Loading
Loading…
Loading…
Tender Value
₹4.4 Cr
EMD Value
₹8.7 L
Closing Date
18 May 2026, 3:00 pmClosed
Yes (up to 3 members)
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Station Development
CON/ RSP
16 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V'whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-2 of Chapter-3, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. [Full details as per Para 10.2 of Tender Document]
The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or(ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or(iii) One similar work each costing not less than the amount equal to 60% of advertised value of the tender. [Full details as per Para 10.1 of the Tender Document]
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates.
In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- Execution of any Civil Engineering work
55 conditions · 10 needing a document upload
Please submit your bank details i.e.Name of the Bank along with Bank Branch Code, Account Number, IFSC Code, and PAN Number.
Please furnish list of plant and Machinery available on hand own and proposed to be inducted own and hired to be given separately for the subject work.
Please furnish list of Works on hand indicating Description of Work, Contract Value, Approximate value of balance work yet to be done and Date of award.
Please furnish list of Works completed in last Seven years (Ending last day of month previous to the one in which tender is invited) giving Description of Work, Organization for whom executed, approximate value of contract at time of award, Date of award and Date of Completion. Date of actual Start, Actual Completion and Final value of Contract shall, also be given. [As per Annexure -F attached in tender document]
Please furnish list of personal, organization available on hand and proposed to be engaged for the subject work.
At the time of submission of bid, if you have any special Condition then upload in scanned pdf copy.
System of verification of Tenderer's credentials: (a)The tenderer shall submit along with the tender document, documents in support of his/their claim to fulfil the eligibility criteria as mentioned in the tender document. Each page of the copy of documents/certificates in support of credentials submitted by the tenderer shall be self attested/ digitally signed by the tenderer or authorized representative of the tendering firm. Self- attestation shall include signature, stamp and date (on each page). Only those documents which are declared explicitly by the tenderer as "documents supporting the claim of qualifying the laid down eligibility criteria", will be considered for evaluating his/their tender.
Please furnish list of Works on hand indicating Description of Work, Contract Value, Approximate value of balance work yet to be done and Date of award.[As per Annexure attached in tender document]
Upload Scanned receipt copy of payment of Bid Security should be accepted through net banking or payment gateway or submission of Bid Security in the form of Bank Guarantee. Full details para 5.0 of GCC-April 2022 in tender document.
Please submit a certificate in the prescribed format (Enclosed as per ANNEXURE-2 of Chapter-2 in the tender documents) for verification / confirmation of the documents submitted for compliance of eligibility / qualifying criteria. Non submission of the certificate, or submission of certificate either not properly filled in, or in a format other than the prescribed format shall lead to summary rejection of your offer. JV firm Or Partnership firm/LLP firm/etc :Every bidder have to give this certificate, If bidder is a JV firm or Partnership firm/LLP firm/etc then this certificate is to be given by each member of JV or Partners of Partnership firm/LLP firm/etc.
An undertaking regarding non blacklisted or debarred should be submitted by all partners in case of Partnership firm / LLP firm / one or more members of JV is/are Partnership firm (s) or LLP firm (s), which certify that they are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tenders/contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were/are partners/members. [As per Annexure-L attached in tender document] (Full details in para 14.00, 15.00, 17.00 and 18.00 of tender documents).
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The earnest money deposited with the tender of successful tenderer will be retained as part of security deposit which will be 5 percent of the value of work awarded. The balance amount of security deposit will recovered on account bills of the work @ 6 percent till it reaches upto 5 percent of the value including earnest money.
For enactment of this Act, the tenderer shall be required to pay cess 1 of cost of construction work to be deducted from each bill. Cost of material shall be outside the purview of cess, when supplied under a separate schedule item Railway Boards No. 2008/ CE-1 CT/6 Dt. 09-07-2008
Rates are inclusive of all taxes/octroi, license fee, royalty charges etc. legally leviable by State, Central Govt. and/or any other local authority.
For those conditions for which standard formats have been given in the uploaded document title Formats for uploading of various format. The information should only be submitted in these standard formats.
