Providing Foot Path and Playing Materials at Corporation Reserve Site at Arasu Paniyalar Nagar in Ward No 22 Of East Zone.

Clearing of jugle as per the departmental officers with intial lead and lifts and claening and levelling the site etc., complete.

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete

Cement concrete 1:4:8 (one cement, foure sand and eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15 cm thick and compacted,etc., complete complying with standard specification.

Reinforced Cement Concrete M20 (Mix 1:1 1/2:3, one part of cement, one and half parts of sand , three parts of 20 mm hard blue granite metal by volume, characteristic strength not less than 20 N/sqmm) machine mixed for all reinforced Cement Concrete works, including scaffolding, cost of all materials, machine mixing, vibrating, lifting, curing, labour charges for laying & finishing etc., but excluding the cost and fabrication of reinforcements and also excluding centering and formwork etc., complete complying with the relevant standard specifications.

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)

Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9"X43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification.

Plastering for New Brickwoirk surfaces using cement mortar 1:5(One part of cement, five parts of sand by volume) thickness 12 mm (average) for all internal/external surfaces for drains etc., finished smoothly to one level including curing etc., complete, at all leads and at all heights

Supplying and fabricating of reinforcement steel of all diameters for reinforced cement concrete works at all heights and depths including straightening, cleaning,cutting,ending, placing in position and binding, hoisting and welding if any including cost of power, electrodes etc, cost of annealed binding wire (18 gauge), providing overlaps, tying in position and providing necessary cover blocks for all works as per detailed drawings supplied (including chairs, cranks, lap rods, spacer bars, fan hooks etc.,) with the relevant standard specifications, complete for all leads & lifts.

Supplying and fixing of M.S Grills,Hollow channels and circular pipes of various sizes for fabrication works at all heights and depths including straightening, cleaning,cutting,bending, placing in position , hoisting and welding if any including all cost etc complete.

Painting the Wall Two Coats with approved colour Emulsion paint over One Coat of primer over Cement Plastered Wall surfaces etc., complete complying with standard specifications and as directed by the departmental officers.

Painting with Two Coats of approved colour Enemal paint over One Coat of primer over the New iron doors and gates surfaces etc., complete complying with standard specifications and as directed by the departmental officers.

Supply and fixing of 65mm dia GIpipe (Class'B')of 4metre length with 300mmx300mmx6mm MS base plate duly welded at the bottom and with concreting and constructionon masonary pedestal with MSbox of 30cmx20cmx10cm with angle iron frame work with door with lockandkey arrangements and with supply and fixing of 25WLED streetlight fitting with bulb and with supply and fixing of 16Afuse unit(500V),5ASP switch inside the MSbox and painting with suitable colour

Supply and laying of 2 x 2.5 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supplying and fixing of Ornamental benches of size 1.20mx0.45m each for leg and rest.The seat using 100mx25mm MS rectangular section of 14SWG and the leg using 50mm dia MS pipe of 3mm.The benches are treated with zinc chromate one coat and enamel paint two coats of three different colour finishing with attractively including all materials and labour charges etc. complete

Supply and fixing of two seater swing using 3m long 65mm dia MS pipe of 3mm thick.The slide supports are 3m long 50mm dia MS pipe of 3mm thick.Th 3 way sockets using 3mm MS plate and grip the entire unit rigidly.Two swing clamp with 'U'and 'S' hooks are provided to theswing seat made out of 25x25mm SS square tube of 14SWG with stainless steel plates of a grade 304 and size of 600mmx250mm of hooks are fitted with 8mm thick tested chain 2 nos of length 9.80M.the entire assembly is treated with zinc chromate one coat and enamel paint two coats of three different colousfinishing with attractively including all materials and labour charges etc. complete .

Supply and fixing of slide with Ladder part model using 2Nos of 35mm dia MS pipe of 14SWG for standing and sliding,platform sheet of size 0.45mx0.90xmade of SS sheet of 16SWG.sliding sheet of size 2.40m x0.45m made of SS sheet of 14SWG to a length of 4.50m for both sides.The entire assembly is treated with zinc chromate one coat and enamel paint two coats of three different colour finishing with attractively including all materials and labour charges etc. complete .

Supply and fixing of merry-go-round using MS pipe of 50dia and 4mm length of 1.80m height as central pipe and bearing assembly outerpipe size of 125mm dia and 8mm thick and the unit should be assembledto a length of 250MM The merry-go-round of 6 seater of 300mm x360mm square of 2mm length MS sheet and arms are welded made out of 20mmdia Ms pipeof SWG to a length of 1.80m each.The entire assembly is treated with zinc chromate one coat and enamel paint two coatsof three different colour finishing with attractively including all materials and labour charges etc. complete.

Supply and fixing of park model twin sea saw four seater using 65mm dia MS pipe of 3mm thick to a length of 4.90m and supported assemblybarsusing 50mm dia MS pipe of 3mm to a length of 2.10m each for 2nos.The four seater of circular type of 250mm dia SS sheet of 16SWG.The entire assembly is treated with zinc chromate one coat and enamel paint two coats of three different colour finishing with attractivelyincluding all materials and labour charges etc. Complete