SPECIAL REPAIR TO BLDG NO T-432 OF G COY AT SILA GARRISON UNDER AGE (I) CIF (U) REASI

Amount

M&L Brick work with sub class 'B' bricks, straight or curved on plan in CM 1:6 complete all as specified and directed.

M&L 40mm thick damp proof course to horizontal or vertical surfaces in cement concrete 1:2:4, type B-0 using WPC including necessary formwork complete all as specified and directed. Note:- WPC shall be measured and paid separately.

Apply evenly a coat of blown type bitumen at the rate of 1.50 Kg per sqm and blinding with clean sand @0.05cum per sqm complete all as specified and directed.

Polythene film, 50 micron thick, laid on a coat of bitumen primer @ 0.30 to 0.50 Kg per sqm complete all as specified and directed.

Rendering10mm thick on other than fair faces of brick work or stone surfaces in CM 1:6 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

Rendering 15 mm thick on other than fair faces of walls of brick work or concrete surfaces in cement mortar 1:4 with water proofing compound finished fair and smooth complete all as specified and as directed. Note: Water proofing compound shall be measured separately.

Rendering 05 mm thick cement plaster in CM 1:3 on brick or concrete surfaces of soffits of chajja, roof projections or ceiling and finished even and smooth without using extra cement complete all as specified and as directed.

M&L Preparation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over one coat of primer including birla putty 1mm thick complete all as specified and directed.

M&L for preparing the external newly plastered surfaces of walls and applying two coat of Cement base paint over one coat of alkali resistant priming paint complete all as specified and directed.

Preparation of old or previously treated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of Synthetic enamel paint complete all as specified and directed.

S & F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Ditto as per item No. 12 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L reinforced cement concrete design mix M-25 grade (using 20mm graded aggregates) as in beams complete all as specifed and directed.

M&L reinforced cement concrete design mix M-25 grade (using 20mm graded aggregates) as in chajjas complete all as specifed and directed.

M&L Formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc complete all as specified and directed.

Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4.00 Sqm each (without taking off shutters from the frame) complete all as specified and directed.

S & F Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 125x60mm including tarring ends and back of chowkats and lugs including back filling of PCC 1:3:6 for chowkats & PCC 1:2:4 for block for hold fast including two coats of synthetic enamel paint over a coat of red oxide primer on exposed surfaces complete all as specified and directed

S&F Factory made Solid PVC Moulded Door Shutter(with particle board core), 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC sheet on the back face complete as per specification & all as specified and directed.

S & F 35mm thick, 2nd class hard wood glazed and skelton shutter, open rebated and prepared to receive glass, gauze etc(without sash bars) edges of framming plain , chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR PART I Section 8 clause 8.24(a) supplied and fitted to chowkhat complete.

Preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of Synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S & F Steel windows/ventilator with tubular frame factory made with double shutter (wire gauzed shutter & glass/glazed shutter, (wire cloth and glass panes shall be measured and paid separately) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron including box type hinges with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolt 100mm long and 10mm square bar grills complete, two coats of synthetic enamel paint over one coat of red oxide primer including taking down old windows/ventilators complete all as specified & as shown on drg .CEUZ/TD/1269/2008 Sheet 1/1 to 1/3.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.5 sqm in each pane all as specified and directed.

S&F aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed

S&F 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F Aluminium anodised handle extruded sections of size 150mm complete all as specified and directed

Aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

Aluminium anodised barrel tower bolts extruded section of size 200mm complete all as specified and directed

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl 20mm thick screed bed/bedding layers in CM 1:3 complete all as specified and directed.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L makrana white marble tiles 30cmx20cm x20mm thick machine cut, bedded jointed and pointed with grey cement slurry including cutting and polishing types incl cement mortar bedding 20mm thick in CM 1:4 complete all as specified & directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M & L Sand filling under floors or in foundation including watering and consolidation complete all as spd and directed.

M & L 75mm thick Cement concrete PCC 1:4:8 type D2 using 40mm graded crushed stone aggregates as in sub base complete all as specified and directed.

S & F Machine pressed precast concrete coloured interlocking paver block any shape and size and conforming IS 15658-2006 of 60mm thickness M-35 grade complete all as specified and directed.

