Various Addition/Alteration work at Govt. Residential B.No. 7, Hospital Road, Jaipur. (Supply of Furniture)

Amount

Providing and arranging of Executive Table with Credenza Table size 2550x900x750mm, Right Credenza size 1500x600x750mm, Left Credenza size 900x450x600mm and Back Unit 1800x450x750mm as per following specifications. The table top of (w x d) 2550x900mm would be made in two parts out of 25mm thick MDF board One of the rectangular top is of (w x d) 1800x900mm and the remaining is of (w x d) 750x900mm Both the tops of table are laminated with 0.2mm thick membrane foil. The edges of the table are in quarter round shape. Reverse side of top is laminated in matching colour. The top is rested on one left side credenza & two pillars with modesty panel. The modesty panel of (wxh) 1800x725mm would be made out of 18mm thick MDF board. The modesty panel is grooved with CNC router for design purpose and then laminated with 0.2mm thick membrane foil. This type of design made with CNC router is possible only on MDF board. Thee pillars are also grooved with CNC router for design purpose. The bottom of table is provided with 75mm molding in membrane finish. Right Credenza of size (w x dxh) 1500x600x750mm is provided with table. The top of credenza would be made out of 25mm thick MDF board having density 500-800 Kg/m3. laminated with 0.2mm thick membrane foil. The edges of the top are in quarter round shape. Reverse side of top is laminated in matching colour. Side panels would be made out of 18mm thick particle board having density 600-900 Kg/m3 laminated with 0.7mm thick curvica laminate on one side. All edges are saled with 2mm thick PVC edge banding in matching colour. The back side of the side unit would be made out of 18mm thick MDF board having density 500-800 Kg/m3 It is grooved with CNC router for design purpose

and then laminated with 0.2mm thick membrane foil. Shutters of side unit would be made out of 18mm thick MDF board having density 600-900 Kg/m3 laminated with 0.2mm thick membrane foil. The edges of the shutter are in quarter round shape.

Reverse side of shutter is laminated in matching colour. All shelves would be made out of 18mm thick particle board having density 600-900 Kg/m3 laminated both side with 0.7mm thick curvica laminate. All edges are sealed with 2mm thick PVC edge banding. All drawers are mounted on steel telescopic channel. All drawers are provided with handles. It is space for CPU storage, Keyboard tray and footrest will be provided if needed (Optional) Left Credenza of size (w xdxh) 900x450x600mm is provided with table. The top of credenza would be made out of 25mm thick MDF board having density 500-800 Kg/m3, laminated with 0.2mm thick membrane foil. The edges of the top are in quarter round shape. Reverse side of top is laminated in matching colour. Side panels would be made out of 18mm thick particle board having density 600-900 Kg/m3 laminated with 0.7mm thick curvica laminate on one side. All edges are saled with 2mm thick PVC edge banding in matching colour. The back side of the side unit would be made out of 18mm thick MDF board having density 500-800 Kg/m3 It is grooved with CNC router for design purpose and then laminated with 0.2mm thick membrane foil. Shutters of side unit would be made out of 18mm thick MDF board having density 600-900 Kg/m3 laminated with 0.2mm thick membrane foil. The edges of the sliding shutter are in flat shape. Reverse side of shutter is laminated in matching colour. All shelves would be made out of 18mm thick particle board having density 600-900 Kg/m3 laminated both side with 0.7mm thick curvica laminate. All edges are sealed with 2mm thick PVC edge banding. Back Unit of size (w xdxh) 1800x450x750mm is provided with table.

The top of back unit would be made out of 25mm thick MDF board having density 500-800 Kg/m3, laminated with 0.2mm thick membrane foil. The edges of the top are in quarter round shape. Reverse side of top is laminated in matching colour. Side panels would be made out of 18mm thick particle board having density 600-900 Kg/m3 laminated with 0.7mm thick curvica laminate on one side. All edges are sealed with 2mm thick PVC edge banding in matching colour. The back side of the side unit would be made out of 18mm thick MDF board having density 500-800 Kg/m3 It is grooved with CNC router for design purpose and then laminated with 0.2mm thick membrane foil. Shutters of side unit would be made out of 18mm thick MDF board having density 600-900 Kg/m3 laminated with 0.2mm thick membrane foil. The edges of the shutter are in quarter round shape. Reverse side of shutter is laminated in matching colour. All shelves would be made out of 18mm thick particle board having density 600-900 Kg/m3 laminated both side with 0.7mm thick curvica laminate. All edges are sealed with 2mm thick PVC edge banding. All drawers are mounted on steel telescopic channel. All drawers are provided with handles. Entire unit made as per design & directed by Engineer-in-charge.

