REPAIR AND OTHER ALLIED WORKS AND REPAIR TO FLOORING, PLINTH PROTECTION, TILING, PLASTER, PLUMBING AND VARIOUS B/R RELATED WKS IN VSV, TECH AREA AND MES COLONY AT 7 BRD, AF UNDER GE (AF) TUGHLAKABAD

Amount

Taking down wall plastering finishes etc. complete all as specified and directed by Engr-in-charge.

M&L for Dubbing out average 10mm thick on irregular face of walls, chajjas , facia etc and mixed with WPC @ 3% wt of cement (when specifically ordered in writing) in CM (1:4) complete all as specified and directed by Engr-in-charge. Note: WPC shall be paid separately in respective item.

M&L for 15mm thick rendering in CM (1:4) on Brick masonry with water proofing compound @ 3% by weight of cement, surfaces to be finished even & smooth without using extra cement complete all as specified and directed by Engr-in-charge. Note : WPC shall be measured and paid separately .

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement based paint, over a coat of chalk whiting complete all as specified and directed by Engr-in-charge.

Supply only integral water proofing compound ISI Marked complete all as specified and directed by Engr-in-charge.

M&L for 10mm thick rendering in cement mortar (1:6) on fair faces of concrete surfaces as on brick work finished even and smooth without using extra cement including preparation complete all as specified and directed by Engr-in-Charge.

M&L for two coats of distemper oil emulsion to newly plastered wall surfaces including preparation of surface including chalk whiting as primer on plaster surface complete all as specified and directed by Engr-in-Charge.

M&L rendering 5mm thick in patches in cement mortar in (1:3) on ceiling surface complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plaster surfaces of wall and applying three coats of white wash on ceiling complete all as specified and directed by Engr-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided and removing from site complete all as specified and directed by Engr-in-charge.

Dismantling of AC/CGI/Fibre glass sheet corrugated/ semi corrugated sheet & ridge in roof covering complete all as specified and directed by Engr-in-charge.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed by Engr-in-charge.

S&F Pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-charge.

S&F Pre- painted galvatume aluminium zinc coating GI based plane steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-charge.

Demolition of cement concrete (Unreinforced) in ground floor & paving n exc 15 cm thick (below or above ground level) and thrown away from defence land complete all as specified and directed by Engr-in-charge.

M&L for 75 mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate finishing the concrete surface even and fair complete all as specified and directed by Engr-in-charge.

M&L for 25mm thick cement concrete flooring (1:2:4) type B1 using 20 mm graded stone aggregate finished even and fair without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed by Engr-in-charge.

M&L for 20 cm x 20 cm x 25 mm thick chequered cement concrete tiles set jointed and pointed in neat cement slurry in floors with grey cement and no pigments complete all as specified and directed by Engr-in-charge.

M&L for machine pressed coloured rubberized moulded precast concrete interlocking paver block any shape and size confirming to IS 15658 - 2006 to 60 mm thickness M-35 grey cement and pigment including laid over 25 mm thick layer of sand cushioning complete all as specified and directed by Engr-in-charge.

M&L for precast cement concrete blocks masonry with solid blocks exc 10 cm in width in PCC (1:2:4) Type B1 using 20 mm graded stone aggregate & set in CM (1:4) in walling as in kerb block, one edge chamferred and finished complete all as specified and directed by Engr-in-charge.

M&L for 100 mm thick Cement concrete (1:4:8) type D2 using 40mm graded stone aggregate complete all as specified and directed by Engr-in-charge.

M&L for 10 to 12 mm thick vitrified unglazed and unpolished, scratch resistant, matt finished coloured tiles (square/ rectangular) of size not less than 300mm x 300mm as in parking /hardstanding etc including set, jointed in cement slurry and pointed in white or coloured cement to match the colour/ shades of tiles over and including 15 mm thick screed bed in CM (1:4) and removing rubbish off the premises from Defence land complete all as specified and directed by Engr-in-charge.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed by Engr-in-charge.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises from Defence land complete all as specified and directed by Engr-in-charge.

M&L for 15 mm thick Screed bed or bedding layer in CM (1:6) set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed by Engr-in-charge.

S&F glazed ceramic joint free edge cut coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm set and jointed in neat cement slurry and pointed in colour cement as in floors, complete all as specified and directed by Engr-in-charge.

Description same as per above item but as on dado/ skirting including 10 mm thick rendering in CM (1:4) complete all as specified and directed by Engr-in-charge.

S&F glazed ceramic joint free edge cut coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm in floors, complete all as specified and directed by Engr-in-charge.

