ADDITION/ ALTERATION AND SPECIAL REPAIRS TO EXISTING GI PIPELINE TO CPVC PIPELINE FROM BUILDING T-23 TO P-14 AND IMPROVEMENT TO BATHROOM / TOILET FITTINGS OF JUNIOR SAILORS IN-LIVING STEWARD DORMITORY AT INS MANDOVI UNDER AGE(I) MANDOVI

Amount

Taking down steel/ GI tubing and connections of 32 mm dia and over upto and including 75 mm dia complete all as specified and directed.

Supplying and laying of CPVC pipe SDR 11 & plain CPVC SDR 11 fittings of 50 mm dia in trenches complete all as specified and directed.

Supplying and laying of CPVC pipe SDR 11 & plain CPVC SDR 11 fittings of 40 mm dia in trenches complete all as specified and directed.

Supplying and laying of CPVC pipe SDR 11 & plain CPVC SDR 11 fittings of 32 mm dia in trenches complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth, not exc 10 sqm on plan and getting out in soft disintegrated soil complete all as specified and directed.

M & L for plain cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in foundation, mass filling etc complete all as specified and directed.

M & L for plain cement concrete 1:4:8 type D-2, using 40 mm graded stone aggregate as in foundation, mass filling etc complete all as specified and directed.

M & L for pre-cast cement concrete block masonry 1:3:6 type C1 (using 20mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 complete all as specified and directed.

Returning filling in including spreading, leveling, watering, well ramming in layers n.exc 25cm thick using excavated soft/ disintegrated rock complete all as specified and directed.

Removing excavated rock material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

S & F ball valve with handle suitable for CPVC pipe of 50 mm outer dia fixed with proper adhesive to make it leakproof complete all as specified and directed.

S & F ball valve with handle suitable for CPVC pipe of 32 mm outer dia fixed with proper adhesive to make it leakproof complete all as specified and directed.

S & F CPVC reducer TEE 50 x 50 x 32 mm complete all as specified and directed.

S & F CPVC reducer TEE 40 x 40 x 32 mm complete all as specified and directed.

S & F CPVC reducing coupler adaptor 40 x 32 mm complete all as specified and directed.

S & F CPVC reducing coupler adaptor 50 x 40 mm complete all as specified and directed.

Taking down chowkats or frames not exc. 1.5 sq m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S & F 100 mm X 63 mm size factory made FRP door frame, frame fixed on either side with 3 Nos MS flat iron 25mm x 3mm, cut to size and made to shape, fixed with hold fast after necessary tarring and sanding including 2mm thick FRP lamination, core madde of polyurethane foam/ high density (more than 40kg per cubic meter) cellular foam done in situ, second class wooden blocks provided to hold the fittings and fixed as per manufacturer's instructions complete all as specified and directed. Note: Size of the chowkats shall be inclusive of 2mm thick FRP lamination. Make.Delux/Omega

S & F factory made paneled FRP door shutter, 30 mm thick with 2 mm FRP lamination, top rail of size 30 x 150 mm, lock rail & bottom rail of size 30 x 150 mm with 12 mm thick panels of FRP section and box type construction as per IS 4020, core made of polyurethane foam / high density (more than 40 Kg per cubic meter) cellurar foam done in situ and fixed in position as per manufacturer's instructions complete all as specified and directed..

Taking down steel tubing and connections of 15 mm dia bore of pipe complete all as specified and directed.

Taking down steel tubing and connections of 20 mm dia bore of pipe complete all as specified and directed.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings of 20 mm dia on walls/ ceiling or laying in floors complete all as specified and directed.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings of 25 mm dia on walls/ ceiling or laying in floors complete all as specified and directed.

S & F in repairs stop valve of PTMT, any colour, high pressure screwed for iron pipe of 15 mm dia bore complete all as specified and directed. (Minimum weight 15mm - 90gms)

S & F in repairs pillar taps of PTMT, any colour, high pressure, screwed for iron pipe of 15 mm dia bore complete all as specified and directed. (Minimum weight 15mm - 110gms)

S & F in repairs bib tap standard of PTMT, any colour, high pressure screwed for iron pipe of 15 mm dia bore complete all as specified and directed. (Minimum weight 15mm - 90gms).

S & F in repairs vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and directed.

S & F in repairs PVC valveless, syphonic action type, flushing cistern, 10 litre capacity, low level, white, with inlet, ball valve, float and handle including brackets and 32 mm dia flush pipe of polyethylene of low or high density or PVC and connections to pipes and fixing of chain and pull, or lever, if any complete all as specified and directed.

S & F PVC connections of size 15 mm, 450 mm long with PTMT nuts complete all as specified and directed.

S & F in repairs PTMT soap dish of approximate size 160 x 160 x 90 mm embedded in wall complete all as specified and directed.

S & F in repairs swivel shower of PTMT any colour for fixing with pipe of 15 mm dia bore and shower arm of 15 mm size, 195 mm length with bend of 45 degree with flange of PTMT, any colour complete all as specified and directed. (Minimum weight of swivel shower and shower arm - 40gm eaCh)

S & F towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. (minimum weight - 190gm)

Dismantling water tanks of capacity exc 250 ltrs but n.exc 500 ltrs and removing to store complete all as specified and directed.

S & F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 500 litre, hoisted and fixed in position complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, for ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling complete all as specified and directed.

M & L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plastered wall surfaces and applying three coats of white wash complete all as specified and directed.

S & F aluminum powder coated window/ ventilator shutter including frame, any type (sliding or open-able) with frame, & other similar work etc fabricated by using the JINDAL / CENTURY sections including necessary arrangement to receive 4mm thick sheet glass or wiremesh with aluminium channel beading, stainless steel screws, rollers, maruti lock & F frame including the cost of rubber gasket / rubber beading rollers, etc complete all as specified and directed. Note: Sheet glass & wire mesh shall be measured & paid separately. Note: Weight of the rubber gasket / beading rollers, maruti lock will not be measured with weight of aluminium shutter

S & F 4 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

M & L for preparing old plastered celing surfaces and applying one coat of white wash complete all as specified and directed.

M & L for preparation of old plastered wall surfaces and applying one coat of white wash complete all as specified and directed.

S & F ball valve with handle suitable for CPVC pipe of 25 mm outer dia complete all as specified and directed.

S & F tank adaptor suitable for CPVC pipe of 25 mm outer dia complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store complete all as specified and directed. (Measured overall as fixed along the centre line over fittings and accessories)

S & F PVC (SWR) pipes of 75 mm dia bore, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S & F PVC (SWR) pipes of 110 mm dia bore, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

M & L for PVC (SWR) multi floor trap with grating of 73 mm dia of outlet, including jointing with solvent cement, fixed in repairs complete all as specified and directed.

S & F PVC (SWR) bends with acess door, of any radius and 110 mm dia bore complete all as specified and directed.

S & F PVC (SWR) bends with acess door, of any radius and 75 mm dia bore complete all as specified and directed.

S & F PVC (SWR) junction single with acess door, (Single T) equal or unequal, of 110mm dia bore complete all as specified and directed.

S & F PVC (SWR) junction single with acess door, (Single T) equal or unequal, of 75mm dia bore complete all as specified and directed.

S & F PVC (SWR) vent cowl of 75mm dia bore complete all as specified and directed.

S & F PVC (SWR) vent cowl of 110mm dia bore complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position such as in bed for drain pipe etc complete all as specified and directed.

Demolition and breaking up of drain pipes (Salt glazed ware/ AC/ PVC) of 150mm/160mm dia, set in cement mortar complete all as specified and directed.

M & L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in concrete bed to 160 mm dia bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

S & F PVC (SWR) pipes of 160 mm dia bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M & L for precast cement concrete block masonry in precast cement cocrete 1:3:6 type C1 (using 20mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M & L for precast cement concrete 1:2:4 type B1, using 20mm graded stone aggregate in landings, cover slabs (for manholes etc.), chajjas, shelves and similar articles with plain faces set in CM 1:4 complete all as specified and directed.

M & L for TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for providing PCC 1:2:4, type B-1 using 20 mm graded aggregate as in manholes including necessary formwork complete all as specified and directed.

Raja Enterprises