M&L for Cement concrete 1:3:6 type C-2 (using 20mm graded agg) as in plinth protection, 50mm thick and finished even and smooth without using extra cement all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness and type, including cover fillets complete as directed by the Eng in charge

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. (Size of grid 605X605 mm) complete all as specified and directed.

S&F Non asbestos 12mm fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Roof trusses (framed) trussed, purlin, crane gantries, plate, rail and fastening and heavy brackets framing ( Beams, Tee, angle, channel or flat section) incl. distance pieces, cleat etc. conforming to Fe-410-W (Gde-E-250) quality B all as specified and directed.

Preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of Synthetic enamel paint over one coat of red oxide zinc chromre primer complete all as specified and directed.

S&F in repairs fancy type stainless steel Drapery rods 19/20 mm bore for curtain rails with fixing stainless steel brackets, fancy stainless steel stops and curtain rings (06 Nos per mtr) complete all as specified and directed .

Supply only liquid water proofing compound complete all as specified and directed. (Make:- Dr. Fixit, Pidilite or equivalent in approved make).

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete (fittings such as switches, ceiling roses, pendants, regulators, sockets etc. to be measured separately), removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc all as specified and directed.

M&L for point wiring concealed complete with FRLS PVC insulated unsheathed 1100 volts grade, conforming to IS-694, 1.5 Sqmm (nominal area) multi stranded copper conductor cable drawn through in including non metallic medium grade rigid PVC conduit ISI marked, 19/20 dia including all accessories on the surfaces of walls/ floors/ceiling and making good the disturbed surfaces, with and including sunken type pressed steel welded MS terminal box 1.2mm thick bakelite laminated sheet top cover 3mm thick and 1.5 Sqmm copper earth continuity wire connected to earth dolly complete for one light point/fan point/exhaust point controlled by one switch complete all as specified and directed by Engineer in charge.

Description all as per item no. 52 above but for one 3/5 pin socket outlet, 5 amps, independent, with cables 1.5 sqmm size with 1.5 sqmm copper conductor cable green in colour as earth continuity conductor connected to main earthing.

Description all as per item no. 52 above but for one 3/5 pin socket outlet, 5 amps, on the same board with other switches, with cables 1.5 sqmm size with 1.5 sqmm copper conductor cable green in colour as earth continuity conductor connected to main earthing.

Description all as per item no. 52 above but for one 3/5 pin socket outlet, 15 amps, independent, with cables 2.5 sqmm size with 2.5 sqmm copper conductor cable green in colour as earth continuity conductor connected to main earthing.

S&F LED flourescent tube light fitting 1 x 20 W, indoor decorative aluminium extruded T5 LED batten integrated type, white complete with all accessories with twin core twisted flexible copper conductor cable with suitable size all as specified and directed. Make:- C&S, Model:- Nakshatra/20W/W, Cat Part No:- LTTB4F20WLED/W- 4 Ft white or equivalent in Bajaj/Havells/CG.

S&F Lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings including 10W LED lamp in white colour with maximum output (LM) 950, 10 Watt, base Cap- B22 complete all as specified and directed. Make of LED Lamp:- Havells, Cat Part No :- LED ADORE 10W B22 CDL BALL LAMP LHLDEUEEML8R010 or equivalent in Bajaj/Philips/CG.

S&F 1 x 10 W LED bulk head luminaires, IP65 LED Bulk Head in engineering plastic housing with clear prismatic diffuser with lamp holders etc complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 Hz. Make:- C&S e-TARTA Series Cat Part No :- e-TARTA/10 Watt CG80IB10WLED White or equivalent in Bajaj/Havells/CG.

S&F switch piano flush type button single pole one way 5 Amps 230V complete all as specified.

S&F ceiling rose, PVC/Polycarbonate, isolated body surface type 65mm dia, three terminals, three phase 230V complete all as specified.

S&F switch socket combination 2 in 1, 5 pin, 5 Amp flush type universal, complete all as specified.

S&F switch socket combination 2 in 1, 5 pin, 5 and 15 Amp flush type universal, complete all as specified.

S&F in replacement for MCB single pole and neutral 32 Amps, 240 V, complete all as specified.

S&F in replacement for MCB single pole 6 to 32 Amps, 240 V, complete all as specified.

