PROVN OF FOL STORE SHED AT ENGR REGT AND OTHER SANCTIONED WORKS IN THE AREA OF AGE B/R I UNDER GE PANAGARH

Amount

Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

Removing excavated spoil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and as directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n.exc 15 cm thick, spread, levelled and rammed including watering complete complete all as specified and as directed

M&L for PCC type D2 1:4:8 (using 40 mm graded stone aggregate) as in foundations, fillings and mass concrete complete all as specified and as directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per item No 6.00 mentioned above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for flat fair finished surfaces of concrete complete all as specified and as directed.

M&L for RCC (Design mix) M-25 type B1, (using 20 mm graded stone aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for formwork for rough finished surface of concrete (flat surface) to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified and as directed.

M&L for reinforced cement concrete (Design Mix) M-25 (using 20mm graded stone aggregate) in columns, pillars, piers, etc complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough flat surfaces complete all as specified and as directed.

M&L for reinforced cement concrete (Design Mix) M-25 Type B1 (using 20mm graded stone aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

S&F Roof trusses (framed) of angle iron members trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. using Fe-410-W(Gde E-250) quality-A complete all as specified and as directed.

S&F Framed work as in doors or gates of angle or other section of Fe 410 -W (Gde- E- 250) quality-A Fe with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing incl. sliding door bolt complete all as specified and as directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment using Fe 410 -W (Gde E- 250) quality A complete all as specified and as directed.

M&L for preparation of painting of new steel surfaces over 10 cm in width or girth over a coat of primer using red oxide and applying two coats of synthetic enamel paint complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating @150 GSM GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminum zinc coating @150 GSM GI based Plain steel as in ridges sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L for brickwork with fly ash old sized bricks, straight or curved on plan exc 6 m mean radius, built in CM (1:6) complete all as specified and as directed.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:6) and finishing fair even and smooth without using extra cement complete all as specified and as directed.

M&L for Hardcore using broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 75 mm thick cement concrete type C2, for PCC (1:3:6) (using 40 mm graded stone aggregate) used as in sub base, sub floor/pavings and finishing cement concrete surface without using extra cement complete all as specified and as directed.

S&F Glass dividing strips, 38x3 mm thick and inserted in position to confirm the design complete all as specified and as directed.

M&L for PCC (1:2:4) 40 mm thick Type B1 (using 20 mm graded stone aggregate) used as in floor/pavings and finishing cement concrete surface even and smooth with using extra cement complete all as specified and as directed.

M&L for 75 mm thick cement concrete type C1, 1:3:6 (using 20 mm graded stone aggregate) in plinth protections/ hard standing finishing the surface without extra cement even and smooth complete all as specified and as directed.

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:4) and finishing fair even and smooth without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

S&F steel ventilator with top hung shutter (minimum wt. of steel section should be 1.42 kg/M) including hinges, steel peg stay, complete with glazing bars, dovetailed or welded, including making good disturbed surfaces as per existing specfication complete all as specified and directed.

S&F Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.

S&F Stainless steel wire cloth ,0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

M&L for preparing newly plastered surfaces of walls and applying with three coats of white wash on walls complete all as specified and as directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)

M&L for 40 mm thick Damp proof course to horizontal or vertical surfaces incl. necessary form work in cement concrete 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.as specified & directed by Engr-in-Charge

M&L for Machine pressed precast pre-polished concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M- 35 Grade with grey cement and pigments complete all as specified and as directed.

Excavating in post holes (or similar holes) trenches each n exc 0.5 cum getting out, returning filling in, and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm in soft/loose soil, complete all as specified and directed.

S&F mild steel screw bolts (machine made)with hexagonal or square heads at one end and screw other .and each screw end to be fixed with washers and nut exc 5 cm but n.exc 10 cm long with 5 -10 mm neck diameter of bolt complete all as specified and directed

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4 )and finish smooth & even with using extra cement complete all as specified and directed.

M&L for Preparing new surfaces of walls plastered and applying with three coats of white wash on walls complete all as specified and directed.

Excavating over areas, n.exc 1.5 m deep and getting out soft / loose soil complete all as specified and directed.

M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L for fixing PVC (SWR) pipes of 110 mm bore diameter single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

M&L for preparing new surfaces of walls and applying white washing with 03 coats on walls complete all as specified.

Excavating in post holes(or similar holes) trenches each n.exc 0.5 cum getting out, returning filling in, and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm in soft/loose soil, complete all as specified

M&L for Providing precast cement concrete louvres and jallies, type B0 1:2:4 (using 12.5mm graded stone aggregate), 25mm thick (measured solid), including all mouldings but excluding frame (Pre cast frame shall be measured separately and paid for under item and set in CM (1:4) complete all as specified and directed

M&L for cast- in- situ cement concrete in Type B0 1:2:4 (12.5 mm graded aggregate) in lintels upto 1.5 m clear span, cills,steps and other similar bands, plinth courses,string courses and railings upto 60cm in height ,copings,apex stones,kerbs and the like including weathering ,slightly rounded or chamfered angles and throating as desired complete all as directed by the Engr-in-charge.

Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft /loose soil complete all as specified and directed

Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and exc 1.5 m in depth but n.exc 3.00 m and getting out in soft /loose soil complete all as specified and directed

M&L for Mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for Reinforced cement concrete (Design mix) M-25 (using 20mm graded stone aggregate) in Beams, lintels over 1.5m span complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12 mm thick in cement mortar 1:3 and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding and polishing with brass screw complete all as specified and directed.

E/M PORTION M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)

S&F epoxy powder coated sheet metal enclosure for DBs, single door, Single pole and neutral, 4 ways, with mounting fitted with 200 Amps rated bus bar, DIN channel, neutral link and incoming contact complete all as specified and directed. Make : ABB/Legrand/Hager/Schneider

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed Make :Havells/ABB/Legrand.

S&F in repairs MCB SPN 32 Amps, 'C' series 10 KA, 240 Volts and to be housed in DBs complete including necessary connection complete all as specified and directed (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating) Make : ABB/Legrand/Hager/Schneider

S&F Post Top lantern LED type 20 watt 230volt outdoor type with decorative post top for 360degree indirect light IP 65 Protection with impact and corrosion resistant suitable for service brecate dia 40mm GI pipe complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as specified and directed.

S&F Post Top lantern LED type 40 watt 230volt outdoor type with decorative post top for 360degree indirect light IP 65 Protection with impact and corrosion resistant suitable for service brecate dia 40mm GI pipe complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as specified and directed.

S&F XLPE armoured cable 6 sqmm 4 core,1100 volts grade heavy duty cable,ISI marked passing through pipe, with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed complete all as sepcified. (Note : Both end of cable lug / themble, cable gland and GI saddle is deemed included in quoted rate)

Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed. (Note : Punned thickness i.e 18cm thick shall be measured).

M&L for sub class B bricks fly ash locally available of size 25 x 12.5 x 7.5 cm laid dry width wise across the line of cable in trenches for protection of UG cable complete all as specified and directed.

S&F GI Light grade 40 mm dia of size for road cross/cutting on wall floor drain etc complete all as specified and directed

S.D.ENTERPRISE

N B CONSTRUCTION

M/S DYNAMIC INDIA (PROJECT) CONSTRUCTION

SINGH CONSTRUCTION

M/S TILKU ENTERPRISE

M/S S M ENTERPRISE

S.P.S. SUPPLIERS

SANJAY KUMAR SUPAN