Loading
Loading…
Loading…
Tender Value
₹1.4 Cr
EMD Value
₹2.2 L
Closing Date
24 Mar 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
DIVISION
13 conditions · 2 needing a document upload
Financial Eligibility Criteria:--- The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria:--- (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. (Please refer Tender booklet for further clarification) Similar Nature of work - Any type of civil work viz. building up to G+4 and structures work, pipe lines, underground and overhead tanks, foundation treatment works in any Railway embankment/cutting, any earth work, cover over platform, bore wells, level crossing works including lifting barriers, cement concrete apron works etc.
4 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
As per tender document attached.
Tenderers may please note - During lockdown period (declared due to COVID - 2019 pandemic) - A) Necessary authority to travel to site of work on a specific request indicating date shall be issued by Railway Administration to facilitate site visit. B) TC meetings and Negotiation can be conducted through online Video/Audio chat on conference call. Record of same should be kept.
JL-Construction of SSE(Sig) offfice & store at JL on BSL Division.
DRMWBSL052026t4
DRMWBSL052026t4
Open
Works - General
12 Months
Jalgaon, Maharashtra
₹0
₹2.2 L
24 Mar 2026
25 Feb 2026
10 Mar 2026
82 items across 4 schedules · ₹7,67,945.07 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum | 693 | 177.5 | 1,23,007.5 |
| 2 | All kinds of soil | cum | 210 | 126.8 | 26,628 |
| 3 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 105 | 7,878.5 | 8,27,242.5 |
| 4 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. | Sqm | 35 | 146.15 | 5,115.25 |
| 5 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. | Sqm | 70 | 749.3 | 52,451 |
| 6 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 388 | 392.15 | 1,52,154.2 |
| 7 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 356 | 927.25 | 3,30,101 |
| 8 | Lintels, beams, plinth beams, girders, bressummers and cantilevers | Sqm | 670 | 736.4 | 4,93,388 |
| 9 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 418 | 961.3 | 4,01,823.4 |
| 10 | Under 20 cm wide | Metre | 133 | 208.55 | 27,737.15 |
| 11 | Weather shade, Chajjas, corbels etc., including edges | Sqm | 80 | 951.1 | 76,088 |
| 12 | Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) | Sqm | 356 | 384.3 | 1,36,810.8 |
| 13 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg | 23456 | 107.85 | 25,29,729.6 |
| 14 | Thermo-Mechanically Treated bars of grade Fe- 500D or more. | Kg | 12805 | 107.85 | 13,81,019.25 |
| 15 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 298 | 9,504.75 | 28,32,415.5 |
| 16 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 135 | 9,860.4 | 13,31,154 |
| 17 | Add for using extra cement in the items of design mix over and above the specified cement content therein. | Quintal | 129 | 733.5 | 94,621.5 |
| 18 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 14 | 7,132.25 | 99,851.5 |
| 19 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 200 | 9,105.95 | 18,21,190 |
| 20 | Area of slab upto 0.50 sqm | Sqm | 75 | 5,413.5 | 4,06,012.5 |
| 21 | Area of slab over 0.50 sqm | Sqm | 31 | 5,136.3 | 1,59,225.3 |
| 22 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 175 | 1,267.95 | 2,21,891.25 |
| 23 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 28 | 3,167.95 | 88,702.6 |
| 24 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). | Sqm | 28 | 462.35 | 12,945.8 |
| 25 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg | 1500 | 238.35 | 3,57,525 |
| 26 | With 12 mm mild steel U beading | Sqm | 18 | 939.2 | 16,905.6 |
| 27 | 300x16 mm | Each | 10 | 216.55 | 2,165.5 |
| 28 | 250x10 mm | Each | 5 | 83.9 | 419.5 |
| 29 | 125 mm | Each | 10 | 39.95 | 399.5 |
| 30 | 30 mm thick plain PVC door shutters | Sqm | 8 | 3,182.95 | 25,463.6 |
| 31 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 780 | 133.7 | 1,04,286 |
| 32 | 80x0.90 mm M.S. laths with 0.90 mm thick top cover | Sqm | 23 | 3,191.35 | 73,401.05 |
| 33 | Providing and fixing ball bearing for rolling shutters. | Each | 2 | 492.35 | 984.7 |
| 34 | Electric resistance or induction butt welded tubes | Kg | 5730 | 194.4 | 11,13,912 |
| 35 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. | Kg | 325 | 97.2 | 31,590 |
| 36 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 1000 | 172.6 | 1,72,600 |
| 37 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Kg | 50 | 772.4 | 38,620 |
| 38 | Size of Tile 600 x 600 mm | Sqm | 318 | 1,464.85 | 4,65,822.3 |
| 39 | Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. | Sqm | 41 | 3,186.7 | 1,30,654.7 |
| 40 | Extra for providing and fixing wind ties of 40x 6 mm flat iron section. | Metre | 75 | 195.6 | 14,670 |
| 41 | 110 mm diameter | Metre | 144 | 377.4 | 54,345.6 |
| 42 | 110 mm | Each | 100 | 371.3 | 37,130 |
| 43 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 238 | 738.65 | 1,75,798.7 |
| 44 | Ridges plain (500 - 600mm) | Metre | 50 | 532.35 | 26,617.5 |
| 45 | 1:4 (1 cement: 4 fine sand) | Sqm | 1415 | 347.05 | 4,91,075.75 |
| 46 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 1073 | 262.7 | 2,81,877.1 |
| 47 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm | Sqm | 1255 | 193.7 | 2,43,093.5 |
| 48 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture | Sqm | 150 | 170.7 | 25,605 |
| 49 | Two or more coats on new work | Sqm | 160 | 155.9 | 24,944 |
| 50 | Nominal concrete 1:3:6 or richer mix (including equivalent design mix) | cum | 5 | 2,434.25 | 12,171.25 |
| 51 | Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) | cum | 5 | 1,503.6 | 7,518 |
| 52 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 2 | 3,551.25 | 7,102.5 |
| 53 | In cement mortar | cum | 8 | 2,060.2 | 16,481.6 |
| 54 | Moorum | cum | 267 | 768.25 | 2,05,122.75 |
| 55 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. | Sqm | 210 | 972 | 2,04,120 |
| 56 | Orissa pattern W.C. pan of size 580x440 mm | Each | 7 | 3,169.05 | 22,183.35 |
| 57 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. | Each | 5 | 2,784.95 | 13,924.75 |
| 58 | 10 litre capacity - White | Each | 8 | 1,190.65 | 9,525.2 |
| 59 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. | Each | 3 | 1,648.95 | 4,946.85 |
| 60 | Flat back wash basin of size 450x300 mm | Each | 6 | 627 | 3,762 |
| 61 | 32 mm dia | Each | 10 | 103.9 | 1,039 |
| 62 | Rectangular shape 453x357 mm | Each | 7 | 1,361.8 | 9,532.6 |
| 63 | 15 mm nominal dia Pipes | Metre | 35 | 244.7 | 8,564.5 |
| 64 | 25 mm nominal dia Pipes | Metre | 50 | 355.4 | 17,770 |
| 65 | 50 mm nominal dia Pipes | Metre | 20 | 794.25 | 15,885 |
| 66 | 65 mm nominal dia Pipes | Metre | 10 | 1,674.4 | 16,744 |
| 67 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Per Litre | 4000 | 11 | 44,000 |
| 68 | 15 mm nominal bore, 86 mm long, weighing not less than 88 gms | Each | 11 | 125.6 | 1,381.6 |
| 69 | 15 mm nominal bore, 86 mm long, weighing not less than 88 gms | Each | 11 | 118.5 | 1,303.5 |
| 70 | 25 mm nominal bore, 152mm long, weighing not less than 440 gms | Each | 4 | 523.8 | 2,095.2 |
| 71 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 70 | 530.9 | 37,163 |
| 72 | Powder coated aluminium (minimum thickness of powder coating 50 micron) | Kg | 60 | 634.45 | 38,067 |
| 73 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) | Sqm | 34 | 1,505.25 | 51,178.5 |
| 74 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS: 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @1.7 kg/sqm). | Sqm | 20 | 769.6 | 15,392 |
| — | 896.32 | 129.34 | 1,15,930.03 | ||
| Schedule total | ₹1,15,930.03 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
DRMWbsl052026t4.pdf
ATTACHMENT
GCC-2022-uptoACS10.pdf
ATTACHMENT
PCEcircular.pdf
ATTACHMENT
AnnexureVIB.pdf
ATTACHMENT
AnnexureVIAFormatofEMDandPBG.pdf Annexure VIA Format of EMD and PBG
ATTACHMENT
BeneficiaryName.pdf
ATTACHMENT
AnnexureVIAFormatofEMDandPBG.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .