HIDCO/AGM(E)IV/FR/NIT01/25-26

Amount

Supply and Installation of Executive Office Table with ERU and Pedestal from ISO 9001 : 2015, 45001: 2018, 14001:2015, 50001:2018 and 1348 :2016 certified companies which manufacture various products certified with BIFMA Level 2. Green Guard (UL), IAQ-conforming to indoor advantage gold, AIOTA, IGBC Platinum and GRIHA V.2019: 30. Overall Dimension : (WxDxH): 2100 x 2250 x 750 (all in mm). Primary Work Surface: Made of 25mm thick MDF-one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Soft closing access flap with in-build power box are provided on work surface for wire management. Secondary Work Surface: Made of 25mm thick MDF-one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Modesty Panel: Made of 25mm thick MDF-one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Under-structure: Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming toIS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal: Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF-one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 ΜΜ. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security, as per approved drawing & direction of Engineer in Charge.

Supply and Installation of High Back Chair with Headrest from ISO 9001 : 2015, 45001: 2018, 14001:2015, 50001:2018 and 1348 :2016 certified companies which manufacture various products certified with BIFMA Level 2. Green Guard (UL), IAQ-conforming to indoor advantage gold, AIOTA, IGBC Platinum and GRIHA V.2019: 30. Overall Dimension : (WxDxH): 750 x 750 x 1093-1244 (all in mm). SEAT/BACK ASSEMBLY: The Cushioned seat assembly consists of seat outer (material-30% Glass Fiber Nylon) & upholstered Seat inner (material- Poly Propylene) with moulded Polyurethane foam & polyster fabric. The Net Back is made up of Back outer (material-Glass Fiber Filled Nylon) & Back inner (material-PP) and upholstered using Polyester Mesh fabric wth high tenacity yarn. * Full Back Size: 46.5 cm. (W) x 60.0 cm. (H)*Seat Size: 51.0 cm. (W) x 49.0 cm. (D). 2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR Polyurethane foam is moulded with density = 45 +/- 2 kg/m³ and Hardness load 16 +/-2 kgf as per IS:7888 for 25% compression. 3. BACK SPINE: The support spine is made up of High Pressure Die cast polished Aluminium. 4. ARMRESTS: The armrest is having two adjustment, Height (6.0±0.5cm) and Depth (6.0±0.5cm). Height adjustment is provided in Aluminium structure of armrest which is connected to Aluminium Back spine and is operated by button. The depth adjustment is provided in pad which is fixed to armrest structure. Armrest Top is made up of PU molded over plastic inner. 5. ACTIVE BIO-SYNCHRO MECHANISM : The adjustable tilting mechanism is designed with the following features: 360° revolving type . Front-pivot for tilt with feet resting on ground & continious lumber support ensuring more comfort Tilt tension adjustment can be operated in seating position 5 position Tilt limiter giving option of variable tilt angle to the chair. Seat/back tilting ratio of 1:2. The mechanism housing is made up of HPDC Aluminium & black powder coated (DFT 40 to 60 micron) .6. SEAT DEPTH ADJUSTMENT: Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 3.75±0.1 cm. 7. LUMBAR SUPPORT ASSEMBLY: The Lumbar suport assembly consists of lumbar spine (material-Glass Fiber Filled Nylon) which is fixed to Aluminium Back spine. The Lumbar pad (material- Poly Propylene) is fixed to lumbar spine through lumbar Pad support. Lumbar Support Assembly has height adjustment of 5.0±0.5cm. 8. NECKREST ASSEMBLY : The Neckrest assembly consists of upholstered Neckrest inner (material- Poly Propylene) with moulded Polyurethane foam & polyster fabric. Upholstered inner is fixed to Neckrest cover. Neckrest is fixed to Back assembly through Neckrest spine. Neckrest Assembly has height adjustment of 5.5 ± 0.5cm and Rotation Adjustment of overall 20° ± 2°. 9. PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3cm. AUTO-RETURN MECHANISM : The Conference room chair has an Auto-return mechanism to allow the user free movement while being seated and after use guides the upper structureto rotate back to its original position enabling all chairs around the table to be aligned. . PEDESTAL ASSEMBLY WITH CASTORS The pedestal is High Pressure Die cast polished Aluminium and fitted with 5 nos. twin wheel castors. The pedestal is 65.0 ± 0.5cm. pitch-center dia. (75.0 ± 1.0cm. With castors.). PEDESTAL ASSEMBLY WITH GLIDES (3002AC): The pedestal is High Pressure Die cast polished Aluminium and fitted with 5 nos. fixed glides. The pedestal is 65.0 ± 0.5cm.pitch-center dia. (70.5 ± 1.0cm. With glides.)TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in black PP having 6.0± 0.1cm wheel Diameter. Overall dimensions: WIDTH (W): 75.0 см. DEPTH (D): 75.0 см. HEIGHT (H): 109.3-124.4 СМ. SEAT HEIGHT (SH): 45.5-55.5 СМ. as per approved drawing & direction of engineer in charge. as per approved drawing & direction of Engineer in Charge.