S&F glazed ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm on vertical surfaces such as skirtings including 10 mm thick rendering in CM (1:4) etc complete all as specified and directed by Engr-in-charge.

S&F glazed ceramic coloured tiles 7 to 8 mm thick 450 x 300/ 300x300 mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade etc including 10 mm thick rendering in CM (1:4) complete all as specified and directed by Engr-in-charge.

M&L in repairs marble work (Udaipur green slabs) 18 to 20mm thick (table rubbed and polished) as in cooking platforms and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed by Engr-in-charge.

Rounding to the edge of stone slabs on edge such as cooking platform complete all as specified and directed by Engr-in-charge.

S&F in repair PVC (SWR) pipes single socketed110mm dia in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-charge.

S&F in repair PVC (SWR) bends 110mm dia any radius complete all as specified and directed by Engr-in-charge.

Dismantling and breaking up of old cast iron rain water, waste pipe, vent pipe of any description, jointed with any material complete all as specified and directed by Engr-in-charge.

S&F as in repair 75 mm bore cast iron drain/waste/vent pipes fixed to wall, floor jointed with led joints including dismantling of old cast iron drain, waste and vent pipe of any description, jointed with any material complete all as specified and directed by Engr-in-charge.

S&F as in repair 100 mm bore cast iron drain/waste/vent pipes fixed to walls or floor jointed with led joints including dismantling of old cast iron drain, waste and vent pipe of any description jointed with any material complete all as specified and directed by Engr-in-charge.

M&L as in repair for Cast iron door bends of 75 mm dia including dismantling old fittings complete all as specified and directed by Engr-in-charge.

M&L as in repair for Cast iron door bends of 100 mm dia including dismantling old fittings complete all as specified and directed by Engr-in-charge.

M&L as in repair for Cast iron branch pieces, tee equal or unequal spigot or socket type or with parallel branches to 75 mm dia pipe fitted with assess door including dismantling old fittings complete all as specified and directed by Engr-in-charge.

M&L as in repair for Cast iron branch pieces of 100 mm dia including dismantling old fittings complete all as specified and directed by Engr-in-charge.

M&L as in repair for 75mm dia of outlet cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 by using 20mm graded aggregate complete all as specified and directed by Engr-in-charge.

S&F in repairs tank of three layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I 500 ltr capacity including disconnecting existing tank and providing all necessary fittings for connecting with pipe line complete all as specified and directed by Engr-in-charge.

S&F in repairs tank of three layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I 1000 ltr capacity including disconnecting existing tank and providing all necessary fittings for connecting with pipe line complete all as specified and directed by Engr-in-charge.

S&F for PVC tank cover including cover to be fixed in frame with threading system, the frame to be fixed with tank by 4 Nos PVC nut bolts and araldite, the cover to be provided for 500/1000 ltrs capacity tank complete all as specified and directed by Engr-in-charge.

S&F in repair 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc complete all as specified and directed by Engr-in-charge.

S&F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 X 260 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe including lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed by Engr-in-charge.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) including connection to drain or outgoing pipe and flush pipe anti syphonage pipe etc complete and making good to floor complete all as specified and directed by Engr-in-charge.

S&F in repairs plastic WC seat cover of any colour for pedestal pan, closed pattern with flat bottom & cover including MS chromium plated, aluminium hinging devices complete all as specified and directed by Engr-in-charge.

S&F in repairs of Health Faucet with 1.5 mtr long SS tube and hook complete all as specified and directed by Engr-in-charge. Make :- Prayag/Jaquar/Volga

S&F in repairs of wash down water closet EWC floor/wall mounting with soft close seat cover and twine flush cistern fitting 520x360x390mm complete fix in repair complete all as specified and directed by Engr-in-charge. Make: Cera, Cat Part No s1059102 P trap 100mm or equivalent

S&F in repairs of PVC low level flushing cistern of 10 ltrs capacity with top push button inclusive of brackets and PVC bend long type and connecting to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and directed by Engr-in-charge.

S&F in repairs of wash hand basin of size 550 x 400 mm vitreous China white flat back including brackets, waste coupling & PVC waste pipe of 32 mm dia etc. complete all as specified and directed by Engr-in-charge.

S&F in repairs of 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ Sqcm fixed to wall or floor etc including fittings complete all as specified and directed by Engr-in-charge.

S&F in repairs of 15mm bore chromium plated Pillar cock shawn neck type screwed down high pressure, with or without lettered Hot ot Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed by Engr-in-charge. Make Prayag.

S&F in repairs of PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified and directed by Engr-in-charge.

