Dismantling Old Causeway in Adayar River at Cowl Bazar Bridge in Gerugambakkam Village in Kundrathur Taluk of Kancheepuram District and Construction of Double Vent inlet in the right bank of Kosasthalaiyar river at LS124000 m in DS in Jayarampuram

Amount

Kosasthalaiyar River @ Ls 116200 m

Kosasthalaiyar river bund at LS 124000 m

Kosasthalaiyar River @ Ls 115300 m

Adayar River at Cowl Bazar Bridge

Description of Work / Item(s)

Amount

Earthwork excavation for cut opening tank bund excavation with iniial lead of 10m and lift of 2m in hard stiff clay , stiff black cotton soil, hard red earh, shales, murams, stoney earth and earth mixed with small size boulders including refilling etc. complete complying with standard specifications and as directed by the departmental officers

Earthwork excavation for foundation in all soils inclusive of refilling the sides of foundation, shoring, strutting and bailing out water wherever necessary, well rammed, consolidated and depositing the surplus earth in places as shown by the departmental officers with an initial lead of 10 (Ten) metres and initial lift of 2 (Two) metres and clearing, leveling the site etc, complete as directed by the Engineer in charge of works and as per the technical specifications

Supplying and filling with M sand in layers of not more than 15 cm thick including watering, consolidation etc., complete complying with standard specification and as directed by the departmental officers.

Providing and placing in position of Plain Cement Concrete M 10 using M sand and hard blue granite broken stone jelly of size 40 mm mixing with mixer machine and laying including the cost of bailing/pumping out of surface water wherever necessary laying the concrete in layers of not exceeding 15 cm thick, compacting, consolidation by using vibrators, finishing, watering, curing etc. complete complying with standard specifications and as directed by the departmental officers

Supplying and erecting centring for vertical plain / RCC concrete walls of supply channel, retaining wall etc of follwing height with necessary supports, all cross bracing with mild steel size of 90 cm x 60 cm and gauge BG 10 stiffened with welded mild steel sheet angles of size 25 mm x 25 mm x 3 mm for bearing laid silver Oak / Country wood joist of size 7.50 cm x 5.0 cm spaced @ about 90 cm C / C and supported by Casurina props of 10 cm to 13 cm spaced @ 75 cm C / C, etc., complete complying with standard specifications and as directed by the departmental officers (Vertical centering)

0 m to 0.90 m Height

0 m to 1.80 m Height

0 m to 2.70 m or 3.00 m Height

Supplying and erecting centering for sides and soffits and strutting upto 3.0 m height for plane surfaces such as RCC works etc, with all cross bracing with mild steel size of 90 cm x 60 cm and gauge BG 10 stiffened with welded mild steel sheet angles of size 25 mm x 25 mm x 3 mm for bearing laid silver Oak / Country wood joist of size 10 cm x 6.5 cm spaced @ about 90 cm C / C and supported by Casurina props of 10 cm to 13 cm spaced @ 75 cm C / C, and removing the same without any damages etc., complete complying with standard specifications and as directed by the departmental officers. (Horizontal centering)

Providing and placing in position of plain cement concrete M 15 grade using M Sand and graded hard blue granite broken stone jelly of 60% 40 mm size and 40% of 20 mm size mixing with mixer machine and laying in layers including the cost of bailing / pumping wherever necessary laying the concrete in layers of not exceeding 15 cm thick, compacting, consolidation by using Vibrators, finishing, watering, curing, etc., complete complying with standard specifications and as directed by the departmental officerscomplying with standard specifications and as directed by the departmental officers

Providing and placing in position of Reinforced Cement Concrete M 20 using M Sand and hard blue granite broken stone jelly of 20 mm size mixing with mixer machine including the cost of bailing / pumping out of surface water wherever necessary laying the concrete in layers of not exceeding 15 cm thick, excluding from works centering, shutterng and steel fabrications, compacting, consolidation by using Vibrators, finishing, watering, curing, etc., complete complying with standard specifications and as directed by the departmental officers

