 196.00 699.40 153.28 852.68 167125.18

and watering, lead up to 50 m and lift upto 1.5 m.

Excavating, supplying and filling of local earth (including royalty) by mechanical transport

3 2.25(a) upto a lead of 5km also including ramming and watering of the earth in layers not Cum 700.50 328.95 69.67 398.62 279233.28

exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or

stacked materials.

Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of

the area cleared.

6 2.34 Supplying chemical emulsion in sealed containers including delivery as specified.

6.1 2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% Ltr 234.75 266.49 30.97 297.46 69828.40

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment

(excluding the cost of chemical emulsion) :

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300

7.1 2.35.3 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1

cement : 2 Coarse sand) to match the existing floor:

7.1.1 2.35.3.1 With Chlorpyriphos E.C. 20% with 1% concentration Sqm 310.05 1719.50 278.69 1998.19 619538.47

TOTAL EARTH WORK 1343473.42 0.00

B 4 CONCRETE WORKS

Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone

aggregate 40 mm nominal size derived from natural sources)

Providing and fixing up to floor five level precast cement concrete string or lacing courses,

copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases,

9 4.5 etc., including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse

sand), cost of required Centering complete.

1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone

aggregate 20mm nominal size derived from natural sources)

Digitally signed by DEEPAK

BOQ - CIVIL WORKS Quantity Amount

Sl. No. (DSR- DESCRIPTION UNIT Rate Residential Total Qty DSR Amount NDSR Amount

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement :

10 4.10 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm Sqm 410.85 205.04 84.24 289.28 118849.42

nominal size derived from natural sources)

Extra for providing and mixing water proofing material in cement concrete work in doses by Per 50

weight of cement as per manufacturer's specification. kg

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved

12 4.13 quality using 1.7kg per square metre on damp proof course after cleaning the surface with Sqm 1138.25 205.04 84.24 289.28 329269.45

brushes and finally with apiece of cloth lightly soaked in kerosene oil.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand

(zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size

13 4.17 derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, Sqm 749.30 193.68 56.16 249.84 187204.84

well rammed and consolidated and grouted with fine sand, including necessary excavation,

levelling & dressing & finishing the top smooth.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness)

including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses,

string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills,

14 4.2.2 fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering Cum 10357.55 20.09 17.24 37.33 386664.27

and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3

graded stone aggregate 20 mm nominal size derived from natural sources).

TOTAL (Carried Over to Summary of Civil Works) 2702053.23 0.00

C 5 REINFORCED CEMENT CONCRETE WORK

15 5.9 Centering and shuttering including strutting, propping etc. and removal of form for :

15.1 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. Sqm 392.15 400.118 34.992 435.110 170628.54

Walls (any thickness) including attached pilasters, butteresses,plinth and string courses etc.

15.3 5.9.20 Suspended floors, roofs, landings, balconies and access platform. Sqm 1028.4 3467.47 278.687 3746.16 3852545.88

15.4 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers Sqm 736.4 1633.03 360.528 1993.56 1468058.27

15.5 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. Sqm 961.3 1079.54 86.44 1165.98 1120855.42

15.6 5.9.7 Stairs, (excluding landings) except spiral-staircases. Sqm 764.95 120.22 19.1703 139.39 106626.67

Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded

stone aggregate 6mm nominal size ), reinforced with 1.6 mm dia mild steel wire, including

16 5.18 centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1

cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits.

Digitally signed by DEEPAK

BOQ - CIVIL WORKS Quantity Amount

Sl. No. (DSR- DESCRIPTION UNIT Rate Residential Total Qty DSR Amount NDSR Amount

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position

and binding all complete upto plinth & above plinth level.

Providing and laying in position machine batched and machine mixed design mix M-25

grade cement concrete for reinforced cement concrete work, using cement content as per

18 5.33 approved design mix, including pumping of concrete to site of laying but excluding the cost

of centering, shuttering, finishing and reinforcement, including admixtures in

(Note :- Cementproportions as per IS:in9103

content considered thisto accelerate,

item is @ 330retard setting

kg/Cum. of concrete,

Excess/less cementimprove

as per design mix is payable/recoverable separately).

All works upto plinth level. Concrete of M25 grade with minimum cement content of 330 kg

All works above plinth level upto floor V level. Concrete of M25 grade with minimum

cement content of 330 kg /cum

TOTAL (Carried Over to Summary of Civil Works) 42099105.31 0

D 6 BRICK WORK

Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level up

to floor V level in all shapes and sizes in :

19.1 6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 9105.95 78.20 78.20 712057.15

Half brick masonry with common burnt clay F.P.S. (non modular) bricksof class designation

7.5 in superstructure above plinth level up to floorV level.

20.1 6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 1123.80 49.19 49.19 55282.53

Brick work with non modular fly ash bricks conforming to IS:12894, class designation

21 6.34 10 average compressive strength in super structure above plinth level up to floor V

21.1 6.34.2 Cement mortar 1:6 (1 cement : 6 Coarse sand) Cum 8752.55 415.05 415.05 3632707.44

Half brick masonry with non modular fly ash bricks of class designation 10, conforming to IS

:12894, in super structure above plinth and upto floor V level.

22.1 6.45.2 Cement mortar 1 : 4 (1 cement : 4 coarse sand) Cum 1105.80 389.54 389.54 430750.46

TOTAL (Carried Over to Summary of Civil Works) 4830797.58 0.00

E 7 MARBLE & GRANITE WORK

Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed

23 7.38 of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with

an admixture of pigment to matchthe stone shade.

23.1 7.38.1.1 Granite stone of any colour and shade sqm 3094.55 111.825 111.83 346048.05

Digitally signed by DEEPAK

BOQ - CIVIL WORKS Quantity Amount

Sl. No. (DSR- DESCRIPTION UNIT Rate Residential Total Qty DSR Amount NDSR Amount

Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and

prepolished, machine cut for kitchen platforms, vanitycounters, window sills, facias and

similar locations of required size,approved shade, colour and texture laid over 20 mm thick

24 8.2 base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed

with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing

to edges to give high gloss finish etc. completeat all levels.

24.1 8.2.2 Granite stone slab colour black, Cherry/Ruby red

Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1

25 8.9 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white

cement complete.

25.1 8.9.1.2 Granite of any colour and shade Sqm 3617.55 59.29 59.29 214480.92

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including

26 8.3 machine polishing to edge to give high gloss finish etc.complete as per design approved by

Engineer-in-Charge.

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia

27 8.4 and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. RM 568.55 12.524 7.900 20.424 11611.78

Extra for providing opening of required size & shape for wash basins / kitchens sink in

kitchen platform, vanity counters and similar location in marble / Granite /stone work

28 8.5 including necessary holes for pillar taps etc. including moulding, rubbing and polishing of Nos 978.7 10.000 6.000 16.000 15659.20

cut edges etc. complete.

F 9 WOOD AND P.V.C. WORK

Providing wood work in frames of doors, windows, clerestory windows and other frames,

29 9.1 wrought framed and fixed in position with hold fast lugs or with dash fasteners of required

dia & length ( hold fast lugs or dash fastener shall be paid for separately).

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I)

decorative type, core of block board construction with frame of 1st class hard wood and

30 9.2 well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on

both faces of shutters.

30.1 9.20.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Sqm 3473.85 80.057 29.700 109.757 381280.22

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all

edges of flush door shutters (over all area of door shutter to be measured).

Digitally signed by DEEPAK

BOQ - CIVIL WORKS Quantity Amount

Sl. No. (DSR- DESCRIPTION UNIT Rate Residential Total Qty DSR Amount NDSR Amount

Providing and fixing wooden moulded beading to door and window frames with iron

screws, plugs and priming coat on unexposed surface etc. complete.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm

diameter bolts, nuts and wooden plugs and embedding in cement concrete block

33 9.53 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal Each 228.85 262.2 84.000 346.200 79227.87

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not

34 9.96 less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade,

with nuts and screws etc. complete :

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less

35 9.97 than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with

necessary screws etc. complete :

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than

36 9.1 grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with

necessary screws etc. complete :

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic

37 9.101 coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour

and shade, with necessary screws etc. complete.

Providing and Fixing M.S Shaft Door Including Frame 50x50x5 mm thick angle Frame and

38 M.R shutter fabricated from 16 gauge GI Sheet final finish with powder coating. Also fixing Sqm 9970.95 3 3 29912.85

Floated Glass size 250x450x6mm thick with all accessories like Hinges/Lock/Rubber Beading

Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating

conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-

in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top

rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I.sheet (zinc coating

39 9.137 not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary Sqm 7533.2 12.600 12.600 94918.32

stainless steel ball bearing hinges of approved make, including applying a coat of approved

fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to

be paid for separately).

Digitally signed by DEEPAK

BOQ - CIVIL WORKS Quantity Amount

Sl. No. (DSR- DESCRIPTION UNIT Rate Residential Total Qty DSR Amount NDSR Amount

Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc.,

with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120

gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the

edges and 150 mm c/c , including applying a coat of approved fire resistant primer/ powder

coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size

etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of

Engineer-in-charge with glass of required thickness having 60 minutes of fire resistance

both integrity & radiation control (EW60) and minimum 20 minutes of insulation (EI20).

The manufacturer have to give test report/certification of fire glass and the glass should

have the stamp showing the value of E, EW & EI. The glass shall be tested in approved

NABL accredited lab

or by any other accreditation body which operates in accordance with

ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and

calibration scopes shall be eligible. The maximum glazing size shall

not be more than 1100x2200 mm (w x h) or 2.42 sqm.

Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch &

41 9.139 Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by Sqm 8366.15 8.000 8.000 66929.20

the Engineer- in- charge, all complete

42 12MM THICK COMPACT LAMINATE WC CUBICLE

Providing and fixing Toilet cubical(of following standard dimension which includes 600mm

door size width) made up of thermosetting resign treated high pressure ,self supporting

decorative compact laminates with permanently incorporate anti-bacterial agents(under JIS

Z2801:2000 certification) during manufacturing .Compact board should be resistance to

water immersion through permissible increase on thickness and mass <0.60% and board

density >1.35kg/cm3 and fulfilled the criteria of green guard gold certification and

manufactured under EN438-2&3:2005 standard. 12mm thick compact board should be

Moisture resistant, Impact resistant, termite resistant ,Scratch resistant ,Weather and

climatic shock resistant.

Finish of compact laminates should be suede finish which includes door, pilasters and

intermediate panels finished with approved texture/shades as per IS2046 and fulfilled the

MR criteria of fire retardant under BS-476/97 and EN438-6 with classification of BS1D0

standard. Pilaster to be supported with SS(grade316) adjustable foot and intermediate

panels will attached to the wall with the help of approved SS(grade316) channels and all

required hardware, made up of stainless steel as per manufacturer’s specification.. Door

knob, gravity hinges,Thumb turn locksets with occupancy indicators ,coat hooks with door

stoper , U channel, top rail with corner connector, adjustable foot/pedestal,Rubber noice

deafening tape, screw & wall plugs should be approved under the instruction of Engineer-

Digitally signed by DEEPAK

BOQ - CIVIL WORKS Quantity Amount

Sl. No. (DSR- DESCRIPTION UNIT Rate Residential Total Qty DSR Amount NDSR Amount

The top fitting should consist of SS round top rail which will get fixed with pilaster, with SS

panel tube holder ,SS corner bend (connected with top rail ) will be use in corner of cubical

in absence of brick wall, SS wall fixing is used only on the wall which will hold the SS top

rail. All screw will of 304 grade in SS with stain finish. All pilasters are supported by SS

bottom cladding

Toilet cubical with. The base of

standard the stainless

dimension steel bottom cladding will be anchored towhich

of 2025mm(H)x1000mm(W)x1500mm(Depth), the

42.1 includes 600mm door size width or as per drawing. ('L') shape, overall size may vary, please Nos 46450.00 14.00 0.00 14.00 650300.00

quote as per drawings.

Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of

lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required)

extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles

and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour

and design duly reinforced with galvanized mild steel section made of required shape &

size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash

adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304

grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching

polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14,

plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash

& mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly

sealed at all corners, including drilling of holes for fixing hardware and drainage of water

etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with

weather proof silicon sealant over backer rod of approved size and quality, all complete as

per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge.

Section of steel reinforcement and cross sections of uPVC profiles to be as per design

approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/

double glass unit with / without high performance coatings as per design requirements and

conforming to IS: 3548 & IS: 16231 shall be paid separately.

Note:- Structural design proof checked from a Government Engineering Institute, to be

by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 – Part 3

(ii) Sites with structure height more than 20m for all wind speeds

Two track two panels sliding window with Aluminium channel for roller track, wool pile,

9.147.A1 nylon rollers with SS 304 body.

Using R2 series with frame (40mm & above) x (40mm & above) & sash (25mm & above) x

43.1 9.147.A1.1 (50mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height upto sqm 8298.85 2.16 7.92 10.08 83652.41

Digitally signed by DEEPAK

BOQ - CIVIL WORKS Quantity Amount

Sl. No. (DSR- DESCRIPTION UNIT Rate Residential Total Qty DSR Amount NDSR Amount

Providing and fixing factory made uPVC white colour sliding glazed window above 1.50 m in height

dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded

profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll

forming process of required length (shape & size according to uPVC profile), appropriate dimension

of uPVC extruded glazing beads, uPVC extruded interlocks and uPVC extruded Inline sash adaptor (if

required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle on one side of extreme

panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc

alloy (white powder coated) touch lock with hook (if required for wire mesh panel), stainless steel

44 9.147E (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I

fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc.

Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes

for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and

adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required

size and of approved quality, all complete as per approved drawing & direction of Engineer-in-

Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation

inprofile dimension in higher side shall be accepted but no extra paymenton this account shall be

Using R4 series with frame (64mm & above) x (45mm & above) & sash (44mm & above) x

44.1 9.147.A1.3 (55mm & above) with zinc alloy (zamak) powder coated handle on every panel along with sqm 9628.60 110.09 9.00 119.09 1146650.72

multi-point locking system (Height above 1.8m).

Two track four panels sliding windows with Aluminium channel for roller track, wool pile,

zinc alloy (zamak) powder coated handle on three panels along with multi-point locking

45 9.147.A2 system,

nylon rollers with SS 304 body.

Using R3 series with frame (55mm & above) x (40mm & above) & sash (30mm & above) x

Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC

casement window with necessary screws etc. complete.

Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window

with necessary screws etc. complete.

TOTAL (Carried Over to Summary of Civil Works) 2427429.21 680212.85

Digitally signed by DEEPAK

BOQ - CIVIL WORKS Quantity Amount

Sl. No. (DSR- DESCRIPTION UNIT Rate Residential Total Qty DSR Amount NDSR Amount

G 10 STEEL WORK

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels,

plates etc., including welding, grinding, buffing, polishing and making curvature (wherever

required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c

fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel

48 10.28 bolts etc., of required size, on the top of the floor or the side of waist slab with suitable kg 772.40 1845.00 325.00 2170.00 1676108.00

arrangement as per approval of Engineer-incharge, (for payment purpose only weight of

stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,

fasteners etc.).

