SPECIAL REPAIRS TO ROAD NETWORK IN CHC COMPLEX, ROAD FROM MDC TO OHT BACK SIDE ARMT WING AND ROADS AT QUEENS LINE AT AHMEDNAGAR UNDER GE(N) AHMEDNAGAR

Amount

Repairs to pot holes any depth, not exceeding 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc. cutting around edges to at least 25 mm in depth, making good by filling in screened and graded road metal watering and well ramming (incl supply of metal) and making good by applying tack coat @ 5 kg per 10 Sqm of paving bitumen,VG-10 putting in premixe as specifide for thin bituminous carpet (2 cm thick), well rammed and sealed with seal coat (6.8 kg of binderwith 0.06 cum of sand) and again well rammed (including supply of premixed binder and sand), depth of pot holes not exceeding 30mm complete all as specified & directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area n'exc 400 sqm, exc 50mm and n exc 100 mm deep complete all as specified and as directed.

M&L for 7.5cm thick Granite trap of Basalt (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient materials and camber required.

M &L preparing unsurfaced WBM surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally cleaning the surfaces with mechanical compressor to remove all loose dirt etc and applying evenly priming / tack coat with bituminous primer (paving VG - 10 grade bitumen) @ 10 Kg per 10 Sqm complete all as specified & directed.

M&L Premix bituminous macadam laid and rolled and compected to required gradient and camber with 8 to 10 MT power roller (consolidated thickness 75mm or less) using 4% binder content by weight of total mix

M &L preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally cleaning the surfaces with mechanical compressor to remove all loose dirt etc and applying evenly priming / tack coat with bituminous primer (paving VG - 10 grade bitumen) @ 5 Kg per 10 Sqm complete all as specified & directed.

M& L for premixed bituminous semi-dense asphaltic concrete 30 mm consolidated thickeness with max 5.5% binder content, paving butimen VG - 30 grade by weight of total mix, rolled and compacted to required camber and gradient using 8 to 10 tonne power roller complete all specified & directed.

M& L for premixed bituminous semi-dense asphaltic concrete 25 mm consolidated thickeness with max 5.5% binder content, paving butimen VG - 30 grade by weight of total mix, rolled and compacted to required camber and gradient using 8 to 10 tonne power roller complete all specified & directed.

M&L Moorum/red bajri for side berms Spreading and leveling in layers n.exc 15cm thick well ramming including watering and consolidation with power roller all as specified.(Spread thickness 100mm )

M&L for painting lines, dashes, arrows,letters etc on roads, pavements etc 10cm wide with 2mm thick reflective marking strip of colour and shape as directed using hot thermoplastic materials, using fully/semi automatic application machine fitted with shoe heater including preparation of previously treated surfaces, cleaning of all dirt, scales, grease and foriegn material etc all as specified and directed

S&F in repairs cat eyes / road studs of size 100 X100 X 25 mm of tough ABS material, white / yellow colour body, reflective pannel of red / any other colour as approved fixed with suitable size studs as per manufacturers instruction and as directed after taking down/out existing at site complete all as specified and as directed . ( Model C-80 with prismatic micro reflectors of M/S 3M or equivalent in M/s Automat,M/s Siddhi vinayak Enterprises,M/s Road safety marks complete.

S&F in repairs mild steel delineator SVD-3 1200 mm long, 76.1mm outer dia light grade MS pipe(3.25mm thick), with HIP grade retro reflective tape 76.1mm around, three strips 50mm width blue, white, red or any other colour with MS jalli/mesh 2mm dia aperture 25mmx25mm in pipe shape as guard bar, (mesh having size c/c dia 120mm, Ht250mm) mounted on 1.25mm thick MS circularplain sheet and top closed with same sheet and fixed in PCC 1:3:6 type C1 using 20mm graded stone aggregate of size 300mm x 300mm x 300mm including necessary excavation in post hole not exc 0.50 cum each in any type of soil returning and filling in removal of suplus spoil and applying two coats of synthetic enamelled paint over primer on steel surfaces complete all as specified and as directed vby Engineer-in-Charge. (Make:- M/s Dark Eye/ M/s automat/ M/s Siddhi vinayak/ M/s Road safety marks.

Supply and fixing speed breaker 75mm high, made of sturdy plastic and having high resistance to severe impact and brutal weather conditions available in black/ yellow permanent colour including fixing in alternative colour as per manufacturrer's instructions with suitable size nails & approved adhesive MAKE : HARSHIT ENFGINEER OR EQUIVALENT IN RADHA ROAD MAINT PVT LTD, AUTOMAT/ SIDDHI VINAYAK ENTERPRISES, ROAD SAFETY MARKS, SPARKLE OF TATA BP SOLAR INDIA .

Sameer S Shaikh

M/s. A P INFRA