Supplying, fabricating and placing in position of Mild Steel or Ribbed Tor Steel for all RCC works as per design & drawing given including cost of steel, binding wire and labour charges for cutting, bending, laying in position and tying with binding wire, etc. complete complying with standard specifications and as directed by the departmental officers

Providing and placing in position of plain cement concrete M 20 grade using M Sand and hard blue granite broken stone jelly of size 20 mm size mixing with mixer machine including the cost of bailing/pumping out the surface waterwherever necessary laying the concrete in layers of not exceeding 15 cm thick, ccompacting, consolidation by using vibrators, finishing, watering, curing etc

Refilling with excavated soil (other than sand) complying with standard specification for filling in foundation,bund and basement.

Fabricating, supplying and erection of Screw Gearing Steel Shutters of size above 1.00m and up to 2.00m width consist of skin plate made out of 8mm thick Mild Steel plate and horizontally stiffened with 100x50mm mild steel channel (ISMC) at an interval not more than 0.50m and vertical stiffeners made out of same section at an interval not more than 0.60m and provided with 8mm thick Mild Steel gusset plate of required size on both sides fastened with rust free bolts and nuts etc. Conveying the fabricated shutter by using lorries including loading, unloading and leading the shutter to the vent. Dismantling the eroded shutter and shuttering arrangements by using necessary gas cutting equipments. Erecting the new shutter and the shuttering arrangements in the vent in proper position by using necessary hoisting equipments. The shutter shall be painted with two coats of Anticorrosive black paint over one coat of Red oxide primer. The rate including cost of materials, consumables, labours, power charges, conveyance charges, charges for all equipments required conveying the dismantled materials to the section stores, cost of petty civil works, trial operation of shutter and warranty for 5 years etc., complete

Fabricating Supplying and fixing of shutter Groove Angle made up of 100x100x10mm Mild steel angle for required height including welding hold fast of size 40x40x6mm Mild steel angle 3nos on both sides and conveying and leading the groove angle to the vents. Fixing the angle to the grooves in proper alignment including dismantling the existing damaged groove angles, conveying and stacking at section store. The Groove angle should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, consumables, labours, charges for all fabricating and hosting equipments, conveyance, petty civil works and including all other taxes etc., complete complying with standard specifications and as directed by the departmental officers

Fabricating, supplying and fixing of 63 mm dia Screw Rod made up of Mild Steel duly machined and fully threaded to suit the Head set Assembly and provided with required holes. Conveying and leading the screw rod to the worksite. Fixing the screw rod to the shutter gusset plate with required bolt and nut in proper alignment to the head set including dismantling the existing damaged screw rod, conveying and stacking at section store. The Screw rod should be painted with two coats of Anticorrosive black paint over one coat of red oxide primer. The rate including cost of materials, labours, charges for all fabricating and hoisting equipments, conveyance, conveyance charges for labours and material and warranty for 5 years etc., complete.

Fabricating, Supplying and fixing of Top Beam made out of 200 x 100mm (ISMB 200) duly drilled to suit the Head set Assembly with required bed bolt made out of 25mm Mild Steel Round duly threaded with suitable anchorage arrangements to a height of 0.60 m with necessary Fish plate made out of 16 mm Mild Steel Plate of size 0.20 x 0.30m 2 Nos. with required holes. Conveying and leading the top beam arrangements to the work site. Fixing the top beam arrangements at the top of the vent to correct position including dismantling the existing eroded top beam, conveying and stacking at the section store. The top beam should be painted with two coat of Anticorrosive black paint over one coat of Red Oxide primer. The rate including cost of materials, labours, charges for all fabricating and hoisting equipments, cost of petty civil work, conveyance charges for labours and materials and warranty for 5 years etc complete

Fabricating, Supplying and fixing of Head Set Assembly medium duty with hexagonal nut(approximate 70 Kg) made up of cast iron including moulding, machining and the hexagonal nut threaded to suit the Screw Rod provided with thrust bearings for smooth operation. Conveying and leading the head set assembly to the work site. Fixing the head set assembly to the top beam by using required bolts and nuts in proper alignment including dismantling the existing damaged Head set assembly, conveying and stacking at section store. The Head set assembly supplied with operating key and the both should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, labours, charges for wooden pattern, moulding and charges for all machining equipments, conveyance charges for labours and materials and warranty for 5 years etc.,complete.

Supplying and fixing the Cement concrete block of size 300 mm X 250 mm X 200 mm of M 15 using hard blue granite broken stone jelly of 20 mm size mixing with mixer machine including the cost and conveyance of all materials to work site, labour charges for fixing the same in position and including all other incidental charges, compacting, consolidation by using vibrators, finishing, watering, curing etc complete complying with standard specifications and as directed by the departmental officers

Pointing with cement mortar 1:3 (One cement and three sand ) to full depth including finishing, watering, curing etc. complete complying with standard specifications and as directed by the departmental officers ( Flush pointing )

Hiring the Poclain 200 on hour Basis for clearing the site and removing the jungle, obstructions in the surplus course and removal of shoals in bed of channel and closing the damages in channel etc., complete complying with standard specifications and as directed by the departmental officers.

GST 18% IN FIGURES

Description of Work / Item(s)

Amount

Earthwork excavation for cut opening tank bund excavation with iniial lead of 10m and lift of 2m in hard stiff clay , stiff black cotton soil, hard red earh, shales, murams, stoney earth and earth mixed with small size boulders including refilling etc. complete complying with standard specifications and as directed by the departmental officers

Earthwork excavation for foundation in all soils inclusive of refilling the sides of foundation, shoring, strutting and bailing out water wherever necessary, well rammed, consolidated and depositing the surplus earth in places as shown by the departmental officers with an initial lead of 10 (Ten) metres and initial lift of 2 (Two) metres and clearing, leveling the site etc, complete as directed by the Engineer in charge of works and as per the technical specifications

Supplying and filling with M sand in layers of not more than 15 cm thick including watering, consolidation etc., complete complying with standard specification and as directed by the departmental officers.

Providing and placing in position of Plain Cement Concrete M 10 using M sand and hard blue granite broken stone jelly of size 40 mm mixing with mixer machine and laying including the cost of bailing/pumping out of surface water wherever necessary laying the concrete in layers of not exceeding 15 cm thick, compacting, consolidation by using vibrators, finishing, watering, curing etc. complete complying with standard specifications and as directed by the departmental officers

Supplying and erecting centring for vertical plain / RCC concrete walls of supply channel, retaining wall etc of follwing height with necessary supports, all cross bracing with mild steel size of 90 cm x 60 cm and gauge BG 10 stiffened with welded mild steel sheet angles of size 25 mm x 25 mm x 3 mm for bearing laid silver Oak / Country wood joist of size 7.50 cm x 5.0 cm spaced @ about 90 cm C / C and supported by Casurina props of 10 cm to 13 cm spaced @ 75 cm C / C, etc., complete complying with standard specifications and as directed by the departmental officers (Vertical centering)

0 m to 0.90 m Height

0 m to 1.80 m Height

0 m to 2.70 m or 3.00 m Height

Supplying and erecting centering for sides and soffits and strutting upto 3.0 m height for plane surfaces such as RCC works etc, with all cross bracing with mild steel size of 90 cm x 60 cm and gauge BG 10 stiffened with welded mild steel sheet angles of size 25 mm x 25 mm x 3 mm for bearing laid silver Oak / Country wood joist of size 10 cm x 6.5 cm spaced @ about 90 cm C / C and supported by Casurina props of 10 cm to 13 cm spaced @ 75 cm C / C, and removing the same without any damages etc., complete complying with standard specifications and as directed by the departmental officers. (Horizontal centering)