Supply and arranging Godrej make Leoma High Back Chair. The cushioned seat assembly shall consists of insert moulded polyurethane foam upholster with from laminated mesh fabric the insert moulded foam is assembled over a load bearing plastic seat cover. The back shall made up of two piece injection moulded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly size of back shall be (w)-48.5 cm, (H)-62.0 Cm and size of seat shall be (W)-52.50 cm x (D)-51.0 cm arm set shall be injection moulded with height adjustable up to 4.5+/- 0.5 cm in 3 steps and with adjustable up to 20mm. The neck rest assembly shall made up of polyurethane foam upholstered with form laminated mesh fabric. The neck rest assembly in mounted on the top of back. The chair shall be provided with pneumatic height adjustment which shall have stork of 9.0 +/- 0.3 cm. Complete in all respect as per design and approved by Engineer in Charge.

Supply and arranging of sofa Arm chair. The frame of the sofa shall be made of teak wood members round turned front legs made out of size 3"x3" with grooves and hard carving design with curved shape on the upper portion to blend with U Shape Mack (made from hard wood) and the rear legs to be is made out of 2½" x 2½" teak wood with grooves and curved shape with horizontal supporting members made out of size 4"x1½". The overall size of the sofa will be approx 30" wide x 36" high x 21" deep (Seat depth). The sofa will have 1000mm thick Foam Cushions (32 D) in seat (fixed over flat Zigzag spring) and 50mm thick Foam cushion in back and 50mm thick foam on arm rests covered with Tapestry cloth costing up to Rs. 500/- per meter. The sofa will be melamine polished in walnut shape complete in all respect as per design and sample approved by Engineer-in-charge.

Supply of Sofa Settee 3 Seater. The frame of the sofa shall be made of teak wood members round turned front legs made out of size 3"x3" with grooves and hard carving design with curved shape on the upper portion to blend with U shape back (made from Hardwood) and the rear legs to be is made out of 2½" x2½" teak wood with grooves and curved shape with horizontal supporting members made out of size 4"x1¼". The overall size of the sofa will have 100mm thick foam cushions (32D) in seat (Fixed over flat Zig Zag Spring) and 50mm thick foam cushion in back and 50mm thick foam on arm rests covered with tapestry cloth costing up to Rs. 500/- per meter. The sofa will be melamine polished in Walnut shade complete in all respect as per design and sample approved by Engineer-in-charge and client department.

Supply of Centre Table 12mm thick clear glass top, overall size 4'x2'x18". The glass will be set in wooden frame with oriental style moulding on the frame. The legs will be carved out of teak wood members of out of size 21/2"x 21/2" with horizontal members made out of size 3"x1" complete in all respect as per design and sample approved by Engineer-in-charge and client department.

Supply of Corner table 12mm thick Clear glass top overall size 2"x2"x1'6" The glass with be set in wooden frame with oriental style moulding on the frame. The legs will be carved out of teak wood members of out of size 21/2"x21/2" with horizontal members made out of size 3"x1" complete in all respect as per design and sample approved by Engineer-in-charge and client department

Supply of Executive table with side credenza table size 1800x900x750mm side credenza size 900x450x625mm as per following specifications :- Main Table & Top Surface- The main Table of size 1800x900x750mm with the top surface made out of 25mm thick particle board with half round/duck nose shape post forming on front and the rear side and the rest of the sides edge banded with 1.5mm thick matching colour VC edge banding and balancing laminate of matching colour on the reverse side. Side Credenza The side Credenza of size 900x450x625mm as per approved drawing and sample top Surface made out of 25mm thick particle board post formed and laminated with balancing laminate on reverse side and 1.5mm thick matching colour edge banding on the other two sides. Drawer Unit The drawer unit of size 725x450x450mm (HxWxD) made out of 18mm thick pre-laminated board having three number of drawer units, the two top units of 6" depth each and the bottom drawer of 15" depth. The front shutters matching with top surface in quarter round post formed shutters and mounted on steel telescopic channels including necessary hardware handles locks. etc. Accessories - One No. of computer keyboard tray fixed on wheel channels as per drawings. The entire unit is complete in all respects and made as per design and as directed by Engineer-in-charge.

Supply of Peacock type Knockdown wooden office with arm computer chair. The wooden are moulded venire, lumber in natural finish. The seat and back made with banyan foam superior quality upholster with leatherette finish. The back height 83 cm width 54 cm, depth 56 cm seat height 45cm. the seat and back having 1" thick height density U foam (40 density) complete as per approved sample by engineer in charge.