Carrying out Civil Engineering Jobs, Supplying pick up Vehicle and other facilities for CED (Kota) Projects at Rawatbhata via Kota, Rajasthan

Amount

Lead charges for 1st 1 KM or part thereof, by mechanical transport including loading unloading, stacking / levelling etc.

Rock Note: The rate is applicable for NET Quantities arrived at after making deduction for voids @ 50% in respect of Rock from corresponding STACK / TRUCK Measurement.

Providing and laying in position cement concrete of 1:3:6 (1 cement, 3 crushed sand, 6 graded stone aggregate of maximum size 20 mm) including consolidation, finishing, curing etc. complete as per specificationsand drawings but excluding the cost of Form work shuttering, centering Complete at all levels.

Providing and constructing Brickwork in cement mortar 1:4 using crushed sand with Flyash / Flyash Lime bricks with minimum 70 kg / Sq. cm strength of approved make and size in Sub structure including, scaffolding, raking out joints, curing, cleaning complete all as per specifications and drawings.

Providing and Painting two coats of synthetic enamel paint on Steel Surfaces of approved brand and manufacture to give an even shade without primer coat.including preparation of the surfaces,scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Providing, supplying AC/non-AC Pick up van / Utility van five seater with rear side provision for transporting materials including driver on hiring basis for use of BARC staff for 6 days a week for carrying out day-to-day official movement and as safety vehicle for P-1185 project at RR site, Kota

Non AC Pick up van/Utility Van

AC Pick up van/Utility Van Conditions : 1. The above rates shall be inclusive of Fuel and lubricants, Driver(s), other consumables, maintainance, etc. 2. In & out timings at CED(Kota) Project site shall be strictly considered for the billing/ measurement/ payment. 3. Break Down Hours and Lunch break timings shall not be considered for payment. 4. Fraction of hours shall be rounded off to nearest half an hour at the time of preparing the running bill/final bill. 5. being a strategic organisation, the driver(s) should have good credentials and shall have valid PVC, driving license and address proof. They should be in a position to understand Hindi / English also apart from local language. 6. The make or model of the vehicle should be of year 2020 or later (with BS-VI norms) for a minimum run of 1500 kms per month.The charges for extra kms over and above 1500 kms. is fixed at Rs. 7.00 per km for Non AC and Rs 9.00 per Km for AC. 7. The vehicle shall be maintained in good running condition with good upholstery, fitness, good tyres and shall commensurate with the image of BARC. The tyres of the vehicles shall be replaced periodically and always with brand new tyres and not retreated ones. 8. The vehicle should be free from all sorts of defects and will be subjected to inspection by a representative of BARC whose decision is final and binding as regards suitability of that particular vehicle. 9. The vehicle should be transport vehicle and preferably in white colour with a board " ON GOVERNMENT OF INDIA DUTY". 10. The cost of POL, maintenance of vehicle, wages of driver(s), Motor Vehicle taxes, comprehensive insurance, etc. shall be payable by the Contractor and BARC shall have no liability towards usage of the vehicle. 11. Maintenance of the vehicle including replacement of parts, fuel, etc. will be provided by the firm. 12. The cost of damages to any Government movable/immovable property in and around the site shall be entirely borne by the Contractor. 13. No revision of price shall be entertained during the period of contract.14. In case of absence of vehicle even for a day, propotionate payment towards a day will be deducted from monthly bill besides imposing a penalty of Rs. 500/- per day. Tentative/Suggested Model & Make for guidance of bidder(s) : M/s Mahindra Bolero or approved equivalent

Supplying man power alongwith necessary pans, spades, shovels, pickaxe, punjas, ropes, small specials spade, rain coats, safety shoes etc., minimum two number of labour per day upto maximum any number of labour as and when decided by Project Engineer to work for eight hours per day or monsoon peiod to carry out the cleaning of chocked drain gratings grills / hume pipes/ footpath by removing the dry leaves silt etc., and also carry out seasonable departmental work allotted by Project Engineer from time to time.

Carrying out Civil Engineering works like surveying & leveling, checking of formwork fabrication, reinforcement fabrication as per drawings, witnessing sample retrieval & testing for various construction materials, ensuring concrete ingredient ratio at batching plant and pouring of appropriate grade of concrete in plain and reinforced concrete works, ensuring proper mixing of approved ingredients & waterproofing admixtures for mortars and brickwork, plaster, flooring & waterproofing works, and other civil & PH works including supervision of construction safety as per BARC specifications & relevant documentation, compiling, binding and preparation of tender documents & Agreements overall as directed by Engineer-in-Charge. Note : (1)Each Job shall be carried out by one qualified Technician having minimum SSC with Trade certificate in Masonary/Plumber/Carpenter/Painter Trade of less than one year duration from ITI/Government Recognised Vocational Training Institute or experienced Technician retired from Government service. (2)Deployment: The contractor shall deploy one Technician for each job as single Day work for 6 working days per week for minimum 8 ½ hours per day with 30 minutes of break, in General (Ist / IInd) or on Round the clock shift including Saturdays, Sundays & holidays whenever necessary as per the discretion of the Engineer-in-Charge during the contract period. In case of emergency works like continuous pouring of concrete or shutdown/maintainance work, the technician will have to stay longer occasionally as per the instruction of the Engineer in-charge. No additional payment will be made on this account. (3) Period of work: The contractor shall carry out number of Jobs per day as directed by Engineer-in-charge. (4) Mode of measurement : Measurement will be per job basis per day. A single job shall be carried out by deploying one Technician exclusively for the particular job. (5) The Technician should be engage after scrutiny of by EIC of CED,BARC and approved by Competent authority and deployed by competent authority and the deployed technician will report to BARC Engineer/EIC. (6) The minimum notice period before change of technician is 1 (one) month; failing which a compensation , for not providing technical support, Rs. 1247/- per day of shortfall in notice period will be levied on contractor.

Carrying out Civil Engineering works like surveying & leveling, checking of formwork fabrication, reinforcement fabrication as per drawings, witnessing sample retrieval & testing for various construction materials, ensuring concrete ingredient ratio at batching plant and pouring of appropriate grade of concrete in plain and reinforced concrete works, ensuring proper mixing of approved ingredients & waterproofing admixtures for mortars and brickwork, plaster, flooring & waterproofing works, and other civil & PH works including supervision of construction safety as per BARC specifications & relevant documentation, compiling, binding and preparation of tender documents & Agreements overall as directed by Engineer-in-Charge. Note : (1) Each Job shall be carried out by one qualified Degree holder with 2 (two ) year experience or Diploma holder with 5 (five) year experience (Licentiate in Civil/Construction Engineering / Technology) conducted by Board of Technical Examinations / University/ Autonomous Govt / Govt recognized recognized Polytechnic/ Institute. (2) Deployment: The contractor shall deploy one Engineer for each job for minimum 26 working days per month for minimum 8 ½ hours per day with 30 minutes of break, in General (Ist / IInd) or on Round the clock shift including Saturdays, Sundays & holidays whenever necessary as per the discretion of the Engineer-in-Charge during the contract period. In case of emergency works like continuous pouring of concrete or shutdown/maintainance work, the Engineer will have to stay longer occasionally as per the instruction of the Engineer in-charge. No additional payment will be made on this account. (3) Period of work: The contractor shall carry out number of Jobs per month as directed by Engineer-In-Charge. (4) Mode of measurement : Measurement will be per job basis. A single job shall be carried out by deploying one Engineer exclusively for the particular job. (5) Engineer should be engage after scrutiny by EIC of CED,BARC and approved by Competent authority and the deployed engineer will report to BARC Engineer/EIC. (6) The minimum notice period before the change of engineer is 1 (one) month; failing which a compensation, for not providing technical support, of Rs. 1693/- per day shoftfall in notice period will be levied on the contractor,

Providing safety Personnel Protective Equipments (PPEs) for Engineers, supervisors and workers including transportation, delivery, storage in good condition etc. as instructed by Engineer in-charge.

Safety helmet- as per IS 2925 : 1984 (Reaffirmed 2000) or EN 397 CE approved including helmet refill with sweat band, chin strap, air slot for ventilation etc.

Safety shoe- as per IS:15298 Part 2 or EN 345

Full harness safety belt - conforming to EN 361 (IS:3521-1999) with twin braided rope lanyard having scaffolding hooks .

Ear muff- lightweight with adjustable ear cup as per IS:6996 ‐1973(Reaffirmed 1998) or EN 352‐1:2002

Hand Gloves - with 2 Thread Poly-cotton premium quality cotton as per IS:4770–1991 (Reaffirmed 2001)

Safety jackets - reflective jacket with fluroscent colour( green, yellow, orange) ,made of 110 gsm 100% Cotton Fabric

Safety goggles - with 180° field of vision of optical Class-1 meeting safety standard ANSI Z 87.1 High Impact Standard, CE Marked, conforming to EN 166 or IS 5983 (Reaffirmed 2002)

Providing Structural steel work using angles, channels, joists and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge

Up to and including 300 mm Joists, 350 mm channels, and below sections using materials of approved manufacturers. (ISI marked) All test reports to be provided along with the supply of the materials conforming to IS:2062

Providing and fixing precoated Galvalume Roofing profile sheets of approved size, shape and pitch up to and including single length of 12.00 met. The sheet shall be fixed using self drilling / self tapping screws of size (5.5 X 55 mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete upto any pitch in horizontal / vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as directed by the Engineer-in-charge

Galvalume sheet roofing 0.50 mm Thickness in Single sheet

Providing and fixing 6 mm thick mirrors of size 600 X 450 mm of approved make with bevelled edges complete with 6 mm thick asbestos sheet back ground fixed to walls with C.P brass screws and concealed washers complete all as per specifications and as directed by the EIC.

kardam constructions priavte limitd (BID ID -3082112)

Prajapati Contractor (BID ID -3084645)

M/s New India Builders (BID ID -3079460)