Providing and placing in position of plain cement concrete M 15 grade using M Sand and graded hard blue granite broken stone jelly of 60% 40 mm size and 40% of 20 mm size mixing with mixer machine and laying in layers including the cost of bailing / pumping wherever necessary laying the concrete in layers of not exceeding 15 cm thick, compacting, consolidation by using Vibrators, finishing, watering, curing, etc., complete complying with standard specifications and as directed by the departmental officerscomplying with standard specifications and as directed by the departmental officers

Providing and placing in position of Reinforced Cement Concrete M 20 using M Sand and hard blue granite broken stone jelly of 20 mm size mixing with mixer machine including the cost of bailing / pumping out of surface water wherever necessary laying the concrete in layers of not exceeding 15 cm thick, excluding from works centering, shutterng and steel fabrications, compacting, consolidation by using Vibrators, finishing, watering, curing, etc., complete complying with standard specifications and as directed by the departmental officers

Supplying, fabricating and placing in position of Mild Steel or Ribbed Tor Steel for all RCC works as per design & drawing given including cost of steel, binding wire and labour charges for cutting, bending, laying in position and tying with binding wire, etc. complete complying with standard specifications and as directed by the departmental officers

Providing and placing in position of plain cement concrete M 20 grade using M Sand and hard blue granite broken stone jelly of size 20 mm size mixing with mixer machine including the cost of bailing/pumping out the surface waterwherever necessary laying the concrete in layers of not exceeding 15 cm thick, ccompacting, consolidation by using vibrators, finishing, watering, curing etc

Refilling with excavated soil (other than sand) complying with standard specification for filling in foundation,bund and basement.

Fabricating, supplying and erection of Screw Gearing Steel Shutters of size above 1.00m and up to 2.00m width consist of skin plate made out of 8mm thick Mild Steel plate and horizontally stiffened with 100x50mm mild steel channel (ISMC) at an interval not more than 0.50m and vertical stiffeners made out of same section at an interval not more than 0.60m and provided with 8mm thick Mild Steel gusset plate of required size on both sides fastened with rust free bolts and nuts etc. Conveying the fabricated shutter by using lorries including loading, unloading and leading the shutter to the vent. Dismantling the eroded shutter and shuttering arrangements by using necessary gas cutting equipments. Erecting the new shutter and the shuttering arrangements in the vent in proper position by using necessary hoisting equipments. The shutter shall be painted with two coats of Anticorrosive black paint over one coat of Red oxide primer. The rate including cost of materials, consumables, labours, power charges, conveyance charges, charges for all equipments required conveying the dismantled materials to the section stores, cost of petty civil works, trial operation of shutter and warranty for 5 years etc., complete

Fabricating Supplying and fixing of shutter Groove Angle made up of 100x100x10mm Mild steel angle for required height including welding hold fast of size 40x40x6mm Mild steel angle 3nos on both sides and conveying and leading the groove angle to the vents. Fixing the angle to the grooves in proper alignment including dismantling the existing damaged groove angles, conveying and stacking at section store. The Groove angle should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, consumables, labours, charges for all fabricating and hosting equipments, conveyance, petty civil works and including all other taxes etc., complete complying with standard specifications and as directed by the departmental officers

Fabricating, supplying and fixing of 63 mm dia Screw Rod made up of Mild Steel duly machined and fully threaded to suit the Head set Assembly and provided with required holes. Conveying and leading the screw rod to the worksite. Fixing the screw rod to the shutter gusset plate with required bolt and nut in proper alignment to the head set including dismantling the existing damaged screw rod, conveying and stacking at section store. The Screw rod should be painted with two coats of Anticorrosive black paint over one coat of red oxide primer. The rate including cost of materials, labours, charges for all fabricating and hoisting equipments, conveyance, conveyance charges for labours and material and warranty for 5 years etc., complete.

