8785/GWL/E8 COMPREHENSIVE REPAIR / REPLACEMENT TO PREVENT THE LEAKAGE/SEEPAGE IN VARIOUS BLDGS IN THE AREA OF AGE B/R-I UNDER GE GWALIOR

Amount

Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 15mm bore of pipe, complete all as specified and directed.

Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 20mm bore of pipe, complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removing to store of 25mm bore of pipe, complete all as specified and directed.

Supply and laying 15 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall or laid in floors complete all as specified and as directed

supply and laying 20 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall or laid in floors complete all as specified and as directed

supply and laying 25 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall or laid in floors complete all as specified and as directed

S&F, 15mm bore tubes medium grade galvanised with all fitting and fixed to walls and ceiling or laid in floor etc complete all as specified and as directed

S&F, 20 mm bore tubes medium grade galvanised with all fitting and fixed to walls and ceiling or laid in floor etc complete all as specified and as directed

S&F, 25 mm bore tubes medium grade galvanised with all fitting and fixed to walls and ceiling or laid in floor etc complete all as specified and as directed

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for vitrified, light coloured and printed tiles of 8 to 10 mm thick (Square / Rectangular ) polished area of each tiles not exceeding 0.36 Sqm as in flooring over and including 15 mm thick cement screed in CM (1:4 ) set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L for vitrified, light coloured and printed tiles of width as directed and 8 to 9 mm thick as in skirting fixed over and including 10 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L for non skid ceramic tiles, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set over and including 15 mm thick cement screed in (1:4) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L for ceramic tiles, coloured tiles 7mm to 8 mm mm thick as in skirting fixed over and including 10 mm thick cement screed in (1:3) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.with the colour of tiles complete all as specified and directed.

M&L for digital glazed ceramic tiles, coloured tiles 300mm x 450mm x 7mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:3) complete all as specified and directed.

Demolition of brick work /stone work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) in any postion complete all as specified and as directed.

M& L for Brick work with sub-class `B' bricks, straight or curved on plan to any radius, in half brick work built in cement mortar 1:4 complete all as specified and as directed.

Taking down cement or cement lime plaster on brick or stone walls etc. including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed

M&L for rendering 15 mm thick in CM 1:6 over brick wall, concrete surfaces, finished even and smooth (without using extra cement) all as specified and as directed.

M&L for 15 mm thick rendering on brick wall surfaces in CM 1:4 finished fair and even with WPC treatment all as specified and as directed. (Note:- WPC shall be measured separtly)

M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed.

S&F chicken wire mesh with tack screws of galvanised mild steel wire cloth of 0.56mm nominal dia of wire and average width of aperature 1.18mm all as specified and directed.

Cutting out cracks to 'V' section in existing roofs or tarracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and as directed.

Supply only water proofing compound (ISI Mark) complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of walls & applying two coat of oil bound distemper on wall surfaces complete all as specified and directed.

M&L for 1mm thick wall care putty on wall complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of ceiling & applying 3 coats of white wash on ceiling surfaces complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of walls & applying two coat of cement based paint over a coat of primer complete all as specified and directed.

Preparation of old decorated surface of ceiling and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and applying one coat of white wash complete all as specified and directed.

Preparation of old decorated surface of wall and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and M&L for one coats of distemper oil emlusion white or tinted complete all as specified and directed

Taking down Chowkats or frames not exceeding 1.5 sqm each (Without taking off shutters from the frames) complete all as specified and directed.

Supply & Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specification & drawings complete all as specified and as directed.

S &F for factory made solid panel PVC door shutter 30mm thick ( style) consisting to frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Penelling of plain colour PVC sheet to be fitted in the MS. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and as directed.

M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors , windows , ventilators, partitions etc with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L for repair Aluminum door of any type & any size, taking down and re-fixing including all small accessories (like handle, gaskit, hinges, tower bolt, door stopper etc) Complete all as specified and directed. Note : Glass & Particle board ect shall be paid separately.

M&L for repair Aluminum window of any type & any size, taking down & refixing including all small accessories (like handle, rubber/gaskit, hinges, tower bolt, door stopper etc) Complete all as specified and directed Note : Glass & Particle board ect shall be paid separately.

S&F for aluminium alloy butt hinges of 100mm size complete all as specified and directed.

S&F for Extruded aluminium alloy handle of 150 mm size fabricated type, anodised complete all as specified and directed.

S&F for aluminium anodised barrel tower bolt of 150mm of extruded section complete all as specified and directed.

S&F for aluminium alloy anodised sliding door bolt of 250mm with haps, staple ( bolt type ) & fixing clips of sheet ,cast or extruted sections and fixing bolts and slinding bolts of extruded sections complete all as specified and directed.

S&F in repair for 3mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane including hacking out old broken glass of any thickness and any description from wooden/ steel frame/ stone,concrete or brick surrounds complete all as specified and directed.

S&F in repair 3mm thick, figured glass pin head type and glazing with oil putty,silicone or wooden beads, in square not exceeding 0.5 sqm in each pane including hacking out old broken glass of any thickness and any description from wooden/ steel frame/ stone,concrete or brick surrounds complete all as specified and directed.

S&F in repair galvanised wire cloth, .56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised staples complete all as specified and directed

S&F for door closer hydraulically regulated, designation No. 3, universal type, aluminium die-cast body (ISI Marked), suitable for door shutters of 851 to 1000 mm in width and of weight between 36 to 60 kg and fixed in repair complete all as specified and directed

S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F for in repairs floor door stopper of aluminium alloy body and tongue ,anodised with hard drawn steel spring,150mm long, fixed in floor complete all as specified and directed.

Dismantling boarding any description fixed with nails in any position (including cup board shutter/shelve upto 25mm thick/any type of partition etc) complete all as specified and directed..

S&F for 18 mm thick prelaminated particle board exterior grade prelamilated one side with decorative choice lamination and other side balancing white lamination fixed with screws complete all as specified and directed.

S&F for continuous (piano) hinges mild steel bright finish or electro galvanised width of width of flaps nexc 30 mm (when open), complete all as specified and directed.

S&F for magnate catcher of metal body and striking plate heavy duty includind fixed with screw, complete all as specified and directed.

S&F for PVC bath room cabinate mirror of Size 500mmx400 mm make Prayag complete all as specified and directed.

S&F in reapir 25mm dia anodised aluminium alloy curtain rod not less than 0.80mm thick including fixing of sufficient brackets ( minium 2 nos at every 1.50m length) and decorative end knobs complete all as specified and directed

Dismantling of asbestos cement (corrugated, semi-corrugated) etc sheets in roof covering including ridges etc complete all as directed.

S & F for pre-painted galvalume aluminum zinc coating GI based double ribbed trapezoidal profile steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S & F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified directed.

Dismantling structural steel work of any description and in any position including doors, gates but excluding framed truss etc. complete all as specified and directed.

S&F rolled sections Fe-290 (Gde E-165) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running railsand guides for sliding doors; fixed with angle cleats or other connecting plates, wind tie, trush etc complete all as specified and as directed.

M&L for applying for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified and directed.

M&L for Dismantling of AC ceiling board any descrition complete all as specified and directed.

S& F in repair, E grid frame work for false ceiling consists of GI angle 25x25x1.5 mm and Tee 38x25x1.5 mm of size and grid 605x605 mm complete all as specified and directed.

S&F, in repair 4 mm thick HPSC pre-prime non asbestos fibre cement building board decorative finish, fixed to aluminum /CGI frame work with hold down clips in false ceiling complete all as specified and directed.

Taking down exiting tarfelt with cement plaster on roof including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed

M & L Plain cement concrete (1:2:4) type B0 using 12.5 mm graded stone agg as levelling course/mass concrete/edge of pathway etc complete all as specified and directed.

M&L 10 mm thick rendring with CM (1:3) over roof etc surface surface even and smooth with with WPC treatment all as specified and as directed. (Note:- WPC shall be measured separtly)

M&L for two coat of acrylic cementitious water proofing coating (Dr FIXITpidifin 2k manufactured by M/s Pidilite Industries Ltd or equivalent) and followed by a overlay protective screed (10mm thick cement mortar (1:4) along with liquid water proofing compound approved make as per manufacturer's instructions)

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified complete all as specified and directed with following descriptions : - (a) Applying evenly a coat of bitumen primer confirming to IS 3384-1965 @ 0.30 kg/sqm. (b) Laying of APP modified membrane with 100 mm over lap in longitudinal direction and 100 mm in transverse direction.

M& L for applying aluminium paint for roof top surfaces of any description, not otherwise descri-bed, over 10cm width or girth complete all as specified and directed

M & L for cement concrete tiles 25cm x 25xm x20-22mm thick, machine pressed; set, jointed and pointed in net cement slurry in floors, and cut and polished, rubber moulded with grey cement and no pigment over and including 15 mm thick scrred bed in CM 1:4 complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories) complete all as specified.

S&F for 110mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and directed.

S&F, 110 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F for 75 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls. complete all as specified and directed.

S&F for 75 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,laid in trenches or in floors complete all as specified and directed.

S&F for 110mm dia PVC (SWR) pipes bends any radious \ complete all as specified and directed.

S&F for 75 mm dia PVC(SWR)pipes bends any radious. complete, complete all as specified and directed.

S&F for 110mm dia PVC(SWR)pipes junction,single (single T/Y ) equal or unequal any radious.with acces door, complete all as specified and directed.

S&F for 110mm dia PVC(SWR) vent cowl, complete all as specified and directed.

M&L for 75 mm dia of out let PVC (SWR) floor trap plain with CP grating including jointing with solvent cement as in repair complete all specified.

M&L for PVC (SWR) gully trap 125 /100 plain with grating incl. jointing with solvent cement as in repair, complete all as specified and directed.

S&F in repair sinks with drainage board made out of stainless steel 1 mm thick kitchen or laboratory with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed .

S & F in repair for plate rack made out of 1 mm thick stainless steel of size 90 Cm X 75 Cm X 25 Cm with all internal fittings and compartments/ partitions all as per sample B-347 Of Prayag or equivelent in other make all as specified and directed.

M&L for carrying out sunken floor (area n.exc 0.75 Sqm) treatment in the following stages - (i) Taking down of existing sunken slab treatment from the sunken portion and cleaning the surfaces washing down with water and rubbish of the pemises , cleaning and filling cracks with sealing compound, brushing neat cement slurry @ 3.00kg/sqm and grouting 25mm thick cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate on sunken slab portion and finishing the top surfaces even and smooth without using extra cement. (ii) M&L for two coat of acrylic cementitious water proofing coating (Dr FIXITpidifin 2k manufactured by M/s Pidilite Industries Ltd or equivalent) and followed by a overlay protective screed (10mm thick cement mortar (1:4) along with liquid water proofing compound approved make as per manufacturer's instructions) (iii) PCC 1:5:10 for filling in the sunken portion. (iv) Concrete for Sunken Slab shall be mixed with WP compound as per manufacture Instructions. (v) Floor Trap, grating, bends, tees of PVC/CI pipes shall be properly replaced in Heavy grade PVC pipe (Finolex/Suprim) and sealed with Sealing Compound. (vi) P/S traps and nahani/floor traps with long arms shall be replaced and provided as per direction of Engineer-in-charge. (vii) Testing of all traps, joints and sunken slab shall be as per IS : 1742 before filling of Sunken Slab including smoke test. (viii) After filling of Sunken floor making good as per Old FFL with floor tile

M&L for carrying out sunken floor (area exc 0.75 Sqm but n.exc 1.5 Sqm ) treatment in the following stages - (i) Taking down of existing sunken slab treatment from the sunken portion and cleaning the surfaces washing down with water and rubbish of the pemises , cleaning and filling cracks with sealing compound, brushing neat cement slurry @ 3.00kg/sqm and grouting 25mm thick cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate on sunken slab portion and finishing the top surfaces even and smooth without using extra cement. (ii) M&L for two coat of acrylic cementitious water proofing coating (Dr FIXITpidifin 2k manufactured by M/s Pidilite Industries Ltd or equivalent) and followed by a overlay protective screed (10mm thick cement mortar (1:4) along with liquid water proofing compound approved make as per manufacturer's instructions) (iii) PCC 1:5:10 for filling in the sunken portion. (iv) Concrete for Sunken Slab shall be mixed with WP compound as per manufacture Instructions. (v) Floor Trap, grating, bends, tees of PVC/CI pipes shall be properly replaced in Heavy grade PVC pipe (Finolex/Suprim) and sealed with Sealing Compound. (vi) P/S traps and nahani/floor traps with long arms shall be replaced and provided as per direction of Engineer-in-charge. (vii) Testing of all traps, joints and sunken slab shall be as per IS : 1742 before filling of Sunken Slab including smoke test. (viii) After filling of Sunken floor making good as per Old FFL.

Dismantling water tanks of any description and in any position , of capacity exceeding 250 litres but not exceeding 500 litres complete all as specified and directed.

Dismantling water tanks of any description and in any position , of capacity exceeding 500 litres but not exceeding 1000 litres complete all as specified and directed.

S & F Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, triplr layer in construction white in colour hoisted and fixed in position complete all as specified and directed.

S & F Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, triplr layer in construction white in colour hoisted and fixed in position complete all as specified and directed.

S&F for 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 m m - 210 gms / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S&F for as in repair 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed 20mm dia of pipe . (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S&F for in repair gun metal globe / gate value with iron wheel head screwed both ends for iron pipe of 20mm bore, complete all as specified and directed.

S&F for in repair gun metal globe / gate value with iron wheel head screwed both ends for iron pipe of 25mm bore, complete all as specified and directed.

S&F for in repairs Soap dish of CP fixed with pvc rawal plugs and screw, complete all as specified and directed.

S&F for in repair CP tubular towel rail D type 20mm dia and 60cm long complete all as specified and directed.

S&F for peg set of six S.S. fixed to wall with PVC plugs and screw, complete all as specified and directed.

M&L for vitreous china squatting pan, orissa pattern sise 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe to complete fixed in repairs and making good to floor, complete all as specified and directed.

S&F for in repairs of vitreous china wash basin, white, flat back, size 550 x 400mm Including waste coupling ,waste pipe and labour for fixing pillar tap ,pvc connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed. Note : Pillar tap and PVC connections will be measured paid separetly.

S&F for in repair PVC valveless syphonic action type flushing cistern low level white with inlet ball valve,float end handle handle including bracket complete of capacity 10 litres, complete all as specified and directed.

S& F 15mm dia PVC connection with PTMT nuts of length 450 mm, complete all as specified and directed.

S&F for in repairs Brass CP WHB mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed.

S&F in repair flushing jet spray for pedestal pattern EWC including 1 mtr long flexible pipe and brass chromium plated nuts etc complete all as spd and directed

S&F in repair Health faucet with 1.00 metre tube ( Branded tube ) including flexible pipe and brass chromium plated nuts completed all as specfied and directed.

S&F 15mm Bore CP Wall mixer 3 in 1 ( provision of OH shower and hand shower) Cat No 9280 of pryag or equivenet make complete all as specified and directed

S&F for in repairs mild steel Chromium plated grating 100 mm dia, fixed in repair, complete all as specified and directed.

S&F Providing PVC SHEET WALL PANELLING of thickness 5mm ( ±0.25 ) consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm (±0.25 ) thick Prelam PVC sheet. The panel & strips shall be Density of 600 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company. The strips should have in their center a grove of 6mm width and 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10” between two PVC strips. The PVC strips shall be fixed to the wall using 65mm long M.S. screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm ( ±0.25 ) thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cemenSolid PVC Wall Lining consisting of 5 mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and as directed by engineer-in-charge.

S&F Providing Kitchen Cabinet in required sizes (180x0.75x.60mm) at site made out of 18mm thick one side decorative lamination & other side balancing lamination sheet consisting of carcass 18 mm thick PVC sheet & provision of shutters made out of 18 mm thick one side decorative laminated PVC sheet all required brackets SS screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2 mm thick edge bonding tape or 900 edge bent finish as per make and specification mentioned as per drawing and specification approved by engineer-in-charge

S&F for in repairs vitreous china urinals, Half stall type ,white with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

S&F for as in repair viterous china wash down water closet pan (pedestal pattern), white, excluding fixing bolts, flushing cistern and flush pipe including connection to drain and to flushing pipe syphonage pipe etc and mild steel chromium plated or aluminised hinges device & on CP Jet complete all as specified and directed.

S&F in reapir plastic water closet seat covered white coloured closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging devise complete all as specified and directed.

S&F for in repairs PVC Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm 125gms complete all as specified and directed.

S&F in repair for in repairs15mm,pillar taps fancy type long body chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified and directed .

S&F for in repairs 15mm angle cock chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified and directed.

S&F in repair for 15mm, bib tap Fancy type long body chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified and directed.

S&F in repair shower rose brass chromium plated without swivel joints, 100 mm in size including fixing to steel pipe complete all as specified and directed.

S&F in repair Stop valve cast copper alloy screwed down high pressure with CAPSTON HEAD handle chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe 15mm bore or for unions complete all as specified and directed.

M/S YOGANSH CONSTRUCTION CO.

M.S. ENGINEERS

M/s Ratan Lal Jain and Co.

mahamaya constructions

M/s KGN Builders

Sunil Traders

M/s Subhash Construction Co.

Shree Jee Associates

M/s J.B. Construction

M/S MAHAVIR SINGH