PROVN OF NEW GARBAGE PIT AND CHAIN LINK FENCING AROUND OR MESS AT DABATHWA

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard/desnse soil surfaces formed to required slope, gradient, camber, and superelevation etc. complete all as specified.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations, laying of pipe and cables etc or for shafts, well cess pits, manholes,pier holes not exceeding 10 sqm on plan ,.including dressing/trimming sides and levelling/grading & ramming bottom of excavation and getting out in hard/dense soil complete all as specified.

Returning ,filling in , including spreading , levelling , watering and well ramming in layer not exceeding 25 cm thick in soft/loose soil complete all as specified.

Excavating in post holes in soft/ loose soil ( or similar holes) each n exc 0.5 cu.m. getting out, (except returning,filling in and ramming earth or broken rubble mixed with earth around , in layer not exceeding 25 cm, watering,) and removing surplus soil to a distance n.exc 50 M complete all as specified.

Removing excavated material ( soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.

M&L broken stone or boulder hardcore ( granite/basalt/trap) of gauge n exc. 63 mm , deposited , spread and levelled in layer n exc. 15 cm thick, watered and rammed to a true surface complete all as specified.

M&L plain cement concrete 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in foundations / mass concrete complete all as specified.

M&L Plain Cement concrete 1:3:6 type C2 using 40mm graded crushed stone aggregate in foundations, filling and mass concrete complete all as specified.

M&L plain cement concrete type B1 ( 1:2:4) using 20 mm graded stone aggregate as lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in (roof kerbs or mud stops, rounded or cmamfered on edges), water troughs and the like including weathering , slightly rounded or chamfered angles and throating, as directed including necessary formwork complete all as specified.

M&L Brick work with old size fly ash bricks., straight or curved on plan exc 6 m mean radius , built in CM 1:4, complete all as specified and directed.

S&F Wire netting of stainless steel wire 1.40 mm dia. , 25 mm mesh fixed with tinned tacks of stainless steel wire staples complete all as specified. ( Note : Wooden beads/ steel flats shall be measured and paid separately as S&F)

M&L mild steel work as in hand rails, half round or other stock section or core for wooden hand rail straight portion , drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing or post and runners etc. for fixing metal bean etc including cutting tops to shape as directed, drilling holes, notching for wire , etc.; flat iron fillets and round bars ( for securing wire mesh etc. including all necessary drilling , bolting or rivetting , etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified.

M&L mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks; cooler stands and similar work conforming to Fe-290 Gde E-165 complete all as specified.

M&L Mild screw bolts exceeding 12 mm in dia and not exceeding 20mm dia ( Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut , exc 30cm long complete all as specified.

M&L Rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-290( Gde-E-165) all as specified.

Fixing only chain link fencing including line wires/ ms bars by interweaving , any mesh , size and type to any type of standards , rails , straining bolts, fillets etc. including provision of binding wire complete all as specified.

Supply only Chain Link fencing made out ofmild steel wire galvanised ( hot dipped) weighing not exceeding 4 Kg/sqm complete all as specified and directed. (Note:- Weight of Chain link fencing shall be decided by a Board of Officers)

S&F Mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, and binding with and including GI mild steel wire not less than 0.90 mm dia. or securing with clips quality conforming to Gd. I IS-432 ( Part I) for strengthening of chain liank complete all as specified.

M&L Mild steel Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts , including,securing or tying at crossings with and Provision of galvanised mild steel wire , staples or steel pins etc. as directed ( each line wire to be measured) complete all as specified.

M&L Plain cement concrete type C2 (1:3:6), using 40 mm graded crushed stone aggregate,75 mm thick , as in plinth protection finished fair and even complete all as specified.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:4 complete all as specified.

M&L preparation of newly plastered surfaces of walls by brooming down and applying two coats of white wash on newly plastered surfaces including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

M&L preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paint over one coat of red oxide Zinc chrome primer complete all as specified.

M&L preparation of new steel surfaces of any description not otherwise described not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide Zn chrome primer primer complete all as specified.

mohanlal gupta

m/s gupta construction

M/S AGARWAL CONSTRUCTION CO.