Fabricating, Supplying and fixing of Top Beam made out of 200 x 100mm (ISMB 200) duly drilled to suit the Head set Assembly with required bed bolt made out of 25mm Mild Steel Round duly threaded with suitable anchorage arrangements to a height of 0.60 m with necessary Fish plate made out of 16 mm Mild Steel Plate of size 0.20 x 0.30m 2 Nos. with required holes. Conveying and leading the top beam arrangements to the work site. Fixing the top beam arrangements at the top of the vent to correct position including dismantling the existing eroded top beam, conveying and stacking at the section store. The top beam should be painted with two coat of Anticorrosive black paint over one coat of Red Oxide primer. The rate including cost of materials, labours, charges for all fabricating and hoisting equipments, cost of petty civil work, conveyance charges for labours and materials and warranty for 5 years etc complete

Fabricating, Supplying and fixing of Head Set Assembly medium duty with hexagonal nut(approximate 70 Kg) made up of cast iron including moulding, machining and the hexagonal nut threaded to suit the Screw Rod provided with thrust bearings for smooth operation. Conveying and leading the head set assembly to the work site. Fixing the head set assembly to the top beam by using required bolts and nuts in proper alignment including dismantling the existing damaged Head set assembly, conveying and stacking at section store. The Head set assembly supplied with operating key and the both should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, labours, charges for wooden pattern, moulding and charges for all machining equipments, conveyance charges for labours and materials and warranty for 5 years etc.,complete.

Supplying and fixing the Cement concrete block of size 300 mm X 250 mm X 200 mm of M 15 using hard blue granite broken stone jelly of 20 mm size mixing with mixer machine including the cost and conveyance of all materials to work site, labour charges for fixing the same in position and including all other incidental charges, compacting, consolidation by using vibrators, finishing, watering, curing etc complete complying with standard specifications and as directed by the departmental officers

Pointing with cement mortar 1:3 (One cement and three sand ) to full depth including finishing, watering, curing etc. complete complying with standard specifications and as directed by the departmental officers ( Flush pointing )

Hiring the Poclain 200 on hour Basis for clearing the site and removing the jungle, obstructions in the surplus course and removal of shoals in bed of channel and closing the damages in channel etc., complete complying with standard specifications and as directed by the departmental officers.

GST 18% IN FIGURES

Description of Work / Item(s)

Amount

Earthwork excavation for cut opening tank bund excavation with iniial lead of 10m and lift of 2m in hard stiff clay , stiff black cotton soil, hard red earh, shales, murams, stoney earth and earth mixed with small size boulders including refilling etc. complete complying with standard specifications and as directed by the departmental officers

Earthwork excavation for foundation in all soils inclusive of refilling the sides of foundation, shoring, strutting and bailing out water wherever necessary, well rammed, consolidated and depositing the surplus earth in places as shown by the departmental officers with an initial lead of 10 (Ten) metres and initial lift of 2 (Two) metres and clearing, leveling the site etc, complete as directed by the Engineer in charge of works and as per the technical specifications

Supplying and filling with M sand in layers of not more than 15 cm thick including watering, consolidation etc., complete complying with standard specification and as directed by the departmental officers.

Providing and placing in position of Plain Cement Concrete M 10 using M sand and hard blue granite broken stone jelly of size 40 mm mixing with mixer machine and laying including the cost of bailing/pumping out of surface water wherever necessary laying the concrete in layers of not exceeding 15 cm thick, compacting, consolidation by using vibrators, finishing, watering, curing etc. complete complying with standard specifications and as directed by the departmental officers

Supplying and erecting centring for vertical plain / RCC concrete walls of supply channel, retaining wall etc of follwing height with necessary supports, all cross bracing with mild steel size of 90 cm x 60 cm and gauge BG 10 stiffened with welded mild steel sheet angles of size 25 mm x 25 mm x 3 mm for bearing laid silver Oak / Country wood joist of size 7.50 cm x 5.0 cm spaced @ about 90 cm C / C and supported by Casurina props of 10 cm to 13 cm spaced @ 75 cm C / C, etc., complete complying with standard specifications and as directed by the departmental officers (Vertical centering)

