Construction of four set staff Quarter at MSC Tongsted

Amount

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: A. All kinds of soil :

B. Ordinary Rock

C. hard rock

Dry stone pitching (any thickness) excluding cost of stones. On Horizontal including carriage complete job

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Horizontal including carriage complete job

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) Horizontal including carriage complete job

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) Horizontal including carriage complete job

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 Horizontal including carriage complete job Horizontal including carriage complete job mm nominal size) Horizontal including carriage complete job

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or morel including carriage complete job

Centering and shuttering including strutting, propping etc. and removal of form for: a) Foundations, footings, bases of columns etc. for mass concrete.

Columns, pillars, piers, abutments, posts and struts.

Lintel, beams, plinth beams, girders, bressumers and cantilevers

Suspended floors, roofs, landings, balconies and access platforms.

Providing and Constructing cement stabilized mud block masonry (mud block made out of soil containing 60% to 70% of sand and 10% of clay and 5% of cement pressed using manual machine) in cement mortar 1:4 in walls. The size of the block is 305x143x100 mm. laid in course cement mortar as per the direction of Engineer in-charge Horizontal including carriage complete job Outer Wall Only

Providing and fixing up-to floor five level precast cement concrete solid blocks including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering and complete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate of 20mm nominal size) Horizontal including carriage complete job

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate Horizontal including carriage complete job

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) Horizontal including carriage complete job

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand ) Horizontal including carriage complete job

Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 (1 cement: 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement: 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. Ordinary cement finish using ordinary cement Horizontal including carriage complete job

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer.

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. Horizontal including carriage complete job

Providing and fixing factory made uPVC Fenesta, Saint Goblin, NCL Veka (colour as directed by the site engneer) casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sashshall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) 9.149A.4 Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Arof window above 0.75 sqm.) Casement window double panels with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash / mullion 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 1.50 sqm).including carriage complete job

Providing and fixing stainless steel (SS-304 grade) friction hinges to the side/ top hung UPVC windows, of approved quality, with necessary stainless steel screws etc. as per direction of Engineer-in-charge.

Providing and fixing casement handle made of zinc alloyed (white powder coated) for UPVC casement window with necessary screws etc. complete.

Providing and fixing zinc alloyed (white powder coated) touch lock for UPVCsliding window with necessary screws etc. complete

Providing and fixing steel roller for UPVC sliding window with necessary screws etc. complete.

Providing and fixing steel (white powder coated) crescent lock for UPVC sliding window/ door with necessary screws etc. complete

Fixing double glazed incl (DGU) conforming of 6 mm thrice tuffan glass on either side with 12 mm thick inert gape in the DGU shall be processed for reputing glass processer.

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 35mm

Providing and fixing pre-laminated flooring of approved brand like action Tesa, green ply or equivalent. Complete job.

Providing and fixing toungud and grooved panalling on wall over 12 mm thick plywood as dricted by side engineer incharge complete job.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :Budloo / Fir wood

Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) : 12mm thick 12.35.1 Veener teak ply insulating board

Wooden planking, tongued and grooved in flooring including fixing with iron screws complete: 35 mm thick Budloo/fir wood

Providing and fixing thermocole 50mm thickness.

Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing white vitreous china pedestal type water closet ( Indian type) with seat and lid , 10 litre low level white vitreous china flushing cistern and CP flush with fittings, C. I./M.S. brackets 40mm bend diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors , wherever required: W.C. pan with lSI marked white solid plastic seat and lid. with white vitreous china flushing cistern & C. P. flush bend.

Providing and fixing G.I inlet connection for flush pipe connecting with W.C pan.

Extra for providing coloured other then black solid PVC plastic seat and cover in European type WC pan instead of white plastic seat and cover.

Providing and fixing jet for western type water closet

Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous ChinaWash basin size 550x400 mm with a pair of 15 mm C. P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) by way of self regulating heat cable / K -flex wire 19 mm / tape/ rock wool / chicken mesh /black polythine/28/26 guage aluminium sheet with screws including labour charge . complete as per direction of Engineer in Charge. PN-16 pipe , 25mm OD(SDR-7.4)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) by way of self regulating heat cable / K -flex wire 19 mm / tape/ rock wool / chicken mesh /black polythine/28/26 guage aluminium sheet with screws including labour charge . complete as per direction of Engineer in Charge. PN-16 pipe , 32mm OD(SDR-7.4)

Providing and fixing PVC soil waste and vent pipe of required dia including bends, Tee door bend, L bend trap jointed with addisive material ISI marked by way of tape/ rock wool / chicken mesh /black polythine/28/26 guage aluminium sheet with screws including labour charge a) 100mm

Providing and fixing PVC soil waste and vent pipe of required dia including bends, Tee door bend, L bend trap jointed with addisive material by way of tape/ rock wool / chicken mesh /black polythine/28/26 guage aluminium sheet with screws including labour charge a) 75mm

Providing and fixing 75mm PVC floor or Nahani trap.