Supply and Installation of Office Table with ERU and Metal Lockable Pedestal from ISO 9001 : 2015, 45001: 2018, 14001:2015, 50001:2018 and 1348 :2016 certified companies which manufacture various products certified with BIFMA Level 2. Green Guard (UL), IAQ-conforming to indoor advantage gold, AIOTA, IGBC Platinum and GRIHA V.2019: 30. Overall Dimension : (WxDxH): 1800 x 750 x 750 AND METAL PEDESTAL: 390 x 435 x 646 (all in mm).Main Worktop : Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Return Worktop : Made of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Modesty Panel : Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Legs: Cube legs are fabricated from MS ERW Tube of 50 mm x 25 mm x 1.2mm thick and 40 mm x 40 mm x 1.2 mm thick (as per IS: 7138). At the top surface of leg, support brackets of 3 mm thick HR (as per IS: 2062) are welded for fixing worktop. These are welded togesther by argo shield welding. This welded structure is coated with 50 micron epoxy polyester coating. At the base, a plastic cap with M8 molded insert is fixed, on to which a straight M8 leveler fitted which allows for adjustment of the height upto 50mm.Cross Members : Cross Members in Unitized T-2 Desk Series are made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). These are coated with 50 micron epoxy polyester coating. Cross Members are assembled by friction fit PDC joinery and grub screws. There are always two cross members for one table. Return Cross Members : Return Cross Member in Unitized T-2 Desk Series is made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138).Return Cross Member is assembled by friction fit PDC joinery and grub screws at one end and 3mm thick HR plate welded at other end. There is one return cross member for one table.Access Flap: Soft closing access flap is used in Unitized T-2 Desk Series.Provision for standard size of 8 module electrical (Anchor Roma) is offered.Access flap is made from Aluminum extrusion, PDC parts made from Aluminum , Alloy and plastic parts are made from Nylon 6 and wire brush with nylon bristles.Power Box : Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8 Module cutout provision for Anchor Roma). This is fixed with worktop along the depth at Access Flap position.Pedestals with legs - Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castors. KBPT with mousetray – metal & greenpro overall product standard. Note: All partitions and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 40 mm of uneven flooring. As per approved drawing & direction of Engineer In Charge.

Supply and Installation of High Back Chair from ISO 9001 : 2015, 45001: 2018, 14001:2015, 50001:2018 and 1348 :2016 certified companies which manufacture various products certified with BIFMA Level 2. Green Guard (UL), IAQ-conforming to indoor advantage gold, AIOTA, IGBC Platinum and GRIHA V.2019: 30. Overall Dimension : (WxDxH): 763 x 763 x 995-1105 (all in mm). *SEAT SIZE (FOR 7501RG, 7502RG, 7512RG): 47.0 cm. (W) x 48.0 cm. (D). 2. BACK ASSEMBLY: The back asembly is made of powder coated (DFT 40-60 microns) tubular frame of Ø 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back is upholstered using Net fabric with high tenacity yarn. *7501RG - HIGH BACK SIZE: 46.5 cm (W) x 70.5 cm (H). 3. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density =45+/-2 kg/m³ and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. 4. ARMRESTS: The one-piece armrests are injection moulded from black Co-polymer Polypropylene. 5. CENTRE-TILT MECHANISM : The mechanism is designed with the following features: 360° revolving type. 17° ±2° maximum tilt on pivot at centre .Upright position locking. Tilt tension adjustment. 6. PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. 7. TELESCOPIC BELLOW ASSY : The bellow is 3 piece telescopic type and injection moulded in Black Polypropylene. 8. PEDESTAL ASSEMBLY : The pedestal is injection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal is 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors.) 9. TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon as per approved drawing & direction of Engineer in Charge.

Supply and Installation of Sliding Storage from ISO 9001 : 2015, 45001: 2018, 14001:2015, 50001:2018 and 1348 :2016 certified companies which manufacture various products certified with BIFMA Level 2. Green Guard (UL), IAQ-conforming to indoor advantage gold, AIOTA, IGBC Platinum and GRIHA V.2019: 30. .Overall Dimensions should be 900mm(W)x450mm(D)x1192.5mm(H) .The top should be be wooden top PLB(25 mm add in unit height ) . The Rigid Knock Down Construction , Back , Sides and Door should be be made from 0.7 mm high yield strength CRCA ,rest in 0.8 mm CRCA . CRCA - 'D' Grade as per should be -513 . Sliding door arrangement should be have sliding door wth top hanging arrangement to prevent derailment . Each door should be be provided with 2 plastic roller having steel ball bearing for smooth movement of door & less noise . Locking should be be 5 lever cam lock for safe locking . Handle should be be plastic flush & recessed handle . Shelving should be have Height wise adjustable shelf mounting . Uniformly Distributed Load Capacity of the shelf should be 40 Kg maximum . VSDU - 5 should be have 2 no. of adjustable full shelves . Accessories optional should be be cradle with pipes for hanging godrej instadex files . Leveler should be be screw type leveler with hex plastic base and overall finish should be be epoxy polyester coated to the thickness of 50 microns . For VSDU 5 - A4 size box file can be stored vertically on two shelves and clear space above third shelf should be 295 mm as per approved drawing & direction of Engineer in Charge.

Supply and Installation of Office Table with Metal Lockable Pedestal from ISO 9001 : 2015, 45001: 2018, 14001:2015, 50001:2018 and 1348 :2016 certified companies which manufacture various products certified with BIFMA Level 2. Green Guard (UL), IAQ-conforming to indoor advantage gold, AIOTA, IGBC Platinum and GRIHA V.2019: 30. Overall Dimension :(WxDxH): 1500 x 750 750 (all in mm).Worktop: Made of 25mm Thick Pre-laminated board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Access Flap provided on work surface for wire management.Modesty Panel Legs : Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Cube legs are fabricated from MS ERW Tube of 50 mm x 25 mm x 1.2mm thick and 40 mm x 40 mm x 1.2 mm thick (as per IS: 7138). At the top surface of leg, support brackets of 3 mm thick HR (as per IS: 2062) are welded for fixing worktop. These are welded together by argo shield welding. This welded structure is coated with 50 micron epoxy polyester coating. At the base, a plastic cap with M8 molded insert is fixed, on to which a straight M8 leveler fitted which allows for adjustment of the height upto 50mm. Cross Members Cross Members in Unitised T-2 Desk Series are made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). These are coated with 50 micron epoxy polyester coating. Cross Members are assembled by friction fit PDC joinery and grub screws.There are always two cross members for one table.Access Flap :Soft closing access flap is used in Unitized T-2 Desk Series. Provision for standard size of 8 module electrical (Anchor Roma) is offered.Access flap is made from Aluminum extrusion, PDC parts made from Aluminum Alloy and plastic parts are made from Nylon 6 and wire brush with nylon bristles. Power Box : Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8 Module cutout provision for Anchor Roma). This is fixed with worktop along the depth at Access Flap position.Pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castors. KBPT with mousetray – metal & greenpro overall product standard. Note: All partitions and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 40 mm of uneven flooring as per approved drawing & direction of Engineer In Charge.

Supply and Installation of Office Table without PEDESTAL from ISO 9001 : 2015, 45001: 2018, 14001:2015, 50001:2018 and 1348 :2016 certified companies which manufacture various products certified with BIFMA Level 2. Green Guard (UL), IAQ-conforming to indoor advantage gold, AIOTA, IGBC Platinum and GRIHA V.2019: 30. Overall Dimension :(WxDxH): 1500 x 750 750 (all in mm).Worktop: Made of 25mm Thick Pre-laminated board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Access Flap provided on work surface for wire management.Modesty Panel Legs : Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Cube legs are fabricated from MS ERW Tube of 50 mm x 25 mm x 1.2mm thick and 40 mm x 40 mm x 1.2 mm thick (as per IS: 7138). At the top surface of leg, support brackets of 3 mm thick HR (as per IS: 2062) are welded for fixing worktop. These are welded together by argo shield welding. This welded structure is coated with 50 micron epoxy polyester coating. At the base, a plastic cap with M8 molded insert is fixed, on to which a straight M8 leveler fitted which allows for adjustment of the height upto 50mm. Cross Members Cross Members in Unitised T-2 Desk Series are made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). These are coated with 50 micron epoxy polyester coating. Cross Members are assembled by friction fit PDC joinery and grub screws.There are always two cross members for one table.Access Flap :Soft closing access flap is used in Unitized T-2 Desk Series. Provision for standard size of 8 module electrical (Anchor Roma) is offered.Access flap is made from Aluminum extrusion, PDC parts made from Aluminum Alloy and plastic parts are made from Nylon 6 and wire brush with nylon bristles. Power Box : Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8 Module cutout provision for Anchor Roma). This is fixed with worktop along the depth at Access Flap position as per approved drawing & direction of Engineer In Charge.

Supply and Installation of Mid Back Chair from ISO 9001 : 2015, 45001: 2018, 14001:2015, 50001:2018 and 1348 :2016 certified companies which manufacture various products certified with BIFMA Level 2. Green Guard (UL), IAQ-conforming to indoor advantage gold, AIOTA, IGBC Platinum and GRIHA V.2019: 30.1.SEAT ASSEMBLY: The seat assembly should be made up of 1.2 ±0.1cm. thick hot-pressed plywood , upholstered with fabric upholstery covers and moulded Polyurethane foam.SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D)2.BACK ASSEMBLY: The back asembly. should be made of powder coated (OFT 40-60 microns)tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn.BACK SIZE : 46.5 cm (W) x 60.5 cm (H) 3.HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression.4.ARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. 5.CENTRE-TILT mechanism: The mechashould be m should be designed with the following features: * 360° revolving type. * 17° ±2° maximum tilt on pivot at centre. * Upright position locking.Tilt tension adjustment. 6.PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 11.0 ±0.3cm. 7.TELESCOPIC BELLOW ASSY: The bellow should be 3 piece telescopic type and injection moulded in Black Polypropylene.8. PEDESTAL ASSEMBLY: The pedestal should be injection moulded in black 33% glass-filled Nylon66 and fitted with 5 nos. twin wheel castors. The pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3 ±1.0cm with castors.)9. TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black nylon as per approved drawing & direction of Engineer In Charge

Supply and Installation of Storage from ISO 9001 : 2015, 45001: 2018, 14001:2015, 50001:2018 and 1348 :2016 certified companies which manufacture various products certified with BIFMA Level 2. Green Guard (UL), IAQ-conforming to indoor advantage gold, AIOTA, IGBC Platinum and GRIHA V.2019: 30. Overall size should be be 916mm(W)x486mm(D)x1981mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components should be have a thickness of 0.9mm. These components should be be made of CRCA ‘D’ grade high yield strength as per should be :513. It should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which should be have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing should be include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options should be be available as per approved drawing & direction of Engineer in Charge.

Supply and Installation of CONFERENCE TABLE from ISO 9001 : 2015, 45001: 2018, 14001:2015, 50001:2018 and 1348 :2016 certified companies which manufacture various products certified with BIFMA Level 2. Green Guard (UL), IAQ-conforming to indoor advantage gold, AIOTA, IGBC Platinum and GRIHA V.2019: 30. Work Surface-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to should be -12823:1990, Edge banded with matching 2 mm thick PVC lipping.Plastic ABS access flap should be provided for easy access to wires and cables. Work top should be available in various shapes.Understructure-It consist of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to should be -12823:1990, Edge banded with matching 2 mm thick PVC lipping.Aluminium alloy 63400 - WP profile should be used for connecting panels together. The product has a knock-down construction.Modesty Panel-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to should be -12823:1990, Edge banded with matching 2 mm thick PVC lipping.Powder coated accent metal strip provided below work surface to enhance aesthetics. It should be made of 0.8mm CRCA as per should be 513,epoxy polyester powder coated (DFT 40-60 microns).Wire Management-An array of panels made of 0.8mm CRCA MS should be :513, epoxy polyester powder coated (DFT 40-60 microns) should be used for flow of wires and cables. Provision to mount Anchor Roma 6 module plate should be provided below worktop. Cutout on top with two piece injection moulded plastic part polymer component should be fitted to pull out audio,video cables onto worktop and connect devices charger to power socket below worktop as per approved drawing & direction of Engineer in Charge.

Supply and Installation of Mid Back Chair from ISO 9001 : 2015, 45001: 2018, 14001:2015, 50001:2018 and 1348 :2016 certified companies which manufacture various products certified with BIFMA Level 2. Green Guard (UL), IAQ-conforming to indoor advantage gold, AIOTA, IGBC Platinum and GRIHA V.2019: 30. Overall Dimensions of Chair: Seat Height - min 45.5 to max 55.5cm.Height - min 95.5 to max 105.5 cm.Width & Depth of Chair as measured from pedestal - Width-75.0 cm and Depth-75.0 cm.SEAT/BACK ASSEMBLY: The Cushioned seat assembly consshould be ts of seat outer (material-30% Glass Fiber Nylon)& upholstered Seat inner (material- Poly Propylene) with moulded Polyurethane foam & polyster fabric. The Net Back should be made up of Back outer (material-Glass Fiber Filled Nylon)& Back inner (material- PP) and upholstered using Polyester Mesh fabric with high tenacity yarn. Full Back Size: 46.5 cm. (W) x 60.0 cm. (H), Seat Size : 51.0 cm. (W) x 49.0 cm. (D).HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR Polyurethane foam should be moulded with density = 45 +/- 2 kg/m³ and Hardness load 12 +/- 2 kgf for 25% compression.BACK SPINE: The support spine should be made up of High Pressure Die cast polished hed Aluminum.ARMRESTS : The armrest should be having two adjustment, Height (6.0±0.5cm) and Depth (6.0±0.5cm). Height adjustment should be provided in Aluminum structure of armrest which should be connected to Aluminum Back spine and should be operated by button. The depth adjustment should be provided in pad which should be fixed to armrest structure. Armrest Top should be made up of PU molded over plastic inner.ACTIVE BIO-SYNCHRO mechanism: The adjustable tilting mechanism should be designed with the following features:• 360° revolving type• Front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfort• Tilt tension adjustment can be operated in seating position• 5 position Tilt limiter giving option of variable tilt angle to the chair• Seat / back tilting ratio of 1:2• The mechanism housing should be made up of HPDC Aluminum & black powder coated (DFT 40 to 60 micron)SEAT DEPTH ADJUSTMENT: Seat depth adjustment should be integrated in the seat through a sliding mechanism. Seat depth adjustment range should be of 3.75±0.1 cm.LUMBAR SUPPORT ASSEMBLY: The Lumbar support assembly should consist of lumbar spine (material-Glass Fiber Filled Nylon) which should be fixed to Aluminum Back spine. The Lumbar pad (material- Poly Propylene) should be fixed to lumbar spine through lumbar Pad support. Lumbar Support Assembly has height adjustment of 5.0±0.5cm.PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3cm.PEDESTAL ASSEMBLY WITH CASTORS:The pedestal should be High Pressure Die cast polished Aluminum and fitted with 5 nos. twin wheel castors. The pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.)TWIN WHEEL CASTORS: The twin wheel castors should be injection moulded in black PP having 6.0± 0.1cm wheel Diameter as per approved drawing & direction of Engineer In Charge

Add GST @18% of total amount of Sl No-1 to 10

Add Construction Cess @1% of total amount of Sl No-1 to 10

SANKAR FURNITURE (BID ID -6327642)

SANDIPAN (BID ID -6329060)