TOTAL (Carried Over to Summary of Civil Works) 1676108.00 0

H 11 FLOORING WORK

Providing and laying Polished Granite stone flooring in required design and patterns, in

linear as well as curvilinear portions of the building all complete as per the architectural

drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar

49 11.56 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white

cement slurry admixed with pigment of matching shade including rubbing , curing and

polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

49.1 11.56.1 Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent Sqm 4481.30 685.85 48.06 733.91 3288858.94

50 11.24 Extra for pre finished nosing to treads of steps of marble / granite stone. Rmt 719.90 280.83 56.36 337.19 242743.08

Extra for marble / granite stone flooring in treads of steps and risers using single length up

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey

cement slurry mixed with pigment to match the shade of the slab, including rubbing and

52 11.26 polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Polished Shahabad slab flooring over 20 mm (average) thick base laid over and jointed with

grey cement slurry mixed with pigment to match the shade of the slab, including rubbing

53 MR and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : Sqm 1640.00 35.71 35.71 58562.43

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm

(average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement

54 11.27 slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing Sqm 2354.70 5.13 5.13 12081.97

Digitally signed by DEEPAK

BOQ - CIVIL WORKS Quantity Amount

Sl. No. (DSR- DESCRIPTION UNIT Rate Residential Total Qty DSR Amount NDSR Amount

Polised shahabad stone slabs 18 mm thick in risers of steps, skirting, dado and pillars laid

55 MR on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with Sqm 1720.00 5.45 5.45 9375.24

grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing

Providing and complete.

fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness

to be specified by the manufacturer ) of approved make in all colours, shades except

burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting,

56 11.37A risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse Sqm 1112.70 118.30 55.17 173.47 193017.16

sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white

cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be

specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make,

in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed

57 11.38 of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sqm 1315.30 267.20 35.84 303.04 398584.44

sq.m including pointing the joints with white cement and matching pigments etc., complete

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of

approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement

mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm

58 11.46.2 including grouting the joints with white cement and matching pigments etc. The tiles must Sqm 1623.05 579.47 193.07 772.55 1253879.22

be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the

notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet

for placing the tiles gently and easily

Grouting the joints of flooring/wall tiles having joints of 3 mm width, using epoxy grout mix

of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin

59 11.48 per kg), including filling /grouting and finishing complete as per direction of Engineer-in-

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the

manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of

approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid

60 11.47.2 with cement based high polymer modified quick set tile adhesive (water based) conforming Sqm 1893.90 590.73 29.43 620.16 1174522.40 0

to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting

of joints to be made separately). Size of Tile 600x600 mm

I 12 ROOFING WORK

Digitally signed by DEEPAK

BOQ - CIVIL WORKS Quantity Amount

Sl. No. (DSR- DESCRIPTION UNIT Rate Residential Total Qty DSR Amount NDSR Amount

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 stone aggregate 10 mm and down gauge), including

61 12.21 finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per

standard design :

Making khurras 45x45 cm with average minimum thickness of 5cm cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet

62 12.22 1 m x1 m x 400micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) Nos 298.25 12 3 15 4473.75

and a coat of neat cement, rounding the edges and making and finishing the outlet

Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch,

including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I

plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The

sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3%

63 12.47 ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They

shall be of uniform pigmentation and thickness without air pockets and shall conform to IS

10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured

or smooth as specified.

63.1 12.47.1 2 mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6" ) as specified Sqm 1401.35 240.00 240.00 336324.00

GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm

and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm

(both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC

64 12.52.2 (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness Sqm 2068.75 93.95 93.95 194366.56

60 microns (minimum), including factory painted after bending and perforation, and

backed with a black Glass fiber acoustical fleece.

Digitally signed by DEEPAK

BOQ - CIVIL WORKS Quantity Amount

Sl. No. (DSR- DESCRIPTION UNIT Rate Residential Total Qty DSR Amount NDSR Amount

Supply & fixing of Galvalume profile sheet of 1072

mm Supply width and nominal 28.5 mm deep ribs with subtle square fluting in the five

pans at nominal 203 mm centre-to- centre. The end rib shall be designed for anti-capillary

action, to avoid any seepage of water through the lateral overlap. The feed material is

manufactured out of nominal 0.55 mm Base Metal Thickness (BMT) with +/-0.05 mm

Thickness tolerance, Hi-Tensile steel with min. 550 MPa yield strength, metallic hot dip

coated with Aluminum-Zinc alloy (55% Aluminum, 45% Zinc) as per AS 1397 - Zincalume

AZ150 (Min. 150 gms/sq.mt total on both sides) with Super durable Polyester Colorbond

65 MR XRW quality paint coat as per AS/NZS 2728 Class 3 of BlueScope Steel make. The paint will Sqn 1017.20 146.70 146.70 149223.24

have a total coating thickness of nominal 35 μm, comprising of nominal 20 μm exterior coat

on top surface and nominal 5 μm reverse coat on back surface over nominal 5 μm primer

coat on both surfaces of approved colour shade by concern authority. The exposed paint

system’s shall have higher SRI value (Thermatech technology) and use inorganic (lead free)

pigment in paint system.The sheet shall have brand marking of the manufacturer giving

product details on the back of the sheet at every regular interval for confirming genuinity

of the material.

Providing and fixing Flashings/Trims/Gutter of same material as above Girth upto 610 mm

Designing, providing, installing and fixing factory finished custom designed cold form Light Gauge

Steel Framed super structure comprising of steel wall panel, trusses, purlins etc manufactured out of

minimum 0.75 mm thick steel sheet as per design requirements. The steel sheet shall be galvanized

(AZ-150gms Aluminium Zinc Alloy coated steel having minimum yield strength 300-550 Mpa)

conforming to AISI specifications and IBC 2009 for cold formed steel framing and construction and

also as per IS: 875-1987, ISO 800-1984 and IS:801- 1975. The wind load shall be as per provisions of

IS 875 (part -III). LGSFS frame shall be designed as per IS: 801 using commercially available software

such as Frame CAD Pro- 11.7/ STAAD PRO V8i/ArchitekV2.5.16/ Revit architecture-2011 or K.G 285.00 1320.30 1320.30 376285.5

equivalent. Proper usage of Connection Accessories like Heavy Duty Tension Ties, Light Duty Hold-

ons, Twist Straps (to connect truss with wall frames), Strong Tie, Tie Rod, H-Brackets, Boxing

Sections, L-Shaped Angles for better structural stability. The framing section shall be cold form C-type

having minimum web depth 89 mm x 39mm flange x 11mm lip in required length as per structural

design requirement duly punched with dimple/slot at required locations as per approved drawings.

The slots will be along centre line of webs and shall be spaced minimum 250mm away from both

67 ends of the member.

Digitally signed by DEEPAK

BOQ - CIVIL WORKS Quantity Amount

Sl. No. (DSR- DESCRIPTION UNIT Rate Residential Total Qty DSR Amount NDSR Amount

The frame can be supplied in panelized or knock down condition in specific dimensions and

fastened with screws extending through the steel beyond by minimum of three exposed

threads. All self drilling tapping screws for joining the members shall have a Type II coating

in accordance with ASTM B633(13) or equivalent corrosion protection of gauge 10 & 12, TPI

16 & 8 of length 20mm. The frames shall be fixed to RCC slab or Tie beam over Neoprene

rubber using self expanding carbon steel anchor bolt of dia as per approved drawings.

design subject to minimum 12mm diameter and 121mm length conforming to AISI 304 and

316 at 500mm c/c with minimum embedment of 100mm in RCC (RCC to be paid separately)

and located not more than 300mm from corners or termination of bottom tracks complete

in all respects. The item also includes the submission of stability reports duly examined

and issued by any NIT/IIT. The rate includes the concept design, detailed design, fabrication

of sections, transportation, installation and all required fixing arrangement at site as

described above.

TOTAL (Carried Over to Summary of Civil Works) 632385.10 543475.82

J 13 FINISHING WORK

68 13.4 12 mm cement plaster of mix :

69 13.12 18 mm cement plaster of mix :

70 13.16 6 mm cement plaster of mix :

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to

prepare the surface even and smooth complete.

72 13.45 Finishing walls with textured exterior paint of required shade

New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat

of exterior primer applied @ 2.20kg/10 sqm

Providing and applying white cement based putty of average thickness 1 mm, of approved

73 13.80 brand and manufacturer, over the plastered wall surface to prepare the surface even and Sqm 156.05 2077.83 185.56 2263.39 353201.95

smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile

Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture,

74 13.83 including applying additional coats wherever required to achieve even shade and colour.

Distempering with oil bound washable distemper of approved brand

75 13.41 and manufacture to give an even shade :

New work (two or more coats) over and including water

thinnable priming coat with cement primer

Digitally signed by DEEPAK

BOQ - CIVIL WORKS Quantity Amount

Sl. No. (DSR- DESCRIPTION UNIT Rate Residential Total Qty DSR Amount NDSR Amount

Painting with synthetic enamel paint of approved brand and manufacture of required

colour to give an even shade :

Two or more coats on new work over an under coat of suitable shade with ordinary paint

of approved brand and manufacture

Providing & fixing GRC Jali in Approved Design work at Stilt Floor as per the specification

TOTAL (Carried Over to Summary of Civil Works) 7608919.84 562762.41

Digitally signed by DEEPAK

BOQ - CIVIL WORKS Quantity Amount

Sl. No. (DSR- DESCRIPTION UNIT Rate Residential Total Qty DSR Amount NDSR Amount

K STRUCTURAL GLAZING ALUMINIUM COMPOSITE PANEL

Providing and supplying aluminium extruded tubular and other aluminium sections as per

the architectural drawings and approved shop drawings , the aluminium quality as per

grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80

microns conforming to AAMA 2604 of required colour and shade as approved by the

78 25.1 Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. Kg 414.3 900 900 372870.00

necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on

this account). The weight of aluminium extruded section shall be taken for purpose of

Supplying and installing UPVC- double glazing curtain wall made out of Lead free green

profile having BIS/European standard UPVC multi chambered sections of wall thickness

2.4mm with corners fusion welded, fully reinforced with Galvanized steel 1.5mm/2mm

including interlock profile, glazing bead, grooving bead, brush seal, angle Cleats Fix to civil

structure with M.S. Brackets anchored with screws & Fasteners where necessary. Providing

and fixing double glazed hermetically sealed glazing with 6 mm thick toughened heat

resistant refractive glass of required shade on outside and 6mm clear toughened glass on

79 MR inside, having 12 mm air gap in between. Necessary molecular sieve should be incorporated Sqm 12,782.35 45 45 575205.75

in the double glazing unit (D.G.U.) to absorb possible moisture content to make the glass

moisture free under critical weather conditions. Including providing EPDM gasket,

perforated spacers, desiccants, sealant (Both primary and secondary sealant) etc. (The

composite glass should have Minimum solar factor = 38, shading co-efficient = 0.44 and u-

factor = 2.69) Finished and complete as per specifications, drawings and direction of

Engineer-in-charge.

TOTAL (Carried Over to Summary of Civil Works) 372870 575205.75

L 22 WATER PROOFING

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by

applying cement slurry mixed with water proofing cement compound consisting of applying

: (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement

compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second

80 22.5 layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ Sqm 617.05 115.23 42.59 157.82 97382.72

0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing

for 48 hours. (The rate includes preparation of surface, treatment and sealing of all joints,

corners, junctions of pipes and masonry with polymer mixed slurry.)

Digitally signed by DEEPAK

BOQ - CIVIL WORKS Quantity Amount

Sl. No. (DSR- DESCRIPTION UNIT Rate Residential Total Qty DSR Amount NDSR Amount

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry

mixed with water proofing cement compound consisting of applying: (a) after surface

preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing

cement compound @ 0.253 kg/sqm (b) laying second layer of Fibre glass cloth when the

first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c)

third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with

81 22.6 water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This Sqm 688.9 1296.28 284.2212 1580.50 1088807.28

will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire

treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all

around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for

separately. For the purpose of measurement the entire treated surface will be measured.

TOTAL (Carried Over to Summary of Civil Works) 1186190.00 0

Digitally signed by DEEPAK

BOQ - CIVIL WORKS Quantity Amount

Sl. No. (DSR- DESCRIPTION UNIT Rate Residential Total Qty DSR Amount NDSR Amount

EXTERNAL DEVELOPMENT

SH-1 EARTH WORK

Earth work in Excavation by mechanical means (Hydraulic excavator)/manualmeans over

areas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting

83 2.6 out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by

Engineer-in-charge.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations

84 2.25 etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming Cum 196 357.6895 357.69 70107.14

and watering, lead up to 50 m and lift upto 1.5 m.

Excavating, supplying and filling of local earth (including royalty) by mechanical transport

85 2.25(a) upto a lead of 5km also including ramming and watering of the earth in layers not Cum 700.5 92.5379 92.54 64822.80

exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

4 CONCRETE WORKS

Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone

aggregate 40 mm nominal size derived from natural sources)

5 REINFORCED CEMENT CONCRETE WORK

87 5.9 Centering and shuttering including strutting, propping etc. and removal of form for :

87.1 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. sqm 392.15 246.96 246.96 96845.36

87.2 5.9.5 Lintels, beams, plinth beams, girders, bressumers and cantilevers sqm 736.4 239.94 239.94 176691.82

87.3 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. sqm 961.3 299.88 299.88 288274.64

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position

and binding all complete upto plinth & above plinth level.

88.1 5.22.6 Thermo-Mechanically Treated bars. Kg 107.85 6450 6450 695632.50

Providing and laying in position machine batched and machine mixed design mix M-25

grade cement concrete for reinforced cement concrete work, using cement content as per

approved design mix, including pumping of concrete to site of laying but excluding the cost

89 5.33 of centering, shuttering, finishing and reinforcement, including admixtures in

recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve

workability without impairing strength and durability as per direction of Engineer-in-

All works upto plinth level. Concrete of M25 grade with minimum cement content of 330 kg

All works above plinth level upto floor V level. Concrete of M25 grade with minimum

cement content of 330 kg /cum

Digitally signed by DEEPAK

BOQ - CIVIL WORKS Quantity Amount

Sl. No. (DSR- DESCRIPTION UNIT Rate Residential Total Qty DSR Amount NDSR Amount

Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level up

to floor V level in all shapes and sizes in :

91.1 6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 9105.95 41.20 41.20 375165.14

92 13.12 18 mm cement plaster of mix :

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of

required shade:

New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of

exterior primer applied @ 2.20 kg/10 sqm)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in

94 10.25 position and applying a priming coat of approved steel primer using structural steel etc. as

94.1 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works Kg 172.6 4014 4014 692816.40

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia

10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length,

upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and

with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to

95 16.53 retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all Mtr 375.8 341 341 128147.80

complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) /

Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52

mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid

Digitally signed by DEEPAK

BOQ - CIVIL WORKS Quantity Amount

Sl. No. (DSR- DESCRIPTION UNIT Rate Residential Total Qty DSR Amount NDSR Amount

SH 16 ROAD WORK

Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be

moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having

electronically welded micro- prismatic lens with abrasion resistant coating as approved by

Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance

with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/-5) degress to base

.The reflective panels on both sides with at least 12 cm of reflective area up each side. The

luminance intensity should be as per the specification and shall be tested as described in

ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road

surface using the adhesive conforming to IS, as per procedure recommended by the

manufacturer complete and as per direction of Engineer-in-charge.

Construction of granular sub-base by providing close graded Material conforming to

specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by

tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness

97 16.78 with motor grader on prepared surface and compacting with vibratory power roller to

achieve the desired density, complete as per specifications and directions of Engineer-in-

With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to

0.075 mm ) to wet mix macadam (WMM) specification including premixing the material

with water at OMC in for all leads & lifts, laying in uniform layers with mechanical

98 16.79 paverfinisher in sub- base / base course on well prepared surface and compacting with Cum 2,914.30 69 69 201086.70

vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per

specifications and directions of Engineer-in-Charge.

Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching

plant. The ready mixed concrete shall be laid and finished with screed board vibrator ,

99 16.75 vacuum dewatering process and finally finished by floating, brooming with wire brush etc. Cum 9823.8 69 69 677842.20

complete as per specifications and directions of Engineer-incharge. (The panel shuttering

work shall be paid for separately).

1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone

aggregate 40 mm nominal size derived from natural sources)

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed

with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing

101 11.2 and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse

101.1 11.20.3 Dark shade pigment using ordinary cement Sqm 1119.5 278.51 278.51 311788.03

Digitally signed by DEEPAK

BOQ - CIVIL WORKS Quantity Amount

Sl. No. (DSR- DESCRIPTION UNIT Rate Residential Total Qty DSR Amount NDSR Amount

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position

and binding all complete upto plinth & above plinth level.

Providing and fixing Automatic Boom Barrier of 6m of approved manufacturer's

Providing and Fixing Acrylic letters with LED module back light and sunboard( engilish and

hindi) both languages as per direction of engineer incharge.

B 2 HORTICULTURE AND LAND SCAPING (SOFTSCAPE)

Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of

serviceable materials and then disposing of surplus soil, by spreading and neatly levelling

105 2.1 within a lead of 50 m and making up the trenched area to proper levels by filling with earth cum 68.7 1,115.00 1,115.00 76600.50

or earth mixed with sludge or / and manure before and after flooding trench with water

(excluding cost of imported earth, sludge or manure).

Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead

complete (earth measured in stacks will be reduced by 20% for payment).

Supplying and stacking at site dump manure from approved source, including carriage upto

107 2.4 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) :

107.1 2.4.3 Screened through sieve of I.S. designation 4.75 mm cum 287.75 27 27 7769.25

108 2.5 Rough dressing the trenched ground including breaking clods. sqm 1.3 247.00 247.00 321.10

Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water

including disposal of uprooted vegetation.

110 2.7 Fine dressing of the ground. sqm 3.25 235.00 235.00 763.75

Spreading of sludge, dump manure and/or good earth in required thickness as per

111 2.8 direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid cum 46.15 79 79 3645.85

Mixing earth and sludge or manure in the required proportion specified or directed by the

Officer-in-charge

Grassing with selection No. 1/ Doob grass including watering and maintenance of the lawn

113 2.1 for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing

including supplying good earth, if needed (the grass and good earth shall be paid for

113.1 2.10.1 separately).