0 m to 0.90 m Height

0 m to 1.80 m Height

0 m to 2.70 m or 3.00 m Height

Supplying and erecting centering for sides and soffits and strutting upto 3.0 m height for plane surfaces such as RCC works etc, with all cross bracing with mild steel size of 90 cm x 60 cm and gauge BG 10 stiffened with welded mild steel sheet angles of size 25 mm x 25 mm x 3 mm for bearing laid silver Oak / Country wood joist of size 10 cm x 6.5 cm spaced @ about 90 cm C / C and supported by Casurina props of 10 cm to 13 cm spaced @ 75 cm C / C, and removing the same without any damages etc., complete complying with standard specifications and as directed by the departmental officers. (Horizontal centering)

Providing and placing in position of plain cement concrete M 15 grade using M Sand and graded hard blue granite broken stone jelly of 60% 40 mm size and 40% of 20 mm size mixing with mixer machine and laying in layers including the cost of bailing / pumping wherever necessary laying the concrete in layers of not exceeding 15 cm thick, compacting, consolidation by using Vibrators, finishing, watering, curing, etc., complete complying with standard specifications and as directed by the departmental officerscomplying with standard specifications and as directed by the departmental officers

Providing and placing in position of Reinforced Cement Concrete M 20 using M Sand and hard blue granite broken stone jelly of 20 mm size mixing with mixer machine including the cost of bailing / pumping out of surface water wherever necessary laying the concrete in layers of not exceeding 15 cm thick, excluding from works centering, shutterng and steel fabrications, compacting, consolidation by using Vibrators, finishing, watering, curing, etc., complete complying with standard specifications and as directed by the departmental officers

Supplying, fabricating and placing in position of Mild Steel or Ribbed Tor Steel for all RCC works as per design & drawing given including cost of steel, binding wire and labour charges for cutting, bending, laying in position and tying with binding wire, etc. complete complying with standard specifications and as directed by the departmental officers

Providing and placing in position of plain cement concrete M 20 grade using M Sand and hard blue granite broken stone jelly of size 20 mm size mixing with mixer machine including the cost of bailing/pumping out the surface waterwherever necessary laying the concrete in layers of not exceeding 15 cm thick, ccompacting, consolidation by using vibrators, finishing, watering, curing etc

Refilling with excavated soil (other than sand) complying with standard specification for filling in foundation,bund and basement.

Fabricating, supplying and erection of Screw Gearing Steel Shutters of size above 1.00m and up to 2.00m width consist of skin plate made out of 8mm thick Mild Steel plate and horizontally stiffened with 100x50mm mild steel channel (ISMC) at an interval not more than 0.50m and vertical stiffeners made out of same section at an interval not more than 0.60m and provided with 8mm thick Mild Steel gusset plate of required size on both sides fastened with rust free bolts and nuts etc. Conveying the fabricated shutter by using lorries including loading, unloading and leading the shutter to the vent. Dismantling the eroded shutter and shuttering arrangements by using necessary gas cutting equipments. Erecting the new shutter and the shuttering arrangements in the vent in proper position by using necessary hoisting equipments. The shutter shall be painted with two coats of Anticorrosive black paint over one coat of Red oxide primer. The rate including cost of materials, consumables, labours, power charges, conveyance charges, charges for all equipments required conveying the dismantled materials to the section stores, cost of petty civil works, trial operation of shutter and warranty for 5 years etc., complete

Fabricating Supplying and fixing of shutter Groove Angle made up of 100x100x10mm Mild steel angle for required height including welding hold fast of size 40x40x6mm Mild steel angle 3nos on both sides and conveying and leading the groove angle to the vents. Fixing the angle to the grooves in proper alignment including dismantling the existing damaged groove angles, conveying and stacking at section store. The Groove angle should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, consumables, labours, charges for all fabricating and hosting equipments, conveyance, petty civil works and including all other taxes etc., complete complying with standard specifications and as directed by the departmental officers

Fabricating, supplying and fixing of 63 mm dia Screw Rod made up of Mild Steel duly machined and fully threaded to suit the Head set Assembly and provided with required holes. Conveying and leading the screw rod to the worksite. Fixing the screw rod to the shutter gusset plate with required bolt and nut in proper alignment to the head set including dismantling the existing damaged screw rod, conveying and stacking at section store. The Screw rod should be painted with two coats of Anticorrosive black paint over one coat of red oxide primer. The rate including cost of materials, labours, charges for all fabricating and hoisting equipments, conveyance, conveyance charges for labours and material and warranty for 5 years etc., complete.

Fabricating, Supplying and fixing of Top Beam made out of 200 x 100mm (ISMB 200) duly drilled to suit the Head set Assembly with required bed bolt made out of 25mm Mild Steel Round duly threaded with suitable anchorage arrangements to a height of 0.60 m with necessary Fish plate made out of 16 mm Mild Steel Plate of size 0.20 x 0.30m 2 Nos. with required holes. Conveying and leading the top beam arrangements to the work site. Fixing the top beam arrangements at the top of the vent to correct position including dismantling the existing eroded top beam, conveying and stacking at the section store. The top beam should be painted with two coat of Anticorrosive black paint over one coat of Red Oxide primer. The rate including cost of materials, labours, charges for all fabricating and hoisting equipments, cost of petty civil work, conveyance charges for labours and materials and warranty for 5 years etc complete

Fabricating, Supplying and fixing of Head Set Assembly medium duty with hexagonal nut(approximate 70 Kg) made up of cast iron including moulding, machining and the hexagonal nut threaded to suit the Screw Rod provided with thrust bearings for smooth operation. Conveying and leading the head set assembly to the work site. Fixing the head set assembly to the top beam by using required bolts and nuts in proper alignment including dismantling the existing damaged Head set assembly, conveying and stacking at section store. The Head set assembly supplied with operating key and the both should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, labours, charges for wooden pattern, moulding and charges for all machining equipments, conveyance charges for labours and materials and warranty for 5 years etc.,complete.

Supplying and fixing the Cement concrete block of size 300 mm X 250 mm X 200 mm of M 15 using hard blue granite broken stone jelly of 20 mm size mixing with mixer machine including the cost and conveyance of all materials to work site, labour charges for fixing the same in position and including all other incidental charges, compacting, consolidation by using vibrators, finishing, watering, curing etc complete complying with standard specifications and as directed by the departmental officers

Pointing with cement mortar 1:3 (One cement and three sand ) to full depth including finishing, watering, curing etc. complete complying with standard specifications and as directed by the departmental officers ( Flush pointing )

Hiring the Poclain 200 on hour Basis for clearing the site and removing the jungle, obstructions in the surplus course and removal of shoals in bed of channel and closing the damages in channel etc., complete complying with standard specifications and as directed by the departmental officers.

GST 18% IN FIGURES

Description of Work / Item(s)

Amount

Dismantling Reinforced Cement Concrete using deploying machinaries as directed by the Engineer in charge of works as per technical specifications.

Dewatering using 10 HP diesel engine pumpset including Hire charges, cost of Diesel, Engine oil, pump operator, labour charges, conveyance of pumpset and fuel to site and back, loading, unloading and any other incidental charges etc., complete.

Conveying the removal of constructional debris and other obstructions including hire cost, fuel cost etc., by using Lorry/Tipper forcomplete during the rainy season whenever necessary.complete complying with standard specifications and as directed by departmental officers.

Earth work excavation in all soils except Medium rock/hard rock requiring blasting and conveying for Formation of bund with lead 0 m to 5 Km by deploying earth moving machineries and tippers including benching formation of bunds, breaking clods, ramming, sectioning, etc. complete complying with standard specifications and as directed by the departmental officers.

GST 18% IN FIGURES

M VENKATESHBABU

M VENKATESHBABU

M VENKATESHBABU

M VENKATESHBABU

M VENKATESHBABU