REPAIRS TO SECURITY FENCING/COMPOUND WALLS AND GATES AND CONNECTED WORKS UNDER PHASE-III (U AND L DAHUNG, DUM DUM NALLA, MH, MRS OFFICES AND MESSES) OF AGE B/R UNDER GE TENGA.

Amount

Dismantling barbed wire fencibg in any description and an position including making coil, complete all as directed.

S&F galvanised 2 strand and steel barbed wire 2.24mm dia barbed with 2mm dia barbs and 75mm spacing and straining and fixing to any type of standard rails straining bolts, including typing securing or at crossing with galvanised mild steel wire staples or steel pins (each line wire to be measured)

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed

M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

M&L for mild steel round bars 10mm dia and over cut to length bent to shape required and fixing as required in fencing of Fe-410 W(gde-E-250) quality A or Fe 290 (gde-E-165).

Dismantling fencing wire mesh, any type complete all as specified and directed by engr in charge

Supply only chain link MS galavanised fencing as specified

Fixing only chain link fencing including line wires, and mesh size type of stadrads, rail straining bots etc size of mess 100x100mm 4mm dia wire, complete all as specified and directed.

S&F MS bolts machine made with hexagonal or square head one end and screwed the other or screwed both end n.ext 5 cm long, 12mm dia complete all as specified and directed.

M&L for preparation of newly or previously untreated steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide primer n exc 10 cm width or girth complete all as sprcified and directed

M&L for preparation of newly or previously untreated steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide primer exc 10 cm width or girth complete all as sprcified and directed

M&L for preparing surfaces of steel and iron work new of any description and girth at treated area n.exc .5 sq each and treated with Tar/ Coal tar black paint complete all as specified and directed.

Dismantlimg pre-cast RCC fencing post or struts embedded in concrete (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground, complete all as specified and directed.

M&L for PCC 1:3:6 type D-2 (using 40mm graded stone aggregate ) as in foundation filling or mass concrete, complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil complete all as specified and directed.

M&L for providing precast cement concrete B1 (1:2:4) using 12.5mm graded aggregate in columns, posts, boundary pillars, bed plates, with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in cement mortar 1:4 complete with joints to match complete all as specified and directed.

M&L for Providing precast cement concrete type B1 (1:2:4) using 12.5mm graded aggregate in louvres and jallies, 25mm thick (mea sured solid) , including all mould- ings but excluding frame (Pre cast frame shall be measured separately and paid for under item 04032)

Demolition of Reinforced cement Concrete of any description and in any position not otherwise specifically provided for

M&L for RCC nominal mix 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed.

Use & Waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter fair finishes complete all as specified and directed.

M&L for RCC Nominal mix 1:2:4 type B1(using 20m graded crushed stoe aggregate) as in columns, pillars, piers, posts and struts, complete all as specified and directed.

Use & Waste of Form work formwork to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and directed.

M&L for RCC 1:2:4 ( Nominal Mix) type B1(using 20m graded crushed stone aggregate) as in beams, Cantilever bems lintels over 1.5m span etc, complete all as specified and directed.

M&L for Use & waste of flat Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips , complete all as specified and directed.

All as per item no 25 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and directed.

Demolition of brick/precast concrete block walling built in cement mortar, complete all as directed.

M&L for precast cement concrete block (1:3:6 type C1, using 20mm graded crushed stone aggregate) masonry with solid blocks, exc. 10 cm in width and setting in mortar1:6, complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:6 on concrete surfaces of wall, finished the surface even and fair, complete all as specified and directed.

M&L preparation of new plastered surfces of wall and applying two coats of cement base paint over one coat of Alkali resistance primer, complete all as specified and directed.

M&L 10mm thick cement plaster in cement mortar 1:4 on fair faces of concrete surfaces and finished surface even and fair, complete all as specified and directed.

S&F for granite 18-20mm (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed.

M&L for wall clading colour ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match

M&L for preparation of old painted Surfaces of any description, n.exc 10cm in width or girth and applying one coat of aluminium paint complete all as specified and directed.

S&F Mild steel framed work such as grills, gratings, as for ornamental and intricate design gates side hung, including pintle hinges, stops, hand-made sliding bolts, etc confirming to Fe-290, Gde-E-165, complete all as specified and directed. .

Demolition of cement concrete (unreinforced) of any description including (below or above ground level), not exc. 15 cm thickness, including removal of rubbish from site, complete all as specified.

M&L for Hardcore of gauge n exc. 63 mm broken stone or boulders , deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all specified and directed

M&L for 100mm thick, plain cement concrete 1:4:8, type D-2, using 40 mm graded mechanically crushed stone aggregates,as in sub-base complete all as specified and directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment, complete all as specified and directed.

M&L for Screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes, completed all as directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade and pointed with grey cement and no pigment, complete all as specified and directed.

M&L for sand filling under floors as in cushioning to interlocking paver block, complete all as specified and directed.

M/S KARKIES CONSTRUCTION (BID ID -3361505)

M/S DHARAM SINGH TAMANG (BID ID -3361577)

M/S RAM AWADH SINGH (BID ID -3361681)

M/S R N ENTERPRISES (BID ID -3361680)

M/S ARGI ENTERPRISES (BID ID -3361538)

M/S SS ENTERPRISES (BID ID -3373241)