Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹24.5 L
EMD Value
₹24,500
Closing Date
18 Oct 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Officer, Valavanur Town Panchayat
Valavanur Town Panchayat
Construction of Library Building at Ward.No.03 Naraiyur Pathai in Valavanur town Panchayat, Villupuram District under MLACDS 2023-24
2023_DTP_378171_1
182/2023/A1
Open Tender
Civil Works - Buildings
Works
60 days
Valavanur Town Panchayat
As per Tender Notice and Tender Rules
3 documents required · 3 mandatory
₹0
₹24,500
Valavanur Town Panchayat
9 Nov 2023
12 Oct 2023
18 Oct 2023
12 Oct 2023
18 Oct 2023
12 Oct 2023
12 Oct 2023 - 18 Oct 2023
12 Oct 2023
Amount
Earthwork excavation and depositing on bank with initial lead and lift of 10 metres and intial lift of 2 metres hard stiff block cotton hard red earthy shales muram gravel stoney earth and earth mixed with small size boulders and hard gravelly soil as per SS-20A
Collection supply and filling of Stone Dust of approved quarry including cost and Conveyance of all materials to site and all labor charges for filling etc., Complete.
Plain Cement concrete 1:4:8 (one cement five sand and ten Coarse aggregate) using 40mm hard broken granite Metal for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick well rammed and consolidated complying with standard specification.
Reinforced cement Concrete 1:1.5:3 (one cement two sand three Coarse aggregate) mix using 20mm ISS HBG metal including cost and conveyance of all materials to site and all labour charges etc., to complete as per std. specification.
Supplying and erecting steel centering including necessary supports for plane surfaces in foundation and basement for reinforced cement concrete works such as column footing, plinth beam, grade beam, stair case step, bed block etc. which require only normal strutting using M.S. sheets of size 90cm x60cm BG 10 gauge of stiffened with mild steel angles of size 25mm x 25mm x 3mm for boarding laid over silver oak joists of size 10 x 6.50cm spaced at about 90 cm centre to centre and supported by the casurina props of 10cm to 13cm dia spaced at 75cm centre to centre at suitable intervals etc. complying with standard specification. (The payment for centering shall be made only after the concrete is laid). for Column
for Plain Surface
Drainage
Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VII-3.
Brick Work in Cement Mortor 1:5 Mix (one cement, five M- Sand ) using new best country Bricks of size 8 ¾” x 4 ¼” x 2 ¾” from approved quarry including cost and conveyance of all materials to site. loading and unloading charges and labour charges for mixing, laying and curing etc. complete. complying with std. specifications.
Collection supply and filling of well gravel filling approved quarry including cost and Conveyance of all materials to site and all labour charges for filling etc., Complete.
Supply, fabricating & fixing in position of M.S door of size 0..90 x 2.10m. The outer frame will be 25 x 25 x 3mm angle, the side frame with outer bars and M.S Sheets 1.60mm thick 20gauge MS sheet with necessary hinges, tower bolt, aldrop length 30mm and hold fast etc., complete complying with standard specifications.
Supplying and fabrication and fixing in position of anodised natural colour matt fininsh sliding window in TWO track in all floors with following sizes. All the two shutters with slinging entering and made with UPVC (ultra Polyvinyl Chloride ) section for outer frames as shown below with necessary accessories such rubber beading.clips, handle and fixing 5 mm thick clear sheet glass including all required for fabrication etc., complete. Necessary dismantling making holes in RCC columns, beams, mansory wherever necessary with power drill to the extent required and made good to the original conditions after fixing as directed by the dePart ofmental officers. (All materials should be got approved by the Executive Engineer before fixing in position).
Supply, fabricating & fixing in position of M.S window outer frame will be 25 x 25 x 3mm angle, the side frame with outer bars and M.S Sheets 1.60mm thick 20gauge MS sheet with necessary hinges, tower bolt, aldrop length 30mm and hold fast etc., complete complying with standard specifications.
Plastering with cement mortar 1:3 (one cement and three sand) mix to 10mm thick including cost and conveyance of all materials to site and all labour charges etc. complete as per standard specification.
Plastering with cement mortar 1:5 (One cement and five sand) mix to 12mm thick including costand conveyance of all materials to site and all labour charges etc. complete as per standard specification.
Weathering Course with broken brick jelly 20mm size pure slacked lime over R.C.C. roof slab the preparation of 32:12.5 for required depth and slope etc. complete.
Supplying and fixing over the floors best quality of scratch ceramic tiles of 30 c.m x 30c.m x 6mm size of approved colour laying with cement mortor 1:3 mix pointing the joints with colour pigments etc. Complete.
Dadooing the walls with glazed tiles of 15 c.m x 15c.m 6mm size laid in cement mortor 1:2 mix 10mm thick and pointing with 0.40 kg white cement per m2 etc.
