REPAIR REPLACEMENT OF UNSERVICEABLE HIGH MAST LIGHTS HIGH WAY LIGHTS AND BUILDING LIGHTS UNDER GE EAST AGRA

Amount

Taking down street light fitting any type any description from pole complete all as specified and directed .

Supply and fixing new generation, energy saving and environmental friendly long life LED High way light fitting made up of pressure die-cast aluminium housing with high power LEDs as lightighting source and lens embedded,electronic driver type 80 watt LED Lm 150 lm/Watt, IP 66 complete all as specified and directed . Make: Havells Cat SAUCERGENXPROHBP80WLED757P60DBOLT G or equivalent of Phillips/Wipro

Supply and fixing new generation, energy saving and environmental friendly long life LED Flood light fitting made up of pressure die-cast aluminium housing with high power LEDs as lightighting source and lens embedded,electronic driver type 100 watt LED , IP 66 complete all as specified and directed . Make: Havells Cat JETAIRISFLS 100WLED757SYMLT G or equivalent of Phillips/Wipro

Supply and fixing new generation, energy saving and environmental friendly long life LED Flood light fitting made up of pressure die-cast aluminium housing with high power LEDs as lightighting source and lens embedded,electronic driver type 120 watt LED, IP 66 complete all as specified and directed . Make: Havells Cat JETAIRISFLS 120WLED757SYMLT G or equivalent of Phillips/Wipro

Supply and fixing new generation, energy saving and environmental friendly long life LED Flood light fitting made up of pressure die-cast aluminium housing with high power LEDs as lightighting source and lens embedded,electronic driver type 70 watt LED 6000K, IP 66 complete all as specified and directed. Make: Havells Cat JETA PROFL70WLED757LT G or equivalent of Phillips/Wipro

Supply and fixing new generation, energy saving and environmental friendly long life LED Bulk head fitting made up of pressure die-cast aluminium housing with high power LEDs as lightighting source and lens embedded,electronic driver type 10 watt LED 6000K, IP 66 complete all as specified and directed by Engineer in charge. Make: Havells Cat HEXAFT10WLED857SSYMBOPC or equivalent of Phillips/Wipro

M & L weather proof flat twin core aluminium conductor 4 sqmm PVC insulated , shetaed wire complete all as specified and directed .

S&F on pole ,dust proof, vermin proof , out door type Polycarbonate box incl MCB SPN 6 Amps,, SPN bus bar, insulator,GI nut, bolts and washers and aluminum lugs etc with and including FI clamp made out of 30 mm x 3 mm , nut and bolts complete all as specified and directed. Make of box & MCB : Make: Legrand/ABB/Schenider

S&F Street light bracket made out of 40 mm dia GI light grade pipe 1.2 mtr long bend to shape 120 degree and duly fixed alongwith existing pole/bldg with the help of 2 Nos of MS clamp of sizes 32x3 mm including suitable size of bolt ,nuts, and washers complete all as specified and directed. Make of GI pipe : Tata/Jindal

S& F in repair Driver for LED 45 Watt 230 Volt, AC complete all as specified and as directed.

S& F in repair Driver for LED 60 Watt 230 Volt, AC complete all as specified and as directed.

Excavation in trenches in hard/dense soil not exc 1.5 Mtr wide & not exc 1.5 Mtr in depth for taking out unserviceable under ground cable including forming bottom surface complete all as specified and directed .

Returning & filling in including spreading leveling watering & well ramming in layers not exc 25 cm thick in any type of soil complete all as specified and directed .

Removals of excavated material to a distance not exc 50 mtr & depositing where directed at level not exc 1.5 mtr above the stating point in any type of soil complete all as specified and directed.

Supply & spreading in trenches with clean dry sand unwashed including gently punning around cable complete all as specified and directed .

Supply & laying bricks common burnt clay building sub class`B' bricks laid in trenches for cable protection complete all as specified and directed .

Laying only old bricks obtained from the same work over sand cushioning for mechanical cable protection in trenches with width of brick perpendicular to the length of cable, complete all as specified & directed.

M&L PCC 1:4:8, M-7.5, type D-2, (using 40mm graded crushed stone aggregate), 100mm thick as in sub base of floor for transformer and foundation of poles complete all as specified and directed .

M&L PCC 1:2:4, M-15, type B-1 (using 20mm graded crushed stone aggregate), 100mm thick as in floor finsihing transformer, finishing cement concrete surface even and smooth using extra cement, and coping of poles complete all as specified and directed .

Supply and laying connecting and testing XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable with aluminium conductor 1100 V grade cross sectional area 10 Sq mm 2 core complete all as specified and directed.

Supply and Laying connecting and testing XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable with aluminium conductor 1100 V grade cross sectional area upto 16 Sq mm 4 core complete all as specified and directed.

Supply and Laying connecting and testing XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured heavy duty electric cable with aluminium conductor 1100 V grade cross sectional area upto 50 Sq mm 3.5 core complete all as specified and directed.

M&L for drilling suitable dia horizontal bore holes for insertion/ laying of 50/40 mm bore GI tubing of any description below/under existing road surfaces / floors at a level not less than 0.60 mtr etc with using mechanical / or manual devices as required at site including making good the disturbed surfaces to match with the existing after laying pipes complete all as specified and directed . Note : (i) Cost of equipment tools and plant material (horizontal boring rig machine) required for boring shall be arranged by contractor at no extra cost to the Govt. (ii) GI Pipe 40 mm will be measured and paid separately

M & L for GI pipe light grade 40 mm dia with all fitting laid in bore holes/trenches/drian/culvert or fixed along with pole/wall including 02 Nos FI clamps of 25x3 mm including nut, bolts etc. complete all as directed. Make of GI pipe : Tata/Jindal

Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to GI wire 4.00 mm as main earthing lead by means of galvanized bolts, nuts and washers with connected to earth test point & to main switch board etc. all as specified and testing on completion with and including necessary excavation and earth work in any type of soil, earth electrode, earthing lead from electrode to equipment/substation/panel etc, adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded black trap/granite/Basalt stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4) type B-1 (using 20mm graded black trap/granite/Basalt stone aggregate) 40mm thick cover reinforced with 6mm dia bars 3 Nos both way with 12mm dia round bar handle, GI light grade watering pipe 20 mm dia with funnel and wire mesh, and 15 mm dia GI light grade earth lead protection pipe, complete all as specified and directed. Note : Earth lead & GI protection pipe up to 7.5 m shall be deemed to be included in quoted rate

Removing of old paint by removers scrubing from LT steel poles 9 meter long, cross arms clamps etc for painting and M &L for painting with one coat of superior quality aluminum paint on exposed surface of poles and street light bracket mounted on the poles,junction box etc and making black strip upto1.5 Mtr height from ground level and writing pole Nos etc. written on it with black synthetic enamel paint compete all as specified and directed Make of paint : Asian Paint(Apcolite), Shalimar(Superlac Hi Gloss), Nerolac Paint (Nerolac full Gloss).

Supplying and fixing in repair MCCB, 63 Amps, 4 pole, 415 Volts, AC supply, having breaking capacity Icu = 16 KA with fixed load setting, thermal magnetic release including dismantling old one complete all as specified and as directed. Make: Legrand cat part 4200 13 or equivalent in ABB/Schenider

Supplying and fixing in repair MCCB, 100 Amps, 4 pole, 415 Volts, AC supply, having breaking capacity Icu = 16 KA with fixed load setting, thermal magnetic release including dismantling old one complete all as specified and as directed. Make: Legrand cat part 4200 15 or equivalent in ABB/Schenider

S & F in repair street light switch using timer for automatic switching of street light based on LUX level of natural light , The sensor along with suitable power contactor MCB support terminal shell be housed in enclosure made out of anti rust/ shock proof/ termite proof/ confirming to IP54 suitable for 12 KW load compete all as specified and directed Make of Contactor ABB/BCH/Legrand, Make of switch: Timer Nature switch/ Legrand

Supplying and fixing in repair power contactor,3 pole with AC coil 230 volt, 2 NO + 2 NC , capacity 40 Amps compete all as specified and directed Make: Cat Pt No 4161 30 of Legrand or equivalent in Havells/ABB/Schenider

Supplying and fixing in repair power contactor,3 pole with AC coil 230 volt, 2 NO + 2 NC , capacity 50 Amps Make: Cat IHPAA050511 or equivalent in Havells/ABB/Schenider

Supplying and fixing in repair timer switch astronomical 3 pole 08 Kw including enclosuremade ofrust proof electric shock proof, termide proof and FRR Grade SMC junction box confirming to IP 54 for street light based on lux level of natural light compete all as specified and directed Make of switch: Cat Pt No 4126 54 of Legrand or equivalent in Nature switch/ L&T/Secure

S&F in repair PVC Aluminium conductor cable 2.5 sqmm 2 core complete all as specified and as directed.

Supply and fix stay assembly using GI stay rod 20 mm dia complete with stay plate mild steel of size 300x300x6.00mm thick, stay bow complete all as specified and shown in Electrical Plate No 1 . (Necessary earth work, stay wire, loop insulator,clamps and PCC shall be measured and paid seperately) complete all as specified and directed.

Supply and fixing Galvanised stay wire of size 7/4mm all as specified and directed.

Supply and fixing in repair for loop type insulator large size porcelain vitreous of size 90 x 140 mm clearence of hole 16mm complete all as specified and directed.

Taking down and repairing of old unserviceable Solar Security Lights including replacement of old unserviceable wiring with and including replacement of following items as per existing and complete all as specified and as directed:- Note:- Parts required shall be measured and paid separately as "Supply only"' in appropriate items.

Supply only Solar Battery (SMF/Tubular) SB 12V 75AH Tubular Make: SOLAR TECH/Surya/Tata BP Solar

Supply only Luminair SSLS CFL 11W Make: SOLAR TECH/Surya/Tata BP Solar

Supply only PCB Solar Charger Controller Make: SOLAR TECH/Surya/Tata BP Solar

Supply only SPV Modules 74 W 12 V Make: SOLAR TECH/Surya/Tata BP Solar

S&F in repair Solar Street Light 12 Watt, Lm 125/Watt including LED Light, MPPT SCC, Mono Crystalline SPV Panel, LiFeP04 Battery Complete including taking down all as specified and directed.Make: SOLAR TECH/Surya/Tata BP Solar

M/S Mamta Electricals

M/s J S & SONS