Providing and fixing over head shower

Providing and fixing toilet paper holder c.p brass

Providing and fixing soap dish

Providing and fixing towel rail. 600 mm long

Providing and fixing towel ring

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P brass screw and washers complete.

Providing and fixing CP brass basin mixer pillar tap of approved quality and make

Providing and fixing CP wall mixer of standard design and approved quality and make

Providing and fixing CP brass bib cock of approved quality and make

Providing and fixing CP brass stop cock of approved quality and make

Providing and fixing floor jail

Stainless steel kitchen sink - with drain board 460X915 MM bowl. depth 178 mm

Constructing masonry Chamber 30x30x50 cm, inside with precast cement concrete solid block in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design:Inside dimensions 500x700 mm and 45 cm deep for single pipe line with one or two inlets Horizontal including carriage complete job

Providing and laying Polished Granite stone flooring in required designand patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent including carriage complete job Horizontal including carriage complete job

Edges of slabs and breaks in floors and walls 5.16.1.1 Under 20 cm wide

providing and fixing local Ornamental Shingstak.

Providing and fixing hand rail of approved size steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.

Insulated for over head (Sintex) of specified capacity in ltrs as site requirement 4" including nitrate sheet 19 mm solution proper tape / rock wool chicken mesh/ black poilythine , 28/26 guage aluminium sheet with necessary screws and labour complete job

Providing and fixing 0.5 Hp water motor pump

Providing and fixing strips in joints of terrazzo/ cement concrete floors. Glass strips 40 mm wide and 4 mm thick

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture of wood work

French spirit polishing with two or more coats on new work incl wood filter

Structural steel work in built up section and frames work, including cutting, hoisting, fixing in position

providing and fixing solar water heater 100 litre approved by side engineer incharge including all fitting. including carriage complete job

Wiring for light point/ fan/ exhaust fan/call bell point / 6 amp socket point with 1.5 sq mm FR PVC insulated copper cable in existing surface/recessed pvc conduit but without control switch and without box as required.

Wiring for 16 amp socket outlet with 4 sq mm FR PVC insulated copper conductor cable in existing surface / recessed PVC conduit/PVC casing including wooden box, sheet complete as required.

Wiring for 16 amp socket outlet with 4 sq mm FR PVC insulated copper conductor cable in existing surface / recessed PVC conduit/PVC casing including wooden box, sheet complete as required.

Wiring for 16 amp socket outlet with 4 sq mm FR PVC insulated copper conductor cable in existing surface / recessed PVC conduit/PVC casing including wooden box, sheet complete as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. a) 5/6 A switch

b) 3 pin 5/6 A socket outlet

c) 15/16 A switch

d ) 6 pin 15/16 A switch

Wiring for sub main wiring with following size of PVC insulated copper conductor single core cable in existing surface/ recessed pvc conduit/ casing as required. a) 2 X 1.5 sq. mm + 1 X 2.5 sq. mm earth wire

a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earta) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

c) 4 x16sq. mm + 1X 6 sq. mm earth wire

Supplying and fixing of a 10 amp 240 volt single pole grid plate mounted switch/ indicator with moulded cover plate including recessed zinc chromate passivated MS box complete as required , including connection

Supplying and fixing of a 10 amp 240 volt single pole grid plate mounted switch/ indicator with moulded cover plate including recessed zinc chromate passivated MS box complete as required , including connection

Supplying and fixing of a combined 3 pin 240 volt 20 amp socket outlet with safety shutters and 20 amp 240 volt single pole grid plate mounted swith with moulded cover plate in recessed cover plate in recessed zinc chromate passivated MS box complete as required.

Supply and fixing of following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned busbar, neutral link, earth bar, din bar, detachable gland plates, double door, interconnections, including painting etc as required.a) 6 way (4+18) Double Door

a) 8 way (4+24 )Double Door

Supplying and fixing of 240 volt, miniature circuit breaker of following poles in the existing MCB DB complete with connection, testing and commissioning etc as required.a) Single Pole 6/10/16/20 amp.

b ) Double Pole 40 amp.

Supplying and fixing of Following light fitting with lamps on ceiling/ wall with necessary connection from ceiling rose to fitting by twin core flexible copper wire etc as required.t LED tube light fitting.

a) 20 WATT LED tube light/concelled light fitting of Philips/ Cromptom/Havells/equalent.

Supplying and fixing of Angle/Baten Holder with 9 watt LED Blub polycarbonate including making complete connnections etc as required.

Supply, laying and fixing of 16 sq mm 2 core aluminum conductor PVC insulated & PVC sheathed cable.

Providing and fixing 100 amp. Change over MCB type.

Supplying and fixing of following electrical items suitable for operating on 240 /230 volts AC, 50 HZ supply, including connection etc. as required. Exhaust fan 300 mm size ( Heavy duty) CG transair or equivalent approved make

Supplying and fixing 3 pin, 5A ceiling rose on the existing junction box/wooden block including connection as required

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. A. Module 4 way

b. Module 6 way

c.Module 8 way

d. Module 12 way

M/S KUNZANG GYATSO