In rows 5 cm apart in both directions sqm 15.55 22 22 342.10

Digitally signed by DEEPAK

BOQ - CIVIL WORKS Quantity Amount

Sl. No. (DSR- DESCRIPTION UNIT Rate Residential Total Qty DSR Amount NDSR Amount

Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the

excavated base to a further depth of 30 cm, refilling the excavated earth after breaking

clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of

earth after reduction by 20% : one part of stacked volume of sludge or manure after

114 2.13 reduction by 8%), flooding with water, filling with earth if necessary, watering and finally cum 195.9 34 34 6660.60

fine dressing, leveling etc. including stacking and disposal of materials declared

unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50

m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with

manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after

reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with

115 2.14 water, dressing including removal of rubbish and surplus earth, if any, with all leads and

lifts (cost of manure, sludge or extra good earth if needed to be paid for separately)

115.2 2.14.2 Holes 90 cm dia, and 90 cm deep Each 130.4 1 1 130.40

115.3 2.14.3 Holes 60 cm dia, and 60 cm deep Each 39.95 2 2 79.90

115.4 2.14.4 Holes 45 cm dia, and 45 cm deep. Each 17.1 2 2 34.20

Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of

existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and

116 2.33 than rolling the surface with light roller make the surface smoothen and light waterning Per Sqm 211.25 147.00 147.00 31053.75

with sprinkler and maintenance for 30 days or more till the grass establish properly, as per

direction of officer-in-charge.

Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness of existing

ground prepared with proper level and ramming with required tools wooden and than

117 2.34 rolling the surface with light roller make the surface smoothen and light watering the same Per Sqm 84.35 8 8 674.80

maintenance for 30 days or more till the grass establish properly,as per direction of officer

Removal of garden waste by TATA 407 or equivalent including loading/unloading and

118 2.6 carriage upto 1 km lead,complete disposal upto designated place as per direction of officer- Per Trip 373 4 4 1492.00

Supplying and spreading of sand in lawn area, including watering, and dressing complete.

Providing and Displaying of Aglaonema Sam ht.30 cm well developed three in one, having

120 3.6 18 to 20 fresh, healthy and attractive colorful leaves in 35 cm size Earthen pot/Chali/Tray & Each 307.5 2 2 615.00

as per direction of the officer-in-charge.

Digitally signed by DEEPAK

BOQ - CIVIL WORKS Quantity Amount

Sl. No. (DSR- DESCRIPTION UNIT Rate Residential Total Qty DSR Amount NDSR Amount

Providing and displaying of Araucaria cookie having ht. 1.80 m to 1.95 m, straight, well

121 3.17 developed, fresh and healthy with lush green leaves from bottom to top in 30 cm size of Each 563.75 4 4 2255.00

Earthen pot/Plastic pot & as per direction of the officer-in-charge.

Providing and displaying of Areca Palm having ht. 2.40 m to 2.70 m with 12 to 14 suckers,

122 3.22 well developed, fresh and healthy with lush green foliage in 35 cm size of Bucket type Each 592.45 3 3 1777.35

cement pots & as per direction of the officer-in-charge.

Providing and displaying of Croton Petra Bangalore variety having ht. 60 cm to 75 cm with 4

123 3.38 to 6 branches, well developed, fresh and healthy colorful leaves in 25 cm size of Earthen Each 344.4 10 10 3444.00

pot/Plastic pot & as per direction of the officer-in-charge.

Providing and displaying of Croton Petra Bangalore (Specimen ) variety having ht. 60 cm to

75 cm with 4 to 6 branches, well developed, fresh & healthy foliage approximately 60-65

124 3.39 leaves in 30 cm size of Earthen pot/ Plastic pot & as per direction of the officer-in-charge. Each 538.15 4 4 2152.60

Providing and Displaying Antirrhinum Hybrid dwarf variety, specimen (8-10) with fresh &

125 4.4 healthy foliage in full bloom well developed in 35 cm Earthen Tray/Challi Pot and as per Each 538.15 3 3 1614.45

direction of the officer-in-charge.

Providing and Displaying Cyclamen hybrid variety specimen 5-6 in a pot, fresh & healthy in

126 4.23 full bloom well developed in 35 cm Earthen Tray/ Nand. as per direction of the officer-in- Each 807.7 2 2 1615.40

Providing and Displaying Dianthus dwarf specimen 6-8 in a pot with fresh & healthy foliage

127 4.28 in full bloom well developed in 35 cm Earthen Tray/Nand as per direction of the officer-in- Each 377.2 3 3 1131.60

Providing and Displaying Helianthus different colour with full bloom (3 in one) fresh &

128 4.34 healthy in 25 cm Earthen Pot/Plastic Pot well developed as per direction of the officer-in- Each 215.25 1 1 215.25

Providing and Displaying Pansy Hybrid Sakata in different colour specimen 6-8 in a pot with

129 4.46 fresh & healthy foliage in full bloom well developed in 35 cm Earthen Tray/ Nand as per Each 322.9 1 1 322.90

direction of the officer-in-charge.

Providing and Displaying Primula Hybrid variety specimen 5-6 in each Pot with fresh &

130 4.56 healthy foliage in full bloom different colour well developed in 35 cm Earthen Tray/ Nand Each 430.5 1 1 430.50

as per direction of the officer-in-charge.

Providing and Displaying Ranunculus Hybrid variety in different colour specimen 5-6 in each

131 4.58 Pot with fresh & healthy foliage in full bloom well developed in 35 cm Earthen Tray/ Nand Each 516.6 4 4 2066.40

as per direction of the officer-in-charge.

Providing and Displaying Budded Rose (H.T. variety) 3 to 4 healthy branch 30 cm and above

132 4.91 ht. well developed with one and above flower plant in 20 cm Earthen Pot, as per direction Each 32.8 1 1 32.80

of the officer-in-charge.

Digitally signed by DEEPAK

BOQ - CIVIL WORKS Quantity Amount

Sl. No. (DSR- DESCRIPTION UNIT Rate Residential Total Qty DSR Amount NDSR Amount

Providing and Displaying Creeper Rose variety 3 to 4 healthy branch 60 cm and above ht.

133 4.92 well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the Each 75.85 1 1 75.85

officer-in-charge.

Providing and Displaying Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and

134 4.93 above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per Each 150.7 1 1 150.70

direction of the officer-in-charge.

Providing and Displaying Bamboo Buddha valley with fresh & healthy 3 to 4 suckers having

135 5.7 75 to 90 cm ht. in 25 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in- Each 461.25 1 1 461.25

Providing and Displaying Bird of paradise well developed with fresh & healthy 90 to 120 cm

ht in 30 cm Earthen Pot/ Plastic Pot as per direction of the officer-in-charge.

Providing and Displaying Bismarckia Palm 115 to 180 cm ht., well developed 12 and above

137 5.11 good color fresh and healthy leaves in 40 cm Cement Pot as per direction of the officer-in- Each 1,937.25 5 5 9686.25

Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry

138 5.12 Blossom etc. well developed with fresh & healthy bushy in full bloom 75 to 90 cm ht. in 40 Each 322.9 5 5 1614.50

cm Cement Pot as per direction of the officer-in-charge.

Providing and Displaying Ficus black vivion piller topiary (sylinder type) well developed with

139 5.2 fresh & healthy 180 to 210 cm ht in 40 cm Cement Pot as per direction of the officer-in- Each 2,050.00 4 4 8200.00

Providing and Displaying Ficus Nuda topiary well developed with fresh & healthy 5 to 6 big

140 5.22 ball specific size and shape 180to 210cm ht in 40 cm Cement Pot as per direction of the Each 2,593.25 4 4 10373.00

officer-in-charge.

Providing and stacking of Euphorbia milli hybrid variety, having ht. 30 cm to 45 cm with

141 6.14 multi branch, full bloom, fresh and healthy leaves in 30 cm size of Earthen Pot/Plastic Pot & Each 107.65 6 6 645.90

as per direction of the officer-in-charge..

Providing and stacking of Adansonia digitata (kalp vricksh) of ht 150-165 cm in bag size of

25 cm as per direction of the officer-in-charge.

Providing and stacking of Azadirachta indica ( Neem ) of height 120-130cm in big polybag of

size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Bauhinia purpurea (Kachnar) of height 150-165 cm. in big poly

bags of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Bombax ceiba of height 150-165 cm. in big poly bags of size 25 cm

as per direction of the officer-in-charge.

Providing and stacking of Bottle palm of ht. 270-300 cm bottom girth 40-50 cm well

developed in big HDPE bags as per direction of the officer-in-charge

Providing and stacking of Cassia fistula (Amaltash) of height 120-135 cm. in big poly bags of

size 25 cm as per direction of the officer-in-charge.

Digitally signed by DEEPAK

BOQ - CIVIL WORKS Quantity Amount

Sl. No. (DSR- DESCRIPTION UNIT Rate Residential Total Qty DSR Amount NDSR Amount

Providing and stacking of Delonix regia (Gulmohar) of height 150-165 cm. in big poly bags of

size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Ingla dulcis (Jungle Jalebi) of height 150-165 cm. in big poly bags

of size 25 cm as per direction of the officer-in-charge

Providing and stacking of Jacaranda mimosifolia of height 150-165 cm. in big poly bags of

size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Michelia champa (Golden Champa) of height 90- 105 cm. in

earthen pots of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Mimusops elengi (Maulsri) of height 180-195 cm., well developed

152 7.59 with thick stem in big in big size HDPE bag as per direction of the officer-in-charge. Each 125 2 2 250.00

Providing and stacking of Nauclea cadamba (Kadam) of height 150-165 cm. in big poly bag

of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Phoenix sylvestris Roxb. (Wild date palm/khajur) of height 150-

165 cm. in Big HDPE Bag as per direction of the officer-in-charge.

Providing and stacking of Phyllanthus emblica (Amla) of height 150-165 cm. in Big HDPE Bag

as per direction of the officer-in-charge.

Providing and stacking of Tectona grandis (Teak) of height 150-165 cm. in big polybags of

size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Terminalia arjuna of height 150-165 cm. in big polybags of size 25

cm as per direction of the officer-in-charge.

Providing and stacking of Calliandra hybrida of height 105-120 cm., well branched, bushy in

big size HDPE bag as per direction of the officer-in-charge.

Providing and stacking of Cassia biflora of height 90-105 cm., well branched, bushy in big

size HDPE bag as per direction of the officer-in-charge.

Providing and stacking of Dombeya mastersii of height 60-75 cm. with 4-5 branches in bag

of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Ficus blackii (F.vivion) (bushy) of height 150-165 cm. with 8-10

161 8.23 branches and healthy foliage in earthen pots of size 30 cm as per direction of the officer-in- Each 250 3 3 750.00

Providing and stacking of Ficus panda of height 90-105 cm. with 10-12 branches and healthy

162 8.28 foliage, well formed in cement pots of size 30 cm as per direction of the officer-in-charge. Each 225 3 3 675.00

Providing and stacking of Hibiscus variegated of height 60-75 cm. with 8-10 branches and

163 8.39 healthy variegated foliage in cement pots of size 35 cm as per direction of the officer-in- Each 180 4 4 720.00

Providing and stacking of Tabernaemontana coronaria (Chandni single) veriegated of height

164 8.63 105-120 cm., multibranched, bushy in big size HDPE bag as per direction of the officer-in- Each 110 2 2 220.00

Digitally signed by DEEPAK

BOQ - CIVIL WORKS Quantity Amount

Sl. No. (DSR- DESCRIPTION UNIT Rate Residential Total Qty DSR Amount NDSR Amount

Providing and stacking of Allamanda cathartica of height 30 cm to 45 cm.in 20 cm size of

Earthen pots / Plastic pots & as per direction of the officer-in-charge.

Providing and stacking of Allamanda violacea of height 30 cm to 45 cm. in poly bag of size

20 cm as per direction of the officer-in-charge.

Providing and stacking of Bignonia venusta (Golden shower) of height 30 cm to 45 cm. in 20

cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.

Providing and stacking of Bougainvillea (Variety Butiana, Lady Mary

Baring,Mahara,Mohan,Scarlet Queen, Variegated, Glabra Formosa, Peruviana Odissi,

168 9.4 Paratha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) of height 30 cm. to 45 cm. with 2- Each 40 4 4 160.00

3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-

Providing and stacking of Passiflora caerulea (Rakhi bel) of height 30 cm to 45 cm. in 20 cm

size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.

Providing and stacking of winter seasonal seedling/cutting at site of work well developed

170 10.1 and healthy free from disease in per tray and each tray having 100 Nos plants as per

direction of the officer-in-charge.

170.2 10.1.2 Antirrhinum dwarf Per Tray 600 5 5 3000.00

170.3 10.1.3 Aster dwarf Per Tray 500 6 6 3000.00

170.4 10.1.4 Brachycome Per Tray 500 2 2 1000.00

170.5 10.1.6 Carnation (double) Dutch Per Tray Per Tray 1,000.00 3 3 3000.00

170.6 10.1.7 Carnation (double) Lilliput Per Tray Per Tray 1,200.00 5 5 6000.00

170.7 10.1.18 Gerbera hybrid double Per Tray 2,200.00 6 6 13200.00

TOTAL (Carried Over to Summary of Civil Works) 66,03,771.34 6,64,534.00

FURNITURE WORKS

Digitally signed by DEEPAK

BOQ - CIVIL WORKS Quantity Amount

Sl. No. (DSR- DESCRIPTION UNIT Rate Residential Total Qty DSR Amount NDSR Amount

Providing & fixing table having an overall size of (2000x1100x750) with top made of 36mm thick

board pressed with 0.4mm thick membrane foil clad pressed with PU glue. The foil shall be Pre-

coated with a layer of polyurethane for better scratch resistance. The main table shall have

understructure having verticals made of 36mm thick post formed legs supported with 32(D) steel

studs duly powder coated and modesty made of 18mm thick prelaminated particle board having

decorative laminate on both side. Side Unit: Providing & Fixing side Unit having overall size

(1200x565x690)x 600mm without top & 1250mm with top made of 36mm thick board pressed with

0.4mm thick membrane foil clad pressed with PU glue. The foil shall be pre-coated with a layer of

171 MR polyurethane for better Scratch resistance. Side unit shall have understructure having verticals made Each 110000.00 1.00 1.00 110000.00

of 25mm thick post formed and made of 18mm thick prelaminated Particle board having decorative

laminate. Back Unit : Providing & fixing Back Unit having overall size (3000x490x750) and top made

of 36mm thick board pressed with 0.4mm thick membrane foil and pressed with PU glue. The foil

shall be pre-coated with a layer of polyurethane for better scratch resistance. Storage unit of size

2550 x 500 x 714 shall have understructure having verticals made of 18mm thick prelaminated

particle with 2 open able shutter storage and drawer fascia in membrane finish and glass.

Wooden Table of size 4' x 2.5'x2.5'having three drawers on R.H.S. made of sheesham wood,

sunmica top, complete in all respect with polish(melamine)

Wooden Table of size 4' x 6' x 2.5' having three drawers on R.H.S. made of Teakwood,

Teakwood top, complete in all respect with polish(melamine)

Providing & Fixing overhead storage units wall/partition hung made up of 18mm

prelaminated particle board having two open able shutters with all exposed edges sealed

174 MR with 2mm PVC edge banding tape & with proper Sqm 17000.00 10.00 10.00 170000.00

locking arrangement. The depth of the overhead shall be 350mm with height as 400mm.

Providing & fixing of Storage Unit of 750mm -1200mm height x 450mm depth having top

made of 25mm thick post formed particle board flat pressed three layered medium density

grade-II confirming to IS : 3087 and understructure made of 18mm thick prelaminated

175 MR particle board three layered medium density grade-II type -II confirming to IS : 12823 having Sqm 18000.00 10.00 10.00 180000.00

two open able shutters. All exposed edges of PLPB shall be sealed with PVC edge banding

tape. The unit shall have proper locking arrangement with duplicate keys.