In addition to General condition of contract 2022 and Indian Railways Unified standard specification Works Materials Volume I II 2010, revised upto date, special condition attached shall also apply.
Sales tax/Business tax will be recovered as per extant instruction on the subject.
The successful tenderer will have to submit full security deposit as per GCC-2022 before execution of the agreement.
Bank Guarantees BGs to be submitted by suppliers/contractors should be sent directly to the concerned authorities by issuing Bank under registered Post A.D.
(1) Earnest Money Cost: -All the tenderers/Contractors have to deposit full earnest money as stipulated in the tender document through online modes as permitted in IREPS application. (2) Tender Document Cost: -All the tenderers/Contractors have to deposit tender document cost as stipulated in the tender document through online modes as permitted in IREPS application.
a- One qualified Graduate Engineer where the cost of the work to be executed is Rs.200 lakh and above. b- One qualified Diploma Holder Engineer where the cost of the work to be executed is more then Rs.25 lakh, but less then Rs.200 lakh. Technical staff should be available at site whenever required by the Engineer- in-charge totake instructions. In case the contractor fails to employ the qualified Engineer, he shall be liable to pay amount of Rs.40000 and Rs.25000 for each month or part thereof for the default period for the provisions, as contained in para a and b above respectively. The decision of the Engineer-incharge as to the period for which the required technical staff was not employed by the contractor and as to the reasonableness of the amount to be deducted on this account shall be final and binding on the contractor.
Care in Submission of Tenders :
Before submitting a tender, the tenderer will be deemed to have satisfied himself by actual inspection of the site and locality of the works, that all conditions liable to be encountered during the execution of the works are taken into account and the rates he enters in the tender forms are adequate and all inclusive to accord with the provisions in Clause-37 of the Standard General Conditions of Contract for the completion of works to the entire satisfaction of the Engineer.
Tenderers will examine the various provisions of the Central Goods and Services Tax Act, 2017(CGST)/Integrated Goods and Services Tax Act, 2017(IGST)/Union Territory Goods and Services Tax Act, 2017(UTGST)/respective states State Goods and Services Tax Act (SGST) also, as notified by Central/State Govt. and as amended from time to time and applicable taxes before bidding. Tenderers will ensure that full benefit of Input Tax Credit (ITC) likely to be availed by the is duly considered while quoting rates.
The successful tenderer who is liable to be registered under CGST/IGST/ UTGST/SGST/ Act shall submit GSTIN along with other details required under CGST/IGST/UTGST/SGST Act to railway immediately after the award of contract, without which no payment shall be released to the contractor. The contractor shall be responsible for deposition of applicable GST to the concerned authority.
In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/SGST Act, the railway shall deduct the applicable GST from his/their bills under reverse charge mechanism (RCM) and deposit the same to the concerned authority.
(b)When work is tendered for by a firm or company, the tender shall be signed by the individual legally authorized to enter into commitments on their behalf.
(c)The Railway will not be bound by any power of attorney granted by the tenderer or by changes in the composition of the firm made subsequent to the execution of the contract. It may, however, recognize such power of attorney and changes after obtaining proper legal advice, the cost of which will be chargeable to the Contractor.
All documents related to Constitution of Firm by the Partnership Firm/ Joint venture/ Society/Companies/ MOU etc. duly notorized should be uploaded at the time of submission of bid.
The tenderer shall upload scanned copies of mandatory credentials such as experience certificates (Except Private Individual), turn over Certificates and any other documents as applicable.
Goods & Service Tax (GST) will be recovered as per extant instruction on the subject.
The Railway Reserve the right to accept in whole or in part or reject any tender or all tenders without assigning any reason for such action. Rate should not be quoted for part quantity.
Performance Guarantee :-(a)The successful bidder shall have to submit a Performance Guarantee (PG) within 21 (Twenty one) days from the date of issue of Letter of Acceptance (LOA). Extension of time for submission of PG beyond 21 (Twenty one) days and upto 60 days from the date of issue of LOA may be given by the Authority who is competent to sign the contract agreement. However, a penal interest of 12% per annum shall be charged for the delay beyond 21(Twenty one) days, i.e. from 22nd day after the date of issue of LOA. Further, if the 60th day happens to be a declared holiday in the concerned office of the Railway, submission of PG can be accepted on the next working day. In all other cases, if the Contractor fails to submit the requisite PG even after 60 days from the date of issue of LOA, the contract is liable to be terminated. In case contract is terminated railway shall be entitled to forfeit Bid Security and other dues payable to the contractor against that particular contract, subject to maximum of PG amount. In case a tenderer has not submitted Bid Security on the strength of their registration as a Startup recognized by Department of Industrial Policy and Promotion (DIPP) under Ministry of Commerce and Industry, DIPP shall be informed to this effect. The failed Contractor shall be debarred from participating in re-tender for that work.
(b)The successful bidder shall submit the Performance Guarantee (PG) in any of the following forms, amounting to 5% of the original contract value:(i)A deposit of Cash;(ii) Irrevocable Bank Guarantee;(iii) Government Securities including State Loan Bonds at 5% below the market value;(iv) Pay Orders and Demand Drafts tendered by any Scheduled Commercial Bank of India;(v)Guarantee Bonds executed or Deposits Receipts tendered by any Scheduled Commercial Bank of India;(vi) Deposit in the Post Office Saving Bank;(vii) Deposit in the National Savings Certificates; (viii)Twelve years National Defence Certificates; ( i x ) Ten years Defence Deposits; (x)National Defence Bonds and(xi) Unit Trust Certificates at 5% below market value or at the face value whichever is less. Also, FDR in favour of FA&CAO (free from any encumbrance) may be accepted.
Offer submission period :- Fifteen days prior to closing date of tender, during which tenderers can submit their offer.
(1) Price Variation Clause (PVC) shall be applicable only in tender having advertised value above Rs. 2 Crores. The conditions will be follow with up-to-date correction slips. (2) Price Variation Clause for Annual Maintenance Contract or Zonal Contract :- The price variation Clause of General Conditions of Contract shall not apply to a works contract which is either an Annual Maintenance Contract or a Zonal Contract as per Railway Boards letter No.2013/CE/I/CT/O/10-PVC-Pt.I td.27.01.2015. (3) Price Variation Clause shall be applicable accordingly attached document.
For all details of General Condition, Please See uploaded Tender Document.
Additional works at ABSS: Ekma Railway Station of Varanasi Division, N.E. Railway under Amrit Bharat Station Scheme.
NER-BSB-RSP-2026-07
NER-BSB-RSP-2026-07
Open
Works - General
6 Months
Gorakhpur, Uttar Pradesh
₹0
₹8.7 L
18 May 2026
24 Apr 2026
4 May 2026
100 items across 2 schedules · ₹4,14,44,242.6 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil | cum 481.81 | — | 205.45 | 98,987.86 |
| 2 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | cum 21000 | — | 368.65 | 77,41,650 |
| 3 | All kinds of soil | cum 21000 | — | 104.5 | 21,94,500 |
| 4 | 1:1.5:3 (1 Cement: 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum 50.79 | — | 7,783.65 | 3,95,331.58 |
| 5 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 8.25 | 7,365.15 | 60,762.49 |
| 6 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 40 mm nominal size derived from natural sources) | cum | 350 | 6,670.25 | 23,34,587.5 |
| 7 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | cum 35.16 | — | 6,326.05 | 2,22,423.92 |
| 8 | Foundations, footings, bases for columns | Sqm | 85 | 307.95 | 26,175.75 |
| 9 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 12.5mm nominal size derived from natural sources) | Sqm 52.87 | — | 370.85 | 19,606.84 |
| 10 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum 67.64 | — | 8,364.2 | 5,65,754.49 |
| 11 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum 46.85 | — | 10,185.05 | 4,77,169.59 |
| 12 | cum 77.25 | — | 10,719.3 | 8,28,065.93 | |
| 13 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm 244.9 | — | 307.95 | 75,416.96 |
| 14 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. | Sqm | 515 | 669.55 | 3,44,818.25 |
| 15 | Suspended floors, roofs, landings, balconies and access platform | Sqm 333.62 | — | 766.55 | 2,55,736.41 |
| 16 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | Sqm 288.13 | — | 608.35 | 1,75,283.89 |
| 17 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm 185.68 | — | 804.25 | 1,49,333.14 |
| 18 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 35 | 8,683.8 | 3,03,933 |
| 19 | Add for using extra cement in the items of design mix over and above the specified cement content therein. | Quintal | 16.5 | 688.45 | 11,359.43 |
| 20 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum 115.42 | — | 6,658.25 | 7,68,495.22 |
| 21 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum 164.52 | — | 8,288.35 | 13,63,599.34 |
| 22 | Sqm 21.32 | — | 819.15 | 17,464.28 | |
| 23 | Cement mortar 1:4 (1 cement :4 coarse sand) | Sqm | 15 | 1,018.05 | 15,270.75 |
| 24 | Fastener with threaded dia 10 mm | Each | 15 | 33.8 | 507 |
| 25 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm 150.37 | — | 1,063.45 | 1,59,910.98 |
| 26 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. | Sqm | 20 | 4,474.2 | 89,484 |
| 27 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). | Each | 82 | 194.35 | 15,936.7 |
| 28 | 125x65x2.12 mm | Each | 116 | 48 | 5,568 |
| 29 | 300x16 mm | Each | 18 | 260.3 | 4,685.4 |
| 30 | 300x10 mm | Each | 9 | 117.65 | 1,058.85 |
| 31 | 125 mm | Each | 18 | 60.05 | 1,080.9 |
| 32 | Twin rubber stopper | Each | 9 | 62.25 | 560.25 |
| 33 | 25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (+/- 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (+/- 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm X 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer's specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places | Sqm 21.54 | — | 2,612.2 | 56,266.79 |
| 34 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in-Charge. | Metre 70.15 | — | 408.25 | 28,638.74 |
| 35 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 128 | 93.05 | 11,910.4 |
| 36 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg 26819 | — | 111.95 | 30,02,387.05 |
| 37 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. | Sqm | 20 | 9,397.35 | 1,87,947 |
| 38 | Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete. | Each | 4 | 185.95 | 743.8 |
| 39 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. | Kg 326.38 | — | 88.5 | 28,884.63 |
| 40 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Kg | 200 | 612.25 | 1,22,450 |
| 41 | Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with local sand, with common burnt clay non modular bricks. | Sqm 2500 | — | 733.3 | 18,33,250 |
| 42 | Ordinary cement without any pigment | Sqm | 60 | 1,185.3 | 71,118 |
| 43 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. | Sqm | 11 | 935.6 | 10,291.6 |
| 44 | Size of Tile 600x600 mm | Sqm | 125 | 1,416.65 | 1,77,081.25 |
| 45 | Size of Tile 1000x1000 mm | Sqm 42.67 | — | 2,551.95 | 1,08,891.71 |
| 46 | Size of Tile 600x600 mm | Sqm | 45 | 1,676.15 | 75,426.75 |
| 47 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent | Sqm 50.81 | — | 3,908.8 | 1,98,606.13 |
| 48 | Providing flat iron brackets 50x3 mm size with necessary bolts, nuts and washers etc. for fixing G.S. sheets gutters with purlins. | Metre | 36 | 77 | 2,772 |
| 49 | 100 mm diameter | Each | 24 | 308.45 | 7,402.8 |
| 50 | 110 mm diameter | Metre | 87 | 319.75 | 27,818.25 |
| 51 | 110 mm | Each | 15 | 119.95 | 1,799.25 |
| 52 | 110 mm bend | Each | 15 | 132 | 1,980 |
| 53 | 110 mm Shoe | Each | 15 | 115.95 | 1,739.25 |
| 54 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5- 7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 466 | 671.55 | 3,12,942.3 |
| 55 | Ridges plain (500 - 600mm) | Metre | 35 | 450.6 | 15,771 |
| 56 | Gutter (600 mm over all girth) | Metre | 32 | 1,110.6 | 35,539.2 |
| 57 | 1:4 (1 cement: 4 coarse sand) | Sqm | 650 | 307.25 | 1,99,712.5 |
| 58 | 1:6 (1 cement: 6 coarse sand) | Sqm 281.34 | — | 294.35 | 82,812.43 |
| 59 | 1:3 (1 cement : 3 fine sand) | Sqm 78.63 | — | 253.05 | 19,897.32 |
| 60 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. | Sqm | 275 | 214.3 | 58,932.5 |
| 61 | New work (two or more coats) over and including water thinnable priming coat with cement primer | Sqm | 375 | 162.55 | 60,956.25 |
| 62 | Two or more coats on new work | Sqm 315.35 | — | 92.75 | 29,248.71 |
| 63 | New work (Two or more coats applied @ 3.84 kg/10 sqm) | Sqm 1059.77 | — | 97.6 | 1,03,433.55 |
| 64 | New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm | Sqm 134.87 | — | 245 | 33,043.15 |
| 65 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture | Sqm | 15 | 144.9 | 2,173.5 |
| 66 | Two or more coats on new work | Sqm 1025 | — | 121.45 | 1,24,486.25 |
| 67 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | cum | 29.2 | 2,007.1 | 58,607.32 |
| 68 | bituminous road | Sqm | 50 | 353.65 | 17,682.5 |
| 69 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. | Sqm 5000 | — | 180.5 | 9,02,500 |
| 70 | Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density). | cum 21000 | — | 20.55 | 4,31,550 |
| 71 | 63 mm to 45 mm size stone aggregate | cum | 700 | 1,624.5 | 11,37,150 |
| 72 | Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . | cum | 500 | 865.8 | 4,32,900 |
| 73 | Cement concrete manufactured in automatic batching plant (RMC plant) i/c transportation to site in transit mixer | cum | 570 | 10,006.65 | 57,03,790.5 |
| 74 | With granite stone of area less than 0.50 sqm. | Sqm 58.41 | — | 4,115.8 | 2,40,403.88 |
| 75 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 7 | 5,781.35 | 40,469.45 |
| 76 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 3 | 5,540.55 | 16,621.65 |
| 77 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 2 | 6,941.3 | 13,882.6 |
| 78 | One urinal basin with 5 litre white P.V.C. automatic flushing cistern | Each | 3 | 5,268.85 | 15,806.55 |
| 79 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps | Each | 3 | 2,040.85 | 6,122.55 |
| 80 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. | Each | 3 | 1,411.15 | 4,233.45 |
| 81 | 50 mm nominal dia Pipes | Metre | 50 | 927 | 46,350 |
| 82 | 15 mm nominal dia Pipes | Metre | 50 | 441.15 | 22,057.5 |
| 83 | 20 mm nominal dia Pipes | Metre | 20 | 513.75 | 10,275 |
| 84 | 25 mm nominal dia Pipes | Metre | 50 | 626.05 | 31,302.5 |
| 85 | 32 mm nominal dia Pipes | Metre | 25 | 712.75 | 17,818.75 |
| 86 | 15 mm nominal bore | Each | 13 | 303.85 | 3,950.05 |
| 87 | 15 mm nominal bore | Each | 8 | 303.85 | 2,430.8 |
| 88 | 25 mm nominal bore | Each | 3 | 532.35 | 1,597.05 |
| 89 | 50 mm nominal bore | Each | 3 | 878.25 | 2,634.75 |
| 90 | 15 mm nominal bore | Each | 5 | 85.2 | 426 |
| 91 | 150 mm diameter | Each | 3 | 190.1 | 570.3 |
| 92 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Litre 5000 | — | 9.7 | 48,500 |
| 93 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) | Kg | 200 | 433.95 | 86,790 |
| 94 | With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | Sqm | 35 | 1,019.8 | 35,693 |
| 95 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). | Kg | 325 | 560.85 | 1,82,276.25 |
| Schedule total | ₹3,52,75,265.16 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Tender Document
ATTACHMENT
TenderNo.NER-BSB-RSP-2026-07.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .