WELCOME MAINT AND BR REPAIR WORKS OF SMQ, OMQ IN 2 AREA, ANC AND MAP AREA UNDER AGE BR-II OF GE (AF) ADM AREA AT AF STATION AGRA.

Amount

Taking down of cement or cement lime plaster of any description on brick work or stone walls etc including racking out joints, hacking for key scrubbing down with water etc complete & removing debris complete all as specified and directed

M&L for brick work with old size fly ash bricks straight or curved on plan with mean radius exc 6 m built in CM1:6 including demolition of existing brick work built in CM of any description complete all as specified and directed

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces walls incl @2% WPC finished even & smooth without using extra cement complete all as specified and directed. Note : Integral WPC shall be measured and paid separately.

M&L for rendering wall, chhaja,15mm thick in CM 1:4 mixed with Pidi proof 101 LW(+) of Dr fixit or equivalent intergral water proofing admixture:- @ 200ml/bag over two coats of super latex 302 of Dr fixit or equivalent in the ratio (1:4:7) (One part super latex, 4 part water and 7 parts of cement) @ 1.50 Kg of homogenious mixture/sqm in two coats and finish the surface even and smooth (without using extra cement) complete all as specified and directed. Note: Pidi proof 101 and super latex 302 to be measured and paid separately.

Supply only Pidi proof 101 LW (+), Fosrok, Brush bond/ equivalent.

Supply only Super latex 302 Dr fixit/ equivalent.

M&L for rendering 15mm thick in cm 1:6 on brick/concrete surfaces finish even & smooth without unsing extra cement complete all as specified and directed

M&L for rendering 10 mm thick in cement mortar 1:3 on concrete surfaces of ceiling finished the surface even & smooth without using extra cement complete all as specified & directed.

M&L for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed

M&L for applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @0.90 liter/10 sqm over new surfaces complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and apply two coat of distemper oil emulsion over a coat of clearcolle primer complete all as specified and directed.

M&L preparation of old decorated plastered suface of wall including brooming down or by steel wire brushes, scrapping down smoke spot mould & efflorescent salt & greasy spots etc. on old decorated plastered or unplastered surface of walls including cornices etc & applying two coat of white wash complete all as specified & directed.

All as per srl item no 12 here-in-above but on surface of ceiling.

M&L for preperation of old decorated plastered suface of walls & applying two coat of cement base paint complete all as specified and directed.

M&L for preperation of old decorated plastered suface of walls & applying one coat of distemper oil emulsion white or tinted on old decorated surfaces of walls complete all as specified and directed.

M&L for preperation of old decorated plastered suface of walls & applying two coat of distemper oil emulsion white or tinted on old decorated surfaces of walls complete all as specified and directed.

M&L for complete removal of existing treatment from wall surface and applying two coat of distemper oil emulsion white or tinted complete all as specified and directed.

M&L for applying 1mm thick of Birla/ JK wall care putty in new or old decorated surface for smooth finish complete all as specified and directed.

M&L for distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on walls Complete all as specified & directed.

M&L for one coat of synthetic enamel paint on old wood or wooden based surfaces of any description over 10cm width or girth including preparation surfaces complete all as specified and directed.

M&L for two coat of synthetic enamel paint on old wood or wooden based surfaces of any description over 10cm width or girth including preparation surfaces complete all as specified and directed.

M&L for one coat of synthetic enamel paint on steel surfaces of any description over 10cm width or girth including preparatin of old painted steel surfaces complete all as specified and directed.

M&L for two coat of synthetic enamel paint on steel surfaces of any description over 10cm width or girth including preparatin of old painted steel surfaces complete all as specified and directed.

M&L for preparation of old painted of iron/CI pipes surface of any description exceeding 10cm in width or girth and applying one coat of black bituminous paint complete all as specified and directed.

M&L for applying two coats of exterior emulsion paint over old plastered surfaces of walls of make," Weather coat in Berger/Apex in Asian/excel in nerolac Weather shield in ICI" on surface of brick plastered or concrete surface including preparation of surface complete all as specified and directed. Note:- work will be carried out upto tripple storey and above height hence all rates are included for scafolding/ shuttering and safety precautions etc.

M&L for cutting out cracks to 'V' section in existing beams/columns and preparing the surfaces as per manufacture's instruction and applying cementious water proofing crack repair mortar (CRACKSEAL) or equevalent make and making good to a smooth surface, complete all as specified and directed.

M&L for glazed coloured ceramic tiles in vertical surfaces as dado and skirting of size 300x200x6-7mm/ 450x300x6-7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 on other then fair faces of brick wall finished rough to fix tiles and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7-8mm thick (square or rectingular)area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7-8mm thick (square or rectingular)area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7-8mm thick joint less (square or rectingular) on vertical surface such as skirtinh etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over 10mm thick rendering in CM 1:3 and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for Virified Ceramic tiles 7-8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match 15mm thick screed bed in CM 1:6 and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for renewing glazed tiles in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles including supply of tiles complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames not exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames exc 1.5 sqm but not exc 4 sqm each complete all as specified and directed.

S&F steel window/ventilator with pressed steel frame made out of 1.25mm tk steel sheet having two rebate with glazed shutters and fly proofing shutters with side hung shutters incl projecting type hinges with steel handle, and steel peg stay with and without glazing bars dovetailed or welded incl guard bars complete all as specified and directed and shown in drg CE/ALD/TD-172 sh 1/2 & 2/2.

S&F for Framed work such as in doors or gates of angle (Fe410-W Gde-E-250 quality-A) or tie bars, hold fasts other section with gusset plates,rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooksn and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing incl one shoap coat of zink chromate primer paint complete all as specified and directed.

S&F for Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F Fatory made solid panel PVC door shutter, 30mm thick(stiles), consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded feathered edges plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struk inside with solvent cement for stiles and plain colour feathered edges PVC sheet for top rail,lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles & rails with suitable for feathered edges PVC sheet, and jointed together with solvent cement, fixing in the frame at site complete all as specified and directed.

S&F Aluminium anodise sections for Door shutters with frame, Three track sliding windows ( 2 x glazed & 1 x Gauzed shutter) and ventilator, Partitions etc including necessary jointing cleats, screws etc complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 with using 20mm graded stone aggregated as in cill, step and for inserting hold fast of doors and windows all as specified and directed.

S&F 30mm thick flush shutters factory made solid core construction with block boards core and plywood face panels, commercial type on both sides (ISI marked) fixed to chowkhats complete all as specified and directed.

S&F for 35mm thick glazed and skelton shutters (2nd hardwood), open rebated and prepared to receive glass, gauge, etc. divided into squares,with plain, chamfered or rounded , mitred and rebated sash bar any numbers,edges of framing plain,chamfered or rounded,fitted with cut and mitred beads for securing glass,etc; sizes of members of shutters as specifed in SSR Part 1, section 8, clause 8.24 (a) supplied and fitted to chowkhats complete all as specified and directed.

M&L for preparation of new steel surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint of any shade complete all as specified and directed.

M&L for preparation of new wooden surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint of any shade complete all as specified and directed.

S&F SS wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or beads in square not exc 0.50 sqm in each pane, of any description complete all as specified and directed.

S&F in repair 3mm thick sheet glass ordinary quality and glazing with oil putty or beads in square not exc 0.50 sqm in each pane of any description complete all as specified and directed.

M&L for Welding work in repairs not exc 2.5cm in length to not exc. 6mm thick of metal surfaces complete all as spd and directed.

S&F 100 mm long medium weight, stainless steel Butt hinges complete all as specified and directed.

S&F aluminum anodized barrel tower bolt of extruded section size of bolt 150mm complete all as specified and directed.

S&F aluminum handle cast anodized 125mm size complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F in repair 15mm bore dia stop valve of cast copper alloy, fancy type CP long body (concealed type) high pressure screwed for iron pipe complete all as specified and directed.

S&F in repair 15mm bore dia stop valve, angle valve of cast copper alloy, fancy type CP long body high pressure screwed for iron pipe complete all as specified and directed.

S&Fin repair for brass CP towel ring with bracket fixed wirh brass CP screws complete all as specified and directed.

S&F in repair 15mm bore brass CP wall mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

S&F in repair 15mm bore brass CP basin mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections complete all as specified and directed.

S&F sheet glass corner self consisting of 5.5mm thick sheet glass self 20cm radius with chromium plated bracket guard and rail and fixed with CP screws and wood cleats with wall complete all as specified and directed.

S&F sheet glass self consisting of 5.5mm thick sheet glass self 12cm wide with chromium plated bracket guard and railing 60cm long and fixed with CP screws and wood cleats with wall complete all as specified and directed.

M&L in repair for 18/19mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination, fixed with screws or rubber beads to timber or metal frame work complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type cup board shutter/shelves/partition etc. of size 18mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws,complete all as specified and directed.(Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

S&F Stainless steel auto closing hinges 35mm of O crank(KH-001)or 8 crank(KH-002) openable at 110 degree for kitchen cabinet shutter complete all as specified and directed.

S&F Stainless steel 75mm long handle complete all as specified and directed.

S&F Stainless steel 75mm long tower bolt complete all as specified and directed.

S&F ball catches (magnetic catcher) with 8mm dia steel ball brass body and striking plate including letting in, over all size 50 X 15mm and fixed complete all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like bedded over and including 20mm thick screed bed in CM (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with approved shade of granite including ruunding edges with demolition of existing stone slab complete all as specified and directed.

Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including cutting , chaging making good wall and all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors and testing including taking up or down of existing GI pipe complete all as specified and directed.

S&F in repair drapery rod fancy type made out of 25mm dia MS PVC coated pipe having wall thickness 0.63 mm bright finish ,with decorative type hard plastic finial as end holders with 02 Nos MS brackets fixed with SS screws or rawl plug complete all as specified and directed.

S& F in repair spindle for bib tap, wall mixer, basin mixer, stop cock of shower etc. complete all as specified and directed.

S& F in repair stainless steel sink waste coupling of PTMT (half or full threaded) (minteight 32mm-45gm/ 40mm-60gm) 40mm dia bore complete all as specified and directed.

S&F in repair flushing cisternsyphon kit with all accessories standared size complete all as specified and directed.

S&F in repair 32/40mm dia semi rigid PVC waste pipe for sink amd basin with length not less than 700mm complete all as specified and directed.

S&F in repair brass chromium plated shower rose swivil joints 125mm size with CP long sunk arm including fixing to steel pipe complete all as specified and directed.

Taking down wash hand basin or sink of any type/ size including refixing the same by providing new angle iron brakets of size 40 x 40 x 5 mm & 450 mm long duly painted with synhetic enamel paint at the same place complete all as specified and directed.

S&F in repair Stainless steel 1mm thick Plate rack of size 1150mmx950mmx250mm complete all as specified and directed.

S&F in repair 10 Ltrs capacity, PVC valveless, syphonic action type, low level flushing cistern, white, with inlet, ball valve, float and handle complete with all internal accessories and fixed to wall, PVC flush pipe 32mm dia 90cm long fixed properly to inlet of WC with and including 600 mm long PVC connection with 02 Nos PTMT nuts and rubber washer and making good to disturbed surfaces of wall or floor complete all as specified and directed.

S&F square or rectangular coloured acrylic sheet 3mm thick with outstanding strength and stiffness and fixed with stainless steelscrews and PVC plugs to wall, area of each sheet not exc 0.25 Sqm complete all as specified and directed.

Supply and sticking computerized designed sticker letters or figures (Block,Roman,Italic or Indian) not exc. 7.50 Cm height of any colour to be stick on acrylic sheet ( Acrylic sheet to be paid separately)as per instructions and specifications complete all as specified and directed.

Easining of existing doors, windows and ventilators of any description, size and in any position, making good and functionable with repairs to shutters or fittings and fixtures, with welding works if required complete all as spd and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes exc 250 & n exc 500 ltrs including removing stored water and cleaning with chlorine water and writing with enamel paint CLEANED ON ---------- (date) complete all as spd and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes exc 500 & n exc 1000 ltrs including removing stored water and cleaning with chlorine water and writing with enamel paint CLEANED ON ---------- (date) complete all as spd and directed.

M/s Krishna Construction Company (BID ID -3332904)

M/s M S Sharma and Co. (BID ID -3333874)

C P Singh and Co (BID ID -3334254)

M/s Srijan Construction Company (BID ID -3330556)

M/s Shiv Builders (BID ID -3329814)

M/S RAVI CONSTRUCTIONS (BID ID -3332813)

aman construction & general suppliers (BID ID -3334198)