Estimate for repair and renovation of Kothi no. 2 in Canal Colony, Jalandhar

Amount

Distempering with dry distemper of approved manufacture two or more coats over one priming coat to give an even shade (inner portion)

Finishing walls with exterior decorative cement based such as snowcem, robbiacem etc. two or more coats to give an even shade (Outside Kothi)

scraping © cement plaster

12.5 mm thick cement plaster 1:4

Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete.

12.5 mm thick cement plaster 1:3 on floors

cement rendering on plaster 1 mm thick

Factory manufactured flush door fixed in position iron hinges , etc ( excluding the cost of any fittings other than specified above but including labour for fixing the same in position ( a ) commercial with elm or gurjan facing on both / sides laminated core and lipped edges:- (iv) 35 mm thick

Wire Gauge Imported teak wood door shutter without springs housed in chowkats. (30 mm thick)

Applying pink primer or aluminium priming coat on wood work including preparation of surface.

Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect (b ) Glazing area above 0.09 sqm (iii) 5 mm thick plate glass (INDIAN)

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Painting two or more coats with synthetic enamel paint in all shades on old wood work or metallic or plastered, concrete surface to give an even shade including rubbing down old paint.

Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-incharge) in PVC Water storage tanks complete in all respect. (a) G.I. tank nipple 15 mm i/d

Providing and fixing in position Wire Gauge 22 gauge 12x12 mesh of (140 G gauge) at site of work.

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.

Painting new letters and figures of black synthetic enamel paint to an even shade.

Providing and laying 50 mm thick factory made cement concrete interlocking paver block of M-30 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge for Non traffic Areas and streets having width less than 3.05 mt. ( Also not to used over footpaths).

Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge ) complete in all respect. (C.P. brass Bib cock self closing)

Providing and fixing in position 15mm C.P. Pillar cock foam flow of approved make (to the approval of Engineer-in-charge)

SUPPLY AND ERECTION OF WIRING ACCESSORIES: Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.,:- (xii) 6/10amp. Two Way Modular Switch (One Module)

(xviii) Step type Modular Electronic Fan Regulator 100watts (One Module)

(xxvii) Bakelite Batten Holder (Large size)

(xiv) 6/10amp. One Way Modular Bell Push (One Module)

(xvi) 16/20amp. Universal Modular Shuttered Socket (two Module)

(xxvi) Ceiling Rose (Flush Piano type)

XLPE INSULATED UN-ARMOURED CABLES (ON SURFACE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:- (i) Overall size 6sq.mm (2Core) Un-armoured (On-Surface)

Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position

Providing and fixing jet spray with 2'-6" long PVC pipe.With C.P. Brass nut

Providing and fixing plastic hygenic seat cover with lid complete. Plastic Seat Cover Premium star white/pastel/special colour.

Providing and fixing PVC accessory fittings in Chinaware flushing cistern 10 Litres capacity complete.

Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. C.P.brass 15mm stop cock Male and female end.

Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-incharge) in PVC Water storage tanks complete in all respect.G.I. tank nipple 15mm i/d.

Providing and fixing in position C.P. brass overhead shower 1 flow without shower arm with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect.

Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.

Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete. 20mm i/d Brass Ball valves.

Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. 20mm i/d G.I. Union.

Providing and fixing Aluminium cup boards in kitchen and rooms including shelves in all respect

Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -incharge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank.

Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. (C.P brass towel ring)

Providing, laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B Class including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. (20mm i/d).

Dismantling, disjointing, removal of G.I. pipe lines, specials, valves and fittings complete in all respects. (20mm internal diametre pipe line.)

Providing and fixing in position Cast Iron Foot valves flanged ends with rubber sheat as per IS 4038 including cost of Nut Bolt , rubber insertion complete in all respect (50mm i/d Cast Iron Foot valves).

Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. (PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut)

Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete (ISI designation no 1 (Size of door up to 700mm))

Providing and fixing curtain rail 1.90cm chrome-plated with end bracket. Including sockets and brackets.

Chowkats of commercial hard wood such as Hollock confirming to ISI specification no. 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops, bolts for hold fasts etc, complete fixed in position (Section 60mm x 150mm) Double Rebate (60mm x 150mm) (60mm x 150mm)

Single Rebate (60mm x 100mm)

Providing Polyester Powder coating 50 micron any coloured specified to alumnum fittings various sizes including carriage of material from market to workshop & workshop to site of work.. Tower Bolt 100mm to 300 mm Long

Sliding Bolt all Sizes

Handles all Sizes

Door Stopper

Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect.

Kota stone slab 20-25 mm thick flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

Dismantling cement conglomerate floors 25 mm to 50 mm thick without concrete base

Conglomerate floor 50 mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material.

Providing & fixing glass strips 4mm thick in floors (a) 50 mm wide

Dismantling brick work tile, masonry or tile lining (In cement)

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil. In Ordinary soil (Depth upto 3 m).

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth.

First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level.

Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect.

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm, 100x200mm, 200x200mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

MINIATURE CIRCUIT BREAKERS/ RCBO's/ RCCB's: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-

PLASTIC DISTRIBUTION BOARDS: Supply and erection of Plastic enclosure DB's of various sizes on surface on wall for mounting MCB's SP/ DP/ FP including fixing and other petty material etc.:-

Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. Single Socket Type B. 110 mm o/d SWR UPVC Pipe Line Laid Complete.

Cement concrete 1:5:10 With stone aggregate 40mm gauge (mixing by manual means)

Cement concrete 1:3:6 with stone ballast or shingle mixing by manual means

SYSKA Led Bulb

Orient electric LED batten 20 w

Orient electric ceiling fan

Bajaj exhaust fan

Round jali

Concealed disc

Dining table

Wooden bed double storage

Matress for bed

Any Other Item

THE KHANAURA BHARAT CO OP L AND C SOCIETY