Chair for court rooms/ section Upholstery/Frame: Leatherite/Fabric with double ply with

foam & polyfill. Arms: wooden arms with Melamine polish with chrome plated end caps on

176 MR both handles. Height Adjustment: Gas Lift Base: Steel Inserted in Chrome plated Base Each 13000.00 25.00 25.00 325000.00

Supplying and assembling executive high back revolving steel chairs with arms tilting back

adjustment mechanism having high density molded PU foam padded seat and back with

177 MR fabric backing complete as per the salient technical features, specifications, design and Each 25000.00 1.00 1.00 25000.00

drawings as approved by Officer – in – Charge

Digitally signed by DEEPAK

BOQ - CIVIL WORKS Quantity Amount

Sl. No. (DSR- DESCRIPTION UNIT Rate Residential Total Qty DSR Amount NDSR Amount

WOODEN DIAS : Providing and fixing Wooden Dais of size 600 x 600 x 1420 mm height in as

per the detail specification given below. Top (size 600 x 600mm ) side (size 600 x 1420

mm),front side (size 600 x 1420 mm) made up in 19 mm thick marine grade ply of requisite

manufacturer's viz.Green/ Anchor /Century or equivalent approved make generally

confirming to I.S 710-2010 including necessary facias etc.with necessary lipping (BTC),

mouldings as required including cutting, fixing, finished with 1 mm thick laminate of

approved make, type,colour & shade of glossy /Matt/ Suede/ Fine/ Line/wood grain

178 MR finished lamiiution pattern with /without grooves as required to exposed surface & edges Each 20000.00 2.00 2.00 40000.00

and the internal / hidden surface shall be finished with 0.80 mm thick laminate of

approved make.Area other than laminated surfaces shall be finished with two coats of

french polish of approved shade. Antitermite treatment to plywood and woodwork with

ten years guarantee bond etc. including all leads and liHs etc. complete as per drawing of

Dais and as per the instructions of the Architect & Engineer-in-Charge

Providing & fixing wooden railing with vertical & horizontal post and hand rail including all

179 MR necessery fitting with melamine polish on top as per the direction of Engineer-In-Charge sqm 9900.00 12.00 12.00 118800.00

TOTAL (Carried Over to Summary of Civil Works) 0.00 10,38,800.00

Digitally signed by DEEPAK

COST OF ELECTRICAL WORK

S. No. Description of item Schedule Item DSR - 2022 Market Rate

A MAIN DISTRIBUTION BOARDS 220776.17 522800.00

C HOT DEEP GI CABLE TRAYS & GI RACEWAYS 243750.89 0.00

D EARTHING 185069.49 0.00

E. INTERNAL WIRING: 2457912.58 16160.00

G LIGHTING FIXTURE AND FANS 0.00 865491.00

H UPS/INVERTER 0.00 703149.00

TOTAL COST FOR DSR + MR 6683890.54

Digitally signed by DEEPAK

SCHEDULE OF QUANTITY INTERNAL ELECTRICAL

2022) QTY. QTY. Total DSR Multiplying DSR MR MR

Description Unit (Court) (Quarters) Qty Rate factor 6.33% Amount Rate Amount Remarks

MAIN PANEL FOR NBCC COURT & RESIDENTIAL QTRS.

Design, manufacture, supplying fixing in position of

the following front operated cubicle type, front access,

dead back, 2mm thick steel enclosed free standing,

dust and vermin proof, switchboard with IP42

protection with hinged and lockable doors complete

with interconnections, tinned copper crimping lugs,

bonding to earth and painting, suitable for use at 415

volts, 3 phase 4 wire 50 Hertz system, and suitable for

a fault level of 25 kA symmetrical at 415 volts.

1 No. 125 amps 4P 25 kA, Moulded Case Circuit

Breaker with TM Release

Metering & Indication

VAF digital electronic meter with inbuilt selector

switch and 125/5 Amps suitable VA, CL 1 CTs . - 1 Set

1 set of R,Y,B phase indicating lamps each with 3 nos.

Phase indicating light shall be protected by 6A MCB. -

150 Amps 4 Pole 25 kA for 1 sec. AL. bus bars with

heat coloured shrinkable insulation sleeve. - 1 Set

2 No. 63amps 4P MCCB 25kA outgoing feeder .

10 No. 40 amps 4P MCB 16kA outgoing feeder .

4 No. 63 amps 4P MCB 16kA outgoing feeder .

Digitally signed by DEEPAK

2022) QTY. QTY. Total DSR Multiplying DSR MR MR

Description Unit (Court) (Quarters) Qty Rate factor 6.33% Amount Rate Amount Remarks

Notes: a. All MCCBs shall be of 25 KA breaking capacity

and suitable for motor duty application.

b. Provision shall be made for providing potential free

contacts to all pumps starters for connection to BAS

c. Provision shall be made to ensure system protection

from dry running of the pump

d. main Panel is of TTA type & sub panels Should be

NBCC COURT& RES. QTRS. PANEL_as described above.

2 MR MDB-UPS PANEL

Design, manufacture, supplying fixing in position of

the following front operated cubicle type, front access,

dead back, 2mm thick steel enclosed free standing,

dust and vermin proof, switchboard with IP42

protection with hinged and lockable doors complete

with interconnections, tinned copper crimping lugs,

bonding to earth and painting, suitable for use at 415

volts, 3 phase 4 wire 50 Hertz system, and suitable for

a fault level of 25 kA symmetrical at 415 volts . It

should be complete with in all respects as per

techinical specifications.

1No. 63 amps 4P 25 kA, Moulded Case Circuit Breaker

with TM release

Digital electronic VAF meter with and 63/5 Amps 5 VA,

CL 1 CTs . - 1 Set

Additional earth fault protection will be provided in

all incoming MCCBs.

Digitally signed by DEEPAK

2022) QTY. QTY. Total DSR Multiplying DSR MR MR

Description Unit (Court) (Quarters) Qty Rate factor 6.33% Amount Rate Amount Remarks

Metering & Indication

1 set of R,Y,B phase indicating lamps each with 3 nos.

Phase indicating light shall be protected by 6A MCB. -

100 Amps 4 Pole 25 kA for 1 sec. copper bus bars with

heat coloured shrinkable insulation sleeve. - 1 Set

4 No. 32 amps DP MCB 16kA outgoing feeder.

4 No. 40 amps 4 Pole MCB 16kA outgoing feeder.

Notes: a. All MCCBs shall be of 25 KA breaking capacity

and suitable for motor duty application.

b. Provision shall be made for providing potential free

contacts to all pumps starters for connection to BAS

c. Provision shall be made to ensure system protection

from dry running of the pump

d. main Panel is of TTA type & sub panels Should be

Note : CPRI/NABL Test reports (65 KA short ckt +IP 65

test) for ach panel has to be submitted to

2.1 MDB-U1 PANEL_as described above. Set 1 1 0 91119 91119 MR

3 MR MDB-LIFT PANEL

Digitally signed by DEEPAK

2022) QTY. QTY. Total DSR Multiplying DSR MR MR

Description Unit (Court) (Quarters) Qty Rate factor 6.33% Amount Rate Amount Remarks

Design, manufacture, supplying fixing in position of

the following front operated cubicle type, front access,

dead back, 2mm thick steel enclosed free standing,

dust and vermin proof, switchboard with IP42

protection with hinged and lockable doors complete

with interconnections, tinned copper crimping lugs,

bonding to earth and painting, suitable for use at 415

volts, 3 phase 4 wire 50 Hertz system, and suitable for

a fault level of 25 kA symmetrical at 415 volts . It

should be complete with in all respects as per

techinical specifications.

1No. 100 amps 4P 25 kA, Moulded Case Circuit Breaker

with TM release

Digital electronic VAF meter with and 100/5 Amps 5

VA, CL 1 CTs . - 1 Set

Additional earth fault protection will be provided in

all incoming MCCBs.

Metering & Indication

1 set of R,Y,B phase indicating lamps each with 3 nos.

Phase indicating light shall be protected by 6A MCB. -

150 Amps 4 Pole 25 kA for 1 sec. copper bus bars with

heat coloured shrinkable insulation sleeve. - 1 Set

2 No. 25 amps DP MCB 16kA outgoing feeder.

3 No. 63 amps 4 Pole MCCB 16kA outgoing feeder.

Notes: a. All MCCBs shall be of 25 KA breaking capacity

and suitable for motor duty application.

Digitally signed by DEEPAK

2022) QTY. QTY. Total DSR Multiplying DSR MR MR

Description Unit (Court) (Quarters) Qty Rate factor 6.33% Amount Rate Amount Remarks

b. Provision shall be made for providing potential free

contacts to all pumps starters for connection to BAS

c. Provision shall be made to ensure system protection

from dry running of the pump

d. main Panel is of TTA type & sub panels Should be

Note : CPRI/NABL Test reports (65 KA short ckt +IP 65

test) for ach panel has to be submitted to

3.1 MDB-LIFT PANEL_as described above. Set 1 1 0 171406 171406 MR

2 DISTRIBUTION BOARDS

Supplying and fixing following way, single pole and

neutral, sheet steel, MCB distribution board, 240 V, on

surface/ recess, complete with tinned copper bus bar,

4 2.3 neutral bus bar, earth bar, din bar, interconnections,

powder painted including earthing etc. as required.

(But without MCB/RCCB/Isolator)

Supplying and fixing following way, horizontal type

three pole and neutral, sheet steel, MCB distribution

board, 415 V, on surface/ recess, complete with tinned

5 2.4 copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing

etc. as required. (But without MCB/RCCB/Isolator)

5.4 MR 12 way (4 + 36), Double door Each 1 1 0 16236 16236 MR

Digitally signed by DEEPAK

2022) QTY. QTY. Total DSR Multiplying DSR MR MR

Description Unit (Court) (Quarters) Qty Rate factor 6.33% Amount Rate Amount Remarks

Supplying and fixing 5 amps to 32 amps rating, 240

volts, 'C' series, miniature circuit breaker suitable for

6 2.1 inductive load of following poles in the existing MCB

DB complete with connections, testing and

commissioning etc. as required.

Supplying and fixing single pole blanking plate in the

existing MCB DB complete etc. as required.

Supplying and fixing following rating, double pole,

(single phase and neutral), 240 V, residual current

circuit breaker (RCCB), having a sensitivity current 30

8 2.14 mA in the existing MCB DB complete with

connections, testing and commissioning etc. as

Supplying, fixing, connecting, testing and

commissioning of following rating, ISI marked (IS 8828)

240 / 415 volts, 10 KA, Miniature Circuit Breaker

9 MR (MCB) of single / double / three / four poles in the

existing MCB DB or in existing MS enclosure complete

in all respects.

9.2 MR 63Amp. FP MCB Each 2 2 0 4799 9598 MR

TOTAL CARRIED TO SUMMARY 220776.17 522800

Supply of XLPE insulated and PVC sheathed

Aluminium/Copper conductor armoured cable of 1.1

10 MR KV grade confirming to IS : 7098:1988 with upto date

amendments of following sizes:-

Digitally signed by DEEPAK

2022) QTY. QTY. Total DSR Multiplying DSR MR MR

Description Unit (Court) (Quarters) Qty Rate factor 6.33% Amount Rate Amount Remarks

Supply of XLPE insulated and PVC sheathed copper

conductor unarmoured cable of 1.1 KV grade

11 MR confirming to IS : 7098:1988 with upto date

amendments of following sizes

11.1 MR 1 core, 50 Sq.mm.(UPS & Server Rack earthing) Mtr 25 25 0 3523 88075 MR

11.2 MR 1 core, 10 Sq.mm.(LV System earthing) Mtr 25 25 0 2680 67000 MR

Laying of one number additional PVC insulated and

PVC sheathed / XLPE power cable of 11 KV grade of

12 7.2 following size direct in ground including excavation, DSR-7.2

sand cushioning, protective covering and refilling the

trench etc as required.

Laying and fixing of following sizes of one number PVC

13 7.6 insulated and PVC sheathed/XLPE Power cable of 1.1kv DSR-7.8

grade on cable tray as required.

13.1 7.6.1 Upto 35 sq. mm (clamped with 1mm thick saddle) Mtr 310 5 315 45 47.8485 15072.278 0 DSR-7.8.1

Supplying and making end termination with brass

compression gland and aluminium lugs for following

14 9.1 size of PVC insulated and PVC sheathed / XLPE DSR-9.1

aluminium conductor cable of 1.1 KV grade as

Supplying and making end termination with brass

double compression gland and copper lugs for

15 MR following size of PVC insulated and PVC sheathed /

XLPE copper conductor cable of 1.1 KV grade as

Digitally signed by DEEPAK

2022) QTY. QTY. Total DSR Multiplying DSR MR MR

Description Unit (Court) (Quarters) Qty Rate factor 6.33% Amount Rate Amount Remarks

15.1 MR 1 core, 50 Sq.mm.(UPS Rack earthing) Sets 2 2 0 253 506 MR

15.2 MR 1 core, 10 Sq.mm.(LV System earthing) Sets 2 2 0 237 474 MR

TOTAL CARRIED TO SUMMARY 54026.273 1276020

C. HOT DEEP GI CABLE TRAYS & GI RACEWAYS

Supplying and installing following size of perforated

Hot Dipped Galvanised Iron cable tray (galvanisation

thickness not less than 50 microns) with perforation

16 4.6 not more than 17.5%, in convenient sections, joined DSR-4.6

with connectors, suspended from the ceiling with G.I.

suspenders including G.I. bolts & nuts, etc. as

16.2 4.6.4 300 mm width X 50 mm depth X 1.6 mm thickness Metre 50 50 963 1023.96 51197.90 0 DSR-4.6.4

16.3 4.6.6 450 mm width X 50 mm depth X 2.0 mm thickness Metre 25 25 1325 1408.87 35221.81 0 DSR-4.6.6

16.4 4.6.11 600 mm width X 50 mm depth X 2.0 mm thickness Metre 25 25 1909 2029.84 50745.99 0 DSR-4.6.11

TOTAL CARRIED TO SUMMARY 243750.89 0

Earthing with G.I. earth plate 600 mm X 600 mm X 6

mm thick including accessories, and providing

17 5.4 masonry enclosure with cover plate having locking Each 8 8 7472 7944.98 63559.82 0 DSR-5.4

arrangement and watering pipe of 2.7 metre long etc.

with charcoal/ coke and salt as required.

Earthing with copper earth plate 600 mm X 600 mm X

3 mm thick including accessories, and providing

18 5.6 masonry enclosure with cover plate having locking Nos 2 2 13838 14713.95 29427.89 0 DSR-5.6

arrangement and watering pipe of 2.7 metre long etc.

with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on

surface or in recess for connections etc. as required.

Digitally signed by DEEPAK

2022) QTY. QTY. Total DSR Multiplying DSR MR MR

Description Unit (Court) (Quarters) Qty Rate factor 6.33% Amount Rate Amount Remarks

Providing & fixing of 25mm x 5mm GI strip on surface

or recess for earth connection as required.

Providing and fixing 6 SWG dia G.I. wire on surface or

in recess for loop earthing as required.

TOTAL CARRIED TO SUMMARY 185069.49 0

E. INTERNAL WIRING:

Wiring for light point/ fan point/ exhaust fan point/

call bell point with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable in surface /

recessed steel conduit, with modular switch, modular

Wiring for light point/ fan point/ exhaust fan point/

call bell point with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable in surface /

23 1.1 recessed medium class PVC conduit, with modular

switch, modular plate, suitable GI box and earthing

the point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable etc. as required.

Wiring for group controlled (looped) light point/fan

point/exhaust fan point/ call bell point (without

independent switch etc.) with 1.5 sq. mm FRLS PVC

24 1.54 insulated copper conductor single core cable in

surface/ recessed steel conduit, and earthing the

point with 1.5 sq. mm FRLS PVC insulated copper

conductor single core cable etc. as required.

Digitally signed by DEEPAK

2022) QTY. QTY. Total DSR Multiplying DSR MR MR

Description Unit (Court) (Quarters) Qty Rate factor 6.33% Amount Rate Amount Remarks

Wiring for group controlled (looped) light point/fan

point/exhaust fan point/ call bell point (without

independent switch etc.) with 1.5 sq. mm FRLS PVC

25 1.55 insulated copper conductor single core cable in

surface/ recessed PVC conduit, and earthing the point

with 1.5 sq. mm FRLS PVC insulated copper conductor

single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC

insulated copper conductor single core cable in

26 1.5 surface/ recessed steel conduit alongwith 1 No. 4 sq. meter 1200 1200 433 460.41 552490.68 0 DSR-1.5

mm FRLS PVC insulated copper conductor single core

cable for loop earthing as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC

insulated copper conductor single core cable in

surface/ recessed medium class PVC conduit alongwith

27 1.12 1 No. 4 sq. mm FRLS PVC insulated copper conductor meter 550 550 334 355.14 195328.21 0 DSR-1.12

single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth

wire with the following sizes of FRLS PVC insulated

28 1.7 copper conductor, single core cable in surface/ DSR-1.7

recessed steel conduit as required.

Wiring for circuit/ submain wiring alongwith earth

wire with the following sizes of FRLS PVC insulated

29 1.14 copper conductor, single core cable in surface/ DSR-1.14

recessed PVC conduit as required.

