REPAIRS TO GATES CHAIN LINK FENCING BARBED WIRE FENCING HARD STANDING AND OTHER CONNECTED WORKS UNDER AGE B R II AT GE DSSC WELLINGTON

Amount

Dismantling post/struts (wood, steel or RCC) of any section embedded in concrete including taking out embedded portion and making good disturbed ground complete all as specified and as directed

Dismantling MS steel work of any description not other wise provided for complete all as specified and as directed

Dismantling fencing wire mesh of any type and thickness complete all as specified and as directed

Dismantling barbed wire of any type complete all as specified and as directed

Excavation in Post Holes ( or similar holes) each not exceeding 0.5 Cum and getting out in hard/dense soil, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed

M&L for providing PCC 1:3:6, type C2, using 40mm graded stone aggregate as in foundation filling and mass concrete including necessary form work complete all as specified and as directed

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed and to be fitted with washer and the hexagonal or square nut dia 5 to 10 mm not exc 5cm long complete all as specified and as directed

Supply only chain link MS galvanised fencing any size or type and any thick complete all as specified and as directed

Fixing only chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed

Supply only MS round bar 10 mm dia fixed independently including hooking ends for chain link fencing conforming to Fe 290 Gde E-165 complete all as specified and as directed

S&F mild steel for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, prong etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and pintel hinges or steel hanging door fittings, inclusive of steel sheeting or other covering, running rails and guides, CI ornaments fitting; also fastening and fixing complete and similar work confirming to Fe-290 Gde E- 165 complete all as specified and as directed

M&L for removing the steel gates with or without removing the gate pillars and re-fixing the gates to the existing or new pillars by changing the location of the hinges through necessary cutting and rewelding /re-fixing the hinges, aldrops, stoppers etc complete all as specified and as directed

S&F in 2 stand steel barbed wire 2.24 mm dia barbs at 75 mm spacing and fixing to MS round bar nibs to RCC/Steel posts with new GI wire ( Note :- Each line of wire to be measured) complete all as specified and as directed)

Description all as per item No 14 above but fixed in repairs old barbed wire of any description obtain from item No 4 complete all as specified and as directed

M&L for 2 coats of synthetic enamel painting over a coat of red oxide zinc crome on new steel surface of any description over 10 cm width or girth not otherwise described incl preparation of surfaces complete all as specified and as directed

M&L two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces, n exc 10cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and as directed

Demolition of brick work/PCC block masonry/stone masonry etc built in cement mortar, incl all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc complete all as specified and as directed

M&L for precast cement concrete solid building blocks masonry exc 10 cm in width and setting in cement mortar 1:4, type C-1, 1:3:6 (20 mm graded aggregate ) complete all as specified and as directed

M&L for Providing precast cement concrete type C1, 1:3:6 (20mm grades agg) in CM 1:6 in as in kerb stone and setting in mortar complete with joints to match incl dismantling/excavation for fixing complete all as specified and as directed

Refixing of Old kerb stone in cm 1:4 on road edge including taking down old kerb stone and excavation/filling earth etc complete all as specified and as directed

M&L PCC 1:2:4 Type B0 using 12.5mm graded aggregate as in hunching/coping smooth finished as required. complete all as specified and as directed

M&L for 40mm Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors in repairs complete all as specified and as directed

S&F UPVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls (110mm bore) in repairs complete all as specified and as directed

S&F PVC (SWR) bends any radius 110 mm bore. complete all as specified and as directed

S&F PVC (SWR) bends any radius 75 mm bore. complete all as specified and as directed

S&F in repair 250 mm, MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed

Taking down cement plaster any description on brick or stone walls etc including raking out joints, haking for key scrubbling down with water etc. complete all as specified and as directed

Rendering 15mm thick in cement mortar 1:4 on fair face of stone surfaces /brick finished even and smooth without to using extra cement complete all as specified and as directed

M&L for preparation of new plastered external surfaces and applying two coats of acrylic emulsion exterior paint Apex Ultima of Asian Paint (weather coating) over on coat of primer after applying wall care putty complete all as per manufactured instruction complete all as specified and as directed

Demolition of Concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed

M&L for Cement concrete type B-1, 1:2:4 (20mm graded agg) 40 mm thick even and fair to receive top layer complete all as specified and as directed

M&L cement concrete 1:3:6 type C-2 (40mm graded agg) 75 mm thick as in Plinth protection/and pavings finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed

M&L Chequered cement concrete coloured tiles 300mm x 300mm and 22-25 mm thick set jointed in neat cement slurry in floors with grey cement & pigment including 15 mm thick screed bed in cm 1:6 complete all as specified and directed

M&L for Machine pressed pre polished precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade concrete with grey cement and no pigment laid over including 50mm thick sand compacted layer over compacted earth complete all as specified.

M&L for providing PCC 1:4:8, type D2, using 40mm graded stone aggregate as a sub base complete all as specified and as directed

Demolition of reinforced cement concrete of any description and in any position complete all as specified and as directed

M&L Reinforced cement concrete type B1, 1:2:4 (20MM graded aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete.

M&L Reinforced cement concrete type B1, 1:2:4 (20MM graded aggregate) as in columns, pillars, piers, posts and struts complete all as specified and as directed

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed

Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished flat surfaces. complete all as specified and as directed

M&L Mild steel bars TMT 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

All as per item No 42 above but 5 mm dia & over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed

S&F Polycarbonate any colour (as approved) plane solid sheeting 4mm thick with side lap fixed with coach screw and washer in door, wall, gate, roof etc fixed in repairs complete all as specified and directed

M&L for preparation of new plastered brick/stone/concrete surface including cleaning vegetation from Kerb stone, make good and applying two coat of synthetic paint complete as per manufactured instruction all as specified and directed.

M&L for preparation of old painted surfaces of steel materials of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L old treated concrete/stone surfaces and applying one coat of synthetic enamel paint on surfaces of wall / kerb stone over a coat of primer as per manufacture's instruction including cleaning vegetation from kerb stone/ wall complete all as specified and as directed

M&L for preparation of old plastered surfaces of wall and applying one coat of anti fungal paint (Apex ultima of Asian) on external wall on surfaces of parapet wall stone etc. complete all as specified and as directed

M&L for preparation of old surfaces of floors/MP tiles and applying one coat of anti fungal paint (Apex tiles guard of Asian) on external floor or Mangalore pattern tiles surfaces complete all as specified and as directed

M&L for granite (of any type) slab 18 to 20mm thick for pillar or slab etc matching cut, bedding and jointed with grey cement slurry and pointed with white cement with admixture of pigment of match to shade of granite stone including notching or rounding of edges, grinding and polishing types over 15mm thick screed bed in CM 1:4 in repairs complete all as specified and as directed by Engr-in-Charge.

M&L for plain cement concrete type-C2, 1:3:6 (40mm graded agg.) in surface channel and drains complete all as specified and directed

M&L extra for forming fair finished drain or channel any girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc complete all as specified and directed

Dismantling Asbestos cement/CGI/Galvalume (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed

M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, Crimp curved where necessary fixed with self tapping screws complete all as specified and directed

M&L for pre-painted Galvalume aluminium Zinc coating GI based steel sheet 0.5 mm thick of any colour having tensile strength of 550 mpa as in covering/cladding to wall fixed with self tapping screws complete all as specified and directed

M & L for mild steel work as in tubular roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat, square tube etc sections) including distance pieces, cleats etc. Fe 410-W (Gde-E- 250) quality- A complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed

PM CONSTRUCTION

JK BUILDERS

GUNASEKARAN AND CO

GMS Builders

Sree Constructions

ACE PROMOTERS

K.AYYAPPAN