S&F sheet metal enclosure for DBs double door when MCBs to be used single pole and neutral 8 way 240V with 200 Amps rated bus bar, complete all as specified and directed.

Taking down the existing ceiling fans and re-fixing/hanging the same in position including provision of cable from ceiling rose and connecting to fan complete all as specified and directed.

S&F new stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required including taking down old unserviceable electronic fan regulator for 1200/1400mm sweep complete all as specified and directed by Engineer in charge.

S&F in replacement new LED street light luminaires in a single piece, IP 65 powder coated pressure die cast aluminium SMD LED street light with heat resistant toughened glass, 45 watt, having LED in built control gear including upto 2.5 mtr twin core conductor for connection of street light fitting from LT OH line/ ceiling rose including taking down old unserviceable street lights all as specified and directed by Engineer in charge. Make:- C&S, Cat Part No. INDUS-i/45W, LTESSI45WLED or equivalent in Philips/CG/Havells/Bajaj/Wipro.

S&F in replacement with new bracket for street light fitting made out of GI tubing 50mm medium grade pipe 2' x 1-1/2' 135 degree bend with cutting, welding and two MS bracket with nut bolts and washer including bracing to pole/on fencing and taking down old unserviceable brackets all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (Earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connecting to the galvanised iron earth lead wire of 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and earth strip protected by provision of GI light grade pipe 20mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20mm graded stone aggregates with XPM(weight not less than 4kg/sqm) and frame of angle iron 25x25x6mm with lugs 2 Nos and with 20mm bore pipe for watering, perforated at bottom 1.75mtr long placed on top edge of earth plate, common salt and charcoal filling, test point made out of 40mm/6mm flat iron with fixing arrangement funnel wire mesh and earth work in hard dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electrical plate No 03 of SSR-2009 Part-I and connecting to earth test point all as specified and directed including testing on completion.

S&F wiring in PVC conduit for circuit/sub main wiring of size 2 x 6.0Sqmm alongwith earth wire of size 1 x 6.0 Sqmm earthing green color of FR PVC insulated copper conductor, single core cable in surface/recessed as required complete all as specified and directed by Engineer in charge.

Supplying or laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium stranded conductor, served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed in service connections of size 16 Sqmm, 2 core including taking down old unserviceable service cable complete all as specified and directed by Engineer in charge.

Supply laying, jointing and testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 25 Sqmm 4 core laid in trenches passing through pipe/ ducts/ surface of wall ceiling etc including testing after laying, complete all as specified.

Excavation in trenches, in soft loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth , laying of cable or pipes (where provided for protection of cable) etc and getting out, trimming the sides, forming bottom surfaces to required level, complete all as specified and directed.

M & L for sand cushioning with a layer of sand 8cm thick before laying of cable and 15cm thick after laying of cable in trenches, complete all as specified and directed.

Supply and laying of well burnt bricks, sub class 'B' laid flat in trenches for protection of cable, complete all as specified and directed.

Returning and filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick, complete all as specified and directed by Engr-in-Charge.

Removing of surplus soil to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified.

S & F of galvanised steel tube light grade of 50 mm bore with all fittings for cable protection, laid in trenches, fixed to wall or on pole including necesarry clamps sets and nut & bolts, complete all as specified and directed by Engr-in-Charge.

Design, supply, installation, testing and commissioning of LT outdoor type feeder pillar box, factory fabricated, cubical kiosk type of size 0.6 x 0.6 x 0.4m weather vermin proof with IP-65, CPRI approved with locking arrangement and made out of MS sheet 3.15mm thick suitable size of channel for base complete with 100 Amps rated copper bus bar (04 Nos) chamber including adequate Nos of cable gland of suitable size and cabinet for housing mounting MCCB and duly powder coated mounted on PCC (1:4:8) platform and panel board to be fixed on an angle iron frame which is made out of 25 x 25 x 4mm thick angle iron duly marked the incoming and outgoing controls including the following items:- (i) MCCB 63 Amps capacity 16 KA 4P, 415 volts- 01 No. Make :- Legrand/Havells or equivalent in approved makes.

Note:- Schedule of credit Rs. 67,531.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

m/s vaid contractor and builders

Mohd Rafiq and Co

R C TRADERS