Digitally signed by DEEPAK

2022) QTY. QTY. Total DSR Multiplying DSR MR MR

Description Unit (Court) (Quarters) Qty Rate factor 6.33% Amount Rate Amount Remarks

Supplying and fixing suitable size GI box with modular

plate and cover in front on surface or in recess,

30 1.31 including providing and fixing 3 pin 5/6 A modular Each 27 15 42 477 507.19 21302.15 0 DSR-1.31

socket outlet and 5/6 A modular switch, connections

etc. as required.

Supplying and fixing suitable size GI box with modular

plate and cover in front on surface or in recess,

including providng and fixing 2 Nos. 3 pin 5/6 A

31 1.56 modular socket outlet and 2 Nos. 5/ 6 A modular Each 3 4 7 676 718.79 5031.54 0 DSR-1.56

switch, connections etc. as required. (For light plugs to

be used in non residential buildings).

Supplying and fixing suitable size GI box with modular

plate and cover in front on surface or in recess,

32 MR including providng and fixing 3 Nos. 3 pin 5/6 A Each 18 2 20 808 16160 MR

modular socket outlet and 2 Nos. 5/ 6 A modular

switch, connections

Supplying and fixingetc. as required.

suitable size GI box with modular

plate and cover in front on surface or in recess,

33 1.32 including providing and fixing 6 pin 5/6 A & 15/16 A Each 46 19 65 586 623.09 40501.10 0 DSR-1.32

modular socket outlet and 15/16 A modular switch,

connections etc. as required.

Supplying and fixing two module stepped type

electronic fan regulator on the existing modular plate

34 1.25 switch box including connections but excluding Each 27 8 35 369 392.36 13732.52 0 DSR-1.25

modular plate etc. as required.

Supplying and fixing modular blanking plate on the

35 1.26 existing modular plate & switch box excluding Each 15 5 20 40 42.53 850.64 0 DSR-1.26

modular plate as required.

Digitally signed by DEEPAK

2022) QTY. QTY. Total DSR Multiplying DSR MR MR

Description Unit (Court) (Quarters) Qty Rate factor 6.33% Amount Rate Amount Remarks

Providing and fixing circular/hexagonal Fan box cast

iron /metal sheet Box for ceiling fan clamp of internal

dia 140mm , 73 mm height,Top id of 1.5mm thick MS

sheet with its Top surface hacked of proper bonding

36 Civil 10.18top lid shall be screwed into cast iron /metal sheet Each 27 8 35 185.2 196.92 6892.31 0 Civil DSR-10.18

Box by mean of 3.3mm dia round headed screw one

lock at the corners.clamp shall be made of 12mm dia

ms Bar band toshape as per standrd drawing.

Supplying and fixing 20 A, 240 V, SPN Industrial type

socket outlet, with 2 pole and earth, metal enclosed

plug top alongwith 20 A "C" curve, SP, MCB, in sheet

37 2.18 steel enclosure, on surface or in recess, with chained Each 6 6 12 1621 DSR-2.18

metal cover for the socket outlet and complete with

connections, testing and commissioning etc. as

TOTAL CARRIED TO SUMMARY 2457912.6 16160

F. LIGHTING FIXTURE AND FANS

Supply, Installation, testing and commissioning of

following type Fluorescent/ Compact fluorescent/LED

light fixtures on wall/ Ceiling including all fixing

accessories such as leads, etc complete as required.

The Fluorescent /CFL fixtures shall be complete with

38 Low loss copper ballast PF improvement capacitor,

Bipin Rotor type lamp holder, starter, starter base, all

pre wired upto the terminal block. All fixtures shall be

supplied with lamps.

Surface mounted 18W LED light with die cast

38.1 MR aluminium housing with inbuilt controller and robust Nos 88 88 0 2142 188496 MR

consction complete as required.

Digitally signed by DEEPAK

2022) QTY. QTY. Total DSR Multiplying DSR MR MR

Description Unit (Court) (Quarters) Qty Rate factor 6.33% Amount Rate Amount Remarks

Surface mounted 12W LED light with die cast

38.2 MR aluminium housing with inbuilt controller and robust Nos 108 9 117 0 1403 164151 MR

consction complete as required.

Supply of 9w LED Bulkhead with a nominal system

lumen output of 600 lumens and a minimum system

efficacy of 100 lm/W. The luminaire shall have a rated

system lifetime of 50,000 burning hours at L70. The

luminaire should have a color temperature of 6500K

39 MR and CRI > 70. The luminaire shall meet IP66 rating and Nos 5 5 0 1797 8985 MR

IK 09 rating with THD < 20% and PF > 0.9. The

luminaire housing should made of High pressure die

cast Aluminium with polycarbonate front diffuser. The

total power consumption should not exceed 6W

(including driver).

Digitally signed by DEEPAK

2022) QTY. QTY. Total DSR Multiplying DSR MR MR

Description Unit (Court) (Quarters) Qty Rate factor 6.33% Amount Rate Amount Remarks

Supply of 9W LED (mirror light) 2ft Batten with a

nominal system lumen output of 1150 lumens and a

minimum system efficacy of 115 lm/W. The luminaire

shall have a rated system lifetime of 25,000 burning

hours at L70. The luminaire should have a color

temperature of 6500K and CRI>80. The luminaire shall

meet IP20 rating with THD < 20% and PF > 0.9. The

luminaire housing should made of CRCA with a PC

glossy diffuser. The total power consumption should

not exceed 10W (including driver).

Surface or wall mounted 40W & 4000Lumens LED Tube

Rod with extruded aluminium housing with inbuilt

41 MR controller and robust consction complete as required. Nos 82 8 90 0 1697 152730 MR

Supply & fixing of 9W LED wall bracket light complete

within all respects.

Surface mounted 15W LED light with die cast

43 MR aluminium housing with inbuilt controller and robust Nos 33 33 0 1945 64185 MR

consction complete as required.

Surface mounted 9W LED light with die cast

44 MR aluminium housing with inbuilt controller and robust Nos 37 37 0 1304 48248 MR

consction complete as required.

Supply and fixing ceiling fans complete with blades,

down rods, electronic regulator and accessories, 230

45 MR V, 1200mm sweep. Min air delivery 210 CFM with Nos 27 8 35 0 4819 168665 MR

service value 6.00 BEE. Five star rated with brushless

direct current motor (BLDC)

Digitally signed by DEEPAK

2022) QTY. QTY. Total DSR Multiplying DSR MR MR

Description Unit (Court) (Quarters) Qty Rate factor 6.33% Amount Rate Amount Remarks

Supply and fix exhaust fan, steel body AC single Phase.

46 MR 230V of size 300m sweep with, blades, and frame and Nos 10 5 15 0 2635 39525 MR

TOTAL CARRIED TO SUMMARY 0 865491

H. UPS / INVERTER

Supply, installation, Testing and commissioning of the

47 a following rating Inverter as per Technical

Specifications and complete in all respects.

20 KVA UPS 3 phase (415 V + 15%) Volts input & 3

phase output (415 V + 1%), 50 Hz, Input harmonic

Current THD <=3% typical at 100% load, ,<=6%

maximum at 50% load with Isolation Transformer and

30 min Battery backup for each UPS along with battery

48 MR cabinet complete in all respect including supporting Set 1 1 0 659202 659202 MR

steel structure for UPS and Battery as required.UPS

shall have facility for parallel operation. It Should be

complete in all respect and as per direction of

Engineer in Charge.

TOTAL CARRIED TO SUMMARY 0 703149

Digitally signed by DEEPAK

2022) QTY. QTY. Total DSR Multiplying DSR MR MR

Description Unit (Court) (Quarters) Qty Rate factor 6.33% Amount Rate Amount Remarks

Supply,installation,testing and commissioning of

following minimum capacity High wall type indoor unit

equipped with washable synthetic media pre-filter,

fan section with low noise fan/dynamically balanced

blower,multispeed motor,coil section with DX Copper

coil ,electronic expansion valve ,outer cabinet,cordless

49 remote control, drain pan, necessory accessories MR

etc.,suitable for operation on single phase230V±10%,

50HzACsupply, complete, as required. . The cooling

capacity of indoor unit will be at air in let conditions

of 27Degree CDB and 19Degree CWB temperature.

TOTAL CARRIED TO SUMMARY 0.00 138735

Digitally signed by DEEPAK

COST OF EXTERNAL ELECTRICAL WORK

S. No. Description of item Schedule Item DSR - 2022 Non-Schedule Item

A POWER DISRIBUTION SYSTEM - 10,55,720.00

C EARTHING 4,19,018.88 0.00

D EXTERNAL LIGHTING 0.00 6,68,336.00

F TRANSFORMER 0.00 17,42,385.00

GRAND TOTAL 85,83,536.45

GRAND TOTAL 85,83,536.45

Digitally signed by DEEPAK

SCHEDULE OF QUANTITY

DSR Ref DSR Multiplying

Sl No No Description of Items Unit Qty Rate factor 6.33% DSR-Amount NSR Rate NSR-Amount Remarks

POWER DISRIBUTION SYSTEM

1 MR MAIN LT PANEL

Design, manufacture, supply inspection, instalation, handling,

assembling, affecting proper connections, testing and

commissioning of 14 SWG CRCA sheet steel fabricated cubical

type Main L.T. Panel, floor mounting, dust & vermin proof, front

operated construction, enclosure class - IP 52, powder coated

after proper treatment with 9 tank process with top/bottom

removable gland plates, as required, double compression type

cable glands, earth bus, hinged and lockable doors to achieve

dust and vermin proof complete with all inter connections small

wiring by min. 2.5 sq. mm. FRLS copper wires, ckt labels etc. The

Aluminium Bus Bar shall be of suitable length, 500 volts, 3 phase

50 Hz TPN, electrolytic aluminium as per IS 8623 . The panel

feeders shall be suitable for terminating suitable nos. 3.5 / 4 core

armoured aluminium cable or Aluminium Bus Duct as required.

All incoming / bus coupler MCCB shall be microprocessor based

with O/L & S/C and E/F protection and all Outgoings MCCB's may

be thermo-magnetic based O/L & S/C protection.

All MCCB's shall be Ics = 100% Icu, with rotary handle & pad

locking arrangement, with trip setting as per load requirement.

All TP MCCB shall be with heavy duty solid isolable neutral link.

The breaking capacity specified for breakers is Ics value (service

Digitally signed by DEEPAK

DSR Ref DSR Multiplying

Sl No No Description of Items Unit Qty Rate factor 6.33% DSR-Amount NSR Rate NSR-Amount Remarks

The instrument chamber shall be separate and shall comprise of

flush type ammeter, voltmeter, selector switches, cast resin type

CT's & PT's, etc. Separate CT's shall be provided for protective

and measuring system.

All Energy Analyser / TVM Shall have RS 485 Modbus RTU on

board Communication protocol for SCADA communication.

The fault withstanding capacity of panel & its control gear shall

be min. 25 KA rms for 1 sec.

GA drawings shall be got approved from Owners / Architects /

Consultants before fabrication.The panel has to be specifically

fabricated as per the space available at Stilt level.

Incomer from Transformer

1 nos 200 AMP FP MCCB of 35 KA & 1 nos. 200 AMP FP Contactor

The Contactor shall be electrically & Mechanically interlocked

with both incoming & Bus coupler's contactor in such a way that

at any one time two supply should not get mixed up.

Metering for incomers

1 nos. Under voltage relay with timer.

0-500 volt range voltmeter with selector switch (P.T. connected)

1 set of 3 CT's of ratio 800/5A, Class 1.0 accuracy 15 VA burden

1 set of 3 CT's of ratio 800/5A, Class 1.0 accuracy 15 VA burden

1 nos. Energy analyser (digital type) consisting of I, V, KW, KWH,

KVA, PF, HZ, MDI (EM 6400 of Conzerve or equi.) with RS 485

communication port for communication / report generation.

Power factor meter.

Digitally signed by DEEPAK

DSR Ref DSR Multiplying

Sl No No Description of Items Unit Qty Rate factor 6.33% DSR-Amount NSR Rate NSR-Amount Remarks

Frequency meter.

Indications for incomers

3 Nos. LED type phase indicating lamps, each lamp shall be with

bakup HRC fuse/MCB.

Incomer from DG set

1 nos 125 AMP FP MCCB of 35 KA & 1 nos. 125 AMP FP Contactor

The Contactor shall be electrically & Mechanically interlocked

with both incoming & Bus coupler's contactor in such a way that

at any one time two supply should not get mixed up.

Metering for incomers

0-500 volt range voltmeter with selector switch (P.T. connected)

1 set of 3 CT's of ratio 300/5A, Class 1.0 accuracy 15 VA burden

1 nos. Energy analyser (digital type) consisting of I, V, KW, KWH,

KVA, PF, HZ, MDI (EM 6400 of Conzerve or equi.) with RS 485

communication port for communication / report generation.

Power factor meter.

Frequency meter.

Indications for incomers

3 Nos. LED type phase indicating lamps, each lamp shall be with

bakup HRC fuse/MCB.

1 nos. 200 Amps FP MCCB Bus coupler (35 KA) & 1 no. 200 AMP

FP contactor (AC3).

The Contactor shall be electrically & Mechanically interlocked

with both incoming & Bus coupler's contactor in such a way that

at any one time two supply should not get mixed up.

Digitally signed by DEEPAK

DSR Ref DSR Multiplying

Sl No No Description of Items Unit Qty Rate factor 6.33% DSR-Amount NSR Rate NSR-Amount Remarks

3 Nos. LED type phase indicating lamps, 3 Nos. LED type

indicating lamps for indicating the status of feeder - ON / OFF /

TRIP. each lamp shall be with bakup HRC fuse/MCB.

1 section of 800 AMP & 1 section of 400 AMP, 415 Volts, 3 phase

50 HZ TPN high conductivity electrolytic Aluminium bus bar of

suitable length, SMC / DMC supports, with colour coading and

insulated by heat shrinkable sleeves and clip on shrouds for

The current density of bus bar up to 1000 Amp shall be minimum

1.00 sq mm / amp.

The Maximum allowable temperature for the Bus bar to be

restricted to 85 deg C. The temperature rise should be restricted

to 35 deg C above design ambient temperature of 50 deg C.

All outgoing feeders shall be provided with one set of phase

indication lamps and trip indication lamps with protection

fuses/MCB and ammeter with selector switch with suitable ratio

CT's of accuracy class 1.0

2 No. 125amps 4P MCCB 25kA outgoing feeder .

4 No. 100amps 4P MCCB 25kA outgoing feeder .

2 No. 160amps 4P MCCB 25kA outgoing feeder .

1.1 2 No. 63amps 4P MCCB 25kA outgoing feeder . Set 1 7,78,223 7,78,223

2 MR CAPACITOR PANEL

Digitally signed by DEEPAK

DSR Ref DSR Multiplying

Sl No No Description of Items Unit Qty Rate factor 6.33% DSR-Amount NSR Rate NSR-Amount Remarks

Design, manufacture, supply, inspection, handling, assembling,

affecting proper connections, testing and commissioning of 14

SWG CRCA sheet steel fabricated cubical type 100 KVAR A P F C

Panel consisting of 5 / 10 / 15 / 20 / 25 / 50 KVAR capacitor units

in tier formation, housed in an integrated cubicle type automatic

switching ON and OFF control panel, floor mounting, dust &

vermin proof, front operated construction, enclosure class - IP 52,

powder coated after proper treatment with 9 tank process with

top/bottom removable gland plates, as required, double

compression type cable glands, earth bus, hinged and lockable

doors to achieve dust and vermin proof complete with all inter

connections small wiring by min. 2.5 sq. mm. copper wires, ckt

labels etc. The Aluminium Bus Bar shall be of suitable length, 500

volts, 3 phase 50 Hz TPN, electrolytic aluminium as per IS 8623 .

The incoming MCCB shall be microprocessor based with inbuilt

O/L & S/C release with E/F protection and All outgoings MCCB's

shall be thermal-magnetic based with inbuilt O/L & S/C release.

All MCCB's shall be Ics = 100% Icu, with rotary handle & pad

locking arrangement, with adjustable O/L & S/C trip setting as

per load requirement. All TP MCCB's shall be with AC 3 duty

contactor for neutral isolation. All TP MCCB shall be with heavy

duty solid isolable neutral link. The breaking capacity specified is

Ics value. The instrument chamber shall be separate and shall

comprise of flush type ammeter, voltmeter, selector switches,

CT's, PT's, etc

Capacitor duty contactors should be used for switching individual

capacitor banks.

Digitally signed by DEEPAK

DSR Ref DSR Multiplying

Sl No No Description of Items Unit Qty Rate factor 6.33% DSR-Amount NSR Rate NSR-Amount Remarks

The fault withstanding capacity of panel & its control gear shall

be min. 35 KA rms for 1 sec.

Each section of capacitor panel shall have Verticle hood &

exhaust fans for ventilation purpose.

The maximum height of the panel should not exceed 2100 mm

unless specifically approved.

The capacitor panel shall be integrated with the main L T Panel

as per schematic diagram.

1 no. 100 AMP. Three Pole, MCCB with heavy duty solid neutral

link, with O/C , S/C, E/F protection, adjustable thermal magnetic

release, 35 KA Breaking Capaciy.

1 set- 3 CTs , ratio 100/5A Class 1.0 accuracy 15 VA burden for

1Nos- (0-100A) digital Ameter with selector switch

Micro processor based automatic power factor control relay (3

phase) (including power factor meter) in 16 steps for automatic

cut off or add on capacitor units to keep the power factor at 0.95

with variation of loads. All associated auxiliary contactors /

relays shall be provided with in the scope of work.

Phase indicating lamps with HRC fuses, and indicating in each

capacitor chamber unit to indicate On/Off status of capacitor

160 AMP, 500 Volts, 3 phase 50 HZ TPN high conductivity

electrolytic Aluminium bus bar of suitable length, SMC / DMC

supports, with colour coding and insulated by heat shrinkable

sleeves and clips on shrouds for joints. The current density of bus

bar shall be minimum 1.00 sq mm / amp.

Digitally signed by DEEPAK

DSR Ref DSR Multiplying

Sl No No Description of Items Unit Qty Rate factor 6.33% DSR-Amount NSR Rate NSR-Amount Remarks

The Maximum allowable temperature for the Bus bar to be

restricted to 85 deg C. The temperature rise should be restricted

to 35 deg C above ambient temperature.

1 no. of 63 AMPS TPN 35 KA MCCB and 80 amps AC3 duty

contactor with 25 KVAR gas filled 415 V capacitor bank, auto-

manual selector switch, start stop push button for manual

operation including on/off indicating lamps and delay timer

1 no. of 40 AMPS TPN 35 KA MCCB and 50 amps AC3 duty

contactor with 15 KVAR gas filled 415 V capacitor bank, auto-

manual selector switch, start stop push button for manual

operation including on/off indicating lamps and delay timer

1 no. of 32 AMPS TPN 35 KA MCCB and 40 amps AC3 duty

contactor with 10 KVAR gas filled 415 V capacitor bank, auto-

manual selector switch, start stop push button for manual

operation including on/off indicating lamps and delay timer

1 no. of 16 AMPS TPN 35 KA MCCB and 20 amps AC3 duty

contactor with 5 KVAR gas filled 415 V capacitor bank, auto-

2.1 manual selector switch, start stop push button for manual

operation including on/off indicating lamps and delay timer

3 MR EXTERNAL LIGHTING FEEDER PILLAR

Digitally signed by DEEPAK

DSR Ref DSR Multiplying

Sl No No Description of Items Unit Qty Rate factor 6.33% DSR-Amount NSR Rate NSR-Amount Remarks

Design, manufacture, supplying fixing in position of outdoor type

feeder pillar, metal clade, suitable for 415 volt, 3-phase, 50 Hz

with suitable foundation and arrangement for incoming/

outgoing cable termination, earthing, locking arrangement,

insulated aluminium bus bars system, interconnection etc.

63 amps TP+N MCCB with 63 Amps TP contactor 0-24 hours timer

auto / manual by pass selector switches& following accessories:

Metering & Indication

1 set of R,Y,B phase indicating lamps each with 3 nos. 6A SP

Phase indicating light shall be protected by 6A MCB. - 1 Set

1 Set of 150A TPN Aluminium Bus Bar with colour coded PVC

25A FP MCB -4 No.

3.1 EXTERNAL LIGHTING FEEDER PILLAR _ described as above Set 1 68,497 68,497

TOTAL CARRIED TO SUMMARY - 10,55,720.00

B HT & LT CABLES

Supply, installation, testing and commissioning of the following

HT & LT cables or approved equivalent:

11 KV Grade HT Cable

Digitally signed by DEEPAK

DSR Ref DSR Multiplying

Sl No No Description of Items Unit Qty Rate factor 6.33% DSR-Amount NSR Rate NSR-Amount Remarks

Supply of following sizes of XLPE insulated PVC sheathed

aluminium conductor armoured power cable of 11kV grade H.T.

Cable shall be of earthed grade and shall be of stranded

construction, comply to IS 8130., and with electrolytic grade

4 MR purity aluminium conductor, shall be manufactured & tested in

accordance with IS : 7098 (Part II). Outer sheath shall be of tough,

PVC compound as per IS: 5831 and shall be extruded over the

armouring. etc.complete as per technical specifications.

LAYING OF HT CABLES

5 Laying of 11 kV Grade HT Cables

Laying of one number XLPE power cable of 11 KV grade of

5.1 8.1 following size in in Ground, Surface and Cable Trays and Load in

Hume Pipe/Duct. etc.complete as per technical specifications.

11 kV HT CABLE END TERMINATION

Supplying and making outdoor cable end jointing with cast resin

compound, including lugs and other jointing materials, for

6 10.2 following size of 3 core, XLPE aluminium conductor cable of 11 KV

grade as required :

Supply of XLPE insulated, armoured heavy duty electric cable

7 MR with aluminium conductor, 1100 volts grade, cross-sectional area

Digitally signed by DEEPAK

DSR Ref DSR Multiplying

Sl No No Description of Items Unit Qty Rate factor 6.33% DSR-Amount NSR Rate NSR-Amount Remarks

7.8 MR 4 core, 6 Sq.mm. Cu. Cable Mtr 125 5,173 6,46,680

Laying of one number additional PVC insulated and PVC

sheathed / XLPE power cable of 11 KV grade of following size

8 7.2 direct in ground including excavation, sand cushioning,

protective covering and refilling the trench etc as required.

Supplying and making end termination with brass compression

gland and aluminium lugs for following size of PVC insulated and

9 9.1 PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade

Digitally signed by DEEPAK

DSR Ref DSR Multiplying

Sl No No Description of Items Unit Qty Rate factor 6.33% DSR-Amount NSR Rate NSR-Amount Remarks

Providing,fixing and laying of following dia hume Pipe NP2

class(light duty) in ground with RCC collars,jointing with cement

10 14.14 mortor 1:2 (1cement+2fine sand) including trenching 75cm deep

and re-filling as required.

TOTAL CARRIED TO SUMMARY 210152.739 1928825

Supply, installation, testing and commissioning of the following

Earting pits and strips or approved equivalent:

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including

accessories, and providing masonry enclosure with cover plate

11 5.2 having locking arrangement and watering pipe etc. with charcoal/

coke and salt as required. Each 4 6855 7288.9215 29155.686

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick

including accessories, and providing masonry enclosure with

12 5.4 cover plate having locking arrangement and watering pipe of 2.7

metre long etc. with charcoal/ coke and salt as required. Nos 16 7472 7944.9776 127119.6416

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick

including accessories, and providing masonry enclosure with

13 5.6 cover plate having locking arrangement and watering pipe of 2.7

metre long etc. with charcoal/ coke and salt as required.

Providing & fixing of 25mm x 5mm GI strip on surface or recess

for earth connection as required. Meter 400 244 259.4452 103778.08

Providing and fixing 25 mm X 5 mm copper strip on surface or in

recess for connections etc. as required. Meter 75 1162 1235.5546 92666.595

Digitally signed by DEEPAK

DSR Ref DSR Multiplying

Sl No No Description of Items Unit Qty Rate factor 6.33% DSR-Amount NSR Rate NSR-Amount Remarks

Providing and fixing 6 SWG dia G.I. wire on surface or in recess

for loop earthing as required. Meter 100 70 74.431 7443.1

TOTAL CARRIED TO SUMMARY 4,19,018.88 0.00

D EXTERNAL LIGHTING

Supply, installation, testing and commissioning of the following

lighting fixtures & poles or approved equivalent:

Outdoor street light fixture with 45W LED complete with all

accessories as required. No. 14 8,206 1,14,884

Supply Installation Testing Commissioning of GI 6.0 mtr

octagonal Pole with 1200mm single Arm with inbuilt weather

proof junction box including CC foundation (1:2:4 cement

concrete (1 cement : 2 coarse sand : 4 graded stone aggregate

40mm nominal size) including excavation & refilling etc minimum

18 MR size 350mm x350mmx500mm with 300mm x 300mm x10 mm

Base plate including 4 Nos. heavy duty foundation nut bolts with

suitable length as required and complete in all respect as per

direction of Engineer in Charge as complete required

Supply, Installation, Testing and Commissioning of (4W-9W)

Bollard lighting fixture with IP54 LED Fixture Nos 2 9,734 19,468

Digitally signed by DEEPAK

DSR Ref DSR Multiplying

Sl No No Description of Items Unit Qty Rate factor 6.33% DSR-Amount NSR Rate NSR-Amount Remarks

Supply, Installation, Testing and Commissioning of LED Post Top

with a system lumen output of 2300 lumens and a minimum

system efficacy of >85 lm/W. The luminaire shall have a rated

system lifetime of 25,000 burning hours at L70. The luminaire

20 MR should have a color temperature of 3000K and CRI > 70. The

luminaire shall meet IP65 with THD < 20% and PF > 0.9. The

luminaire shall have closed diffused optics with polycarbonate

diffuser board. The total power consumption should not exceed

27W (including driver).

Supply Installation Testing Commissioning of GI 4.0 mtr

octagonal Pole with inbuilt weather proof junction box including

CC foundation (1:2:4 cement concrete (1 cement : 2 coarse sand :

4 graded stone aggregate 40mm nominal size) including

21 MR excavation & refilling etc minimum size 350mm x350mmx500mm

with 300mm x 300mm x10 mm Base plate including 4 Nos. heavy

duty foundation nut bolts with suitable length as required and

complete in all respect as per direction of Engineer in Charge as

complete required

Supply, installation, testing and commissionin of following

22 MR polycarbonate weather proof (IP-55) junction boxes including

terminal / connector block complete as required.

Digitally signed by DEEPAK

DSR Ref DSR Multiplying

Sl No No Description of Items Unit Qty Rate factor 6.33% DSR-Amount NSR Rate NSR-Amount Remarks

TOTAL CARRIED TO SUMMARY 0.00 6,68,336.00

23 MR 11 KV HT PANEL

Supply, Installation, Testing and Commissioning of indoor type floor mounted

metal clad, 2mm thick, 11KV VCB panel with 1No. 11 kV, 630A 350MVA VCB

+ 2No. 11 kV, 630A 350MVA VCB Panel with totally enclosed & electrically

interlocked, horizontal drawout, horizontal isolation type breaker as per IS

13118, as per specifications, having capacities as mentioned below, single

break, trip free mechanism, manually charged and auto/manually closing

breaker suitable for use on 11kV, 3Phase, 50Hz A.C. supply with short circuit

fault level of 350 MVA, complete with self contained electrically interlocked

rack in and rack out mechanism, air insulated & encapsulated copper bus

bars of 800Amp capacity, breaker featured with mechanical ON/ OFF

indicator with hand trip device, spring release coil, shunt trip coil and

auxiliary switch of 4NO + 4NC , PT 11kv/110volts , IDMT Relay and equipped

with following switchgears and accessories i/c connections and Outgoing

shall be suitable for 3Cx 240*sq.mm XLPE 11kV cable (cable entry from

bottom/top/side) end termination with heat shrinkable jointing material,

Strip heater with thermostat to prevent absorption of moisture etc. as

INCOMER - Consisting of followings

1 No. 630 Amp. 350 MVA VCB with earth switch.

1 No. 630 Amp. - 11kv/110 volts PT class 0.5 accuracy and 100va

burden with 1 no. voltmeter (0-15kv), digital type, selector switch

for voltmeter & protection fuses/MCB for HT metering up to 12kv

1 NO.- Digital flush type class- 0.5 or better accuracy

multifunction meter showing voltage, ampere, KWH and power

factor, frequency etc. with MDI

Digitally signed by DEEPAK

DSR Ref DSR Multiplying

Sl No No Description of Items Unit Qty Rate factor 6.33% DSR-Amount NSR Rate NSR-Amount Remarks

1 No. Microprocessor based numerical relay with O/L, E/F and

highset S/C protection compatible.

1 No. - Set of Dual core dual ratio 3 CTs 300/150/5/5A of 15VA

burden and accuracy Class -0.5 for metering and class 5P10 for

Manual push buttons for VCB off, VCB on, & for trip alarm

cancellation. Shunt trip coil, 1 set of three phase R,Y,B indicating

lamps along with 2A SP MCB back up protection, control

terminals & wiring, One number tripple pole IDMT non-

directional relay, two poles arranged for over current protection

and one pole for earth fault protection. One set inbuilt DC power

pack. Cable end box, trip super vision relay, master trip relay,

digital display power factor meter AC 3 phase, 1 set of solid stat

audio and visual annucinator with test/accept/reset- push

button ane electronic hooter, strip heater with thermostat to

prevent absorption of moisture.

OUTGOING - 2No. Consisting of followings

630 Amp. 350 MVA VCB with earth switch.

2 nos- (0-100A) ammeters, dual scale digital type & selector

switches for ammeters.

2 nos- Microprocessor based numerical relay with O/L, E/F and

highset S/C protection compatible .

2 nos- Set of Dual core dual ratio 3 CTs 100/5/5A of 15VA burden

and accuracy Class -1.0 for metering and class 5P10 for

Digitally signed by DEEPAK

DSR Ref DSR Multiplying

Sl No No Description of Items Unit Qty Rate factor 6.33% DSR-Amount NSR Rate NSR-Amount Remarks

Power pack with 220 volt AC input & 24 volt DC continious

output suitable for closing/tripping/indication of HT panel board

with 2 nos. of 12 volts each maintenance free batteries of

100(suitable) AH each, charging unit, capacitor bank for

emergency delievring for trip system complete with suitable

capacity of ammeter & voltmeter i/c connections with 2.5 sqmm.

FRLS insulated copper conductor cable etc. as required.

Suitable space for termination of 1 No. 3 C x 240 sq.mm XLPE

TOTAL CARRIED TO SUMMARY 0 14,39,907

Supply, installation, testing and commissioning of 125KVA ,3

phase, 11/ 0.433 KV oil filled Transformer copper wound with

Dyn -II connection and neutral brought out for earthing. The

transformer shall be provided with (–) 5% and (+) 15% ON load

tap changer on HT side including RTCC Panel as per IS:1180 PART-

2-Level-2 or ECBC+BUILDING-2017 . HT side cable termination box

shall be suitable for 11 KV, 3 C x 240 mm2 XLPE cable and LT side

terminal box shall be suitable for terminating of 3.5 core 240

24 MR AMP Al XLPE Cable. The transformer shall be supplied with all

standard fitting viz dial type winding and oil temperature

indicator, buchholz relay with trip and alarm contacts,

thermistors for Alarm and Trip, winding temperature relay unit

with Alarm and trip, lifting lugs, earthing studs, drain oil point de-

hydration oil outlet & inlet, oil conservator and marshlling box,

etc. complete in all respect as required as per specification.

TOTAL CARRIED TO SUMMARY 0 17,42,385

Digitally signed by DEEPAK

DSR Ref DSR Multiplying

Sl No No Description of Items Unit Qty Rate factor 6.33% DSR-Amount NSR Rate NSR-Amount Remarks

PROVIDING, INSTALLING, TESTING AND COMMISSIONING OF

'SILENT TYPE' DIESEL GENERATING SET

Digitally signed by DEEPAK

DSR Ref DSR Multiplying

Sl No No Description of Items Unit Qty Rate factor 6.33% DSR-Amount NSR Rate NSR-Amount Remarks

Supply, installation, testing and commissioning of 62.5 KVA prime

continuous (actual) rating radiator cooled type diesel generating

set (alternature at 47 deg C temperature) with Acoustic Enclosure

along with electronic governor with AMF Panel with 125 A 4Pole

MCCB Isolator 35kA, base frame, Alternator (capable of

delivering true 125 kVA output), Static Excitation System, Lube Oil

25 MR System, Batteries, Battery charger, Instrumentation, 150 liter day

oil fuel tanks, Silencer with bellows, alarms, Engine Control

Panel, AVM pads, AVR Panel,Terminal arrangements in

termination box suitable to 3.5cx120 sqmm aluminium cables

with all other associated equipment / work as per specifications.

B. EXHAUST PIPE

Supply, installation, testing and commissioning of exhaust pipe

'B' class heavy duty MS pipe with all fixing accessories and

26 MR hardwares. The exhaust pipes shall be insulated with 75 mm

thick mineral wool insulation wrapped in chicken mesh and clad

with 24 gauge aluminium sheet including all support.

Digitally signed by DEEPAK

DSR Ref DSR Multiplying

Sl No No Description of Items Unit Qty Rate factor 6.33% DSR-Amount NSR Rate NSR-Amount Remarks

Supply, installation, testing and commissioning of MS supported

self standing structure for DG exhaust pipe 'B' class heavy duty

MS pipe with all fixing accessories and hardwares. The exhaust

pipes shall be insulated with 75 mm thick mineral wool

insulation wrapped in chicken mesh and clad with 24 gauge

27 MR aluminium sheet including all support, lighting arrester, avaition

light as required complete in all respect. the structure shall be

painted with two coat of primer and two coat of aluminium , GI

paints as good as required.(the Cost of pipe is including in item

TOTAL CARRIED TO SUMMARY 0 11,19,192

Digitally signed by DEEPAK

Sub Head Description of item DSR 2022 Market Rate

A CCTV (IP VIDEO SURVEILLANCE) SYSTEM 1,04,629 1,50,640

B DATA , VOICE & Wi-Fi SYSTEMS 3,72,438 37,694

C MATV SYSTEMS 43,742.04 0.00

TOTAL COST FOR DSR + MR 7,09,143

Digitally signed by DEEPAK

SCHEDULE OF QUANTITY

DSR QTY. QTY. Total DSR with DSR MR

Sl No Description Unit MR Rate REMARKS

Ref No (Court) (Quarters) Qty Rate Multiplying Amount Amount

A CCTV (IP VIDEO SURVEILLANCE) SYSTEM

1 MR Supply, installation, testing and commissioning

of 3 MP Dome camera , ONVIF profile S , G&

T ,UL , CE , FCC Certified ,1/2.8”

Progressive Scan CMOS ,2.7 mm to 12 mm

motorized varifocal lens , Quad stream with

each stream support H.265+ compression

simultaneously ,min illumination : 0.01 Lux @

(F1.2,AGC ON), 0 Lux with IR , Shutter speed

Compression : H.265+ ,H.265 ,H.264+ H.264

.SD card support upto 128GB , Alarm trigger -

1 input / 1 output , frame rate : Main stream

should support 25 fps@5MP ,Edge analytics :

line crossing , perimeter intrusion ,Face

detection(deep learning) , pedestrian detection

,cross counting , stationary object , In built IR

LED , IR Distance upto 40 meters , IP 67 ,

Digitally signed by DEEPAK

DSR QTY. QTY. Total DSR with DSR MR

Sl No Description Unit MR Rate REMARKS

Ref No (Court) (Quarters) Qty Rate Multiplying Amount Amount

2 MR Supply, installation, testing and

commissioning of 16 channel NVR ,

ONVIF compliant , recording bandwidth

640 Mbps , output interface 1 HDMI (up

to 4K), 1 VGA , Alarm in/out :16ch in /

4ch out , 1 X RJ45 ethernet , iOS

smartphone support , 8 HDD support ,

each HDD slot support upto 8 TB HDD ,

RAID support , 1x3.0 USB for backup

/upgrade , 2x 2.0 USB for mouse .Edge

analytics of poposed cameras must be

integrated with NVR . Artificial

Intelligence Support having face

recognition with compatible deep

learning supported cameras, AI-Face

registered quantity upto 10,000 ,A.I

maximum captured quantity 200,000. .

UL,CE,FCC certified. Nos. 1 1 0 47409.00 47409 MR

3 MR Supply, Installation, Testing &

Commissioning of 8TB Surviellance Hard

4 MR Supply, Installation, Testing &

Commissioning of CAT 6 UTP, LSZH

Patch Cord as per ANSI/TIA/EIA 568C.2

and UL 94-V-0, ROHS Compliant, patch

cord 2 Mtr for rack side switch to jack

panel connectivity. Nos. 10 10 0 200 2000 MR

Digitally signed by DEEPAK

DSR QTY. QTY. Total DSR with DSR MR

Sl No Description Unit MR Rate REMARKS

Ref No (Court) (Quarters) Qty Rate Multiplying Amount Amount

5 MR Supply, Installation, Testing &

Commissioning of CAT 6 UTP, LSZH

Patch Cord as per ANSI/TIA/EIA 568C.2

and UL 94-V-0, ROHS Compliant, patch

cord 1 Mtr for rack side switch to jack

panel connectivity. Nos. 10 10 0 180 1800 MR

6 MR Supply, Installation, Testing &

Commissioning of CAT 6 UTP Universal

(both tool & toolless) information outlet

(I/O) in accordance with ANSI TIA 568

C.2, IEC 60603-7-4 2nd Edition, ISO/IEC

TR 11801-9901-2014, ROHS Compliant.

The I/O should have minimu 750 mating

cycle and 200 insertion cycle and UL

approved,for Data, Voice, & Wi-Fi at

7 MR Supply, Installation, Testing &

Commissioning of 1, 2 and 4 port face

plate, British Style with Shutter, 2 Plate

system clear finish with transparent

labelling, ABS-UL94-V2, ROHS

Compliant, in accorandce with

standards like ANSI/TIA-568-C.2, ISO/IEC

2009 & ISO/IEC 60603-7 white for I/O

fixing at user side.

Digitally signed by DEEPAK

DSR QTY. QTY. Total DSR with DSR MR

Sl No Description Unit MR Rate REMARKS

Ref No (Court) (Quarters) Qty Rate Multiplying Amount Amount

8 1.18 Supplying and drawing following pair

0.5 mm dia FRLS PVC insulated

copper conductor, unarmored

telephone cable in the existing surface/

recessed steel/ PVC conduit as

required. DSR-1.18

9 1.20 Supplying and fixing of following sizes of

steel conduit along with accessories in

surface/recess including painting in

case of surface conduit, or cutting the

wall and making good the same in

case of recessed conduit as required.

TOTAL CARRIED TO SUMMERY 1,04,629 1,50,640

B DATA , VOICE & Wi-Fi SYSTEMS

Digitally signed by DEEPAK

DSR QTY. QTY. Total DSR with DSR MR

Sl No Description Unit MR Rate REMARKS

Ref No (Court) (Quarters) Qty Rate Multiplying Amount Amount

10 MR Supply, Installation, Testing &

Commissioning of of Access Switch 24

Port POE+ Access Switches with

switching capacity of 128 Gbps,

forwarding performance 95 Mpps,

having 24 x 10/100/1000BASE-T PoE-

plus(RJ45) with minimum PoE budget of

370W and 4 x 10G SFP+ uplink ports,

should have support for 9 switch

Stacking with bandwidth of minimum

120 Gbps. Should support min 2GB

internal DRAM, 2GB internal Flash

memory, 32K MAC address, 4k Multicast

Routes, Should have static Routing

from day 1 and upgradable to support

OSPF and VRRP with 1 year support.

11 MR Supply, Installation, Testing &

Commissioning of fiber Modules

12 MR Supply, Installation, Testing &

Commissioning of fiber Modules 10BASE

13 1.24 Supplying and fixing following modular

switch/ socket on the existing modular

plate & switch box including

connections but excluding modular

plate etc. as required. DSR-1.24

13.1 1.24.6 Telephone socket outlet Each 20 4 24 148 157 3776.84 0 DSR-1.24.6

Digitally signed by DEEPAK

DSR QTY. QTY. Total DSR with DSR MR

Sl No Description Unit MR Rate REMARKS

Ref No (Court) (Quarters) Qty Rate Multiplying Amount Amount

14 MR DATA/Wi-Fi socket outlet Each 18 2 20 0 398 7960 MR

15 1.27 Supplying and fixing following size/

modules, GI box alongwith modular

base & cover plate for modular

switches in recess etc. as required. DSR-1.27

16 1.28 Supplying and fixing following Modular

base & cover plate on existing modular

metal boxes etc. as required.

17 MR Supply, Installation, Testing &

Commissioning of 12 port ONT as

required, complete with in all respects.

18 MR Supply, Installation, Testing &

Commissioning of 15U wall mount rack

with fans , 2 cable managers ,

satationary shelf , 2 Nos. of hardware

pkts. Nos. 2 2 0 0 MR

19 1.18 Supplying and drawing of UTP 4 pair

CAT 6 LAN Cable as per EIA in the

existing surface/ recessed Steel/PVC

Conduit as required. DSR-1.18

Digitally signed by DEEPAK

DSR QTY. QTY. Total DSR with DSR MR

Sl No Description Unit MR Rate REMARKS

Ref No (Court) (Quarters) Qty Rate Multiplying Amount Amount

20 1.2 Supplying and fixing of following sizes of

steel conduit along with accessories in

surface/recess including painting in

case of surface conduit, or cutting the

wall and making good the same in

case of recessed conduit as required.

21 1.21 Supplying and fixing of following sizes of

PVC conduit along with accessories in

surface/recess including painting in

case of surface conduit, or cutting the

wall and making good the same in

case of recessed conduit as required.

22 MR Providing and fixing of self illuminated /

auto glow "EXIT" signs printed on

photoluminescent sheet containing self

illuminated base chemical, of

appropriate size not less than 400 x 150

from ceiling or fixed to the walls with

accessories as required and as directed

at site etc. complete as required.

TOTAL CARRIED TO SUMMERY 3,72,438 37,694

Digitally signed by DEEPAK

DSR QTY. QTY. Total DSR with DSR MR

Sl No Description Unit MR Rate REMARKS

Ref No (Court) (Quarters) Qty Rate Multiplying Amount Amount

C MATV SYSTEMS

23 1.19 Supplying and drawing co-axial TV

cable RG-6 grade, 0.7 mm solid copper

conductor PE insulated, shielded with

fine tinned copper braid and protected

with PVC sheath in the existing surface/

recessed steel/ PVC conduit as

24 1.2 Supplying and fixing of following sizes of

steel conduit along with accessories in

surface/recess including painting in

case of surface conduit, or cutting the

wall and making good the same in

case of recessed conduit as required.

25 1.21 Supplying and fixing of following sizes of

PVC conduit along with accessories in

surface/recess including painting in

case of surface conduit, or cutting the

wall and making good the same in

case of recessed conduit as required.

Digitally signed by DEEPAK

DSR QTY. QTY. Total DSR with DSR MR

Sl No Description Unit MR Rate REMARKS

Ref No (Court) (Quarters) Qty Rate Multiplying Amount Amount

26 1.24 Supplying and fixing following modular

switch/ socket on the existing modular

plate & switch box including

connections but excluding modular

plate etc. as required. DSR-1.24

26.1 1.24.7 TV antenna socket outlet Each 3 4 7 148 157 1101.58 0 DSR-1.24.7

27 1.27 Supplying and fixing following size/

modules, GI box alongwith modular

base & cover plate for modular

switches in recess etc. as required. DSR-1.27

28 1.28 Supplying and fixing following Modular

base & cover plate on existing modular

metal boxes etc. as required.

TOTAL CARRIED TO SUMMERY 43,742.04 0.00

Digitally signed by DEEPAK

DSR Code g factor NDSR DSR NDSR

Sno Reff Item Unit DSR Rate 6.33% Rate Qty Amount Amount

PART-B PLUMBING WORKS

A. SANITARY FIXTURES & FITTINGS

Providing and fixing white vitreous china

extended wall mounting water closet of

size 780x370x690 mm of approved shape

including providing & fixing white vitreous

china cistern with dual flush fitting, of

flushing capacity 3 litre/ 6 litre (adjustable

to 4 litre/ 8 litres), including seat cover,

and cistern fittings, nuts, bolts and gasket

Providing and fixing of vitreous China

Sanitary fixtures and CP fitting and other

accessories for Handicapped toilet . Each

Matrix Set shall comprised (Wash Basin 65

x 35 with one pair mounting brackets,

EWC & Cistern complete with fittings &

seat cover, one no hinged rail 76 cm and

five no's of grab rails 60 cm). complete all

Digitally signed by DEEPAK

DSR Code g factor NDSR DSR NDSR

Sno Reff Item Unit DSR Rate 6.33% Rate Qty Amount Amount

Providing and fixing Under counter with

white glazed vitreous china wash basins

with C.P. brass eurometic self closing pillar

tap with flow rate of 3.8 LPM complying to

Green Building, C.P. brass waste and

unions and sealing of joints between wash

basins and counter slabs around the wash

basins with Silicone rubber cement of

approved make of matching colour all

complete including cutting and making

good the walls and floors where required.

Providing and fixing white vitreous china

battery based infrared sensor operated

urinal of approx. size 610 x 390 x 370 mm

having pre & post flushing with water

(250 ml & 500 ml consumption), having

water inlet from back side, including fixing

to wall with suitable brackets all as per

manufacturers specification and direction

of Engineer-in-charge.

Digitally signed by DEEPAK

DSR Code g factor NDSR DSR NDSR

Sno Reff Item Unit DSR Rate 6.33% Rate Qty Amount Amount

Providing and fixing Urinal Division Plate

with table rubbed, edges rounded and

polished, of size 900 x 450 mm, fixed in

urinal partitions by cutting a chase of

appropriate width with chase cutter and

embedding the stone in the chase with

epoxy grout or with cement concrete 1:2:4

(1 cement : 2 coarse sand : 4 graded stone

aggregate 6 mm nominal size) as per

direction of Engineer-in-charge and

finished smooth.

Providing and fixing Stainless Steel A ISI

304 (18/8) kitchen sink as per IS:13983

with C.I. brackets and stainless steel plug

40 mm, including painting of fittings and

brackets, cutting and making good the

walls wherever required :

17.10.1 Kitchen sink with drain board

Providing & fixing in position C.P brass

Sink mixer swivel spout (Wall mounted) of

approved make (to the approval of

Engineer-in-charge) complete in all

Digitally signed by DEEPAK

DSR Code g factor NDSR DSR NDSR

Sno Reff Item Unit DSR Rate 6.33% Rate Qty Amount Amount

Providing and fixing of Health faucet with

regulator with flexible pipe 1.0 m long,

wall hooked complete as required with

flow rate of 3.8 LPM complying to Green

Building requirements.

Providing and fixing of 15 mm dia CP

brass 2way bib cock with CP wall flange of

approved quality with flow rate of 3.8 LPM

complying to Green Building

10 NS Providing and fixing toilet paper holder.

Providing and fixing of C.P. brass twin coat

hook with PVC rawl plug & C.P. brass

11 NS screw complete as required. Each 538.00 24 12912.0

Providing and fixing C.P. brass angle valve

for basin mixer and geyser points of

approved quality conforming to IS:8931.

15 mm nominal bore Each 564.00 114 64296.0

Digitally signed by DEEPAK

DSR Code g factor NDSR DSR NDSR

Sno Reff Item Unit DSR Rate 6.33% Rate Qty Amount Amount

Providing and fixing 450mm Long

Braided Hose with Two 15mm Nuts &

Rubber Washers Without Nipple (Suitable

13 NS for Geysers)

15 mm nominal bore

45 cm length Each 293.00 50 14650.0

Providing and fixing of CP Brass Bath and

Shower Mixer with provision of overhead

shower with 115mm long bend pipe, in

built spout, spout / shower selector with

wall flange complete with all accessories as

required and making good the walls

wherever required. with flow rate of 6.0

LPM complying to Green Building

Providing and fixing of CP Brass 115mm

long Shower Arm with wall flange and

pressure adjustable Shower Rose complete

with all accessories as required and

making good the walls wherever required

with flow rate of 6.0 LPM complying to

Green Building requirements.

Digitally signed by DEEPAK

DSR Code g factor NDSR DSR NDSR

Sno Reff Item Unit DSR Rate 6.33% Rate Qty Amount Amount

Providing & fixing of ABS plastic body

liquid soap dispenser of approved design

Providing & fixing of C.P. brass Soap Dish

17 NS holder of approved design and make. Each 1479.00 3 4437.0

Providing and fixing of C.P. brass Towel

Providing and fixing 600x450 mm

beveled edge mirror of superior glass (of

approved quality) complete with 6 mm

thick hard board ground fixed to wooden

cleats with C.P. brass screws and washers

Providing and fixing of C.P. brass Towel

Providing and fixing CP Brass 32mm size

Bottle Trap of approved quality & make

and as per the direction of Engineer-in-

Digitally signed by DEEPAK

DSR Code g factor NDSR DSR NDSR

Sno Reff Item Unit DSR Rate 6.33% Rate Qty Amount Amount

Supply of solid state, no touch operating,

fully hygienic hand drier of approved

shade with single blower, with time delay,

summer & winter control, music while

drying, volume ON/OFF controls complete

Providing and fixing of Storage type water

heater/ Geyser with required accessories

like 15 mm CP angle valve on inlet & outlet

line, heavy duty reinforced flexible PVC

connector for cold water line and flexible

CP brass connector with CP checkout for

hot water line, CPVC line connection, MS

bracket with two coats of enamel paint,

anchor fastners etc. to hang the units,

providing and fixing of 16 A 3 Pin plug of

Anchor make, etc. complete as required.

20 NS Capacity 15 Liters Each 14804.00 3 44412.0

20 NS Capacity 25 Liters Each 17508.00 4 70032.0

B. WATER SUPPLY (INTERNAL)

Digitally signed by DEEPAK

DSR Code g factor NDSR DSR NDSR

Sno Reff Item Unit DSR Rate 6.33% Rate Qty Amount Amount

Providing and fixing Chlorinated Polyvinyl

Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply,

including all CPVC plain & brass threaded

fittings, i/c fixing the pipe with clamps at

1.00 m spacing. This includes jointing of

pipes & fittings with one step CPVC solvent

cement and the cost of cutting chases and

making good the same including testing of

joints complete as per direction of

Engineer in Charge.

Concealed work, including cutting

chases and making good the walls etc.

1.1 18.8.1 15 mm nominal outer dia Pipes Metre 497.80 529 20 10586.21

1.2 18.8.2 20 mm nominal outer dia Pipes Metre 537.60 572 60 34297.80

1.3 18.8.3 25 mm nominal outer dia Pipes Metre 627.25 667 65 43352.07

1.4 18.8.4 32 mm nominal outer dia Pipes Metre 739.30 786 15 11791.47

Digitally signed by DEEPAK

DSR Code g factor NDSR DSR NDSR

Sno Reff Item Unit DSR Rate 6.33% Rate Qty Amount Amount

Providing and fixing Chlorinated Polyvinyl

Chloride (CPVC) pipes, having thermal

stability for hot & cold water supply,

including all CPVC plain & brass threaded

fittings, including fixing the pipe with

clamps at 1.00 m spacing. This includes

jointing of pipes & fittings with one step

CPVC solvent cement and testing of joints

complete as per direction of Engineer in

Internal work - Exposed on wall

2.1 18.7.1 15 mm dia nominal bore Metre 286.80 305 10 3049.54

2.1 18.7.2 20 mm dia nominal bore Metre 335.00 356 135 48087.74

2.2 18.7.3 25 mm dia nominal bore Metre 401.55 427 145 61910.38

2.3 18.7.4 32 mm dia nominal bore Metre 518.75 552 180 99285.64

2.4 18.7.5 40 mm dia nominal bore Metre 702.95 747 125 93430.84

2.6 DSR _RA 65 mm dia nominal bore Metre 1624.00 1,727 30 51803.98

Providing and fixing G.I. pipes complete

with G.I. fittings including trenching and

3 18.12 refilling etc.

3.2 18.12.4 32 mm dia nominal bore Metre 540.30 575 60 34470.06

3.3 18.12.5 40 mm dia nominal bore Metre 617.05 656 40 26244.37

Digitally signed by DEEPAK

DSR Code g factor NDSR DSR NDSR

Sno Reff Item Unit DSR Rate 6.33% Rate Qty Amount Amount

Providing and fixing ball valve (brass) of

approved quality, High or low pressure,

4 18.18 with plastic floats complete :

Providing and fixing gun metal gate valve

with C.I. wheel of approved quality

5 18.17 (screwed end) :

Digitally signed by DEEPAK

DSR Code g factor NDSR DSR NDSR

Sno Reff Item Unit DSR Rate 6.33% Rate Qty Amount Amount

Providing and fixing motorized valve

including control wiring upto panel &

ON/OFF arrangement and all other

accessories required to make the system

complete including control unit to be made

of good quality PVC box, as per IP 65 with

cable gland also as per IP 65 and suitable

for outdoor installation complete with

suitable wiring. This unit should be suitable

to operate solenoid valve, float switch and

consisting of contactors, control

transformer, MCB, Potential free contacts

for BMS, indicating lamp for automatic

operation of filling OH tank with level to be

mentioned between 70% (low) to 100%

6.1 NS 25mm nominal bore Each 15000.00 2 30000.0

6.2 NS 32mm nominal bore Each 18000.00 2 36000.0

Providing & fixing Auto Air vent for cold

water supply risers, suitable for pressure

8 not less than 15 Kg/Sq.cm.

Digitally signed by DEEPAK

DSR Code g factor NDSR DSR NDSR

Sno Reff Item Unit DSR Rate 6.33% Rate Qty Amount Amount

Providing and placing on terrace (at all

floor levels) polyethylene water storage

tank, IS : 12701 marked, with cover and

suitable locking arrangement and making

necessary holes for inlet, outlet and

overflow pipes but without fittings and the

base support for tank.

C. INTERNAL DRAINAGE (SOIL, WASTE, VENT, RAIN WATER PIPES & FITTINGS)

Digitally signed by DEEPAK

DSR Code g factor NDSR DSR NDSR

Sno Reff Item Unit DSR Rate 6.33% Rate Qty Amount Amount

Providing, jointing, testing and fixing

UPVC Soil, Waste & Vent system

conforming to IS : 13592 (Type-B) and

UPVC fittings (moulded as well as

fabricated) like bends, tees, Y-tees, crosses,

boss connections, access pieces, saddle

pieces, cleanouts, adaptors for connections

to other materials, plugs, reducers, cowls,

offset and other specials. Jointing shall be

done with push fit EPDM ring jointing

technique in general. Solvent cement joints

may be provided for fittings and specials

which are not manufactured with push fit

rubber joints. Fixing at wall/ceiling level

supported by galvanized steel clamps &

hangers etc. Making proper connection

and also pipes may be laid / fixed in

1 sunken floors, under slung from ceiling.

Digitally signed by DEEPAK

DSR Code g factor NDSR DSR NDSR

Sno Reff Item Unit DSR Rate 6.33% Rate Qty Amount Amount

Providing, jointing, testing and fixing

UPVC Rain water system conforming to IS :

13592 (Type -A) and UPVC fittings

(moulded as well as fabricated) like bends,

tees, Y-tees, crosses, boss connections,

access pieces, saddle pieces, cleanouts,

adaptors for connections to other

materials, plugs, reducers, cowls, offset

and other specials. Jointing shall be done

with push fit EPDM ring jointing technique

in general. Solvent cement joints may be

provided for fittings and specials which

are not manufactured with push fit rubber

joints. Fixing at wall/ceiling level

supported by galvanized steel clamps &

hangers etc. Making proper connection

and also pipes may be laid / fixed in

2 sunken floors, under slung from ceiling.

2.1 NS 110 mm dia Type A Metre 570.00 30 17100.0

2.2 NS 160 mm dia Type A Metre 857.00 80 68560.0

Digitally signed by DEEPAK

DSR Code g factor NDSR DSR NDSR

Sno Reff Item Unit DSR Rate 6.33% Rate Qty Amount Amount

Providing, fixing, jointing and testing

UPVC soil, waste, vent pipework

comprising UPVC pipe conforming to IS

:4985-1983 of class 3 (6kg/cm2) as

specified below and fittings (moulded as

well as fabricated) like elbows, bends,

reducers, threaded tail pieces, caps,

suitable elbow with suitable extension

piece for drain point and other specials

jointing with cement solvent, chasing,

cutting and making good the walls & floors

pipes laid in floors shall be encased with

40 mm thick concrete all around, complete

in all respects including testing of

complete installation.(All major MS

structure to hold the stack with fixing

including anchor fasteners, sand, cement

3 etc is included in this item)

3.1 NS 40 mm od 6 kg/cm2 (Class III ) Metre 236.00 40 9440.0

3.2 NS 50 mm od 6 kg/cm2 (Class III ) Metre 263.00 30 7890.0

3.2 NS 63 mm od 6 kg/cm2 (Class III ) Metre 309.00 20 6180.0

Digitally signed by DEEPAK

DSR Code g factor NDSR DSR NDSR

Sno Reff Item Unit DSR Rate 6.33% Rate Qty Amount Amount

Providing and fixing UPVC/SWR trap (P

trap) of self cleaning design as per

IS:13592 : 1992 complete including cost

of cutting and making good the cutouts in

walls and floors etc.including cutting and

making good the walls and floors

wherever required complete.

4.1 NS 110 mm inlet and 110 mm outlet Nos. 328.00 40 13120.0

Providing and fixing floor drain made out

of 110x63 mm OD uPVC elbow connected

to uPVC pipe complete as per direction of

5 NS Project Manager. Nos. 123.00 20 2460.0

Providing and fixing Inlet Fitting for Urinal

trap, formed out of 110 mm PVC pipe with

multiple side inlets formed with saddle

pieces, suitable for 40, 50 and 63 mm dia

side connections as per standard detail

and support through galvanized steel

support from slab or set in cement

concrete mix 1:2:4 including cutting and

making good the walls and floors

wherever required.

Digitally signed by DEEPAK

DSR Code g factor NDSR DSR NDSR

Sno Reff Item Unit DSR Rate 6.33% Rate Qty Amount Amount

Providing and fixing Heavy Class SS

grating of approved design including

setting in floor with cement motor to

match with floor finish as per architect

requirement suitable for waster and FT,

Providing and fixing P.V.C. WC connector

(straight or bend type) with rubber lip

ring. Including 110 mm dia PVC pipe /

bend of required length and proper

connection with M seal to C.I. pipe

complete as required.

Making khurras 45x45 cm with average

minimum thickness of 5 cm cement

concrete 1:2:4 (1 cement : 2 coarse sand :

4 graded stone aggregate of 20 mm

nominal size) over P.V .C. sheet 1 m x1 m x

400 micron, finished with 12 mm cement

plaster 1:3 (1 cement : 3 coarse sand) and

a coat of neat cement, rounding the edges

and making and finishing the outlet

Digitally signed by DEEPAK

DSR Code g factor NDSR DSR NDSR

Sno Reff Item Unit DSR Rate 6.33% Rate Qty Amount Amount

[1] EXTERNAL SEWERAGE SYSTEM

SE SEWERAGE NETWORK

Excavating trenches of required width for

pipes, cables, etc including excavation for

sockets, and dressing of sides, ramming of

bottoms, depth upto 1.5 m, including

getting out the excavated soil, and then

returning the soil as required, in layers not

exceeding 20 cm in depth, including

consolidating each deposited layer by

ramming, watering, etc. and disposing of

surplus excavated soil as directed, within a

2.10.1 All kinds of soil

Pipes, cables etc. exceeding 80 mm dia. but

not exceeding 300 mm

Digitally signed by DEEPAK

DSR Code g factor NDSR DSR NDSR

Sno Reff Item Unit DSR Rate 6.33% Rate Qty Amount Amount

Providing and laying non-pressure NP2

class (light duty) R.C.C. pipes with collars

jointed with stiff mixture of cement mortar

in the proportion of 1:2 (1 cement : 2 fine

sand) including testing of joints etc.

Providing and laying cement concrete

1:5:10 (1 cement : 5 coarse sand : 10

graded stone aggregate 40 mm nominal

size) up to haunches of S.W. pipes

including bed concrete as per standard

Digitally signed by DEEPAK

DSR Code g factor NDSR DSR NDSR

Sno Reff Item Unit DSR Rate 6.33% Rate Qty Amount Amount

Constructing brick masonry manhole with

F.P.S. bricks in cement mortar 1 : 4 (1

cement : 4 coarse sand) RCC top slab with

1 : 2 : 4 mix (1 cement : 2 coarse sand : 4

grade stone aggregate 20mm nominal

size); foundation concrete 1:4:8 mix (1

cement : 4 coarse sand : 8 graded stone

aggregate 40 mm nominal size) inside

plastering 12 mm thick with cement

mortar 1:3 (1cement 3 coarse sand )

finished with a floating coat of neat cement

and making channels in cement concrete

1:2:4 (1cement : 2 coarse sand: 4 graded

stone aggregate 20 mm nominal size)

finishd with a floating coat of neat cement

complete as per standard design

Inside size 90 x 80 cm & 45 cm deep

including CI cover with frame (light duty)

455 x 610mm internal dimension total wt.

of cover & frame to be not less than 38 kg

(wt. of cover 23 kg and wt. of frame 15 kg)

5.1 19.7.1.1 With well burnt bricks each 12770.55 13,579 15 203683.89

Digitally signed by DEEPAK

DSR Code g factor NDSR DSR NDSR

Sno Reff Item Unit DSR Rate 6.33% Rate Qty Amount Amount

Providing orange colour safety foot rest of

minimum 6 mm thick plastic encapsulated

as per IS : 10910, on 12 mm dia steel bar

conforming to IS : 1786, having minimum

cross section as 23 mmx25 mm and over

all minimum length 263 mm and width as

165 mm with minimum 112 mm space

between protruded legs having 2 mm

tread on top surface by ribbing or

chequering besides necessary and

adequate anchoring projections on tail

length on 138 mm as per standard

drawing and suitable to with stand the

bend test and chemical resistance test as

per specifications and having

manufacture's permanent identification

mark to be visible even after fixing,

6 19.16 including fixing in manholes with each 553.70 589 48 28259.96

Providing and fixing square-mouth S.W.

gully trap class SP-1 complete with C.I.

grating brick masonry chamber with water

tight C.I. cover with frame of 300 x300

mm size (inside) the weight of cover to be

not less than 4.50 kg and frame to be not

less than 2.70 kg as per standard design:

Digitally signed by DEEPAK

DSR Code g factor NDSR DSR NDSR

Sno Reff Item Unit DSR Rate 6.33% Rate Qty Amount Amount

19.4.2 150x100 mm size P type

With common burnt clay F.P.S. (non

19.4.2.1 modular) bricks of class designation 7.5 each 2734.20 2,907 8 23258.20

Making connection of drain or sewer line

with existing manhole including breaking

into and making good the walls, floors

with cement cincrete 1:2:4 mix (1cement:

2 coarse sand : 4 graded stone aggregate

20mm nominal size) cement plastered on

both sides with cement mortar 1:3

(1cement : 3 coarse sand) finished with a

floating coat of neat cement and making

necessary channels for the drain etc.

complete for pipes 100 to 250mm dia.

19.21.1 For pipes 100 to 250 mm diameter Item 810.45 862 1 861.75

SE DRAINAGE NETWORK

Digitally signed by DEEPAK

DSR Code g factor NDSR DSR NDSR

Sno Reff Item Unit DSR Rate 6.33% Rate Qty Amount Amount

Excavating trenches of required width for

pipes, cables, etc including excavation for

sockets, and dressing of sides, ramming of

bottoms, depth upto 1.5 m, including

getting out the excavated soil, and then

returning the soil as required, in layers not

exceeding 20 cm in depth, including

consolidating each deposited layer by

ramming, watering, etc. and disposing of

surplus excavated soil as directed, within a

2.10.1 All kinds of soil

Pipes, cables etc. exceeding 80 mm dia. but

not exceeding 300 mm

Providing and laying non-pressure NP2

class (light duty) R.C.C. pipes with collars

jointed with stiff mixture of cement mortar

in the proportion of 1:2 (1 cement : 2 fine

sand) including testing of joints etc.

Digitally signed by DEEPAK

DSR Code g factor NDSR DSR NDSR

Sno Reff Item Unit DSR Rate 6.33% Rate Qty Amount Amount

Providing and laying cement concrete

1:5:10 (1 cement : 5 coarse sand : 10

graded stone aggregate 40 mm nominal

size) up to haunches of S.W. pipes

including bed concrete as per standard

Constructing brick masonry road gully

chamber 45x45x77.5 cm with bricks in

cement mortar 1:4 (1 cement : 4 coarse

sand) including 500x450 mm pre-cast

R.C.C. horizontal grating with frame

complete as per standard design :

With common burnt clay F.P.S. (non

19.28.1 modular) bricks of class designation 7.5 each 6889.80 7,326 10 73259.24

Digitally signed by DEEPAK

DSR Code g factor NDSR DSR NDSR

Sno Reff Item Unit DSR Rate 6.33% Rate Qty Amount Amount

Constructing brick masonry manhole with

F.P.S. bricks in cement mortar 1 : 4 (1

cement : 4 coarse sand) RCC top slab with

1 : 2 : 4 mix (1 cement : 2 coarse sand : 4

grade stone aggregate 20mm nominal

size); foundation concrete 1:4:8 mix (1

cement : 4 coarse sand : 8 graded stone

aggregate 40 mm nominal size) inside

plastering 12 mm thick with cement

mortar 1:3 (1cement 3 coarse sand )

finished with a floating coat of neat cement

and making channels in cement concrete

1:2:4 (1cement : 2 coarse sand: 4 graded

stone aggregate 20 mm nominal size)

finishd with a floating coat of neat cement

complete as per standard design

Inside size 90 x 80 cm & 45 cm deep

including CI cover with frame (light duty)

455 x 610mm internal dimension total wt.

of cover & frame to be not less than 38 kg

(wt. of cover 23 kg and wt. of frame 15 kg)

19.7.1.1 With well burnt bricks each 12770.55 13,579 15 203683.89

Digitally signed by DEEPAK