Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹63.8 LAccepted-AOC 5 A LANE 1 GREATER KAILASH JAMMU J K 180011 | JAMMU | JAMMU AND KASHMIR | 180011 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹65.6 L+₹1.8 L (2.84%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹66.9 L+₹3.2 L (4.95%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹67.7 L+₹4.0 L (6.24%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹80.9 L+₹17.1 L (26.9%)Rejected-Finance H NO 352 SECTOR 1 CHANNI HIMMAT JAMMU J K 180015 | JAMMU | JAMMU AND KASHMIR | 180015 | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹70 L
EMD Value
₹1.3 L
Closing Date
9 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col S Pradeep, CWE
Military Engineers Services, HQ Commander Works Eng
COMPREHENSHIVE REPAIRS TO P-21 OF TAWI COMPLEX AT SATWARI GARRISON UNDER GE SATWARI
2024_MES_637227_1
CWEJP-61/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE Satwari
Please refer tender documents
9 documents required · 9 mandatory
₹1,000
Yes
GE Satwari
₹1.3 L
Yes
2 Mar 2024
12 Jan 2024
12 Feb 2024
12 Jan 2024
9 Feb 2024
26 Jan 2024
Amount
Taking down chowkats or frames not exceeding 1.5 Sqmm each with shutter (without taking off shutter from the frame) removing from site complete all as specified and directed by Engineer-in-Charge.
Taking down chowkats or frames exceeding 1.5 Sqmm but not exceeding 4 Sqmm each with shutter (without taking off shutter from the frame) removing from site complete all as specified and directed by Engineer-in-Charge.
Taking down and refixing in same opening chowkats or frames with shutter (without taking off shutter from the frame) n.exc 1.5 Sqmm each including cutting holes for taking out hold fast or dismantling brick work and removing from site completed all as specified & directed
Taking down shutters of any description exc 1.00 Sqmm and n.exc. 2.00 Sqmm each and removing/refixing in same opening completed all as specified & directed
Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer - in - Charge.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premisescompleted all as specified & directed
Roughening surfaces of old concrete floor or old plastered skirting by picking, sweeping clean and washing down with water to remove dust etc and brushing surface with neat cement slurry with 3.0 kg of cement per sq. metre, removing serviceable tiles to store and rubbish off the Cantt area complete all as specified and directed.
Demolition of Concrete is ground floors and pavings n exc 15 cm thickness (below or above ground level)complete all as specified and directed by Engineer-in-Charge.
Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge.
Demolition of reinfocement cement concrete of any description and in any position complete all as specified and directed by Engineer-in-Charge.
Treating the top surface of filled earth and plinth protection at the rate of 5 liters of emulsion per square metre of surface area completed all as specified and directed.
25 mm thick PCC 1:2:4 type B0, using 12.5mm graded crushed stone aggregate as in screed below floor tiles complete all as specified and directed.
Vitrified Ceramic double charged edge cut joint free coloured or printed any shade tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqmm, in floors etc. including 15 mm thick screed bed in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured tiles complete all as specified and directed.
Vitrified Ceramic double charged edge cut joint free coloured or printed any shade tiles 8 to 10 mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.36 Sqmm,as in vertical surfaces such as skirting or dad set and jointed in neat cement slurry and pointed in white or coloured tiles incl 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
9 to 10 mm thick glazed coloured ceramic tiles ( square/ rectangular) with border , area of each tile exceeding 0.11 Sqmm but not exceeding 0.18 Sqmm, as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles incl 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
Machine cut kota stone slab flooring 18-20 mm thick and size exc 0.16 sqm jointed with grey cement slurry mixed with pigment to match the shade of the slab including 20 mm thick screed bed in cement mortar 1:6 and rubbing and treating the surface incl complete complete all as specified and directed
18-20 mm thick Machine cut kota stone slab as in riser and steps, skirting in full length of stair with in single peice without joint, with groove cutting in double laid over cement screed and jointed with rubbing and treating the surface incl bull nosing incl 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
18-20 mm thick Granite of any colour (table rubbed and polished) as in windows cill & cooking platforms and like fixed in cement mortar (1:4) including form work , pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as spd as directed
75mm thick PCC 1:3:6 , type C-2 using 40 mm graded crushed stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed .
100 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base floor / pavings complete all as specified and directed
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completeas directed edges joint filling with in cement mortar 1:4 complete including excavavtion for kerb stone complete all as specified and directed.
Reinforced cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) (nominal mix) as in slabs supported on wall,landing, balconies, shelves ,Lintel beam and Stair case etc. including bonding agent , complete all as specified (reinforcement to be measured & paid under respective items).
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
Form work to sides and soffits of floor or roof beam, beam haunchings, girders bressume, lintles, contilevers, shelves including support over lungs etc also splays between floor and beams complete all as specified and directed.
Work to edges of concrete flats, treads, breaks in floors from window cill, concrete railing opening in conc wall , floor and roof n.exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n.exc 20cm wide for rough finished surfaces of concrete, complete all as specified and directed.
TMT bars, 6 mm to 8 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified and directed.
TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified and directed.
Brick work with fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in cement mortar (1:6) complete all as spd as directed
Brick work with fly ash bricks having crushing strngth not less than 75kg/sqcm, straight or curved in half bricks wall built in cement mortar 1:4 complete all as specified and directed.
Rendering 15 mm thick in cement mortar 1:6 on brick masonary wall surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed.
15mm thick rendering in cement mortar 1:4 to brick masonary wall surfaces or on other than fair faces of brick masonary fair finished without using extra cement complete all as specified and directed.
Rendering 5 mm thick in cement mortar 1:3 as on concerete surface in ceilings finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
Complete removal of existing water proofing treatment of any description incl under layer, taking down of cement plaster, concreet bricks and mud pushka of any thickness and removal of debris off the premises complete all as specified and directed by Engineer-in-Charge.
Applying cement slurry over existing roof surface @ 3 Kg/Sqmm incl mix with water proofing liquid @ 0.15 ltr per 50 kg cement bags as per manufactures instructions complete all as specified and directed.
PCC (1:2:4) type B-0 using 12.5 mm graded crushed stone aggregrate laid over roof slab after applying cement slurry for filling undulationations finished even and smooth without using extra cement complete all as spd and directed.
Screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment mixed with using water proofing liquid @ 0.15 Ltr per bag of cement complete all as specified and directed by Engineer-in-Charge.(Note : Water proofing liquid shall be measured and paid separately)
Cool roof anti skid tiles 300x300x10 mm with high SRI value not less than 90 laid over existing treatment on accessible roof and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
32mm dia GI pipe, medium grade as in spout pipe in sunken floor complete all as specified and directed.
PCC 1:5:10 type E-2 using 40mm graded crushed stone aggregate as sunken sub base of floor fillings with broken brick agg to guage not exc 63 mm complete all as specified and directed. .
Supply Integral water proofing Liquid complete all specified and as directed
Pressed steel frame of size 105mm x 60mm made out of 1.25mm sheet for doors single rebated including minimum 03 x mild steel hinges medium weight 100mm long and 25mm x 3mm flat iron in hold fast, tie bar including necessary fixing lugs, lock strike plate and fixing arrangement etc complete as specified and Including making good in cement mortar 1:3 or cement concrete 1:2:4 type B-I complete all as specified and as directed.
Pressed steel frame of size 125mm x 60mm made out of 1.25mm sheet for doors Double rebated including minumam 06 x mild steel hinges medium weight 100mm long and 25mm x 3mm flat iron in holdfast, tie bar including necessary fixing lugs, lock strike plate and fixing arrangement etc complete as specified and Including making good in cement mortar 1:3 or cement concrete 1:2:4 type B-I complete all as specified and as directed.
Cement concrete 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in back fill of pressed steel door frames completet all as specified and as directed by Engineer-in-Charge
35 mm thick factory made flush door shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed
35mm thick factory Glazed and skeleton shutters, open rebated of saal wood second class hard wood rail and stles and prepared to receive glass, gauze, etc. (without sash bars), divided into squared, with plain, cham-fered or rounded, mitred and rebated sash bars, any numbers sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats complete all as specified and directed by Engineer-in-Charge. (Note :- S & F Glass/gauge shall be measured and paid for separately)
Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick double side prelam PVC sheet used instead of Plain colour PVC sheet , suppling & fixing in opening complete all specified and as directed
30 mm thick factory made both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at sitecomplete all specified and as directed
Steel window grills for box type framed windows forged into spikes, framed balusters, walkway railing and similar work including welding complete FE-290 grade E-165 complete all as specified and directed.
Factory made steel windows double shutter box type (up to 4th Storey Bldg) , outer frame made out of ERW TUBE 'P' section(65x45x25mm) and shutters of ERW TUBE 'P' section (50x35x20mm) operable shutters side hung includding pistol hinges with two Nos of MS Tower bolts 150mm size on each shutter steel handle and stopper of 'Z' section as specified complete with sash bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitabel fittings/openning for cooler/AC where required .Steel windows will be double shutter external glazed and internal wire gauzed complete all as specifed and as per Drg No CEPZ/TD-324/07 1/3 to 3/3 all as specified and directed by Engr-in-Charge. NOTE: The quoted rate against the above item shall also include (i) for Provn of one shop coat of zinc chromate primer on all exposed steel surfaces and one coat of coal tar on the ends of steel frame in contact with brick/conc surface (ii) 04 Nos MS Steel lugs of 20x5mm MS flat 20cm long over all welded to frames (iii) PCC block for embedding lugs..
Description all as per Srl Item No 52 here in before but for steel ventilators
3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane (up to 4th Storey Bldg) complete all specified and as directed.
3mm thick Figured glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane (up to 4th Storey Bldg) complete all specified and as directed.
Stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.
Powder coated aluminium box section in cupboard with side hung shutters fixed with & including aluminium composite panel LDPE core PET coating ( both side decorative type ) fixed to shutter frame with powder coated aluminium beading clip & rubber gasket inside of the cupboards , frame made of powder coated aluminium box section & shelf tops & verticle partitions & back side made of alumnium composite panel fixed to frame with powder coated aluminium beading etc.Frame ,shutter, shelves & vertical partition shall be made of size & material as appended below complete all as specified & directed (a) Frame :- Powder coated aluminium box section 85x44x1.48mm thick, fixing with wall face to be done with powder coated aluminium angle cleats & powder coated matching colour S S screws.(b) Shutters:- (i) Middle and lock rail :Powder coated aluminium box section 85x44x1.0 mm thick (ii) Bottom rail : Powder coated aluminium box section85x44x1.0 mm thick.(iii) Top rail/style :Powder coated aluminium box section 85x44x1.0 mm thick. (iv) Aluminium composite panel : 5.0 mm thick both side decorative type.(c) Shelves :- Frame : Powder coated aluminium box section 61.85 x31.75x1.0 mm thick in both horizontal & vertical sides, (ii) Aluminium composite panel : 4.0 mm thick both side decorative. (Note:- Shelf area per sqm of front measerable area shall not be less than 3.10 sqm , design of shelf to be approved by GE). (d) Powder coated aluminium beading : 0.7mm thick (e) Powder coated aluminium handle, tower bolt, (f) stopper , mortise lock 4 leaver( 02 Nos of each cupboard) of approved make.Making good of wall surface to match with existing surface complete.with neccessary fittings all as spd as directed measurable area only front surface area of cupboard shutter . (Note:- Design / colour / pattern of aluminium composite panel & colour of powder coating shall be approve by GE )
Supply and fix continuous (Piano) hinges 30mm heavy duty mild steel bright finish or electrogalvanised sutable for 18/19mm thick shutter and fixed complete all as specifed and directed by Eng in charge.
Supply and fixed hasp & Staple safety type staninleess steel with S/S hinges spin includinng bolt to hinges plate fixed with screw of 75mm in length complete all as specifed and directed by Eng in charge.
200 mm size Stainless Steel glossy finish handles with SS screw, complete all as specified and as directed
200 mm size Aluminium, anodised, barrel tower bolts of extruded section and fixed completed all as specified and directed.
150 mm thick Aluminium, anodised, barrel tower bolts of extruded section and fixed completed all as specified and directed.
150 mm size aluminium handles, cast type anodised completed all as specified and directed.
100 mm size butt hinges medium weight stailess steel complete all as specified and directed by Engineer-in-Charge.)
150 mm size floor door stopper of aluminium alloy body and tongue, brass body and tongue with hard drawn steel spring. Fixed in floor complete all as specifieds and directed.
250/300 mm size ordinary mild steel , rat tailed rod pattern spring including roller and roller plate welded to mild steel frame.fixed in repair complete all as specifieds and directed.
250 mm size Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixedcomplete all as specified and directed
150 mm size MS Pressed Steel handles,Stove enamelled black completed all as specified and directed.
Rotational moulded polethylene water tank of 1000 ltrs capacity, ISI Marked (cylindrical vertical with closed top with suitable locking system) hoisted and fixed in position all as pacific SSR Part- I including dismantling of existing water tanks capacity n exc 1000 ltr complete all as specified and directed..
20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge.
GI tube 15 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 15 mm dia & connections complete all as specified and directed.
Refixing only GI tube 15 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 15 mm dia & connections complete all as specified and directed.
GI tube 20 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 20 mm dia & connections complete all as specified and directed.
Refixing only GI tube 20 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 15 mm dia & connections complete all as specified and directed.
Vitreous chinaware coloured wash hand basin with pedestal of size 55X45X82cm complete including fancy CP pillar tap, CP Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed by Eng in charge.
Brass chromium plated wall mixer 2 in 1,15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and directed.
Fancy type 125 mm size square brass CP shower rose any shape with 150mm long bend complete all as specifieds and directed. .
15 mm dia bib tap fancy type chromium plated with flange quarter turn complete all as specified as directed.
Fancy type chromium plated brass two way angle cock suitable for 15mm bore pipe complete all as specified and directed.
Stainless steel of AE - SI 316 grade tubular towel ring including apair of CP brass bracket complete all as specifieds and directed.
15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed
Fancy type brass chromium plated soap dish of 160x160x90 mm , complete all as specifieds and directed.
Fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specifieds and directed. .
Fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specifieds and directed.
20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specifieds and directed.
Supply and fixed 15mm dia gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specifed and directed by Eng in charge.
Vitreous china squatting pan of orrissa pattern size 580 x 440 mm white with "P"or "S" trap size 100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified.
Vitreous china wash down water closet pan (Pedestal pattern) white,(excluding flushing cistern and pipe) including PVC Seat cover for EWC pan (White ) of standard quality including hinges bolt,complete all as specifieds and directed.
PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed .
Brass CP health faucet with 8mm Dia 1.0 Meter Long Flexible Tube and Wall Hook screwecd for iron pipe fancy type long body complete all as specifieds and directed.
PVC (SWR) floor trap plain with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.
Dismentaling PVC/Cement/CI Pipes 50 to 110mm dia incl all fitting like bend,branch pieces,connector, heel rest bend etc incl cutting through bricks/RCC/PCC wall and removing from site complete all as specifed and directed by Eng in charge.
PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed by Engr-in-charge.
PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fittingcomplete all as specified and directed.
PVC (SWR) 110mm bore bends any radius complete all as specified and directed.
PVC (SWR) 75mm bore bends any radius complete all as specified and directed.
PVC (SWR) 75 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.
PVC (SWR) 110 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.
Supply and fixed UPVC (SWR) Vent cowl 75 mm dia complete all as specifed and directed by Eng in charge.
Supply and fixed UPVC (SWR) Vent cowl 110 mm dia complete all as specifed and directed by Eng in charge.
PVC ( SWR ) Gully trap 125/110 mm , with grating incl jointing to waste pipe fixed in Cement concrete 1:2;4 type B1 complete all as specified and as directed .
Stainless steel towel hanger with minimum 06 Hooks and fixed to wall/door complete all as specified and directed.
Fixed in repairs Stainless Steel plate rack of size 90x80x25cm made with 1.00 mm thick sheet including taking out existing wooden plat rack, complete all as specifieds and directed.
Fixed in repairs 0.8 mm thick stainless steel kitchen sink size 590x460x230mm undermount, single bowl (bowl size 540x410x230 mm) , incl waste pipe & SS coupling, washers etc. complete all necessary fittings complete all as specifieds and directed.
Fixed in repairs 20 mm dia stainless steel 1.0 mm thick fancy type droppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate c/s in each end & intermediate support complete all as specified and as directed
Mild steel box type framed work as in Light sources , grills or forged into spikes, framed balusters, walkway railing,tank staging and similar work with flat including welding complete FE-290 grade E-165 complete all as specifieds and directed.
Cutting chases of hanging chajjas, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of sunshades, shelves, lintels, Chajja (up to 4th Storey Bldg) etc making good, cutting out exc 10cm and not exc 40cm girth in RCC chajjas in brick walls complete all as specified and as directed.
Dismantling of concrete by chiseling from RCC members like column , beam, parapet facia, chajja, ceiling,etc (up to 4th Storey Bldg) exposingthe reinforcement without disturbing the reinforcement free from rust by sand blasting/using chemical , apply a coat of rustolin to remove rust and acralic polymer on old rusted reinforcement proving at places addl reinforcement welding with existing reinforcement as directed wherever required binding RCC 50 mmx50 mm (10 mm gauge welded mesh ) & tack , securing with clips / blinding wire, welding & provision guniting pressure 2.2 to 2.5 kg /Sqmm with admixer 1 cement 3.5 of sand of thickness 25 to 40 mm including stripping floating with wooden strippers for proper dimension control neccssary form work & scaffolding up to three storey and including height of head room complete surface of guniting to be finished fair with 10 mm thick plaster in cement mortar 1:4 with water proofing compound @3% by weight of cement and recron 3 S as per manufacturer instruction cleaning & removing of waste meterial etc as dirply two coat of Dr fixit /pidilite new coat ezee at interval of 8 hours cure for the surfaces complete all as specifieds and directed.
Preparation of new untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge.
Preparation of new untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed by Engineer-in-Charge.
Applying Two coats of 100% Premium acrylic emulsion paint (apex) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqmm over and including priming coat of exterior primer applied @ 0.90 litre/ 10Sqmm over new surface,complete all as specifieds and directed.
Complete removal of existing treatment including washing, rubbing down with sand paper and stopping of painted surfaces including preparation of old plastered surfaces of walls, chajjas, fascia, face of columns, beams etc. and applying two coats of 100% Premium acrylic emulsion paint (apex) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqmm over and including priming coat of exterior primer applied @ 0.90 litre/ 10Sqmm(up to 4th storey with necessary scaffolding) complete all as specified and directed.
Complete removal of existing treatment and applying two coat of OBD on walls over two coats of wall care putty complete all as specified and directed.
Two coat of OBD on newly plastered wall surface over two coats of wall care putty encluding preparetion of surface complete all as specified and directed .
Preparation of newly plastered surface and applying of three coat of white wash on ceiling complete all as specified and directed.
Complete removal of existing treatment and applying two coats of white wash on ceiling complete all as specified and directed.
Taking down carefully aluminium conductor point wiring (light, fan, socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.
Taking down of unsv MCB DB SPN /TPN along with MCB's complete all as specifieds and directed.
Taking down of unsv Sub main wiring of any size complete all as specifieds and directed.
Complete point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLSH insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 Sqmm copper conductor flexible FRLSH insulated drawn in and including concealed PVC rigid conduit medium grade ISI marked after cutting chases in wall , plastering after concealing conduit , including modular galvanised flush boxes of suitable size and white cover plate with frame as per relevant IS for mounting modular switches, sockets, fan regulators etc complete all as specified and as directed for the following :-
(a) One Light / Fan/ Exhaust Fan point controlled by one, one way switch 6 Amp complete all as specifieds and directed.
(b) One 3 pin socket outlet 6 amp independent complete all as specifieds and directed.
(c) One 3 pin socket outlet 6 amp same board complete all as specifieds and directed.
(d) One bell/ buzzer point controlled by one, complete all as specified and directed.
(e) One Light point controlled by one, Two way switch 6 Amp complete all as specifieds and directed.
All as per descreption srl item No 116 above but for one 3 pin socket outlet 16 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 Sqmm as in continuous earth wire complete all as specifieds and directed.
Modular type switch, one way 6 Amps , 1 module complete all as specified and directed.
Modular type switch, Two way 6 Amps , 1 module complete all as specified and directed.
Modular type socket 5 pin, 6 Amps 2 module complete all as specified and directed.
Modular type switch, one way 16 Amps, 1 module complete all as specified and directed.
Modular type socket 5 pin, 6 A/16 Amps 2 module complete all as specified and directed.
Modular type fan regulator step down 120 Watt, 2 module complete all as specified and directed.
Ceiling rose surface, backelite, three terminal, 240 volts complete all as specified and directed.
Modular bell push with indicator polycarbonate materials ISI markrd 1 module, 6 Amps 240 Volts complete all as specifieds and directed.
Musical door bell, AC 230 Volts single phase complete all as specifieds and directed.
LED light fitting 1 x 18Watt, 220V, including LED Tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with all fixing arrengenment all as directed by Engr in chage. Note:- The LED batten and LED tube rod shall be of same make.
Lamp holder,PVC /Polycarbonate type with back plate for batten fitting complete all as specifieds and directed.
LED lamp suitable for B22 holder of capacity 7 Watt complete all as specifieds and directed.
Energy saving new generation 10W LED IP65 bulk head luminaire with opal diffuser complete all as specified and directed. Make : Havells or equivalant in Crompton/ Philips/ Wipro
Distribution Board (SPN) double door 8 Way and should be IP 43 protected with Copper Bus bar 100 Amp rated ,Earth Bar ,neutral Bar Door Earthing complete all as specifieds and directed.
MCB SPN complete 32 Amp with rupturing capacity 10 KA 'C' series, complete all as specified and directed.
MCB Single pole 6 to 32 Amp with rupturing capacity 10 KA 'C' series, complete all as specified and directed
Sub main wiring with single core cable 2 x 6 Sqmm FRLSH insulated Unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1 x 6 Sqmm FRLSH insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface complete all as specified and directed.
Taking down and refixing of Ceiling fan of any size/sweep, including oiling, Greasing and cleaning and applying two coats of synthetic enameled paint after preparation of surface complete over a coat of primer, complete all as specifieds and directed. by Engr-in-charge.
Taking down and refixing of Exhaust fan any size/sweep, including oiling, Greasing and cleaning complete, all as specified and directed by Engr-in-charge.
Taking down the existing electric meter of any capacity and make after disconnecting electrically upto 25 Amp and examine carry out the servicing and refixing including applying one coat of paint(outer box), testing in all respect for smooth running complete all as specifieds and directed.
VTP&N (Vertical distribution board 4 way double door suitable for and including MCCB four pole as incomer and out going MCBs and should be IP 43 protected with copper busbars , neutral link 200 amp ,earthing bar complete all as specifieds and directed. Note :- (a) MCCBs FP & SP shall be measured paid separately (b) MCB & DB should be same size
4 pole MCCB 100 Amp ,415 volts with rupturing capacity 16 KA ,complete all as specified and directed by Engr in charge
Complete earthing with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironl including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqmm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specifieds and directed.
Replacement of unserviciable underground LT cable 1100 Volts grade heavy duty electric cable XLPE insulated & PVC outer sheathing with aluminium stranded conductor, Armoured cable 35 sqmm 3.5 core cable confirming to IS-7098 Part-I (1988) with latest ammendments of sizes complete all as specified and directed.
Excavation in trenches not exceeding 1.5m in width and not exceeding 1.5m in depth and getting out in any type of soil complete all as specifieds and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specifieds and directed.
Removal of excavated surplus material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specifieds and directed.
River sand as cable cushioning 15cm thick layer before laying and 8cm thick over cable after laying the cable in trench complete all as specifieds and directed.
Dry bricks over cable as mechanical protection layed flat with width equal to length of brick with sub class 'B' bricks complete all as specifieds and directed.
GI pipe ''light grade'' for road crossing / on wall / on pole with fixed clamps, nuts, bolts for cable protection of size 40 mm dia complete all as specifieds and directed.
Srl item No 154 Contd … GI pipe ''light grade'' for road crossing / on wall / on pole with fixed clamps, nuts, bolts for cable protection of size 40 mm dia complete all as specifieds and directed.
M/S MANJIT SINGH AND SONS
THAKUR BUILDERS AND CO
M/S Shesh Paul Gupta
M/S ARUN ANAND
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .