ADDITION/ALTERATION AND SPECIAL REPAIR IN SQUASH COURT AT ICGAS DAMAN

Amount

Dismantling existing wooden flooring for Squash Court complete all as spec ified and as directed by the Engr-in-charge.

M&L for providing wooden flooring for Squash court conforming to the requirement of MFMA (Maple Flooring Manufacturers Association), having performance standard DIN 18032, Part 2 also conforming to the standards specified by WSF (Word Squash Federation). Using MFMA grade marked maple wood planks finished with 21mm thick, 57 to 83 mm wide and in random length in tongue and groove shape. The edge of the board will have a finger lock groove and the bottom side air pass groove and treated with special anti-termite treatment and water-resistant lacquer including anti termite treatment for existing floor including the following: - (a) The bottom of wooden floor shall drum machine sanded and provided with air pass groove & top shall be finished with lacquer finish using water based imported bona Tec, Non-skid polyurethane of approved make. (b) The floor shall be placed on wooden frame work of approved quality wood (Fir/spruce/pine) runners of size 70mm x 45 mm placed at 300mm c/c (at perpendicular length to the top floor) applied with anti-termite solution. The runners shall be provided with 18mm thick cushioning pads (conforming to the industry standards) at 300mm c/c duly stappled to the runners, The runners shall be placed on a vapour barrier of 600 Microns thickness on existing levelled PCC floor. (c) After installation, the floor shall be machine sanded in uniform level and finished with imported non skid polyurethane lacquer. Before plying the finish coat, the game lines shall be marked in specified colours using polyurethane enamel paints and to the WSF standards. Note: The rate quoted shall include for carrying out post construction anti termite treatment all around the edges of wall both internally & externally, to ensure that sports flooring is immune to termite attack.

M& L for Squash Court Bounce Wall 15-17 mm Hard Plaster system as per international standard in two layer of cement and sand with 10-12mm base coat and 5mm thick top coat complete all specified as directed by the Engr-in-charge.

M&L for applying APEX Ultima paint in squash court wall of coloure Red & white or as per requirement complete all as specified and directed by the Engr-in-Charge.

Hacking out old glass ( any thickness size quality or description) from squash court as fixed complete as specified and directed by the Engr-in-Charge.

S&F free standing glass back wall (as per international standards) made of 12mm thick toughened glass with 4 panels, 1 door, 4 fines, fixtures and fittings and all the materials required for erecting the glass walls. Note :The height of the glass wall will be 2130 mm above the finished floor level complete as specified and directed by the Engr-in-Charge.

Dismantling boarding, any description, fixed in any position with screws complete as specified and directed by the Engr-in-Charge.

S & F Squash court Sound Board as per WSF complete as specified and directed by the Engr-in-Charge.

Providing & applying RED color PU paint on wall surface & wooden flooring surface complete as specified and directed by the Engr-in-Charge.

Taking down cement plaster on brick masonry walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water and removal of debries out side from MD land etc complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 internal plaster on brick/concrete surfaces finished even and smooth without using extra cement etc complete all as specified and directed.

M&L for rendering in CM 1:4, 20 mm thick in two coats (15 mm under coat + 5mm finishing coat) on brick/concrete surfaces with 3% water proofing compound in finishing coat and finishing the surface even and fair complete all as specified and directed. (Note :- WPC will be measured and paid seperately).

Supply only integral WPC all as specified & directed.

M&L for preparation of newly plastered surfaces of wall and applying one coat of wall primer to the surfaces over 1.5mm thick wall care putty and finally applying two coats of plastic emulsion paint, complete all as specified and as directed.

M&L for preparation on new plastered surface of wall, chajja, parapet etc and finishing walls with Acrylic Smooth exterior paint of required shade over 3mm wall careputty: New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.

M&L for preparation of old decorated plastered surfaces of walls, chajjas, parapets by removing all dirt and loose materials,filling with crack sealing compound of approved make followed by 3mm thick wall care putty and applying one coat of acrylic exterior paint over a coat of exterior grade primer (Brand Apcolite apex manufactured by Asian paint or equivalent) as per manufacturer's instructions and removing the loose materials and filled with crack filling compound of approved make if necessary including scaffolding etc complete all as specified and directed.

M&L for complete removal of existing treatment , preparation of surfaces including filling of the holes/cracks on walls with plaster putty and applying two coats of plastic emulsion paint on walls over a coat of primer over 1.5mm thick wall care putty etc complete all as specified and as directed.

M&L for preparation of old decorated surfaces and applying one coat of white wash on ceilings complete all as specified and as directed.

Taking down Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) etc complete all as specified and as directed.

Taking down door/ window shutter with frame without taking off shutters from frame of any description exc. 1.50 Sqm not exc 4.00 Sqm each etc complete all as specified and as direted.

M&L mild steel of gde Fe 410-0 as in hold fast fixed to steel/wood door/widow frames including tarring and sanding etc complete all as specified and as direted .

S&F 2nd class hard wood (SAL) plain, solid, straight chowkats and frames, wrought framed, rebated on the solid,single or double rebate rounded or chamfered, put together with glue pinned at joints etc complete all as specified and as direted.

S&F 30mm thick Flush shutters,solid core construction,with block board core and plywood face panels, one face is with decorative face veneer with liping frame commercial type on both sides etc complete all as specified and as directed .

S & F Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge.

Supply and fixing to existing/new door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge.

S&F 100 mm long butt hinges, stainless steel, medium weight fixed with stainless steel screws and galvanised mild steel hinge pins complete, all as specified and directed.

S&F 75mm long butt hinges, stainless steel, medium weight fixed with stainless steel screws and galvanised mild steel hinge pins complete, all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 200 mm long fixed in any position etc complete all as specified and as directed.

S&F aluminium anodised barrel tower bolt of extruded section 100 mm long fixed in any position etc complete all as specified and as direted.

S&F extruded aluminium alloy handle fabricated type anodised 150 mm long fixed in any position etc complete all as specified and as directed .

Supply and fix 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding of extruded sections or cast aluminium alloy etc complete all as specified and as directed .

S&F aluminium alloy body and tongue, anodised Floor door stopper 150 mm long with hard drawn spring fixed in any position etc complete all as specified and as directed .

S & F 100 mm size aluminium anodised hasp & staples fixed with screws etc complete all as specified and as directed by EIC.

M&L for standard aluminium section "heavy grade" powder coated of approved colour as in sliding windows, Ventillators, partitions and doors frames, shutters of required sizes including, rubber gasket, PVC wheel with ball bearing, concealed type lock and fixing of glass complete all as specified and directed. Make of aluminium section - ''Jindal/ Indalco/ Hindalco. (Note: (i) The measurement shall be recorded weight of aluminium section only and rate quoted shall deemed inclusive of rubber gasket, rubber beading, PVC wheel with ball bearing, concealed type locks, handle etc (ii) Glass shall be measured and paid separately as supply only.

S&F4.80 mm thick float glass fixed in aluminium sliding window shutters etc complete all sas specified and directed.

S&F Solar controlled film 50 micron reflective type sticked to glass as per instructions of manufacturers all specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed.

S&F 4.00 thick frosted glass fixed in ventilators etc in required sized, complete all as specified and as directed

M&L for preparation of new wood surfaces of any description exc 10cm width or girth and applying two coats of synthethic enamel paint over a coat of pink primer etc complete all as specified and as directed.

S&F aluminium anodised XPM grill aluminium alloy DG 202 grill 4.8 mm thick (in the shape of expanded metal of aluminium XPM jalli) opening size 59mm (length expansion) and 45 mm (width expansion) fixed in and including E/H frame all as per manufacturers instruction and as directed.

Supply and fix 12 mm thick toughened glass in door shutters including cutting, edging, making holes complete in all aspect and as specified and directed by Engineer-in- Charge

Supply and fix stainless steel bottom rails (Size 100 mm x 32 mm) in toughened glass doors including AGILE Aluminum profile brush seal, including cutting, edging, making holes, screws etc complete in all aspect and as directed by Engineer-in-Charge.

Supply and fix stainless steel top rails (Size 100mm * 32 mm) in toughened glass doors including cutting, edging, making holes, screws etc complete in all aspect and as directed by Engineer-in-Charge

Supply and fix centre lock with strike box (Size 186 * 100 mm) in toughened glass door including cutting, making holes and screws etc complete in all aspect and as directed by Engineer-in-Charge

Supply and fix aluminum top insert size 75 * 22 mm along with top strap (110 * 20mm) including drilling, screwing etc complete in all aspect and as directed by Engineer-in- Charge.

Supply and fix floor spring including bottom insert ( 75 * 22 mm) and bottom strap (112 * 26 / 21 * mm) including drilling, cutting of floor, and accessories screw etc complete in all aspect and as directed by Engineer-in-Charge.

Supply and fix stainless steel pair of handle bars fixed (1240 mm) in toughened glass including making holes etc complete in all aspect and as directed by Engineer-in- Charge.

S & F in repairs 20 mm dia Aluminium Powder coated curtain rods cut to lengths as required and fixed including brackets as directed etc complete.

Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing),removing serviceable tiles to store and rubbish off the premises.

S&F for non skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tiles exceeding 0.18sqm but not exceeding 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured to match coloured tiles over 20 mm screed bedding in cement mortar 1:4 complete all as specified and directed.

S&F for glazed ceramic coloured tiles 600x1200x7mm thick on vertical surfaces such as skirting / dados set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick rendering in CM (1:4) as in backing coat complete all as specified and directed.

S&F for vitrified coloured tiles of 9-10 mm thick (square / rectangular) area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, as in floor etc set and jointed in neat cement slurry and pointed in white or coloured to match coloured tiles over 15 mm screed bedding in cement mortar 1:4 complete all as specified and directed.

All as per item above but on vertical surfaces such as skirting / dados including 15 mm thick rendering in CM (1:4) as in backing coat complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. and removal of debris out side from MD land etc complete all as specified and directed.

M & L for 18-20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite.

M&L for rounding to edges of stone slabs one edge, such as in steps,columns, cooking platform,window cills and other similar situations.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on brick walls complete all as specified and as directed .

Taking up or down steel tubing/PVC pipe and connections, including cleaning of serviceable pipe for reuse and removal of unserviceable tube from work site all as directed.

Supplying and laying 20mm dia of Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipes complete all as specified.

Taking up or down 25 mm bore dia Steel Tubing and connecions fixed to walls or laid in floors/ trenches etc complete all as specified and directed.

S&F 25mm dia bore medium grade galvanised steel tubing with all fittings concealed on walls, ceilings or laid under floors complete all as specified and directed.

Taking out existing unserviceable gate valves and supply and fix gun metal gate valve 25 mm dia with iron wheel head screwed both ends for iron pipes/fitting including necessary fittings like GI Tee,nipple etc complete all as specified and directed.

Disamantling of cast iron/PVC pipes of any description with fittings fixed to walls or laid in floors/trenches.

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls with fastners complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls with fastners complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm dia

S&F PVC (SWR) vent cowl 110mm dia

S&F PVC (SWR) bends any radius 75mm dia with access door

S&F PVC (SWR) bends any radius 110mm dia but with access door

S & F 75mm thick PVC (SWR) floor trap, plain with grating including jointing with solvent cement

S&F in repair Bowl for Floor mounted coupled WC Size 365x630x750 mm with UF soft close slim seat cover, Hinges, Fixing Accessories and Accessories Set, P/S Trap alongwith Cistern with cistern fittings (Make : Jaquar Cat No FNS-WHT-40751S220UFSM or equivalent)

S&F in repair urinal half stall type size 355x340x535mm white, with and including Urinal Valve Auto Closing System with Built-in Control Cock & Wall Flange, brass chromium plated flush pin, 40mm dia brass CP waste coupling with all other necessary fittings etc complete all as specified and directed. (Make : Jaquar Cat No URS-WHT-13261 or equivalent and PRS-077 or equivalent)

S&F in repairs Health Faucet with 1.2 meter CP flexible tube & hook and all necessary fittings all as specified and directed. (Make: Jaquar Cat No 573 or equvialent)

S&F in repair counter top wash basin including making good wall or floor fitting to match existing surface complete all as specified and directed. (Make : Jaquar Cat No 35935 or equivalent)

S & F in repair 40mm dia brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed by Engr-in-Charge

S&F in repair chromium plated fancy type bib tap 15mm complete at any position etc complete all as specified and as directed.

Supply & fix in pillar tap with 200mm long extension body cast copper alloy with capstan head, fancy type, chromium plated screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe & fixed, complete 15 mm dia suitable for WHB complete all as specified and directed by Engr-in-Charge. (Make : Jaquar Cat No 10001 or equivalent)

S&F in repairs 15mm size Stop Valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends etc complete all as specified and as directed . (Make : Jaquar Cat No 10053 or equivalent)

S&F in repair chromium plated fancy type 2 way bib tap 15mm complete at any position etc complete all as specified and as directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and directed.(Make: Prayag)

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.(Make: Prayag)

S&F in repairs brass chromium plated shower rose 125mm size with or without swivel joints any size and shower arm including fixing to steel pipe or union 15mm bore complete all specified and directed.

S&F in repair glass shelf 500x125x60mm (with ABS brackets) etc complete all as specified and as directed.(Make: Prayag)

S&F in repair tubular towel rail, 20mm dia, D type, 60cm long between flangesfixed with and including chromium plated brass screwes and wooden/plastic cleats complete all as specified and directed.

S & F in repair stainless steel soap dish fixed to walls including chromium plated brass screwes complete all as specified and directed.

S&F in repair standard quality stainless steel toilet paper holder complete all as specified. (Cat No Jaquar ACN-1153S or equivalent)

S&F in repair towel ring of long PTMT fixed with and including chromium plated brass screwes and wooden/plastic cleats (minimum weight 90gms) complete all as specified and directed.

S&F in repair white colour PVC drain pipe long socket waste pipe for wash basin / kitchen sink water outlet complete all as specified and directed.

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamal paint over a coat of red oxide primer.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S & F Collapsible steel gates, top hung,consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete

Supply and Application of 5 Layer SHR Waterproofing Coating System as per manufacturer application procedure on leaking concrete roof surface by thorough surface preparation with high pressure water jet, having a pressure of min. 125 bars, followed by (a) Opening the cracks, and application of one absorption coat of nano-tech enhanced elastomeric waterproofing (NEEWP) emulsion having UV resistance having min. 50% solids, filling and sealing the cracks, (b) Over coating with 2 Coats of NEEWP + Cement mixture as waterproofing coat having +450% Elongation followed by curing. (The surface is then to be tested for water tightness with ponding test for min. 2 days) (c) Top-coated with 2 Coats of SHR Coating - pure acrylic based, UV resistant, non-yellowing, bio-organism resistant (anti-fungal, anti-bacterial) confoRming to BIS STD IS 17218:2019 with Pull off Adhesion 2.8 Mpa The material must have passed 2000 hrs accelerated durability test, suitable for all types of cementitious surfaces, white colour, matty finishing, Thickness shall not be less than 120 microns using brush, roller, airless spray gun as applicable. The product should be certified by NABL Approved Lab and application is to be done by company approved applicator only

Dismantling stone sett / interlocking paver tiles of any description or thickness laid dry or laid dry and pointed.

Demolition of plain cement concrete and pavings (unreinforced) in any position (below or above ground level) n exc 15 cm thick and removal of the same outside MD land etc complete all as specified and directed.

M&L 100 mm thick cement concrete type C-2, 1:3:6 using 40 mm graded stone aggregate as sub base.

M&L for 50mm thick Sand filling under floors or in foundations including watering and consolidation all as directed.

M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-35 Grade with grey cement and pigment all as directed.

M&L for cement concrete as in road kerbs or copings and the like of Type B1, 1:2:4 (using 20mm graded stone aggregate) round or chamfered on edge including necessary use and waste of formwork.

Removing of old unserviceable water storage PVC tank of any type after disconnecting of existing pipe line, ball valve, air pipe etc and supply and fix rotational moulded polyethylene water storage tank 1000 ltr capacity (cylindrical vertical with closed top) of three layer hoisted and fixed in position at any height including reconnetcing of pipe, ball valve, air pipe etc and testing complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out soft loose soil returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removal of surplus soil as directed.

M&L Cement concrete Type C-2 1:4:8 (40mm graded aggregate )in foundations, filling and mass concrete

S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 including necessary welding & bending and design approved by accepting officer complete all as specified and as directed by Engr-in-Charge

M&L Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde- E- 250) quality-A

S&F PVC modular tensile structure upto 1mm thick of any colour (approved by accepting officer) having tear strength 520N as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamal paint over a coat of red oxide primer.

Material and labour for point wiring in repairs complete with 1.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, concealed wiring multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC conduit size not less than 25 mm dia medium grade such as Tee ,Corner, overlaping connector etc.along the concealed in walls/roofs/ ceilings/floors etc including concealed PVC box for fixing of and including modular plate as per no of switch modules flush mounted suitable for fixing modular switches , sockets,fan regulators etc. including modular plate cover of required size with necessary stainless steel cadmium plated screws and including 1.5 Sqmm PVC insulated, multistranded, FRLS type,unsheathed (Green colour),single core, copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed for One light point / fan point controlled by one 6 Amp switch.

Material and labour for point wiring in repairs complete with 1.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, concealed wiring multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC conduit size not less than 25 mm dia medium grade such as Tee ,Corner, overlaping connector etc.along the concealed in walls/roofs/ ceilings/floors etc including concealed PVC box for fixing of and including modular plate as per no of switch modules flush mounted suitable for fixing modular switches , sockets,fan regulators etc. including modular plate cover of required size with necessary stainless steel cadmium plated screws and including 1.5 Sqmm PVC insulated, multistranded, FRLS type,unsheathed (Green colour),single core, copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed for One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .

Material and labour for point wiring in repairs complete with 2.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, concealed wiring multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC conduit size not less than 25 mm dia medium grade such as Tee ,Corner, overlaping connector etc.along the concealed in walls/roofs/ ceilings/floors etc including concealed PVC box for fixing of and including modular plate as per no of switch modules flush mounted suitable for fixing modular switches , sockets,fan regulators etc. including modular plate cover of required size with necessary stainless steel cadmium plated screws and including 2.5 Sqmm PVC insulated, multistranded, FRLS type,unsheathed (Green colour),single core, copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed for One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on independent board.

Supply & fixing modular type switch 6 Amps ,1way,1 module.

Supply & fixing modular type switch 16 Amps ,1way,1 module .

Supply & fixing modular type socket 6 Amps, 2/3 Pin combined 2 module .

Supply & fixing modular type socket 6 A/16 Amps, 6 Pin combined 2 module.

Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body

Supply &fix modular type fan regulator stepped type 120 W- 2 module.

Supply and fixing in repairs , LED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fix in repairs, LED tube light along with fixture,10 watts complete all as specified.

Supply and fixing, in repairs, LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.

Supply and fix in repair, factory made, sheet metal enclosure, 4 way double door, 415 volts, AC,TPN, vertical distribution board, painted with epoxy based powder coated suitable for mounting MCCB as incomer of rating upto 160Amps, FP, 16-36 KA and MCB SP /TP as outgoings and complete with and including 200 amps rated copper busbar, neutral bar, earth bar, connecting cable links with and including top and bottom removable gland plate, complete with IP 43 protection, all as specified and as directed.

Supply & fix for MCB SP 16 Amps 10 KA,"C" series complete all as specified and directed.

Supply & fix for MCB SP 20 Amps 10 KA,"C" series complete all as specified and directed.

Supply & fix for MCB SP 32 Amps 10 KA,"C" series complete all as specified and directed.

Supply & fix MCCB FP 100 Amps, 415 V, 50 Hz, with Magnetic Adjustable** – 5 to 10In Breaking Capacity – 16kA Option for In built or add on module for Earth Leakage Protection complete all as specified and as directed.

Material and labour for submain wiring along with earth wire using 2 X 6.0 sq mm(colour coading) + 1X4 sq mm earth wire(green colour) of single core PVC insulated multistranded copper conductor 1100 Volts grade FRLS type in and including suitable size PVC conduit, concealed in walls/roofs/ ceilings/floors etc complete all as specified Note: Two run of 6.0 sqmm cable and one run of 4.0 sqmm cable and one run of conduit concealed in walls/roofs/ ceilings/floors etc will be measured as one unit.

Material and labour for submain wiring along with earth wire using 2 X 4.0 sq mm(colour coading) + 1X2.5 sq mm earth wire(green colour) of single core PVC insulated multistranded copper conductor 1100 Volts grade FRLS type in and including suitabe size of PVC conduit, concealed in walls/roofs/ ceilings/floors etc complete all as specified Note: Two run of 6.0 sqmm cable and one run of 4.0 sqmm cable and one run of conduit concealed in walls/roofs/ ceilings/floors etc will be measured as one unit.

Supply laying and testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of size 35 sq mm 4 core complete all as specified.

Taking down ceiling/Exhaust fan/wall fans,from its position and shall be deposited in MES store yard .

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 380m sweep with, blades, and frame and louvers complete all as specified.

Supply and fix air circulator fans 230 volts single phase oscilating 600 mm sweep suitable for wall mounting.

Cutting the existing surface of wall on brick/stone masonary for making round hole at any heightsuitable for fixing 380/300 mm sweep exhaust fan and making good the distrubed surfaceand matching with existing surface complete all as specified and directed.

Supply and fixing LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete with and incuding bracket made out of 32mm dia GI tube medium grade duly bended to required shape with and including clamp for fixing on wall complete all as specified.

Material and labour for earthing complete with galvanized iron earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m deep below normal ground connected to galvanized steel strip 25 x 4 mm size by means of bolts, nuts, check nuts and washer of galvanized steel, watering pipe of 20 mm bore, galvanised iron, light grade and 40 mm bore galvanised iron light grade for earth strip protection including all excavation earth work in any type of soil, PCC pit in PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) and RCC 1:2:4, type B1 (using 20 mm graded stone aggregate) for precast chamber cover 50 mm thick, reinforced with welded steel wire fabric or XPM Jali (weight not less than 4.00 Kg / sqm), with charcoal, salt, funnel complete all as shown in the electrical plate No 3 of SSR part –I and testing of earthing on completion complete all as specified & directed. Note:- Quoted rates shall be deemed to include for earth strip with protection pipe up to 7.5 M length.

Cutting of bituminous road, PCC surface/floor by using mechanical method or any type carefully without damaging to adjacent area complete all as specified and directed.

Material & labour for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in for mass concrete and foundations complete all as specified and directed.

Supply and lay GI tubes medium grade of size 40 mm dia in any lengths with all GI fittings laid in trenches/on walls/ through ducts/road crossings etc. for protection of UG cables with proper sealing of pipe ends complete all as specified and directed

Supply and install testing and commissioning of split type air conditioner 2 TR capacity of inverter technology 5 star rating with cordless remote control, single phase, 240 volts complete with all accessories such as indoor and outdoor units and refrigerant tubing of adequate length as required at site, indoor mounting plate, duly powder coated fixingwith anchor bolts at any height,drain pipe of suitable size brought to ground level from any height, intial filling of refrigerant gas inculding making round hole on existing wall for taking up refrigerant tubing, drain pipe,cables etc and making good the disturbed surface by matching with existing adjoining surface complete all as specified and directed Make :- VOLTAS/BLUESTAR/LG/GODREJ/Daikin . Note:- AC's to be installed at any height and locations.

Supply and fix Voltage stabilizer for automatic operation,single phase naturally air cooled indoor type ,Wall mounted type & designed for input variation between 130 V to 300 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 3800 VA suitable for 2 Ton AC . . Make- V Guard VGB 500 or equivalent in Microtek or Sinetrac.

Supply and fix of metal clad plug and socket with MCB SP 32 Amps, 10 KA 'B' series, 415 V complete all as speified and directed.

Supply and fix factory fabricated mild steel stand suitable for installation of out door unit of split type air conditioner fixing arrangement with anchoring bolts on wall surface at suitable height as per site condition.

Material and labour for submain wiring along with earth wire using 2 X 6.0 sq mm(colour coading) + 1X 06 sq mm earth wire(green colour) of single core PVC insulated multistranded copper conductor 1100 Volts grade FRLSH type in and including concealed in walls/roofs/ ceilings/floors etc complete all as specified Note: Two run of 6.0 sqmm cable and one run of 6.0 sqmm cable and one run of concealed in walls/roofs/ ceilings/floors etc will be measured as one unit.

M/s Himanshu Tyagi (BID ID -3255078)

BIHARI AND BROTHERS ASSOCIATES (BID ID -3255116)

KML CONSTRUCTION (BID ID -3254580)

Nitesh Enterprise (BID ID -3252964)

M/S KAUSHIK CONSTRUCTION (BID ID -3254682)

SHRI SIDHI VINAYAK ENTERPRISES (BID ID -3254627)

Anjali Constructions (BID ID -3254554)

Nilesh Construction (BID ID -3253423)