Paving the floor with descrgned coloured vitrified tiles of size 600 x 600 x 8mm of best quality and approved variety complying / confirming ISI specification land over cement mortar 1:3 (one cement and three M- Sand) 20mm thick and pomted with same coloured cement neatly etc., complete.
Supplying and fixing in position best Indian make Aluminium anodised TOWEL RAIL of approved quality and size 60cm long and 20mm dia with brackets of same material including fixing with necessary teak wood plugs C.P. Screws etc., complete as directed by the dePart ofmental officers.
Painting Two Coats on new Iron works with best synthetic enamel paint of approved colour and quality – 10m2.
Painting two coats with ready mixed Plastic Emulsion Paint of'approved quality and colour over a priming coat, including 'thorough scrap ping,clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required - 10 m 2
Supplying and fixing in position colour glazed EUROPEAN WATER CLOSET with 'P' or 'S' trap and double flapped seat cover, 12.50 litres capacity P.V.C. low level FLUSHING TANK including all internal fittings fixed on C.I. brackets, 12mm PVC or brass nipple, chromium plated brown headed stopcock, 12mm nylon connection with necessary teakwood plugs, clamps, screws to the portion coming with walls and floors, including dismantling masonry and redoing the same to the original condition.
Wiring with 2x 1.5 sqmm (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitablePVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point (SD 16)
Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting. (SD88)
Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x l00 x 113 mm TW switch box for 5 A 3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire. for open PVC plug point. (SD 36)
Wiring with 2x 1.5 sqmm (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitablePVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC Fan point (For Electronic regulator) (SD 16)
Supply and fixing of 1200 mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator, with 1 metre down rod with fan clamp with side plates and cross arm of size 450 mm (18") (SD 106)
Supply and fixing of 6 way SP DB of 16 A / way with 16 A DPIC switch of 500 V with F & N (Front Handle) on suitable angle iron frame work with trunking box MS cable entry box with earth connection only (SD 154)
Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains (SD 65)
Supply and delivery and fixing of HDPE tankas per IS 12701 / 1996 including loading,unloading, transportation and labour charges for fixing of the GI pipes andspecials for pipe connection works including cutting, threading and fixing charges etc.,
Providing Geological Survey Part 150mm Dia Vertical Bore Well From Approve Institution Includig all Cost And Convince and all labour charges etc.complete
Drilling of Bore well anywherw india in Tamilnadu including transport ation from one place to another with tamilnadu in alluvival soil sedimentary starta of clay and sand stone shall be pebbls moulders etc.,by first taking a polot bore of140mm/150mm dia and then enlarging required dia direct or reverse rotary mud circulation method using clay rings fuel, labour and drilling bentonite and water required for drilling are site (Site will be shown by the TWAD board officer )including construction of mud pit
Remaing of 150mm dia pilot bore to 300mm dia bore as direct by the TWDA Board officers including all other incidential charges
Supply and delivery of 150mm PVC casing pipe without slotted including cost and conveyance of all materials to site etc.,Complete
Supply and delivery of 150mm PVC casing pipe with slotted including cost and conveyance of all materials to site etc.,Complete
Labour charges for in inserting 150mm Dia PVC Casing pipes assembles (with slots or without slots)in the drilled hole including jointing the pipes with pipes with PVC couples cement with pastes etc., Complete supply and packing the annular space with pebbles of size and quality as approved by the execution Engineering of TWAD Board
Provision of Developing the borewell with air Compress of 300 cm Capacity (Minimum 8 hours)including transporting,labour and fuel charges for compress as directed by town panchayat Engineering and conducting yield test by 'V'notch method
Supply and fixing of Cuddapah Slab including cost and conveyance of all materials to site and all labour charges etc.,
Supply and fixing of 16 Amps DP Switch metal clad of 500 V with fuse and neutral (Side Handle) on suitable TW Box PWD Earthing
Supply and Delivery of 2.00 HP wet type submersible pump set 20lpmX25m head, confirming to IS 8034/89 with ISI marking along with 2.5 sq mm. cable (to 5m lengh) suitable for installation in 150 mm dia bore including Transportation charges etc., complete
Supply and delivery of 2.00 HP panel board suitable for above pump set with all accessories as per IE rules with Is specifation ect., complete
Supply anddelivery of 63mm HDPE hose including cost and conveyance of all materials to site and all labour charges etc.,
Supply and delivery of 2.50 sqmm Copper Cable including cost and conveyance of all materials to site and all labour charges etc.,
Labour charges for erection of 2 HP Submersible motor including cost of all charges etc, complete
Plain Cement Concrete 1:2:4 Mix (one Part of cement, two Part of M- Sand and four Part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.
ANBARASU
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_450690.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .