REPAIR MAINT FENCING TROLLY GATE ROLLING GATES BARBED WIRE INCLUDING CERTAIN MISC WORKS AT CERTAIN LOCATIONS IN TECH AREA UNDER GE AF TECH AREA AGRA

Amount

Demolition of un-reinforced cement concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed

Removing excavated materials rock/ concrete exc 1.50 Km but not exc 5.00 km and deposited where directed etc complete all as specified and as directed.

M&L hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface etc complete all as specified and directed.

Supply and laying dry clean sand including spreading, leveling in layers 50mm thick consolidated etc complete all as specified and directed. Note: Sand for filling shall 1.18mm single size and sand shall pass 100% through 2.36mm sieve and shall be 100% retain on 600 micron sieve

M & L for Polythene film (transparent colour) in single layer of 400 micron thickness, virgin quality as per ASTM D2103/IS 2508 laid over sand layer with side and end overlapping not less than 150mm etc complete all as specified and as directed. Note:- (a) Measurement shall be taken for net area and unit rate quoted shall be deemed to include over lapping. (b):- Sand layer will be measured and paid separately under relevant item of this schedule

M&L for providing (PQC) pavement quality concrete of any thickness as per design mix having minimum flexural strength of 44kg/sqcm in field using minimum 400 kg of cement per cum and including mixing of non circular/triangular synthetic fiber as per manufacture instruction concrete to be laid to level gradient and camber using paver including all lateral support and form work complete all as specified and directed Note: Non circular/triangular fiber to be measures and paid separately at supply only rate

Supply only polyster non circular/ triangular synthetic fibers 6/12mm long with circum circle diameter 30-35 micron design for melting point 240-260 degree celcius and having specific gravity of 1.34 to 1.4 recon etc complete all as specified and as directed.

Dismantling of , fencing wire mesh,of any size & nature etc complete all as specified and directed.

Dismantaling posts/struts (wood/steel or R.C.C.) any section including taking out embeded portion and making good disturbed ground in natural ground etc complete all as specified and directed by Engr-in-Charge.

Excavating in post holes (or similar holes) each n. exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good disturb surface in hard/dense soil/concrete etc complete all as specified and directed .

M&L for Providing cement concrete type D-2, 1:4:8 ( using 40mm graded aggregate) as in foundation, filling and mass concrete etc complete all as specified and directed.

M&L for mild steel work as in posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) and similar work conforming to Fe 290 Gde E-165 including all necessary bolting or riveting and spot welding etc complete all as specified and directed.

S&F in repair Galvanised, 2 strand, steel barbed wire 2.24 mm dia, barbed with 2 mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and directed (each line of wire to be measured)

S&F screw bolts (machine made) galvanised with hexagonal or square heads at one end and screwed the other to be fitted with washers and one hexagonal or square nuts, n. exc 5cm long , diameter of neck 5 to 10mm etc complete all as specified and directed.

Supply only chain link fencing mild steel galvanised fencing any size and type (size of mesh and dia of wire as directed by Engg-in-charge) etc complete all as specified and directed

Fixing only chain link fencing of any type fixed to RCC / steel post with mild steel flat & nut bolt etc complete all as specified and directed. Note: (i) Supply only fencing, will be measured and paid separately. (ii) Supply and fix mild steel nut bolt, line wire and flat will be measured and paid separately.

S&F Mild steel round bars 10mm dia and over as in strengthning bars for chain link fencing conforming to Fe-290 Gde E-165 etc complete all as specified and directed.

S&F in repair concertina coil 1050mm dia ( in stretched position), hot dip galvanised steel wire coated with CLR anti corrosive paint, making diamond shape with the help of dove tail clips( 18 SWG), fixed to the MS angle iron/precast RCC fencing post with and including binding wire complete all as specified and directed.

Dismantling structural steel work including doors, gates framed trusses or similar steel work etc complete all as specified and directed.

S&F mild steel framed work such as grills gratings / cattle trap/ trolley gate/ railings/rails etc with ends of bars shouldered and / or riveted or forged into spiked framed guard bars, barred iron doors, ladders, framed blasters, walkways railings framework of water tanks and similar work conforming to Fe 290 Grade E-165 etc complete all as specified and directed.

S&F in repair double flanged cast iron bottom wheel of any dia 75 mm thick including necessary cutting of surclip groove, bearing groove and boost groove with and including fixing to shaft with nuts and bolts of any dia complete with two bearing at each side of wheel and necessary fittings complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth, not otherwise described and apply two coat of synthetic enamel paint over one coat of red oxide primer etc complete all as specified and directed.

M & L for prepararing old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not exc 10 cm width or girth, not otherwise described and apply two coat of synthetic enamel paint over one coat of red oxide primer etc complete all as specified and directed.

M&L for welding in repair exc 2.5 cm but n.exc 5cm in length, thickness of metal to be welded n.exc 6mm complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in mass concrete/ base of paving complete all as specified and directed.

S&F expanded metal, not exceeding 4 kg per Sqm in weight, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.90mm dia or fixing with galvanised steel staples fixed complete to wood or iron members complete all as specified and directed.

M&L for securing or easing, cleaning/greasing/oiling/ overoiling/welding in gear box, crank handle, rolling spring, channels, ball bearing, pully,wheels, adjustment of lock device etc, & any description each complete all as specified and directed..

M&L for Providing and laying factory made kerb stone of M-25 grade of any size in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required including dismantling/demolition of existing complete all as specified and directed

M&L for preparation of new concrete surfaces and applying two coats of exterior emulsion paint with one coat of primer in normal pattern as per manufacturers instructions etc complete all as specified and directed by Engr-in-charge.

Captainkomalchaharconstructions (BID ID -3134525)

Abhi Construction (BID ID -3141816)