S&F in repairs of 15 mm bore Angle stop valve cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-charge.

S&F in repairs of 15 mm dia bore concealed stop valves cast copper alloy chromium plated fancy type with long shank & cup (concealed type) complete all as specified and directed by Engr-in-charge.

S&F in repairs of 15 mm dia bore bib taps cast copper alloy with crutch and butterfly handle, screwed for iron pipe, or for brass ferrule complete all as specified and directed by Engr-in-charge.

S&F in repairs of PVC bath room cabinet with mirror of size 432 mm x 311 mm complete all as specified and directed by Engr-in-charge.

M&L for 75 mm thick cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in plinth protection/ path laid in panel surface finished even and fair complete all as specified and directed by Engr-in-charge.

M&L for cleaning, washing and applying two coats of indigo floor coat emulsion paint on old chequered tiles/interlocking tile surface of any description over 10 cm girth or width complete all as specified and directed by Engr-in-charge.

Taking up or down steel tubing and connection including cleaning for refixing or removal of bore 15 mm complete all as specified and directed by Engr-in-charge.

Taking up or down steel tubing and connection including cleaning for refixing or removal of bore 20 mm complete all as specified and directed by Engr-in-charge.

Refixing old steel tubing and connections in new or old position as in walls ceiling floors etc bore of pipe 15mm complete all as specified and directed by Engr-in-charge.

Refixing old steel tubing and connections in new or old position as in walls ceiling floors etc bore of pipe 20mm complete all as specified and directed by Engr-in-charge.

S&F 20 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls ceiling or laid in floors complete all as specified and directed by Engr-in-charge.

S&F 15 mm dia galvanized steel tubing, medium grade, with all fitting and fixed complete to walls ceiling or laid in floors complete all as specified and directed by Engr-in-charge.

S&F in repairs of Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe of 20 mm dia complete all as specified and directed by Engr-in-charge.

S&F in repairs of small fittings galvanised iron medium grade such as socket, elbow, nipple, tee, union, tank nipple, tank connection etc for 15mm bore pipe complete all as specified and directed by Engr-in-charge.

S&F in repairs of small fittings galvanised iron medium grade such as socket, elbow, nipple, tee, union, tank nipple, tank connection etc for 20mm bore pipe complete all as specified and directed by Engr-in-charge.

Demolition of the brick work built in cement mortar complete all as specified and directed by Engr-in-charge.

M&L for brick work with sub class 'B' bricks, straight of curved on plan exc 6M mean radius built in cement mortar (1:6) complete all as specified and directed by Engr-in-charge.

M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement all as specified and directed by Engr-in-charge. Note: The work to be executed at the height of 12 to 15 mtr the rate for necessary scaffolding deemed to be included in the quoted rate.

M&L for rendering 15mm thick in cement mortar (1:4) on other than fair faces of brick work or concrete surfaces in patches finished even & smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for preparation of old decorated plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc and applying one coat of white wash over a coat of white putty in patches as required complete all as specified and directed by Engr-in-charge.

M&L for preparation of old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc and applying one coat of oil bound distemper white or tinted over a coat of white putty in patches as required complete all as specified and directed by Engr-in-charge.

M&L for removal of old existing treatment of walls surfaces and applying coat of white cement base wall care putty in patches as required and as directed by Engr-in-Charge finished even and smooth with sand paper and applying two coats of exterior weather proof water base emulsion paint (APEX) in white or tinted complete all as specified and directed by Engr-in-charge. Note:- Quoted rate shall be deemed to be included for work in buildings/structure of any height.

M&L for preparation of old decorated plastered or unplastered surfaces of walls. ceiling, chajja by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc, washing rubbing down and stopping of previously untreated/painted surfaces and applying one coat of cement base paint, white or tinted complete all as specified and directed by Engr-in-charge. Note:- Quoted rate shall be deemed to be included for work in buildings/structure of any height.

M&L for preparation of old decorated plastered or unplastered surfaces of walls. ceiling, chajja by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc, washing rubbing down and stopping of previously untreated/painted surfaces and applying one coat of Colour Wash of any tinted complete all as specified and directed by Engr-in-charge. Note:- Quoted rate shall be deemed to be included for work in buildings/structure of any height.

M&L for preparation of old painted wooden surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-charge.

M&L for preparation of old painted steel surfaces of any description, over 10 CM in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-charge.

Rohan Construction Company

YOGESH ENTERPRISES

V r traders

ANAND ENTERPRISES

Neeraj Enterprises

akenterprises

M/S Delhi Engineering Co.

AMIR ENTERPRISES